AP541N cluster with Radius UC540 Server?
Hi, so using the radius in the UC540W Server works a treat if the wireless network comes from the CPU area.
But if the AP541 is serving the wireless network, I can not RADIUS to work.
I have removed all my networks in the UC area and have disable the wireless interface (tried with the wireless active too).
The local RADIUS is active and the installation program on the CPU area.
But still nobody can join and authenticate!
Any ideas or advice? Known issues?
I followed all the directions to a tee!
Hello Jeremy
Thank you for contacting the Support Forums of community of Cisco.
When you use a UC540W with an AP541N, it is suggested to not use the AP and turn off the wireless on the UC540W.
To use Windows clients, the authentication server must support PEAP (Protected EAP) and MSCHAP V2. How is your Radius server in the setup of UC540W?
To ensure that the radio itself works OK, can you, or have you tried to do just the WPA or WPA2 with regular encryption. See if you can connect, authenticate and roam the network.
Please keep us informed.
Eric Moyers
Concentrix at Cisco. : | :. : | :. CISCO | Eric Moyers | Expert in the field. Cisco technical support |
[email protected] / * /.
Together, we are the human network
Tags: Cisco Support
Similar Questions
-
Extend the current TMS Cluster with two new server
Hello
We currently have a cluster of two TMS-Server (13.2.1) installed on a W2K3 Server with a database on a SQL-Server separat
To have a smooth migration, we thought the following procedure.
Addition of two new server with W2K8 R2 by installing a TMS 13.2.1 to the cluster with access to the same database.
After a while remove the two old server and upgrade to TMS14 (updated TMSPE in advance).
Unfortunately, we get the message, as seen in the PNG-attachment during the installation of the first server in new.
Anyone know if we could proceed as described above?
Is the message because of the different operating system. If I click on 'Yes' former TMS-server still works?
Thank you
Concerning
Ingo
Hello
The error message is misleading and can be safely ignored, and you can continue with the installation of the new TMS nodes. It was deleted in 14.0 TMS, see bug CSCui34702.
Kind regards
Kjetil
-
Group of locking in the 3K concentrator with radius w2k server
I have 2 user group set in my hub 3K. I have no problem to authenticate the user using internal data base about locking group. When I change the method of authentication to the radius of w2K, any valid user with correct password passes the authentication that is not related to the actual group.
I met some documentation says that the radius server must pass the group information in these formats UO = groupname. How to set this on the shelf w2K?
Kind regards
Sam
Use the "CLASS" attribute to set the name of your group.
HTH
-
Add Server ESXi in Vcenter 5.5 cluster with a different number of socket
I have 5 nodes compute node IBM Flex System X 240 8737T7M with 2 CPU Socket in a VMS Cluster with identical hardware and now I need to add 1 more IBM System Flex X 240 node calculate 8737T7M with 1 CPU Socket in the same cluster.
Here are other points: -.
VCA Mode is disabled in this cluster.
5 existing and new are the same model of CPU and memory is of the same capacity.
Only the difference is 5 knots with 2 sockets and another node is 1. Please notice is recommended and he face any technical problem.
VMware ESXi 5.0 and Vcenter is 5.5
Hello
VCA mode is not required when the generations of CPU on the server is the same.
Adding your host in the cluster will work then.
He advised not to add servers to a cluster with mixed material config. A possible problem might be the Admission HA control for example settings. If you configure a number of hosts reserved for failover, you may encounter problems with your hosts do not match each other. Here, you define the ability to failover in percentage.
Tim
-
WiFi WPA2 Enterprise with RADIUS - connection problem
Hello
I have here a new ISA 570w with the latest firmware (1.2.17).
Anyway, I can't get wifi to work in mode WPA2 Enterprise with RADIUS authentication.
Mode WPA2 PSK are not a problem.
I have configured the BEAM properly and I can connect directly to him via NTRadPing without any problem. Also the test in the web interface works without any problem (see Figure 2, 3).
