# WLC RADIUS TO LDAP MONITORING SERVER SERVER. #

Similar Questions

• ISE 1.2 rejects 5508 WLC RADIUS messages

  The setup of ref is:

  WLC 5508 HA pair running 7.6 talk with ISE 1.2 patch 7 (a 6).

  Wireless users are authenticated very well, so the 5508 is a valid n in ISE, but...

  When I install active RAY of relief, so that the WLC can query the ISE Server I get the message:

  "The query a device no RADIUS wireless was interrupted because the installed license is for wireless devices only.

  Why the ISE spend a RADIUS of a WLC message which is a wireless device?  It is certainly a mistake?

  Hi Nicolas,.

  This is a known fault.

  CSCug34679    ISE drop keep alive from WLC.

  Symptom:
  ISE drops keep living authentications from the WLC, with message 11054 request from a device no wireless because of the license installed wireless.
  Conditions:
  When only licensed wireless is installed on the ISE and use current keep alive on the WLC.
  Workaround solution:
  Passive use keep alive on the WLC and non-active.

  Kind regards

  Jatin kone

  * Make the rate of useful messages *.

• problems with the IPCC monitoring server port

  I have 4.0 (4) IPCC Express Premium with Call Manager 4.1 (2). I have a server with two NIC a 'normal' IPCC and other oversight bodies. I have configured the port monitoring with a few other IP (172.16.255.10/24) and I set up RSPAN on switches. I see a call between officers and the appellants.

  But, after a reboot of the server, I get the error that my server will stop after a minute. I cann't see ane packages from monitor port. When I disable the port monitor and restart the server everything is OK and then I can activate the monitor port and everything is OK.

  I have nothing in the registry settings.

  What should do?

  Thank you

  I had the same problem as you and this has solved my problem.

• OpenManage, Performance monitor, Server 2008 error

  "We have Dell OpenManage IT Assistant Management Station:
  OS: Windows XP fi
  Program: IT Assistant, Version 8.2.0 (Station 5.4.0 management)

  Managed station: (client)
  OS: Windows Server 2008 Standard x 64
  Program: Management software 5.4.0

  'Monitoring of Performance and power' function allows us to monitor some basic usability.
  All servers use the same task to monitor. The free space of hard disk logical task monitor
  quantity among other things.

  One of our server (Windows Server 2008 x 64) free space Analyzer seems incorrect.

  We do not have any other Windows Server 2008 monitored by IT Assistant at the time.

  I think that these screenshots will help understand the problem.

  Photo 1
  Photo 2
  Photo 3
  Photo 4

  
  

• Proposal Setup infrastructure - Oracle database, LDAP, Weblogic Server, part operational

  Hello Experts!

  First of all, until I opened this topic I tried to search for similar positions that can hold at least part of the necessary information for me. This topic is that most related to the architecture of the whole system in the sense of the application that contains a part of database (oracle with data models database), the operational part (unix scripts called from the web interface), weblogic server where MS Java application runs and the last part is LDAP Setup for supported LDAP grups.

  Currently confirmed architecture is for me unacceptable from the point of view of dorsal because everything would be installed on the same physical server (physical machine). From my point of view, there should be at least 3 physical separate servers:

  (1) Server database where the Oracle database is installed (say ommit backup and disaster at this stage recovery)

  (2) operation of servers shared between several applications to manage operational tasks and application configurations

  (3) separate server for Weblogic server, the LDAP server and Java application is

  Given that 2 points are obvious to me and I provided them with really simplified form then 3. is not entirely clear to me mainly due to the fact that I am the architect of solution for datawarehausing, not for applications based on J2EE.  Under the following link:

  webloic Oracle server needs a server infrastructure

  I just read to support failover and balancing I should have two different boxes physical and Weblogic software installed on each of them. I know not so so many separate for the 3rd point above mentioned how boxes I need. I would appreciate if you can share your thoughts on this subject by considering the following points:

  -scalability (1000 users at the same time)

  -further development

  -maintenance

  -installation costs

  If you can guide also links to cover this topic, I'd be more than happy

  Thanks in advance!

  Kind regards

  Bolo

  
  

  Hi Bolo

  Here's WDM of Oracle Identity management includes the installation of OID:

  Content

  I'm sorry for the confusion.

  I meant "General guidelines of architecture of say that you should keep the boxes", for example: LDAP must be in another box of WLS, also database must be in a different area, this isn't really something related to Oracle products, it is only related to the definitions of architecture.

  WebLogic Server at the end being that a java application is running in the virtual machine JAVA, WLS should run in the same box as the JVM as it comes to a unit in terms of functionality.

