WLP deploy question
Question of WLP deployment... I am trying to deploy a portal application and get the below error. Any ideas? (This application deploys much of my domain name single server managed)...weblogic.application.ModuleException: duplicate beans of the same type deployed to two URI: META-INF/communities - config.xml and FCPWorkshop/META-INF/communities-config.xml
(If there is a WLP forum which would be better suited for this question please advise, I couldn't find a)
Thank you
Hi The_Assface,
You can post your query in WebLogic Portal specific Forum: http://forums.oracle.com/forums/forum.jspa?forumID=573
Tags: Fusion Middleware
Similar Questions
-
Basic of the NAC deployment question
Hello
Do I have reason to assume that at least 2 devices - a server and Manager must consist of a NAC deployment? or is the manager, an application running on a Windows Server? the Manager can run on the same machine as the server?
My second question concerns Cisco Trust Agent and clean access Agent. CTA has actually managed by CAA? from what I see, CTA was part of the old framework of the NAC until they start using devices.
Many thanks in advance,
DOM
Manager and the server can run on both PC or Cisco devices, which are in fact HP ProLiant DL140 G3 or HP ProLiant DL360 G5 PCs ;) You will need two devices in all cases.
Second question - no one knows what will happen with all technology in the future. Is it completely replaced by MS NAP? The framework of the NAC is cancelled? Two Cisco solutions are not perfect. What customers actually need, is to have all the features of the NAC appliance to operate directly on the routers and Cisco switches. No clean access server no need in this case, only managing! And the OOB mode which is difficult to set up, support and troubleshoot will disappeared. The NAC framework is executed directly on Cisco devices, but it's not feature-REACH as NAC Appliance.
-
AIA deployment Questions and answers
Question It is recommended to have a Deployment Plan unique for all composites or one each for applicant, ABC, ABC supplier, EBS etc.?
Response There is no specific recommendations. If you have implemented your service properly and idependently (see http://blogs.oracle.com/aia/2010/11/aia_11g_best_practices_for_dec.html), you can deploy in an order any and it does not really matter if you have one or more DPs that everything is deployed.
Question Looking at the DP that is generated, looks like they can be created manually, without going through the AIA LCW, generation of Nomenclature etc. I know it is not the approach suggested depending on the flow of AIA, but is there something wrong with that?
Response There is nothing really wrong with artisanal DP except that you lose the overall flow of information from the beginning to end of your development cycle. But in fact, some clients decided to do this way, however.
Question What is the importance of the /oracle/product/Middleware/AIA/aia_instances/my_instance/AIAMetaData/config/AIAConfigurationProperties.xml file? When an interface is migrated from Dev to Test, how to make sure that this file is updated in the Test instance? It's updating manually by running UpdateMetaData.xml? or HELP take care of him?
Response This file is absolutely essential to running under services read certain properties (for example, the real services that are called endpoint) of this file. I guess that your services will fail if you do not have a valid file on your test environment, i.e. a section for each of your services.
And Yes, the AID takes care to maintain. Each service that you created with the constructor for Service must have a file called AIAServiceConfigurationProperies.xml. When executing of AID to deploy such a service, it adjusts first values in this file correspond to the current environment, then merges the content in AIAConfigurationProperties.xml and finally download on MDS.OK, the forceMerge on the Composite statement introduced 11.1.1.4. In earlier versions, you will need to use the DforceMergeAIAConfigProperties = true when the appellant ant option to achieve the same thing, but which would be a global setting for the session whole ant. I have not tested this option, but perhaps worth a try.
And no, you don't have to replace the tokens manually, HELP will take care of that when it merges the AIAServiceConfigurationProperties.xml.
Your customization to support partitions looks good at a glance.
Please let us know if this and the above works for you.
Gerhard
-
Classic deployment question 10.3.2 blackBerry
I have a unlocked Blackberry Classic SQC100-4. I used it on AT & T GoPhone. Why the 10.3.2 is not available for my unlocked phone?
You seem to think that all is lost? Official methods receive an update in no case are the only methods. Also, we cannot know that if your hypothesis is correct about ATTs controls on the implementation... only they can answer that question, of course. Finally, I feel obliged to provide a slight correction here:
Val_Dallas wrote:
BlackBerry does not support devices purchased from other online retailers.
This raises different questions. I did the (incorrect) assumption earlier that you had purchased your device from ATT. One of the theories on the OS version control is that the carrier controls... but it's actually a bit generic. Each instrument is initially made for some channels and the carrier... If your device was not originally made for ATT but rather another carrier, then it is possible that it was this another carrier (whatever they may be, we have no way of knowing) who controls the release, even if you run on ATT.
But, it's all theoretical and academic in any case... If the official methods do not provide the update, there is no way to force them to do so. But it remains informal methods... refer:
And, since it is still updated to 10.3.2.2639, you can get this automatic charger here:
So you see, all is not lost! As has always been with BB, skillful users have come up with methods to get around the controls that exist and allow other users get what they want.
Good luck!