The RADIUS server is a server Synology RADIUS on a Synology NAS, which is a FreeRADIUS server under the hood.
In the settings of the ISA wireless, I put this RADIUS server for authentication (see screenshot 1, 4).
However, I can not connect to connect to the network:
On the iPhone (iOS 6.1.3) I get a prompt for a user name and password, but when I click on connect, it says 'connect to 'cisco3'... ". "and stays there.
In ISA 570w newspaper, he said:
Information
Wireless
MSG = add MAC station in the list of the ATU. VID = 5; MAC = 5 C: 59:48:02:78:3E;
Information
Wireless
MSG = Wireless mode is a 802.11 mixed b_g_n
When I cancel the connection attempt, he said:
Information
Wireless
MSG = the Client has dissociated;
On my Thinkpad with Windows 7 Professional I have everything configured as usual (see screenshots 5,6,7,8) but when I try to connect I do not get a command prompt where I wonder username and password, and finally the connection cannot be established (see Figure 9). Also tried with the same configuration on an another Windows 7 Pro installed costs for laptop with the same problem.
I can't see any attempt of 570w ISA to authenticate anything in the logs of the RADIUS.
Also the capture of network traffic on the LAN to the Synology NAS port does not show the RADIUS datagrams.
I already disabled COP because I read that it can cause problems, but it did not help.
Can you please suggest something else I can try?
Thanks in advance!
Kind regards
Dominik
I saw these screenshots, but that screen settings just select the button set up next to the authentication method in the section user authentication, under users. In each of your screenshots, the RADIUS server identification number is 1, so I would also ensure that I configured the server ID RADIUS 1 that can be configured by going to users-> RADIUS servers.
All that said, I have seen that your tests have passed and I also do not understand the point of having the RADIUS settings on other screens and then to have info ID RADIUS. My thought is that you'd be able to pre-set RADIUS users of-> screen RADIUS servers and then select the RADIUS server ID in all other screens without having to enter the RADIUS news over and over again. He also thinks that you could ignore the users-> screen RADIUS server and enter RADIUS information over and over again and it should work... as you set up initially. However, based on the past experience of programming errors, I recommend configuring the ID from RADIUS server 1 under user-> RADIUS servers if you have not already... just in case where.
Shawn Eftink
CCNA/CCDAPlease note all useful messages and mark the correct answers to help others looking for solutions in the community.
-
NAC integrated with the comment server
Hi all
I met a problem that happened when I joined NAC with the comment server.
Hope I can find the solution here!
When I create an account to the comment server, the account will be created in the NAC as a local user.
If I chose "time profile - start-end", the account will be created in the NAC.
But if I chose "Time profile - first Login", the account will not be created in the NAC.
If the guest cannot connect with this account using "time profile - first Login.
All configurations of the document including "Radius Client and Accounting" has been correctly configured.
But I can't yet find the solution.
Please answer me if you know the answer. Thank you very much!!!
Jet Li
If Taiwan
Hi Jet Li,
This should be because only based on time with beginning and end is supported when you turn on the END with the NAC Appliance solution:
http://www.Cisco.com/en/us/docs/security/NAC/guestserver/configuration_guide/20/g_guestpol.html#wp1063409"Cisco NAC comments Server Version 2.0 supports only start/end and creating profiles when used with Cisco NAC appliances"
Kind regards
Fede
--
If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it. -
Problem with RADIUS and VRF in Cisco 6500
Hello
I have the following config of the radius authentication:
AAA new-model
AAA authentication login default local radius group
AAA authorization exec default local radius group
AAA - the id of the joint session
IP source-interface Vlan31 vrf LEGACY RADIUS
Server RADIUS auth-port host 10.10.4.18 1645 1646 acct-port-key 7 XXXXXXXX
Server RADIUS auth-port host 10.10.5.15 1812 1813 acct-port-key 7 XXXXXXXX
RADIUS vsa server send accounting
RADIUS vsa server send authentication
The work of Don t of authentication
The sniffer radius server does not detect the Cisco 6500 packages, but the 6500 icmp packets do very well.
