WMP to will not Sync & gives Error Message (8 GB internal/32 GB external)

Similar Questions

• I try to run windows update and it will not update gives error code 80070005

  I try to run windows update and it will not update gives error code 80070005, I also ran fix and it tells me that it is fixed but it is not getting the same error code when I try to update after running it help please?

  Hello

   
   
  
  1. which Microsoft Fixit did you?

  2 have you installed new hardware or software before the show?

  3. who is the antivirus installed on the computer program?

  4 update you are trying to install?

  5. are you logged on as administrator on the computer?

  
  If this isn't the case, I suggest you to log on as an administrator and check for the issue.
   
  Method 1:
  One of the other reason for the 80070005 error is caused by software running on your computer security.
  Temporarily disable the security software on the computer and see if that makes a difference.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Method 2:
  I suggest you perform the steps described in the article:
  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update
  http://support.Microsoft.com/kb/968003
  This problem may occur if access is denied when accessing or copying files during the process of Windows Update or Microsoft Update. Access may be denied if you have logged on to the computer as a standard user and this account does not have permission to install updates. I suggest you to follow the steps and check if it helps.
  
  Method 3:
  Perform a clean boot, and then check if it helps.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  
  See also:
   
   
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
   
   
   
  I hope this helps.

• El Capitan will not install. Error message "file system check or repair a failure." Had to reboot with the snow leopard disc.  Any suggestion what happens?

  Trying to upgrade Snow Leopard to El Capitan.  El Capitan will not install.  Get the error message "failed to file system verify or repair.  Quit the installer to restart your computer and try again. "After Setup could not restart without using the Snow Leopard disc (then to download all updates for Snow Leopard).  I tried reinstall and same results.  (in fact made three times)  I'm back to Snow Leopard 10.6.8... Any ideas what is happening.

  Dealing with the corrupt downloaded in OS X

  Dealing with the corrupt downloaded on OS X (2)

  Download Mavericks cannot be verified also applies to Yosemite.

• Update for windows vista platform will not install KB971644 - error message 80041006__

  my computer tried to install the update of platform for windows vista KB971644 since Novermber 5/09 - I get an error message that is not properly configure #80041006.

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Xperia Z2 will not turn on - error message: software update failed

  Hi I would appreciate help! My Xperia Z2 aged for 4 months worked fine until today. It was connected to my Mac, and I was asked to update the bridge of Sony for Mac.. After about 10 minutes he said failed update on the computer. I unplugged the phone, but now the phone turns - all I get is an error message indicating "echec failed software update, make sure that your phone is connected to the computer and try again."

  However, when I connect it, the device is not recognized.

  I can not turn off the phone or, all that happens is a continuous loop of red light, then the error message (it is supported at the moment)

  Can anyone help?

  You should rather bridge of Sony.

• HP Photosmart 7760 printer will not print, the error message in the queue

  I have Mac 10.6.8.   Printer (HP Photosmart 7760) has stopped working.  Reinstalled the drivers updated. Went through the steps including unplugging cables USB and all the other steps recommended by HP. When I press print, the document goes to the queue and and the error message is displayed. When I press the resume to print, nothing happens.

  We will restore the print system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• KB951847 will not, install no error message - windows XP Pro

  Cannot install update .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5
  What should I do?

  Most common:

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  TaurArian [MVP] 2005-2010 - Update Services

• CS5 PC 'App Crash' now program now will not work. Error message below.

  Any help would be great.  I tried to restart the computer.  Also stop for a while and bring back up. I also deleted the cache and tried to delete the files preference.

  It is a turnkey system that made other products still the hardware takes care of everything. In addition, Premiere Pro works well.  The biggest problem now is that I can't program to do anything, but the boot failure screen. Here is the error.

