WLC username/password daily visitor access

Similar Questions

• How to cancel name for username/password when you access the WIn7 computer to stream?

  Hello

  I have a win7 computer and I would like to access it from a stream. I see the computer win 7 banners, but when I try to connect to access shared folders, it requires username & password. I don't know what they are. I have another computer with Vista from where I can access the computer of win 7. I can also access files on the computer of vista of banners.
  I turned on the discovery network, printer and file sharing, turn on sharing so anyone can read & write files in the public folder. Disabled password protection sharing and allowed Windows to manage the homegroup connections (recommended).
  Can any suggestions on how I disable the name of user and password? or at least what is it?
  Thank you
  Leon.
  PS: He used to work properly without a username, but suddenly he began to pose for her (probably after that I restarted the computer or the streamed)

  Hello

  I understand that you want to cancel the name for username/password when you access the WIn7 computer to stream.

  I suggest you to send your query on the forum of streamer and I hope that they will be able to guide you in the right direction.

  Here is the link:

  http://support-splashtop2.Splashtop.com/forums

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• Not allowed instant access to my Windows Mail without username & password! Can't remember either! WHY?

  I can't access my Windows mail. Safety sentre suddenly gives me a pop - up window, who want a username & password for connection home.  I do know this... never needed before.  Help!  What should I do now?

  I think I might need expert advice.  Nothing of what I'm trying to help me in this :(((

  If you have forgotten your username and password, call your ISP (internet service provider).
  Your ISP is the one who gave you the user name and password. They have the record. Ask them.

  At the same time ask if there is a technician who can help you with the problem of popup box.

  PS You should post this question in the forum for networking and online:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-Networking?tab=unanswered

• I can access pc window xp 7 but can't access window 7 pc of Windows xp who asked for username & password. I already had the off-ramp of password protected sharing

  1 PC having xp

  PC 2 having win.7
  2 PC can access everything shared on pc 1
  but pc 1 can't access anything whatsoever to pc 2
  It was asking username and password
  password protected sharing is already disable
  If I have a username & password for the pc 2 it would not
  These systems are mutually ping correctly.
  the Working Group is the same
  what I have to do

  Hi Anil,

  I suggest you try all the steps from the following link to make sure that all parameters are set accordingly.

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-in/Windows7/networking-home-computers-running-different-versions-of-Windows

  Post us the results once you try the steps above.

• Created a site in dreamweaver, want to now set up the MySql database and username / password to access

  I created a site in dreamweaver, now you want to set up the MySql database and username / password to access a part of it. Dreamweaver's tools?

  I guess I need to learn PHP?

  Guidance gratefully received!

  Bob

  If you simply need to restrict access to your site, or a part of your site, there is an easier way to do it, using Apache htpasswd, but this solution is very limited and not suitable for use with clients, there is no interesting features people expect, as the ability to reset a lost password.

  Otherwise, Yes, you will need to learn some PHP and SQL.

  You will start by setting up your development computer with an Apache web server, which comes with PHP and possibly also MySQL. There are free versions, such as XAMPP, but I prefer Zend Server, which costs $195.

  Dreamweaver includes data 'tools' to the CS 5.5 version and there are third-party plugins available that will handle the data functions, but to really make things right you need to learn how to write your own code and don't mess with the tools who write code for you that you can not understand and are difficult to change.

  I think that David Powers PHP Solutions book is a good introduction and also includes a tutorial on building a password access system that is fine.

• Get the "failed connection: incompatibility of username/password when you use IE accessing the page of Configurator vco.

  When configuring a device to vCO 5.5.2 I can't login the configuration page https://:8283/ using IE as your browser. I constantly get the message: ' failed connection: incompatibility of the username/password or account temporarily blocked after too many failed attempts. But not changed the error even after that I changed the password. Suresh -

  Use a different browser (Firefox or Chrome) and it will work ;-)

  Kind regards

  Marc

• Wireless router requesting domain username, password and logon

  I recently bought a router without wire - WBR - T2 - as my old netgear router has stopped working. I can connect via the ethernet fine connection and access the internet. But on my computer Vista laptop when I try to connect to the wireless network, what I asks me to enter a username, password and domain logon. The old netgear router has not asked for these. Any help if her I need information would be appreciated.