# Ping vrf LEGACY 10.10.4.18 SOUrce VLAN 31 C6500
Type to abort escape sequence.
Send 5, echoes ICMP 100 bytes to 10.10.4.18, wait time is 2 seconds:
Packet sent with a source address of 10.10.5.254
!!!!!
Success rate is 100 per cent (5/5), round-trip min/avg/max = 1/1/1 ms
interface Vlan31
XXXX description
IP vrf forwarding LEGACY
IP 10.10.5.254 255.255.254.0
no ip redirection
no ip proxy-arp
no ip mroute-cache
end
It has fix my configuration?
Can you help me?
What IOS version you run on your 6500?
Try the following:
AAA new-model
!
RADIUS AAA server group RADLegacy
10.10.4.18 server host
10.10.5.15 server host
IP vrf forwarding LEGACY
!
Group AAA authentication login default local RADLegacy
default AAA authorization exec RADLegacy local group
!
-
Hey everybody,
I'm with RADIUS AAA configuration on our Firewall remote ASA. It's pretty simple, but I have some firewall that does not work on. I upgraded the IOS image on the ASA 5510 to ASA804-K8. BIN on each of them. The weird part is some of them work and some of them do not work.
I was wondering if anyone else has encountered this before and what information do you need to give me a reference to help.
Thanks in advance,
Kimberly
Hi Kimberly,
just curious: why 8.0.4 and not 8.0.5?
What you use radius for? What is the radius server? You have configured all the ASAs of the radius servers? Did you use the right shared secret?
Is there something different between the ASAs working and does lack those? Configuration, location in the network, etc.?
If the above does not help, please post the config of ASA failure (or at least the relevant items and be sure to remove all sensitive data) and the output of:
Debug RADIUS
Debug aaa authentic
Debug aaa 254 Commons
You can test only the part of RADIUS with the command «test aaa-server authentication cli...» »
HTH
Herbert
-
Can this load balance and HA cluster with vsphere?
Hello community!
Really new on this type of subject, so forgive me if IAM iam do or say something wrong. I'm here to try to understand better this amazing tool so I apreciate your time and knowlodge!
Im trying to create a failover and balancing cluster with Vsphere, the goal is try to install an MSSQL DB server where the customer can access more quickly and do not have downtime when a node is down.I read a lot but still I can't have a full understand abt, so if anyone tries to explain something, please be patient and explain with precision.
All doing wrong if you really work at home as a LABORATORY, and I can do it, hurt trying to use it to get a job because I don't have and I really need one soon!
Here is my diagram is possible?Well ill to explain it, I have clients that will send a work for my DB load process, which will affect on MSSQL Server installed on the 12 TB logical drive created from the union of all methods virtual storage. Each virtual storage is just a virtual disk created on a virtual machine that is hosted on the physical server (node).
So I have 4 physical server which have 1 VM each with 3 TB of virtual disk, the goal is the customer can send the process of workload on 4 nodes to have a quicker response, and if a single node fails for any reason, the other node can operate withow problem.
physical server Medley: don't know yet if I have to use one or install VMWARE directly.
Sagna VM: Windows Server 2008 (don't know if necessary or if I can just install SQL Server directly)
MSSQL Server VM: 2008 Enterprise (still don't know if I have to use this one)
Well I can't think right now on the other details, but if you tell me ill be happy to write it.
Sorry if my writing or semantics is false but English is not my first language.
Really thanks to get to this point and share your knowlodge!
Best regards, josh of Argentina!
Josh, please correct me if I'm wrong, you have 4 knots of MS - SQL, and you need to read/write at the same time in a shared database of 12 to.
If this is the case check the following documents:
VMware KB: MSCS support improvements in vSphere 5.5
Clustering using VMDK sharing between virtual machines
https://www.VMware.com/PDF/vsphere5/R55/vSphere-55-configuration-maximums.PDF
The above covers the part of the diagram which includes 4 nodes SQL and the shared database, the other part of the client to the SQL nodes that segments the loads on the nodes, I think you should see Microsoft options.