  Signature of the problem:

  Problem event name: APPCRASH

  Name of the application: Adobe Encore.exe

  Application version: 5.0.0.508

  Application timestamp: 4ba2cf79

  Fault Module name: SonicAuthorCore.dll

  Fault Module Version: 5.0.0.508

  Timestamp of Module error: 4ba2cecd

  Exception code: c0000094

  Exception offset: 00bac614

  OS version: 6.1.7600.2.0.0.256.48

  Locale ID: 1033

  Additional information 1: 0a9e

  More information 2: 0a9e372d3b4ad19135b953a78882e789

  Additional information 3: 0a9e

  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  He said that it had already removed the preferences. I saw this first on the cow and said I want to do a repair installation.

  Mr. Million, have you reinstall just yet?

• Media Player Windows Media Player does not work. no error message. nothing at all

  Windows media player will not work. no error messages have nothing at all. its like iff, it does not exsist

  Hello

  1 did you changes to the computer before the show?

  2. what version of Windows you use?

  3. what version of Windows media player you are using?

  4 when was the last time you were able to access the drive Windows media?

   
   
  Provide more information about the issue so that we can better help you.

• WMP 11 will not play my dvd downloads digital message error c00d2906 not support level of mandatory protection to decompress the digital file

  Original title: wmp 11 will not play my dvd digital downloads

  iGet an error message c00d2906 is not supported level of protection required to decompress digital file is there a fix for this problem

  Hi alfredDAVILA,

  ·         What is the format of the file?

  Follow the steps in the article.

  You receive a codec error message or play audio but video does not play when you play media files in Windows Media Player 11

  http://support.Microsoft.com/kb/926373

  For reference:

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions (Applicable to windows XP)

  Windows Media Player 11 cannot read content protected by DRM on Windows Vista

  http://support.Microsoft.com/kb/935336 (Applicable to windows XP)

  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5268&ID=C00D11B1&ContextId=66&OriginalID=C00D2906

• Hotmail delivers now for 3 weeks, before e-mails not get above error message yellow saying microsoft will contact me?

  original title: hotmail issue

  Hello

  Hotmail delivers now for 3 weeks, before e-mails not get above error message yellow saying microsoft will contact me?

  Sometimes I can transfer, but does not include attachments at all.

  Keith

  Hi again Kieth,

  You should ask your question in the forum following instead:

  http://windowslivehelp.com/product.aspx?ProductID=15

  Then Microsoft Mail representatives can check the details of your account etc.

  Also good reading on the issue. Seems to be a recurring problem.

  Kind regards

  Joel

• Lightroom cc 2015 the trial gives error messages when opening

  Hey, I just installed the cc of Lightroom 2015 of the trial, but it does not open. It gives two error messages: 1) an internal error has occurred. (2) an error occurred when attempting to change modules. I went on various forums and support pages. Many of them say to rename the files or something like that, but I can't find these files on my mac. And there are so many suggestions that I don't know that one to listen to.

  Hi danwildmind,

  This problem normally occurs when the files of Adobe to launch Lightroom do not have read/write permissions.

  Please follow this article changing the error modules and grant permissions to required files

  Here's a double thread Lightroom: "an error occurred when attempting to change modules."

  Now that you have gone though the resolution of the problems already

  You must make sure that Adobe files have read/write khakis.

  Follow the steps below to: -.

  • Go to ~/library/Application Support/Adobe = User Library directory [ not to be missed ~ symbol ]
  • Also, go to the folder /library/ Application Support / Adobe = system library
  • When you open GetInfo option for Adobe folder.
  • Make sure you click on '+' symbol, it will open the list of user accounts. Add currently logged in user account and Director of user account, if it is not added.

  Both must have read and write access to prevent these issues in the future.

  Important:

  • Once you added as currently logged on user account and administrator user accounts and provided access for reading and writing.
  • Make sure you click on the gear icon and select apply to closed.
  • Lock dialog box and close the Get Info .
  • So that all files present in the Adobe folder will have read and write access.

  

  Let us know if this helps

  ~ Assani

• Windows Update will not install, I get message 0.800700005.