-
I wanted to deploy an application on-line via BES (4.1), then I put the cod and alx files on a drive shared, has run the indexer, created the software configuration and it has assigned to the user. Everything went well, except that he has not pushed to the device again - it was over 5 hours since the app has been on the server! So, what could go wrong? How to fix the failures of deployment? Is there a log somewhere I can look at? The app installs fine using javaloader. And cod files are under 60K each.
I'd appreciate any help!
Thank you, Peter! Unfortunately, I found that the record had been disabled on the server recently - there is nothing to watch!
However, that's what I did:
1 added "AppProvisioningPollInterval" in the Windows registry and set it to 10 minutes (for testing. I've put 240 after that I did test).
2 restarted BlackBerry Service strategy (from Windows 'Services').
As soon as I did the two things above, I could see some activity! However, the State of the device under software configuration turned to "unsupported device". Then, I downloaded the last Device.xml.
Problem solved!
Thank you.
-
Helllo,
I'm trying to deploy a form on the application server. What I need to compile a fresh .fmx on the application server or can I just copy the fmx of the Windows PC to the application server? Please notify.
Concerning
IQ.FMX files are dependend of platform which means that if the target platform is different then your development platform, you need to recompile on your target platform. If the platform is the same, you could take the fmx from a development computer files; It is advisable to recompile them against the database they must run on the applicationserver however.
see you soon
-
I created a flash animation simple for a customer who makes a loop 3 times. At the end of each round, I want to add a button that will stop the action of the main movie and reveal a small pop-up for legal copy when the user hovers over it, then re-boot the film once again they roll-off-however, it will only do so when the user interacts with the button, if they do not touch, the film will continue through 3 loops without hindrance.
Side note: I can't use pause and play buttons, it must be a function simple reversal/deployment.
Can someone help me with the script? Any ideas?
If you know how to code deployments bearings using instance names, then you just need to have the code deployment in the main assembly and use play() and stop() controls...
btnName.onRollOver = function() {}
Stop();
}
btnName.onRollOut = function() {}
Play();
}
-
New to VoIP techology is moving at a different pace in Australia but I will ask anyway.
One of my clients has a simple WiFi link to a remote office 1 km of the main branch, there is no land line in the remote offices.
A SPA3000 may be connected to the public switched network at the main office and use the link to reach a SPA922 for example, or I am far from the truth.
There is no VSP / / it will only use the customer's existing PSTN headquarters at this stage.
Thank you.
Thanks for the tips, this will be a pair of SPA3102 back-to-back with handsets of clients is the easiest.
-
I got the installation of vApp and I have things more work but I have two open items that I have not thought out on mine:
-Where can I make changes to the OU in Active Directory where the workspace looks like for users?
-How to workspace me see a ThinApp share?
I searched the user interface and searched the docs to support but have yet to find my answers. Anyone has any advice for me?
You must use the admin user interface connector for these two tasks.
Please log in to the admin of Connector UI goes to https://
/hc/admin /. Note the trailing slash.
Then, log on with the password for the admin user.
-
BUILD FAILED during installation FusionOrderDemo_R1PS4
I followed this tutorial
Oracle® Fusion Middleware tutorial for the race and the generation of an Application with Oracle SOA Suite 11 g Release 1 (11.1.1) 10275-02
and at this stage 2.1.3 task 3: deploy the Application demo WebLogic Fusion I came across the problem. The previous steps are completed correctly.
I checked this post, but they have not helped me.
https://community.Oracle.com/thread/2281082?start=0
I have the same problem: cannot get the data source connection: java.sql.SQLException: ORA-01017: name of user and password invalid; denied connection
Journal of Ant file is here:
-----------------------
BuildFile: D:\DOWNLOADS\SOA 11gR1\FusionOrderDemo_R1PS4\CompositeServices\bin\build.xml
[echo] Ant: Apache Ant version 1.7.1 compiled Java on June 27, 2008: 1.6
[echo] Using mds-type: db
entry entry jump as server.password property has already been set.
init:
[echo] Version of SOA Suite 11g:
[java]
[java] *****************************************************************************
[java] Oracle SOA Server version 11.1.1.5.0
[java] Build: 0
[java] The generation time: my Apr 18 18:05:14 PDT 2011
[java] Build type: free
[java] Tag from the source: PCBPEL_11.1.1.5.0_GENERIC_110418.1550.0174
[java]
[echo] soa infrastructure mgmt home: D:\Middleware\JDev11gR1PS4\jdeveloper\
setupWorkspaceForJdeveloperUse:
[echo]! Implementation of workspace for JDeveloper, where seedlings adf-config, connections.xml and filling mds
[echo] Ant: Apache Ant version 1.7.1 compiled Java on June 27, 2008: 1.6
[echo] Using mds-type: db
entry entry jump as server.password property has already been set.
init:
[echo] Version of SOA Suite 11g:
[java]
[java] *****************************************************************************
[java] Oracle SOA Server version 11.1.1.5.0
[java] Build: 0
[java] The generation time: my Apr 18 18:05:14 PDT 2011
[java] Build type: free
[java] Tag from the source: PCBPEL_11.1.1.5.0_GENERIC_110418.1550.0174
[java]
[echo] soa infrastructure mgmt home: D:\Middleware\JDev11gR1PS4\jdeveloper\
createMDSConnections:
[echo] Ant: Apache Ant version 1.7.1 compiled Java on June 27, 2008: 1.6
[echo] Using mds-type: db
entry entry jump as server.password property has already been set.
createMDSConnectionForDB:
[echo] Creation... /. ADF/META-INF/ADF-config.xml for the MDS supported database
entry entry jump as mds.db.password property has already been set.