I found a few relevant links below:
https://ask.SQLServerCentral.com/questions/51824/cluster-with-more-than-2-nodes.htm l
-
Cluster with VSphere Essentials
When I try to create a cluster with VSphere Essentials (no more) I'm offered HA and DRS (they are not greyed out, they are available). Are these trial versions that will be disabled in the future, or they are now included in Essentials?
My understanding is that they would be unavailable at all. that is, they would be gray.
To view your features under license:
- Open the vSphere Client and connect to your vCenter Server
- Select a host in your cluster
- Click the Configuration tab
- Click on the link "Features licensed" under the software
All licensed features are presented here. Search for "VMware HA" and "VMware DRS" see if they are allowed.
-
Add esx cluster with different cpu
Hi all
I have a cluster with 5 esx 4.0 u1-208167, which installed on IBM x 3550 M2 ((2 x Intel® Xeon™ processeur E5520) .)
I want to add a server to server cluster .the is IMB x 3550 m3 (2 x Intel® Xeon™ processor E5620 4 c)
do I have to make a chenges on Esx servers / vm / vcenter when I add the new esx for my datacerter and to the cluster so I can do Vmotion / storage migrate this server in the cluater (I have the appropriate license and plug)?
Thanks for the help
is there another way to activate the CEV on my existing cluster and does not create a new?
You can try to create a new cluster and select CVS it and move all your hosts to this cluster
should I turn off my vm all?
You will need to put the hosts in maintenance mode. So what you can do is put the host 1 in maintenance mode, virtual machines will move to host 2. Now move the new active EVC cluster host 1 and continue to do this until all of your hosts are in the cluster. You can try vMotion your VM 2 host to host 1 which is now in the new cluster, but it all depends on what your processor will hide VCA is activated... And if you cannot vMotion, virtual machine in a VCA not to an active evc cluster cluster, then Yes, you will have to turn off and restart your virtual machines in the new cluster
I also have SRM ad site.do I need to activate the CEV on the cluster, I have here (a different Vcenter)
No u don't.
Follow me @ Cloud - Buddy.com
-
Can you have a cluster with a single host?
Hello
I'll put up a new VMware infrastructure, which includes a cluster with 2 guests in a place and a single ESX host in a second location. They will all be managed by server unique vSphere.
It is possible that the second site can earn an additional ESX host at some point in the future. So, my question is if I have to create a cluster for the second site and have just the single host in it for now, so its ready if we add a second host? Is it possible to have a cluster with a host, and what are the consequences of this?
Thank you
Joe
Technically, Yes, you can have a Cluster to a single node and if you plan to add another node in the cluster later it makes sense to set up the first node.
And, both from a technical point of view, but especially from a point of view BAU. Mulitnode cluster promotion will be less intrusuve there is no additional software to add on the pre-existing main node, therefore you Board change will be less nervous about the piece of work, because it won't change the node pre - that does not exist.
From a personal point of view my current client runs a number of single-node clusters, in their environment.
-
Relocation of vCenter VM to a different cluster with separate storage
I think I've painted myself into a corner on this one. We have vCenter operating in a virtual computer on our former VI3.5 cluster that is attached to an older SAN we are decommissioning. We have a cluster of servers managed by the same server vSphere vCenter and it is attached to a new SAN. The pairs of cluster/SAN are physically separated and only connect via vCenter. We have been able to transfer some virtual machines between separate groups by closing them and using the option "change host and data store. However, I don't know how to do this with the vCenter server. I need finish to the new cluster and get its files VM on the new San, but if I stopped it I can't use the option migrate host/datastore together.
Does anyone have ideas how I can accomplish this approach? Am I stuck creating a new server vCenter on the new cluster?
you are far simpler would be to use VMware Converter.