  Best regards

  Luz

• Monitoring Server tools - advice, guidance, help please

  Hello

  First off let me say ESXI is incredible and flat works great!  I am an essential when it comes to vmware and I just finished the upgrade/migration of our entire company in a store of SBS2000 Server 2008 Standard THAT VM hosted in ESXI.  Let me tell you, configure ESXI hosts was the easiest part of this together lol.  I'm looking for a tool that can monitor the ESXI hosts and send alerts by e-mail/sms and or potentially stop VM.  For example: Say the air conditioner died an extremely hot day weekend and our machines are overheated.  Y at - it a tool that will alert via smtp/sms and initiate the command stop to our VM and then host PMs?  I am that it is difficult to understand how this is possible because I don't see how the software could run in a virtual machine and access "to the" actual conditions ESXI host material...  At least I'm looking for a tool that can send by e-mail/sms alerts if there is a problem then I'd be able to address the issue before any damage occurred.

  We currently have two hosts ESXI 4.0 on Dell PowerEdge T610 servers.  I used the ESXI version specifically for Dell servers (if that helps).

  Three virtual machines, two Server 2008 Standard, and Server 2008 R2.  If you know all the tools that would allow me to achieve what I mentioned above I would be very happy.  I did a good amount of research on the web but not found a solution that meets all our needs still.  It can be opened or payware.

  Thanks for your time,

  Dustin

  I use a temperature monitor unit http://www.temperaturealert.com/ it would take some scripts but J1mbo could be combined to create a clean shutdown.

  There are probably hundreds of things to worry about. Don't get too hung up on only one.

• Assignment of VLAN dynamic RADIUS ACS 5.2 Server with NAC

  We are trying to reduce the number of ssid in our network wireless with assignment of vlan dynamic with the acs. Our problem is that we use Cisco NAC so with assignments of vlan dynamic user will be checked by the NAC. Agent of Cisco sometimes pop up and do nothing to do or give a message cannot locate server. We even got an OOB error. Someone used a VLAN dynamics with the acs and the NAC successfully? The NAC is Out of Band

  Hello

  I supported oob nac and wireless and your efforts to make the dynamic assignment of VLANs will not work because of the way in which him vlan quarantine and access are mapped to this ssid.

  This work in in-band mode, however your design. This WLAN key needs to exist because the Manager sends the snmp trap to move the client from quarantine access.

  Just as a note, I'm sure you are aware is that ISE is the evolution of the acs and the NAC. Basically this your solution to reduce the skates and posturing of the customers.

  Sent by Cisco Support technique iPad App

• WLC RADIUS aid Questions

  We would like to set up RAY of relief to ensure RADIUS authentications always go their primary ACS so that it is available, but the documentation is not very clear regarding the configuration of the user name.

  There is no mention of a password, but if you enable backup - even with the username default "cisco-probe", the failures of this account appear on the ACS server log, so I guess it doesn't.

  Can someone shed some light on how exactly this "cisco-probe" should work?

  Thank you!

  Fold in three ways:

  discount - no help

  passive - WLC sends the credentials to the server 'death' when a user tries to authenticate

  -You set up a user name and an interval.  WLC sends the credentials to the server 'death' at configured intervals.

  The password did not really, just that the WLC retrieves a package.  So getting back a rejection of the server would bring it "alive" in the list to the AAA.

  make sense?

  HTH,
  Steve

  ------------------------------------------------------------------------------------------------
  Please don't forget to rate helpful messages and mark the questions answers

• For users remote if RADIUS or ldap services available VPN servers are not there?

  Dear people,

  I have ASA Adaptive Security Appliance 5510 with below features.

  Now, what is the best way to setup VPN for remote users to securely, if I have no services LDAP or Radius server.

  HOFW # sh flash:

  path-# - length - time -.