[copy] Copying 1 file to D:\DOWNLOADS\SOA 11gR1\FusionOrderDemo_R1PS4\CompositeServices\.adf\META-INF
[echo] With the help of jdbc:oracle:thin:@192.168.1.100:1521:xe for storage based on db, with the user cutschig_mds
[echo] Ant: Apache Ant version 1.7.1 compiled Java on June 27, 2008: 1.6
[echo] Using mds-type: db
entry entry jump as server.password property has already been set.
createMDSConnectionForFileStore:
[echo] Ant: Apache Ant version 1.7.1 compiled Java on June 27, 2008: 1.6
[echo] Using mds-type: db
entry entry jump as server.password property has already been set.
createMDSConnectionForServerFileStore:
importCommonServiceArtifactsIntoMds:
[java] Starting import from file system local to the mds...
[java] oracle.mds.config.MDSConfigurationException: MDS-01330: cannot load the MDS configuration document
[java] MDS-01329: cannot load the item "persistence-config".
[java] MDS-01370: Configuration of MetadataStore for metadata-store-use 'mstore-usage_1"is not valid.
[java] MDS-01259: the metadata store 'oracle.mds.persistence.stores.db.DBMetadataStore' cannot be instantiated.
[java] MDS-00003: error connecting to the database
[java] Exception occurred while getting connection: oracle.ucp.UniversalConnectionPoolException: cannot get data source connection: java.sql.SQLException: ORA-01017: name of user and password invalid. connection refused
[java]
[java] Cannot get data source connection: java.sql.SQLException: ORA-01017: name of user and password invalid. connection refused
[java]
[java] Cannot get data source connection: java.sql.SQLException: ORA-01017: name of user and password invalid. connection refused
[java]
[java]
[java] at oracle.mds.config.PConfig.loadFromBean(PConfig.java:690)
[java] at oracle.mds.config.PConfig. < init > (PConfig.java:499)
[java] at oracle.mds.config.MDSConfig.loadFromBean(MDSConfig.java:707)
[java] at oracle.mds.config.MDSConfig.loadFromElement(MDSConfig.java:764)
[java] at oracle.mds.config.MDSConfig. < init > (MDSConfig.java:515)
[java] at oracle.mds.config.MDSConfig. < init > (MDSConfig.java:443)
[java] at com.otn.sample.fod.soa.util.MdsImportTask.getTargetMdsInstanceByAdfConfig(MdsImportTask.java:133)
[java] at com.otn.sample.fod.soa.util.MdsImportTask.execute(MdsImportTask.java:155)
[java] at com.otn.sample.fod.soa.util.MdsImportTask.main(MdsImportTask.java:84)
[java] Caused by: oracle.mds.exception.MDSExceptionList: SDM-01329: cannot load the item "persistence-config".
[java] MDS-01370: Configuration of MetadataStore for metadata-store-use 'mstore-usage_1"is not valid.
[java] MDS-01259: the metadata store 'oracle.mds.persistence.stores.db.DBMetadataStore' cannot be instantiated.
[java] MDS-00003: error connecting to the database
[java] Exception occurred while getting connection: oracle.ucp.UniversalConnectionPoolException: cannot get data source connection: java.sql.SQLException: ORA-01017: name of user and password invalid. connection refused
[java]
[java] Cannot get data source connection: java.sql.SQLException: ORA-01017: name of user and password invalid. connection refused
[java]
[java] Cannot get data source connection: java.sql.SQLException: ORA-01017: name of user and password invalid. connection refused
[java]
[java]
[java] at oracle.mds.config.PConfig.loadFromBean(PConfig.java:684)
[java]... 8 more
[java] Exception in thread "main" SDM-01330: cannot load the MDS configuration document
[java] MDS-01329: cannot load the item "persistence-config".
[java] MDS-01370: Configuration of MetadataStore for metadata-store-use 'mstore-usage_1"is not valid.
[java] MDS-01259: the metadata store 'oracle.mds.persistence.stores.db.DBMetadataStore' cannot be instantiated.
[java] MDS-00003: error connecting to the database
[java] Exception occurred while getting connection: oracle.ucp.UniversalConnectionPoolException: cannot get data source connection: java.sql.SQLException: ORA-01017: name of user and password invalid. connection refused
[java]
[java] Cannot get data source connection: java.sql.SQLException: ORA-01017: name of user and password invalid. connection refused
[java]
[java] Cannot get data source connection: java.sql.SQLException: ORA-01017: name of user and password invalid. connection refused
[java]
[java]
[java] at com.otn.sample.fod.soa.util.MdsImportTask.execute(MdsImportTask.java:225)
[java] at com.otn.sample.fod.soa.util.MdsImportTask.main(MdsImportTask.java:84)
BUILD FAILED
D:\DOWNLOADS\SOA 11gR1\FusionOrderDemo_R1PS4\CompositeServices\bin\build.xml:276: the following error occurred during the execution of this line:
D:\DOWNLOADS\SOA 11gR1\FusionOrderDemo_R1PS4\CompositeServices\bin\common-sca-tools.xml:414: Java returned: 1
Total time: 2 seconds
-----------------------
I checked the database and the user is dev_soainfra. Should not be cutschig_mds with password soainfra user here?