-
Penetrating VM from ESX Cluster stand-alone ESXi Server
I get an error trying to move a virtual machine of cluster VI in a standalone ESXi Server, someone had a bit of luck this? I tried the following: Get-VM-name "CO-WS-TEST1" - location (Get-VMHost "CO-WS-TEST1"). Move-VM - Destination (Get-VMHost "CO-VM-TEST2") where CO-VM-TEST2 is a stand-alone ESXi server and CO-WS-TEST1 is in an ESX Cluster with VI.
I get the following error:
Get-VMHost: 2009-04-13 13:08:08 Get - VMHost VMHost with the "CO-VM-TEST2" name not found, using the specified filters.
On line: 1 char: 60
+ Get-VM-name of the CO-WS-TEST1 | Move-VM-Destination (Get-VMHost & lt; & lt; & lt; & lt; "CO-VM-TEST2")
Move-VM: cannot bind parameter 'Destination '. Could not convert "" to "VMware.VimAutomation.Types.VIContainer".
On line: 1 char: 48
+ Get-VM-name of the CO-WS-TEST1 | Move-VM-Destination & lt; & lt; & lt; & lt; (Get-VMHost "CO-VM-TEST2")
Thanks in advance for any help you can give me.
What is ESXi system managed (for example with a non-free full license) by your vCenter? If this isn't the case, then you can not make a gesture like this. You can probably fake it with enough script and help of some external tools to make disk copy.
[vExpert |] [ http://www.vmware.com/communities/vexpert/], PowerShell MVP, moderator of the VI Toolkit forum
Author of the book: VMware Infrastructure Management with PowerShell
Co-host, PowerScripting Podcast (http://powerscripting.net)
Need help in General, other than VMware PowerShell? Try the PowerShellCommunity.org forums
-
Can I create different consistency nodes in the same cluster with defferent?
Can I create consistency different nodes in the same cluster with defferent cache - config.xml file?
A cache can be distributed in these nodes of deffirent?Yes. You can create different consistency nodes in the same cluster with cache files - config.xml defferent as long as you use the same file tangosol - coherence.xml and the same file tangosol-coherence - override.xml. But you can't store the data in the cache in the various nodes (created with different cache-config file). In other words, a node only to create their own Hide modes that are launched with the same cache file - config.Xml.
See the following demo:
I start a cache using the cache config examples-cache file server - server.xml. Then I start a console cache storage-disabled people (client cache) by using the config file coherence-cache cache - config.Xml. Two of them using the same file tangosol - coherence.xml and the same file tangosol-coherence - override.xml.
The cache server uses a cache service PartitionedPofCache. But the client side using the Distributedcache service. The cluster address is same 224.3.5.2.
The name of the cluster is also samme. They know.D:\coherence\lib>D:\examples\java\bin\run-cache-server.cmd
D:\coherence\lib>D:\examples\java\bin\run-cache-server.cmd The system cannot find the file D:\coherence. The system cannot find the file C:\Oracle\Middleware\jdk160_11. 2009-12-22 12:09:31.400/4.987 Oracle Coherence 3.5.2/463
(thread=main, member=n/a): Loaded operational configurat ion from resource "jar:file:/D:/coherence/lib/coherence.jar!/tangosol-coherence.xml" 2009-12-22 12:09:31.450/5.037 Oracle Coherence 3.5.2/463 (thread=main, member=n/a): Loaded operational overrides from resource "jar:file:/D:/coherence/lib/coherence.jar!/tangosol-coherence-override-dev.xml" 2009-12-22 12:09:31.470/5.057 Oracle Coherence 3.5.2/463 (thread=main, member=n/a): Optional configuration override "/tangosol-coherence-override.xml" is not specified 2009-12-22 12:09:31.540/5.127 Oracle Coherence 3.5.2/463 (thread=main, member=n/a): Optional configuration override "/custom-mbeans.xml" is not specified Oracle Coherence Version 3.5.2/463 Grid Edition: Development mode Copyright (c) 2000, 2009, Oracle and/or its affiliates. All rights reserved. 