  181 14137344 March 3, 2003 08:36 asa804 - k8.bin

  195 436 sep 2012 01 16:28:05 bar.emf

  75 4096 November 10, 2011 18:41:26 login

  192 1335 November 10, 2011 18:41:26 log/recovery-event.388.20111110.131127

  79 4096 19 January 2009 16:12:34 crypto_archive

  182 7562988 19 January 2009 16:14:06 asdm - 613.bin

  184 4863904 19 January 2009 16:15:44 securedesktop_asa_3_3_0_129.pkg.zip

  185 4096 19 January 2009 16:15:46 sdesktop

  194 1462 19 January 2009 16:15:46 sdesktop/data.xml

  186 2153936 19 January 2009 16:15:46 anyconnect-victory - 2.2.0133 - k9.pkg

  187 3446540 19 January 2009 16:15:48 anyconnect-macosx-powerpc - 2.2.0133 - k9.p

  kg

  188 3412549 19 January 2009 16:15:50 anyconnect-macosx-i386 - 2.2.0133 - k9.pkg

  189 3756345 19 January 2009 16:15:52 anyconnect-linux - 2.2.0133 - k9.pkg HOFW # sh flash:
  path-# - length - time -.
  181 14137344 March 3, 2003 08:36 asa804 - k8.bin
  195 436 sep 2012 01 16:28:05 bar.emf
  75 4096 November 10, 2011 18:41:26 login
  192 1335 November 10, 2011 18:41:26 log/recovery-event.388.20111110.131127
  79 4096 19 January 2009 16:12:34 crypto_archive
  182 7562988 19 January 2009 16:14:06 asdm - 613.bin
  184 4863904 19 January 2009 16:15:44 securedesktop_asa_3_3_0_129.pkg.zip
  185 4096 19 January 2009 16:15:46 sdesktop
  194 1462 19 January 2009 16:15:46 sdesktop/data.xml
  186 2153936 19 January 2009 16:15:46 anyconnect-victory - 2.2.0133 - k9.pkg
  187 3446540 19 January 2009 16:15:48 anyconnect-macosx-powerpc - 2.2.0133 - k9.p
  kg
  188 3412549 19 January 2009 16:15:50 anyconnect-macosx-i386 - 2.2.0133 - k9.pkg
  189 3756345 19 January 2009 16:15:52 anyconnect-linux - 2.2.0133 - k9.pkg

  Concerning
  Vesta
  "Everybody is genius." But if you judge a fish by its ability to climb on a tree, he will live his entire life, believing that this is stupid. "

  With the ASA you will be somewhat limited in what you can do for remote-access-VPN.

  There are two ways to set that up:

  (1) using the SSL - VPN with the AnyConnect Client

  To do this, you must license Premium AnyConnect quite expensive for the amount of competitor users you plan to accept or AnyConnect Essentials cheap license which will give you 250 AnyConnect users which is the platform limit.

  But for the essential AnyConnect license, you need upgrade your ASA RAM because you need an ASA - latest operating system for it.

  But going this path will be the best option.

  (2) with the IPSec Client inherited (EasyVPN). The customer is EOL/EOS announced and not all development will get more. But for now, it could be a way to go until you upgrade your ASA.

  Here is an example of how to configure your ASA for the old CLient IPSec:

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a008060f25c.shtml

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• Several groups of RADIUS auth on a single Windows Server

  We have several groups RA VPN on a 3845 router.

  Authentication RADIUS which is currently happening between the 3845 and one Windows 2008 Server.  We have a group of specific windows which AD users are members, and they are allowed to connect through the VPN.

  I create a new group of VPN, which should only allow different users of the AD.  Is it possible to create another association of RADIUS on the same server, or do I need to authenticate to a different Windows Server?

  Thank you

  Tyler

  Hey Tyler,

  If I understand the question, here's what you have to say.

  There are several groups on the announcement. currently 1 user group special on AD connect very well to the RAVPN.

  Now you want to connected VPN or authorized for another group on AD. Basically, you want to control access to resources based on the groups that they belong to the advertising. Am I wrong?

  You use the aaa server is the RADIUS. I don't think you can do authentication and control of access based on the ad groups using RADIUS.

  I would say try LDAP.

  http://www.Cisco.com/en/us/docs/iOS/sec_user_services/configuration/guide/sec_cfg_ldap.html

  I hope this helps.

  Kind regards

  Anisha

  P.S.: Please evaluate the useful messages

• Dell Powerconnect 35xx series features Radius Server behaviorfin

  Hello Dell Community,

  I'm not able to find out how 35xx series switches handle 'server radius deadtime' parameter as described below:

  In the config of switch, I use two hosts(for redundancy) radius. The first has priority of '1' configured RADIUS, the second server is priority '2 '. So normally, if the first sever(priority 1) RADIUS online, auth requests switch are sent to this server all the time. And they really are.

  Now, I have also configured the 'deadtimet 10 radius server', meaning to jump on the radius server does not respond. Does that mean exactly?

  If the radius with priority 1 server is offline for a few seconds, the switch instantly consider this as dead radius server and sent no auth request it for the "period deadtime ' 10 minutes (depending on configuration)? How often switch check for the availability of the radius server host?

  config swtich:

  IP address Port port Prio time - Ret-dead-source IP. Its use
  AUTH Acct Out rans times
  --------------- ----- ----- ------ ------ ------ --------------- ----- -----
  10.10.10.10 1812 1813 global Global Global Global 1 all the
  10.10.10.20 1812 1813 global Global Global Global every 2

  Global values
  --------------

  Waiting period: 2
  Broadcast: 5
  Deadtime: 10
  Source IP: 0.0.0.0
  Source IPv6:

  Retransmission will say the switch many times in an attempt to authenticate to the RADIUS server before moving on to the second server. Timeout is indicative of the switch, the waiting time for a response. Deadtime will subsequently intervene in these two parameters have been exhausted.

  Example config:

  Server radius coverage of console (config) # 3

  Console (config) # timeout 3 radius server

  Deadtimet console (config) # 10 radius server

  Result of config:

  -The client tries to connect.