Anyway, here's my build.properties file
-----------
####################################################################
# Property overall build set for SOA fusion order demo #.
# > author: clemens utschig (oracle Corp.) 2009 #.
####################################################################
# path of libraries and script imports
# oracle.home=C:\\JDeveloper\\11.1.1.3\\jdeveloper\\
Oracle.Home=D:/middleware/JDev11gR1PS4/JDeveloper
# PROPERTIES OF THE SEED INTERNALLY - START #.
# #
# !!!!! DO NOT CHANGE! #
# #
####################################################################
Internal version number #.
FOD.version = 2.3_ps3
common libs of # home
Oracle.Common.Home=${Oracle.Home}/... /oracle_common
# Sub directory of the deployment artifacts
deploy. Sub.dir = deploy
# Sub Directory deployment / build scripts
bin. Sub.dir = Bin
# jee homes application
creditauthorization. Home =... / CreditCardAuthorization
orderapproval. Home =... / OrderApprovalHumanTask
External.partnersupplier.Home =... / ExternalLegacyPartnerSupplierEjb
composite homes #.
orderbookingsdo.composite.Home=../OrderSDOComposite
partnersupplier.composite.Home=../PartnerSupplierComposite
orderbooking.composite.Home=../OrderBookingComposite
B2B.composite.home=../B2BX12OrderGateway
# adf service implementation context url
storefrontservice.contextUri.adf=StoreFrontServiceHooks/StoreFrontService
# sca composite according to context url
storefrontservice.contextUri.soa=soa-infra/services/${soa.partition.name}/OrderSDOComposite!1.0/StoreFrontService
# uri for the ExternalPartnerSupplierEJB ejb
partnersupplier. EJB. URI = WebLogicFusionOrderDemo-ExternalLegacyPartnerSupplierEjb-SessionEJB #com.otn.sample.fod.soa.externalps.IExternalPartnerSupplierService
# ejb application via Spring C uri & I ExternalPartnerSupplierEJB JSca
partnersupplier. JSCA. EJB. URI = WebLogicFusionOrderDemo-ExternalLegacyPartnerSupplierJScaEjb
# global connection to deploy settings, rmi and other
# admin server t3: / / url - deployment
WLS. URL = T3: / / ${admin. Server.Host}: ${admin. Server.port}
# mgd Server t3: / / url - EJB
WLS. MGD. Server.URL=T3://${Managed.Server.Host}:${Managed.Server.rmi.port}
# ctx jndi factory
Java.naming.Factory.initial = WebLogic.JNDI.WLInitialContextFactory
# THE INTERNAL - END SEED PROPERTIES #.
partition # where composites are needed to
SOA.partition.Name = soaFusionOrderDemo
# set to false if you want to use the adf supported services.
SOA. Only.Deployment = false
# deploy the b2b x 12 order composite transformation
Enable.B2B.composite = true
# use a normal ejb3 for the provider external partner (comment or set to false).
# or use the new SCA Weblogic for Java EJB binding (uncomment and set to true)
use. JSCA. EJB.impl = true
Directory of the # file adapter - change your operating system (use-for windows and / for unix)
orderbooking.file.adapter.dir=/tmp
Directory control adapter # file - change your operating system (use-for windows and unix)
orderbooking.file.adapter.Control.dir=/tmp/Control
# jndi name of the jms for composite orderbooking topic
orderbooking. JMS.topic.JNDI=JMS/DemoSupplierTopicUdd
# Connection information for the deployment server
# connection information in server admin - to start topics
Admin. Server.Host = localhost
Admin. Server.port = 7001
# the area where soa infrastructure is installed
Server.domain.Name = soainfra
login # managed server, used for soa deployment, http
Managed.Server.Host = localhost
Managed.Server.port = 8001
test port # for rmi, ejb invocation and other
Managed.Server.rmi.port = 8001
credentials for servers
Server.User = WebLogic
Server.Password = Welcome1
target server # wls (for the value server_soa, EIM use AdminServer shiphome)
Server.targets = soa_server1
# soa-server side oracle directory - necessary for the deployment plans
# and the deployment of sca weblogic (on the ExternalPartnerSupplier project library
SOA. Server.Oracle.Home=/Scratch/cutschig/fmwhome/AS11gR1SOA
# business test event - it's the business event queue
user name of the diagram main db soa #.