2009-12-22 12:09:33.864/7.451 Oracle Coherence GE 3.5.2/463 (thread=main, member=n/a): Loaded cache configuration from "file:/D:/examples/java/resource/config/examples-cache-config.xml" 2009-12-22 12:09:39.983/13.570 Oracle Coherence GE 3.5.2/463 (thread=Cluster, member=n/a): Service Cluster joined t he cluster with senior service member n/a 2009-12-22 12:09:43.187/16.774 Oracle Coherence GE 3.5.2/463 (thread=Cluster, member=n/a): Created a new cluster "cluster:0xD3FB" with Member(Id=1, Timestamp=2009-12-22 12:09:38.06, Address=192.168.8.80:8088, MachineId=24656, Locatio n=process:144, Role=CoherenceServer, Edition=Grid Edition, Mode=Development, CpuCount=1, SocketCount=1) UID=0xC0A8085000 000125B75D888C60501F98 2009-12-22 12:09:43.508/17.095 Oracle Coherence GE 3.5.2/463 (thread=Invocation:Management, member=1): Service Mana gement joined the cluster with senior service member 1 2009-12-22 12:09:46.582/20.169 Oracle Coherence GE 3.5.2/463 (thread=DistributedCache:PartitionedPofCache, member=1 ): Service PartitionedPofCache joined the cluster with senior service member 1 2009-12-22 12:09:46.672/20.259 Oracle Coherence GE 3.5.2/463 (thread=DistributedCache:PartitionedPofCache, member =1): Loading POF configuration from resource "file:/D:/examples/java/resource/config/examples-pof-config.xml" 2009-12-22 12:09:46.702/20.289 Oracle Coherence GE 3.5.2/463 (thread=DistributedCache:PartitionedPofCache, member =1): Loading POF configuration from resource "jar:file:/D:/coherence/lib/coherence.jar!/coherence-pof-config.xml" 2009-12-22 12:09:47.734/21.321 Oracle Coherence GE 3.5.2/463 (thread=main, member=1): Started DefaultCacheServer. .. SafeCluster: Name=cluster:0xD3FB Group{Address=224.3.5.2, Port=35463, TTL=4} MasterMemberSet ( ThisMember=Member(Id=1, Timestamp=2009-12-22 12:09:38.06, Address=192.168.8.80:8088, MachineId=24656, Location=process :144, Role=CoherenceServer) OldestMember=Member(Id=1, Timestamp=2009-12-22 12:09:38.06, Address=192.168.8.80:8088, MachineId=24656, Location=proce ss:144, Role=CoherenceServer) ActualMemberSet=MemberSet(Size=1, BitSetCount=2 Member(Id=1, Timestamp=2009-12-22 12:09:38.06, Address=192.168.8.80:8088, MachineId=24656, Location=process:144, Rol e=CoherenceServer) ) RecycleMillis=120000 RecycleSet=MemberSet(Size=0, BitSetCount=0 ) ) Services ( TcpRing{TcpSocketAccepter{State=STATE_OPEN, ServerSocket=192.168.8.80:8088}, Connections=[]} ClusterService{Name=Cluster, State=(SERVICE_STARTED, STATE_JOINED), Id=0, Version=3.5, OldestMemberId=1} InvocationService{Name=Management, State=(SERVICE_STARTED), Id=1, Version=3.1, OldestMemberId=1} DistributedCache{Name=PartitionedPofCache, State=(SERVICE_STARTED), LocalStorage=enabled, PartitionCount=257, BackupCo unt=1, AssignedPartitions=257, BackupPartitions=0} ) 2009-12-22 12:12:29.737/183.324 Oracle Coherence GE 3.5.2/463 (thread=Cluster, member=1): Member(Id=2, Timestamp=20 09-12-22 12:12:29.541, Address=192.168.8.80:8089, MachineId=24656, Location=process:1188, Role=CoherenceConsole) joined Cluster with senior member 1 2009-12-22 12:12:30.498/184.085 Oracle Coherence GE 3.5.2/463 (thread=Cluster, member=1): Member 2 joined Service M anagement with senior member 1 2009-12-22 12:12:31.860/185.447 Oracle Coherence GE 3.5.2/463 (thread=Cluster, member=1): TcpRing: connecting to me mber 2 using TcpSocket{State=STATE_OPEN, Socket=Socket[addr=/192.168.8.80,port=8089,localport=2463]} 2009-12-22 12:12:51.338/204.925 Oracle Coherence GE 3.5.2/463 (thread=Cluster, member=1): Member 2 joined Service D istributedCache with senior member 2 The following command starts a cache client.