  Thank you
  Jon

  I don't know where you get the application for the user name, etc. Your computer is on a domain? In the meantime, here is general information about the implementation of a wireless network. See if anything here helps you.

  To configure the router:

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine. The first thing to do is to change the default password because * all * known default passwords for different routers.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar. ;-)

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). Most computers purchased during the last 4 years have the wireless hardware that will support WPA2-Personal (also known as WPA2-PSK). This is the desired encryption level. If your wireless hardware is older, use WPA. Don't use WEP, because who is easily broken within minutes. So go ahead and set the Security Mode WPA2-Personal. Do this and enter a password. For example, you could use the password ' here be dragons, beware you scurvy dogs! The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the ethernet cable and wireless of the computer should see your new network. Enter the password that you have created (exactly as you wrote it with all capital letters and punctuation) to join the network and start surfing.
  MS - MVP - Elephant Boy computers - don't panic!

• zero or change username & password for a connection to another computer on the local network?

  When you open the network, and see you computers and or network for the Working Group action, well, I entered accidentally the wrong username / password for the computer, and I can't seem to change the username-password and or reset it.

  On the local network, I have a linux machine using samba, all permissions are correct, since the box vista * can * connect just fine and have access to everything which, however, on the vista box, I checked still remember the name of user and password, and now I can't change it on another account, I need to take it.

  I have searched for hours and I can't seem to find the answer.

  I tried to disable the account on the linux side and this does not, however, so, he says: "access denied", with no way to enter a new username / password!

  Anyone has an idea on how to solve this problem?

  Finally found the answer.

  In the cmd prompt, (Administrator rights), making control userpasswords2, and then tap the Advanced tab and finally, the button manage passwords.

• Message to username/password invalid when you try to connect to the computer on a homegroup.

  Original title: Second computer cannot find the domain of the first computer in a homegroup

  I have a 2 computer homegroup.  Each computer is says that it is a member of the homegroup.  No matter what computer created the homegroup has no difficulty to access each other, but who later joined can not reach the first.  There is always a message to username/password invalid.  In addition, in the left panel, the computer that joined is not listed under "homegroup" but the computer that created the homegroup sees the one that was added.  This works the same regardless of the order in which everything happens.  I used to think some userid is messed up, but since it works when I reverse the process of creation/join I suspect it's something different.

  Found.  It still does not make any sense, but...
  Remember that this is always the computer that created the homegroup that is the problem.  When you go through Control Panel / homegroup computers are said to belong to a homegroup.  When you go to networking and click to view the entire map, there is this message that says that you have been invited to join a homegroup.  Don't forget, it's the computer that created the home group.  In any case, logical, if you agree to join the homegroup, you have created - and the "homegroup" says you are already a member-all right.  Works fine now.  Go figure.

• username/password in sqlplus

  I installed DB 11 GR 2 under Windows2003 SP2. No problem, everything works.
  I went to the command line and type the following:
  sqlplus/nolog
  connect ererer/rererer@orcl as sysdba
  connected
  Select file_id in dba_data_files;
  FILE_ID
  -----------
  4
  3
  2
  1
  quit smoking
  The question that I don't understand, is how he make the username/password combo was not released!
  BTW, I can use any username/password combo and he accepts it.
  Is this normal, or I did something wrong at the time of installation?

  Yes and it is described in the link above. Look at Figure 1-2.

  You must also imagine it like this: the database is running on the server.

  (1) everyone is allowed access to the server

  (2) only some accounts are permitted to handle the server.
  For example, root can kill all oracle processes or may simply shut down the server.
  If you have the password for the root account on linux, or windows administrator then you can damage the database anyway.
  The database security is as good as the security of your server is.