SOA.db.UserName = cutschig_soainfra
# soa db password
SOA.db.Password = soainfra
# soa db = connection string > host: port: sid
SOA.db.ConnectString = localhost:1521:XE
# MetaDataServices repository (used for SOA artifacts) shared settings #.
# use 'jdev' for jdeveloper local install, "db" for the database
# In case of 'db' change below (jdbc) parameters for the mds db
Foreign.MDS.type = DB
# Note: Before you deploy are of course you change these settings to your REMOTE
# db - what is strips soa-infra, set the mds.type above for 'db' and run
# the target of "importCommonServiceArtifactsIntoMds". This will import the common
# shared artifacts of $OH/bin/soa-seeds / in the mds (RT) distance.
# A shiphome install that this user is normally named sh_mds
MDS.db.UserID = cutschig_mds
MDS.db.Password = soainfra
database connection string #: driver@host:port:sid
MDS.db.JDBC-URL=jdbc:Oracle:Thin:@localhost:1521:XE
#mds.db.jdbc-url=jdbc:oracle:thin:@192.168.1.100:1521:xe
--------------
I put this password: nenad12345 everywhere while setting SOA according to previous tutorial Quick Start Guide for Oracle® SOA Suite 11 g 1 material (11.1.1.5.0) Version 1.3
Until that moment, I have not had any problems with him.
credentials for servers
Server.User = WebLogic
Server.Password = nena12345
This reclassification:
target server # wls (for the value server_soa, EIM use AdminServer shiphome)
Server.targets = soa_server1
Should I leave this soa_server1 way or should I name as
Server.targets = SOAOSBPS4DevDomain
in the previous tutorial, it's how I named domain/server?
I found what the problem was:
First of all, I used build.xml right click, Run Ant target, validateFodConfigSettings
On a few iterations on it, I found that were mistakes, and finally the output is as follows:
BuildFile: D:\DOWNLOADS\SOA 11gR1\FusionOrderDemo_R1PS4\CompositeServices\bin\build.xml
[echo] Ant: Apache Ant version 1.7.1 compiled Java on June 27, 2008: 1.6
[echo] Using mds-type: db
entry entry jump as server.password property has already been set.
init:
[echo] Version of SOA Suite 11g:
[java]
[java] *****************************************************************************
[java] Oracle SOA Server version 11.1.1.5.0
[java] Build: 0
[java] The generation time: my Apr 18 18:05:14 PDT 2011
[java] Build type: free
[java] Tag from the source: PCBPEL_11.1.1.5.0_GENERIC_110418.1550.0174
[java]
[echo] soa infrastructure mgmt home: D:\Middleware\JDev11gR1PS4\jdeveloper\
createMDSConnections:
[echo] Ant: Apache Ant version 1.7.1 compiled Java on June 27, 2008: 1.6
[echo] Using mds-type: db
entry entry jump as server.password property has already been set.
createMDSConnectionForDB:
[echo] Creation... /. ADF/META-INF/ADF-config.xml for the MDS supported database
entry entry jump as mds.db.password property has already been set.
[copy] Copying 1 file to D:\DOWNLOADS\SOA 11gR1\FusionOrderDemo_R1PS4\CompositeServices\.adf\META-INF
[echo] With the help of jdbc:oracle:thin:@localhost:1521:xe for storage based on db, with the user dev_mds
[echo] Ant: Apache Ant version 1.7.1 compiled Java on June 27, 2008: 1.6
[echo] Using mds-type: db
entry entry jump as server.password property has already been set.
createMDSConnectionForFileStore:
[echo] Ant: Apache Ant version 1.7.1 compiled Java on June 27, 2008: 1.6
[echo] Using mds-type: db
entry entry jump as server.password property has already been set.
createMDSConnectionForServerFileStore:
validateFodConfigSettings:
[echo] Validation of fod through wlst configuration settings
[copy] Copying 1 file to D:\DOWNLOADS\SOA 11gR1\FusionOrderDemo_R1PS4\CompositeServices\bin
[java]
[java] WebLogic Scripting Tool (WLST) initializing...
[java]
[java] Welcome to WebLogic Server Administration scripts Shell
[java]
[java] Help() type help on the available commands
[java]
[java] Checking DOM settings... - admin server: localhost port: 7001
[java] T3 connection: / / localhost:7001 with username weblogic...
[java] Connected to the Server Admin "AdminServer" which belongs to the domain "SOAOSBPS4DevDomain".
[java]
[java] WARNING: A non-secure protocol was used to connect to the
Server [java]. To ensure the safety of on-the-wire, the SSL port or
[java] Admin port should be used instead.
[java]
[java] Connection to the managed server target: Server/AdminServer
[java] [MBeanServerInvocationHandler] com.bea:Name = AdminServer, Type = Server
[java] Check status of the managed server - must run
[java] Checking of the managed server listening port - build properties: 7001
[java] Sending ping to localhost:7001 - soa-infra app
[java] Answer: 302
[java] Now to the tree of domainRuntime. It is a tree read-only with DomainMBean as the root.