D:\coherence\bin>coherence.cmdD:\coherence\bin>coherence.cmd ** Starting storage disabled console ** java version "1.6.0_11" Java(TM) SE Runtime Environment (build 1.6.0_11-b03) Java HotSpot(TM) Server VM (build 11.0-b16, mixed mode) 2009-12-22 12:12:21.054/3.425 Oracle Coherence 3.5.2/463
(thread=main, member=n/a): Loaded operational configurat ion from resource "jar:file:/D:/coherence/lib/coherence.jar!/tangosol-coherence.xml" 2009-12-22 12:12:21.355/3.726 Oracle Coherence 3.5.2/463 (thread=main, member=n/a): Loaded operational overrides from resource "jar:file:/D:/coherence/lib/coherence.jar!/tangosol-coherence-override-dev.xml" 2009-12-22 12:12:21.365/3.736 Oracle Coherence 3.5.2/463 (thread=main, member=n/a): Optional configuration override "/tangosol-coherence-override.xml" is not specified 2009-12-22 12:12:21.415/3.786 Oracle Coherence 3.5.2/463 (thread=main, member=n/a): Optional configuration override "/custom-mbeans.xml" is not specified Oracle Coherence Version 3.5.2/463 Grid Edition: Development mode Copyright (c) 2000, 2009, Oracle and/or its affiliates. All rights reserved. 2009-12-22 12:12:29.316/11.687 Oracle Coherence GE 3.5.2/463 (thread=Cluster, member=n/a): Service Cluster joined t he cluster with senior service member n/a 2009-12-22 12:12:29.356/11.727 Oracle Coherence GE 3.5.2/463 (thread=Cluster, member=n/a): Failed to satisfy the variance: allowed=16, actual=20 2009-12-22 12:12:29.356/11.727 Oracle Coherence GE 3.5.2/463 (thread=Cluster, member=n/a): Increasing allowable v ariance to 17 2009-12-22 12:12:29.807/12.178 Oracle Coherence GE 3.5.2/463 (thread=Cluster, member=n/a): This Member(Id=2, Time stamp=2009-12-22 12:12:29.541, Address=192.168.8.80:8089, MachineId=24656, Location=process:1188, Role=CoherenceConsole, Edition=Grid Edition, Mode=Development, CpuCount=1, SocketCount=1) joined cluster "cluster:0xD3FB" with senior Member(I d=1, Timestamp=2009-12-22 12:09:38.06, Address=192.168.8.80:8088, MachineId=24656, Location=process:144, Role=CoherenceS erver, Edition=Grid Edition, Mode=Development, CpuCount=1, SocketCount=1) 2009-12-22 12:12:29.977/12.348 Oracle Coherence GE 3.5.2/463 (thread=Cluster, member=n/a): Member 1 joined Service Management with senior member 1 2009-12-22 12:12:29.977/12.348 Oracle Coherence GE 3.5.2/463 (thread=Cluster, member=n/a): Member 1 joined Service PartitionedPofCache with senior member 1 2009-12-22 12:12:30.578/12.949 Oracle Coherence GE 3.5.2/463 (thread=Invocation:Management, member=2): Service Mana gement joined the cluster with senior service member 1 SafeCluster: Name=cluster:0xD3FB Group{Address=224.3.5.2, Port=35463, TTL=4} MasterMemberSet ( ThisMember=Member(Id=2, Timestamp=2009-12-22 12:12:29.541, Address=192.168.8.80:8089, MachineId=24656, Location=proces s:1188, Role=CoherenceConsole) OldestMember=Member(Id=1, Timestamp=2009-12-22 12:09:38.06, Address=192.168.8.80:8088, MachineId=24656, Location=proce ss:144, Role=CoherenceServer) ActualMemberSet=MemberSet(Size=2, BitSetCount=2 Member(Id=1, Timestamp=2009-12-22 12:09:38.06, Address=192.168.8.80:8088, MachineId=24656, Location=process:144, Rol e=CoherenceServer) Member(Id=2, Timestamp=2009-12-22 12:12:29.541, Address=192.168.8.80:8089, MachineId=24656, Location=process:1188, R ole=CoherenceConsole) ) RecycleMillis=120000 