  (3) If you lose the password for the sys account, then there is a way to reset/restore it.

  (4) you can add more security using files of password or more detailed OS authentication methods. However, if I remember correctly then the standard installation gives rights full sysdba user oracle and maybe the user who started the process of payment.

  BTW: this isn't the best place to ask such questions. The database - general forum is better suited.

• Satellite C870-196 - how to set the password of BIOS access only?

  Hello

  I would like to put a password only to access or modify the BIOS and not to launch the system on my TOSHIBA Satellite C870-196.

  But I do not understand that is configured in the BIOS:

  -Set Admin password
  or
  -Set user password

  Thank you

  Kind regards

  Hello

  Here are some tips as the basis for a better understanding
  http://APS2.toshiba-tro.de/KB0/FAQ2503B00000R01.htm
  http://APS2.toshiba-tro.de/KB0/FAQ9202JE0000R01.htm
  http://APS2.toshiba-tro.de/KB0/FAQ9202JF0000R01.htm

  Check it please and if you have any other questions do not hesitate.

• Bad username / password on Ready Nas Duo v2

  Since I was an adult upward, I'm not supposed to barge on this forum and just shouting that this product is crap. I really can't say that before I managed to actually connect on it, can I?

  Have to admit that really angered me.

  Have implemented what feels like 100 NAS-drives to work, and this is my second home.

  So, I install the drive inside and hang the net. Use the raidar and concludes the NAS drive to try first.

  According to the manual, the username / password should be admin / netgear1.

  According to my loginattempts on Firefox and IE, which is not correct.

  It is a common mistake?

  How do I correct? What I really want to start my career of ReadyNas by resetting the tincan until I was able to connect in it?

  The password on DUO v2 is the password, it is not netgear1.

• I migrate the Server 2003 r2 for 2003 r2 active directory using admt tool.when migrate password it show access denied error.please help to this.

  migrate users AD Server 2003 R2 to version.i even created the broad area of forest trust between this 2 domains.when password it show access denied.i attempted to create the universal group in my old domain but I can't migrate able to add a new domain admin user to the universal group.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• visitor's ability to log in. - need to set up a visitor access to a Wi - Fi hotspot

  How can I configure visitor access to the Wi - Fi hotspot at home is not using my... secured network need to put in place the second network...  I have linksys

  If I understand you correctly, you have a configuration of wireless network in your home and you want a second, network isn't secure wireless for customers.

  Start reading the instructions here--> http://ezlan.net/shield.html
  Instead of follow the directions to disable the part of the second router wireless, what you want to do is to configure two routers so that their wireless signals is separated as far as possible (see the second paragraph after the heading 'Note' on the linked page).

  Ideally, routers should also be physically separated as much as possible.  Set a router to use channel 1 and the other router to use channel 11.  You may still experience some problems of interference between your two routers or between one of them and router is a close neighbor set to the same channel.

• Windows 7 asked to "enter network password" when you access the window XP Machine

  Hi all

  I have one two PC with Windows XP Pro & the other with Windows 7 Pro. I've implemented a network & it seems to work but when I try to access my XP Machine from Windows 7 to ask me to enter the network password. I tried to enter my password to login & that did not work, I tried to disable the password for the xp machine and he asks again. What can I do to solve this problem. My xp machine I can access the pc windows 7 very well so I do not understand why this network password W7.

  Did some research on the net and here's what I did to solve the problem that has been produced

  Allowing access to the network without password

  To allow users to log on to their computer without password and then access the XP Professional machine without a password, you must make a change security policy:

  1. Go to Control Panel | Performance and Maintenance | Administrative Tools | Local security policy.
  2. Expand local policies | Security options.
  3. Double-click on accounts: limit local account passwords using empty for the connection to the console only, which is enabled by default. Disable this option and click OK.

  It stopped at the dialog box access network appearing when trying to access my windows xp machine 7!