[java] For further assistance, use the help (domainRuntime)
[java]
[java] Domain name: SOAOSBPS4DevDomain
[java] All the tests - ready to install Fusion order demo for SOA Suite 11 g
[Remove] Delete: D:\DOWNLOADS\SOA 11gR1\FusionOrderDemo_R1PS4\CompositeServices\bin\checkFODSettings.py
[java] Mds configuration validation running
[java] Got mds-instance target: mstore-usage_1 D:\DOWNLOADS\SOA 11gR1\FusionOrderDemo_R1PS4\CompositeServices\bin\... \.adf\META-INF\adf-config. XML
[java] Tests of connection for foreign mds succeeded
BUILD SUCCESSFULLY
Total time: 4 seconds
----------------
There is new file build.properties
####################################################################
# Property overall build set for SOA fusion order demo #.
# > Author: clemens utschig (oracle Corp.) 2009 #.
####################################################################
# path of libraries and script imports
# oracle.home=C:\\JDeveloper\\11.1.1.3\\jdeveloper\\
Oracle.Home=D:/middleware/JDev11gR1PS4/JDeveloper
# PROPERTIES OF THE SEED INTERNALLY - START #.
# #
# !!!!! DO NOT CHANGE! #
# #
####################################################################
Internal version number #.
FOD.version = 2.3_ps3
common libs of # home
Oracle.Common.Home=${Oracle.Home}/... /oracle_common
# Sub directory of the deployment artifacts
deploy. Sub.dir = deploy
# Sub Directory deployment / build scripts
bin. Sub.dir = Bin
# jee homes application
creditauthorization. Home =... / CreditCardAuthorization
orderapproval. Home =... / OrderApprovalHumanTask
External.partnersupplier.Home =... / ExternalLegacyPartnerSupplierEjb
composite homes #.
orderbookingsdo.composite.Home=../OrderSDOComposite
partnersupplier.composite.Home=../PartnerSupplierComposite
orderbooking.composite.Home=../OrderBookingComposite
B2B.composite.home=../B2BX12OrderGateway
# adf service implementation context url
storefrontservice.contextUri.adf=StoreFrontServiceHooks/StoreFrontService
# sca composite according to context url
storefrontservice.contextUri.soa=soa-infra/services/${soa.partition.name}/OrderSDOComposite!1.0/StoreFrontService
# uri for the ExternalPartnerSupplierEJB ejb
partnersupplier. EJB. URI = WebLogicFusionOrderDemo-ExternalLegacyPartnerSupplierEjb-SessionEJB #com.otn.sample.fod.soa.externalps.IExternalPartnerSupplierService
# ejb application via Spring uri C & I ExternalPartnerSupplierEJB JSca
partnersupplier. JSCA. EJB. URI = WebLogicFusionOrderDemo-ExternalLegacyPartnerSupplierJScaEjb
# global connection to deploy settings, rmi and other
# admin server t3: / / url - deployment
WLS. URL = T3: / / ${admin. Server.Host}: ${admin. Server.port}
# mgd Server t3: / / url - EJB
WLS. MGD. Server.URL=T3://${Managed.Server.Host}:${Managed.Server.rmi.port}
# ctx jndi factory
Java.naming.Factory.initial = WebLogic.JNDI.WLInitialContextFactory
# THE INTERNAL - END SEED PROPERTIES #.
partition # where composites are needed to
SOA.partition.Name = soaFusionOrderDemo
# set to false if you want to use the adf supported services.
SOA. Only.Deployment = false
# deploy the b2b x 12 order composite transformation
Enable.B2B.composite = true
# use a normal ejb3 for the provider external partner (comment or set to false).
# or use the new SCA Weblogic for Java EJB binding (uncomment and set to true)
use. JSCA. EJB.impl = true
Directory of the # file adapter - change your operating system (use-for windows and / for unix)
orderbooking.file.adapter.dir=/tmp
Directory control adapter # file - change your operating system (use-for windows and unix)
orderbooking.file.adapter.Control.dir=/tmp/Control
# jndi name of the jms for composite orderbooking topic
orderbooking. JMS.topic.JNDI=JMS/DemoSupplierTopicUdd
# Connection information for the deployment server
# connection information in server admin - to start topics
Admin. Server.Host = localhost
Admin. Server.port = 7001
# the area where soa infrastructure is installed
# server.domain.name = soainfra
Server.domain.Name = SOAOSBPS4DevDomain
login # managed server, used for soa deployment, http
Managed.Server.Host = localhost
Managed.Server.port = 8001
test port # for rmi, ejb invocation and other
Managed.Server.rmi.port = 8001
credentials for servers
Server.User = WebLogic
Server.Password = Welcome1
target server # wls (for the value server_soa, EIM use AdminServer shiphome)
# server.targets = soa_server1
Server.targets = adminserver
# soa-server side oracle directory - necessary for the deployment plans
# and the deployment of sca weblogic (on the ExternalPartnerSupplier project library
SOA. Server.Oracle.Home=/Scratch/cutschig/fmwhome/AS11gR1SOA
# business test event - it's the business event queue
user name of the diagram main db soa #.