RecycleSet=MemberSet(Size=0, BitSetCount=0 ) ) Services ( TcpRing{TcpSocketAccepter{State=STATE_OPEN, ServerSocket=192.168.8.80:8089}, Connections=[]} ClusterService{Name=Cluster, State=(SERVICE_STARTED, STATE_JOINED), Id=0, Version=3.5, OldestMemberId=1} InvocationService{Name=Management, State=(SERVICE_STARTED), Id=1, Version=3.1, OldestMemberId=1} ) Map (?): 2009-12-22 12:12:49.505/31.906 Oracle Coherence GE 3.5.2/463 (thread=main, member=2): Loaded cache configuration from "jar:file:/D:/coherence/lib/coherence.jar!/coherence-cache-config.xml" 2009-12-22 12:12:51.358/33.729 Oracle Coherence GE 3.5.2/463 (thread=DistributedCache, member=2): Service Distribut edCache joined the cluster with senior service member 2 example-distributed DistributedCache example-binary-backing-map true But when I try to store data cached from the client side, it reports the error message: it is staorage-disabled people. It shows that this console cache cannot store data in the server cache existing since then using different cache config files.
Map (ca3): cache ca2
example-distributed DistributedCache example-binary-backing-map true (thread=main, member=2): java.lang.RuntimeException: Storage is not configured at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.onMissing Storage(DistributedCache.CDB:9) at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.ensureReq uestTarget(DistributedCache.CDB:34) at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.put(Distr ibutedCache.CDB:22) at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.put(Distr ibutedCache.CDB:1) at com.tangosol.util.ConverterCollections$ConverterMap.put(ConverterCollections.java:1541) at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ViewMap.put(Distrib utedCache.CDB:1) at com.tangosol.coherence.component.util.SafeNamedCache.put(SafeNamedCache.CDB:1) at com.tangosol.coherence.component.application.console.Coherence.processCommand(Coherence.CDB:581) at com.tangosol.coherence.component.application.console.Coherence.run(Coherence.CDB:39) at com.tangosol.coherence.component.application.console.Coherence.main(Coherence.CDB:3) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.tangosol.net.CacheFactory.main(CacheFactory.java:1400)
Maybe you are looking for
-
OfficeJet Pro 8710: Duplex Fax
I just faxed 4 recto pages using the ADF, which apparently sent by fax on both sides for a total of 8 pages sent. What happened, and how can I fix?
-
Transfer Ipod Satellite C660 library to external HARD disk
I'm trying to find a way to transfer my ipod on my external hard drive library. I saw on you tube, but when I try on my C660 laptop, it does nothing. Can anyone help.
-
How can I install the latest audio harware drivers?
I was removing programs & messed up. now I have no sound. I tried to restore but it did not work. I tried to do all updates @ mircrosoft, but I still have no audio. anyone where I can go to get & install a driver?
-
Dell studio 17 with Vista Home premium 32. aged 22 months cannot start up.
I complete the sign in process, but after a while, the screen is blank. I started in safe mode, but the same problem occurs. I tried the system restore, but the message it says its already running. The process is cyclicle. I ran the diagnostics, but
-
Since auto-updates 2nd week of February 2010, my PC will not boot.