  -switch attempts to authenticate the server 1.

  -Switch means no RADIUS server 1 for 3 second.

  -Switch waits 3 seconds.

  -Switch attempts to authenticate to the RADIUS server 1 for the second time and does not return to server for 3 seconds.

  -Switch waits 3 seconds.

  -Switch attempts to authenticate to the RADIUS server 1 for the third time and does not return to server for 3 seconds.

  -switch place RADIUS server, one in a State of low/dead for 10 minutes.

  -switch attempts to authenticate to Server 2.

• WAAS for RADIUS and Windows Server 2012 NPS server configuration

  I have trouble getting our WAAS to authenticate devices and connection via RADIUS.  Running NPS on Windows Server 2012.  Confirmed that my device WAAS can ping the IP address of the RADIUS server.  Using the attribute Type of administrative service under network policies.  Look in the event viewer, I get an error with event ID 15, "a malformed RADIUS message has been received of the xxxx-WAAS-01 customer. The data is the RADIUS message. »

  Right now, I can connect with only the local default user and password name.  Here are a few config for WAAS, running version 6.2.1:

  RADIUS server key *.
  Server RADIUS auth-host 10.194.10.13 port 1645
  !
  connection of local authentication enable secondary
  enable login authentication RADIUS primary
  local authentication configuration enable secondary
  Service radius Authentication configuration Select primary
  failover of authentication server unavailable

  I confirmed that my shared key is entered correctly on the WAAS and the NPS.  I have the switches/routers Cisco works well on the same RADIUS server.

  Someone had a bit of luck plug their WAAS to RADIUS devices using Windows Server 2012 and NPS?  If so, please share additional measures you have taken to get things to work.

  Hi Paul,.

  Based on the RADIUS error you probably experience failure CSCva14731. This was discovered with Cisco ACS, but can affect other RADIUS servers.

  To confirm, you can check the corresponding error in syslog WAAS:

  authenticate: % WAAS-UNKNOWN-3-899999: pam_radius_auth: talk_radius: RADIUS server did not respond (timeout 5 (sec))

  Also, this defect would not affect peripheral on software 5.x WAAS.

  The problem will be solved in 6.2.3 to come free.

• AP541N cluster with Radius UC540 Server?

  Hi, so using the radius in the UC540W Server works a treat if the wireless network comes from the CPU area.

  But if the AP541 is serving the wireless network, I can not RADIUS to work.

  I have removed all my networks in the UC area and have disable the wireless interface (tried with the wireless active too).

  The local RADIUS is active and the installation program on the CPU area.

  But still nobody can join and authenticate!

  Any ideas or advice? Known issues?

  I followed all the directions to a tee!

  Hello Jeremy

  Thank you for contacting the Support Forums of community of Cisco.

  When you use a UC540W with an AP541N, it is suggested to not use the AP and turn off the wireless on the UC540W.

  To use Windows clients, the authentication server must support PEAP (Protected EAP) and MSCHAP V2. How is your Radius server in the setup of UC540W?

  To ensure that the radio itself works OK, can you, or have you tried to do just the WPA or WPA2 with regular encryption. See if you can connect, authenticate and roam the network.

  Please keep us informed.

  Eric Moyers
  Concentrix at Cisco. : | :. : | :. CISCO | Eric Moyers | Expert in the field. Cisco technical support |
  [email protected] / * /.
  Together, we are the human network

• ISE external radius server

  Hello

  Given that roam JRS servers must be put into a sequence of Radius to the ISE server, which IP node address is supposed to be registered with JANET, PAN or each address IP of PSN. I would have thought that it's the PAN because all external RADIUS servers are configured on the PLATEAU, but thought I should ask just to be sure. Thank you

  Yes, even if the configuration is on the PLATEAU, only ise nodes that have the political role of active service, will be used to transmit requests by using external radius proxy functionality.

• RADIUS server for authentication

  Hello

  I want to configure the radius server, so whenever someone tries to connect to a cisco (Telnet) switch, I want the radius to authenicate them server. Is this possible?

  Yes it is possible as long as you configure your switches to authenticate to the Radius server. To achieve this, you must use a feature called AAA. This feature is compatible with the protocols such as Radius, GANYMEDE +, to name a few. The following link will give you an idea on how to set it up on switches IOS based specifically on the 3550:

  http://www.Cisco.com/en/us/partner/products/hw/switches/ps646/products_configuration_guide_chapter09186a00801a6b15.html

  Make sure that apply you the authentication list to the vty lines to ensure that telnet access is authenticated with the radius server. FOT based CatOS switches than the following link will be useful:

  http://www.Cisco.com/en/us/Partner/Tech/tk583/TK642/technologies_tech_note09186a0080094ea4.shtml