# soa.db.username = cutschig_soainfra
SOA.db.UserName = dev_soainfra
# soa db password
# soa.db.password = soainfra
SOA.db.Password = Welcome1
chain-online host: port: sid # soa db connection
SOA.db.ConnectString = localhost:1521:XE
# MetaDataServices repository (used for SOA artifacts) shared settings #.
# use 'jdev' for jdeveloper local install, "db" for the database
# In case of 'db' change below (jdbc) parameters for the mds db
Foreign.MDS.type = DB
# Note: Before you deploy are of course you change these settings to your REMOTE
# db - what is strips soa-infra, set the mds.type above for 'db' and run
# the target of "importCommonServiceArtifactsIntoMds". This will import the common
# shared artifacts of $OH/bin/soa-seeds / in the mds (RT) distance.
# A shiphome install that this user is normally named sh_mds
#mds.db.userid = cutschig_mds
MDS.db.UserID = dev_mds
#mds.db.password = soainfra
MDS.db.Password = Welcome1
database connection string #: driver@host:port:sid
MDS.db.JDBC-URL=jdbc:Oracle:Thin:@localhost:1521:XE
#mds.db.jdbc-url=jdbc:oracle:thin:@192.168.1.100:1521:xe
---------
If the problems are here:
# the area where soa infrastructure is installed
# server.domain.name = soainfra
Server.domain.Name = SOAOSBPS4DevDomain
next problem:
target server # wls (for the value server_soa, EIM use AdminServer shiphome)
# server.targets = soa_server1
Server.targets = adminserver
next problem:
user name of the diagram main db soa #.
# soa.db.username = cutschig_soainfra
SOA.db.UserName = dev_soainfra
# soa db password
# soa.db.password = soainfra
SOA.db.Password = Welcome1
next problem:
#mds.db.userid = cutschig_mds
MDS.db.UserID = dev_mds
#mds.db.password = soainfra
MDS.db.Password = Welcome1
In the Quick Start Guide for Oracle SOA Suite 11 g 1 material (11.1.1.5.0)® user Version 1.3, servers and domains names are defined differently in this FOD demo application deployment tutorial.
I hope that this response will help anyone that reached other problems of this type when installing this demo application.
This problem is related to this messages:
SOA 11 g demo FOD deploy question -
Deploy the portlet jsr168 by jsr168import.jsp question
Hi, guys
I have a question.
I want to deploy some 168 portlet on weblogic portal, so I followed the document.
perform after import made, show me the message, it means that successful.then I open a browser tab
(http://localhost:7001/rssportlet/producer? wsdl)
put the URL of wsdl, it was to show me the contents of wsdl.
but when I create new producer, in the second step, I do not see the portlet, this means no portlets for me.
(2. producer view Portlets, I do not see my portlet deployed)
What's wrong with my order.
hope you can help me, thank you very much.
concerning
ARISHello again,
I have to mention that as a workaround, you can use the import JSR168 tool because there are to WLP 10.3 and do generate but not to deploy the EAR file for you. On the inside of the EAR, you should find a directory of the same name as your original file of WAR with a WEB - INF / subdirectory. You should be able to copy all the files of configuration generated out of this WEB-INF/lib /. Return to the root of the ear (which has a subdirectory of the same name as your original file of the WAR), expand your original file WAR it so that it replaces the WAR directory, then copy the configuration files that you have stored offshore in the WEB - INF directory. Finally, jar to the top of the EAR file again and it should be ready to deploy.
Kevin
-
Hallo (Shay),
I want to deploy my application Web ADF to GlassFish that is installed on a different server from the development computer.
The application interacts with a MS SQL Server database.
I have some doubts/questions on the tutorial of Shay https://blogs.oracle.com/shay/entry/deploying_oracle_adf_applications_to
So far in the development phase, I deployed the application only to the JDeveloper-itegrated WebLogic Server on the development computer.
Creating a connection pool
- I could successfully creates a pool of connections only by copying the sqljdbc4.jar library in the C:\glassfish4\glassfish\libdirectory. Is this OK or should the library remain in C:\glassfish4\glassfish\domains\domain1\lib?
- Is there a way to hide the password in the additional properties?
- Is there any setting for the property should do (especially for MS SQL Server)? For example, somewhere I read that the isolation of transactions should be set to read uncommitted... but I did not understand why.
- What is the difference between types java.sql.DataSource resources and java.sql.XADataSource?
In JDeveloper application configuration
- Since the beginning of its development, the local configuration of the application Module has the name of data source (JDBC data source) set to java: comp/env/jdbc/MyDatabase_DB_SQLServerDS. If I change this field value to jdbc / < name_of_jdbc_resource_created_in_GlassFish >, as in the tutorial of Shay, it is not longer possible to run the application in JDeveloper (so using the WebLogic JDeveloper-itegrated server). Why? What's wrong?
- JDeveloper offers only the choiche GlassFish 3.1 as a platform for the deployment, but I'll use GlassFish 4. Perhaps this cause problems?
Taking care of the libraries used by the application
- In the project properties, between the libraries and railways class there are a few additional libraries I've used in applications. Here's the JAR files I put in C:\JDeveloper\lib. I copy these libraries on the production server? If Yes, where?
Other questions
- What is the difference between putting a library in the lib of GlassFish folder and put it in the folder lib of Domain1?
- Deployment procedure used by Shay in his tutorial might also be used to deploy the application on a remote production server?
- Is there a way to manually delploy an application, for example by copying manually under GlassFish project folder?
- My final goal is as follows. I have a clean Setup that allows me (1) to continue to run the application in JDeveloper on its built-in WLS, (2) to test the application to the GlassFish that I have installed on the computer development and (3) delploy the application on the remote production server. Could help me do that?
These are a lot of questions.
I thank in advance all the users who want to respond and I hope that the answers to these questions will help also others.
Ciao,.
Federico
Federico - most of your questions is generic Glassfish questions that do not specifically have anything to do with ADF - I recommend that you post on the forum of Glassfish. (Or read the Glassfish documentation for things like the difference between directories and deployment/admin console).
>>
- Since the beginning of its development, the local configuration of the application Module has the name of data source (JDBC data source) parameter tojava:comp / env/jdbc/MyDatabase_DB_SQLServerDS. If I change the value of this field of jdbc /
, as in the tutorial of Shay, it is not longer possible to run the application in JDeveloper (so using the WebLogic JDeveloper-itegrated server). Why? What is the problem?
This is because JDeveloper uses an integrated WebLogic when you run and therefor cannot use the data source of Glassfish.
I suggest that make you this change only when you go to deploy on Glassfish.
>>
- JDeveloper offers only the choiche GlassFish 3.1 as a platform for the deployment, but I'll use GlassFish 4. Perhaps this cause problems?
We don't know, as the matrix of certification for the ADF will show that we have not tested/certified this combination.
Oracle JDeveloper and ADF 12 c (12.1.3) supported systems
>>
- In the project properties, between the libraries and railways class there are a few additional libraries I've used in applications. Here's the JAR files that I put inC:\JDeveloper\lib. I copy these libraries on the production server? If Yes, where?
Use the properties of project-> libraries and class path to add the jar or create a library and add it to your project.
Make sure that this library is deployed by default.
>>
- Deployment procedure used by Shay in his tutorial can also be used to deploy the application on a remote production server
Yes
> Is there any property setting should do (especially for MS SQL Server)?
-
Question about the clickable license in the deployment of a package of *.exe
Hi all
My question concerns how instantiate license clickable when you create a package *.exe?
The JavaFX literature he said that it is possible, and this option is available for installation EXE packages, but they
never give a description of how to use it!
I use Netbeans 7.4 which seems to have most of the options available in the deployment section of the
Dialog box project properties to enable most of the things automatically in my name, but how do I do the foregoing?
Many thanks in advance for your help!
Nevermind, it finally worked still to come at end of this ANT stuff which I'm not too use!
-
View deployment Horizon 6 - Question
Hi guys, I'm deployment view Horizon 6 for laboratory test, I deployed composer and the connection to the server, but I don't know if I need mandatory deploy security view too.
My question is simple, I have install required security?
Thank you and best regards,
Israel Martínez Bermejo
Hello Israel,
It is not mandatory to install a security server, so that the view for work. If you're just doing a lab configuration, it is probably useless. In production, it is a good idea to have security servers, especially if you have users that connect to untrusted networks. If you think you'll ever use for security servers, why not go ahead and create one now for a more complete test?
Hope that helps,
Ian
-
Questions must meet before deploying SRM?
The questions and what steps do I have to have answered before you try to deploy MIS?
For example, I need help team of SAN to SAN replication is done properly? I need help from the network team?
I have a primary site and Dr. I have 8 ESX hosts and vCenter in primary and 4 ESX host server and a vCenter server in DR.
Where should I start?
The SAN of the team must ensure that the replication is configured and working properly - and also make sure that your SAN replication is supported by SRM
The network needs team ensure networking is configured primary approriately and Dr site to ensure the connection can be established in case of failover.
SRM intall and adapters on each site replication-
If you find this or any other answer useful please consider awarding points marking the answer correct or useful
Maybe you are looking for
-
I am trying to find something that will be put in my information automatically, for example name, address, telephone number, etc... I sign up for a lot of gifts and have to put in all my information to get. I wish I had something that could put in my
-
Satellite C660 - key FN and wireless network detection no longer works
Hi people, As a result of a virus, I put my computer to its factory settings. I have however lost the use of the function fn (end?) of the keyboard since and therefore cannot control the lighting of the screen and so on via the F keys any longer. Als
-
Why do I get an error "failure of the Web deployment task"?
Hello microsoft,. I found an error while I'm trying to publish a Web site. ». Web deployment job failed (the 'ASPNET' account doesn't seem to be valid. The account was obtained thanks to its location: 'AspNetWorkerProcessIdentityName'.) On behalf of
-
Try to get 32-bit Vista to see over 2.5 GB of my ram 4 GB - T500
Hi all I read what I can find on the subject and we tried the following suggestions (http://www.ocmodshop.com/ocmodshop.aspx?a=989) to back up towards the top of the amount of physical ram that Vista sees. I tried to pae forceenable, then: Type BCDed
-
SCREEN FLICKERS WHEN I PLUG THE POWER CORD A/C
Can someone help me with this problem. My screen flickers when connected im playing games with my a/c power cord. Howerver when I remove the power cord, it works fine on battery. Also my battery almost won't charge at all with my laptop running, but