  Windows Update will not install, I get message 0.800700005.  I'm not available updates when I shut down my computer and cannot access Internet Options in the Tools menu of WE.  Computer works well but no updates or the Option settings. Help

  Hello

  1 update you are trying to install?
  2. don't you make changes on the computer before the show?

  Method 1:
  Run the fix it and check.
  http://support.Microsoft.com/mats/windows_update/

  Method 2:
  Try the procedure described in the supplied knowledge base article and check.
  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update
  http://support.Microsoft.com/kb/968003

  Method 3:
  You can try the steps and check if you are able to install the update.
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798

  Registry warning:
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

• Sony MP3 player will not sync on PC

  SONY MP3 PLAYER

  MY MP3 SONY READER WILL NOT SYNC TO MY COMPUTER

  Hello

  Please do not type in capital letters as it is difficult to read and considered to be shouting.

  ------------------------------------------------------------------------------------------------------

  Here's to an MP3 player and not all apply to an iPod (if an iPod please let us know.)

  Set the MP3 MTP Mode for synchronization of WMP11/12 - mode MSC to treat the MP3 as a reader.

  ----------------------------------------------------------------------------

  If necessary: (Vista references also apply to Windows 7)

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Make sure that Windows is updated appropriately that there have been several USB updates.

  1 check that the driver letters for them, for a player, if the drive of the default drive letter is changed
  in this case. Mine was h: I added a device that took H: and the player stopped. So I put
  Back to H: and the other device to J: and everything worked again. If necessary start - type in the search box->
  Disk management is top - right click it - RUN AS ADMIN

  Don't forget to remember the MP3 must be set to the PSG to sync with WMP, and meteorological service of Canada to copy and
  delete files and update the firmware.

  If no joy follow these steps:

  You may need a powered hub. (all the USB ports on your computer are not powered, often
  only 2)

  Try these:

  Make a Restore Point

  Control Panel - Device Manager - click in the empty area - VIEW - show hidden devices

  Here, your devices are the MP3 player.

  Now look everywhere EXCEPT the USB controllers for your devices (cannot be found) and if you find
  It RIGHT CLICK and UNINSTALL all.

  now go to the USB and UNINSTALL ALL controllers in the category, but the category itself.

  APPLY/OK

  RESET

  This refresh battery USB and hopefully it will allow the unit to install. (You may need a powered hub)

  Here is the similar procedure in XP, Windows 7 is the same, except that we need to clear the specific
  devices if it is present.
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, as
  Although all USB devices that you previously used. Run Options and check the 1st three choices to
  see if one is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  -------------------------------------------------------------------

  If the above does not work (and it should be considered the preparatory work).

  This works for any MP3 player when the USB stack is not corrupted:

  1 player to delete and restart computer - switch to MTP mode on your MP3 player

  Regardless of what brand of MP3 you have

  1. check this Just In Case

  http://KB.SanDisk.com/app/answers/detail/A_ID/42/kW/E200 * / page/2/r_id/101834

  2. does not present (web page as reference)

  http://KB.SanDisk.com/app/answers/detail/A_ID/192/related/1/kW/E200 * / page/2/r_id/101834

  In XP: Start - RUN - CMD

  In Vista/Windows 7: (Do this way!)
  
  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  Copy and paste this command into windows XP or Vista/Windows 7 CMD - press enter

  NET local service localgroup administrators / add

  3. then follow:

  http://KB.SanDisk.com/app/answers/detail/A_ID/139/related/1/kW/E200 * / page/2/r_id/101834

  I hope that your MP3 now works.

  -------------------------------------------------------------------

  Only if necessary:

  Try a system restore before what happened:

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Help with calendar with Outlook sync blackBerry Smartphones to all appointments will not sync...

  I'm not a great tech, but I have some skills good enough for a girl, if I say so myself... but I'm so frustrated... I need help.

  This is my first public post... So I hope that I give all the information but who will help, if I missed something, please let me know.

  Here is some background info:

  I have a BB "BOLD"

  I use it NOT on a company (network)

  I sync my bb with my dell

  Windows Vista (UGH!)

  Outlook - Version 6.0.6001 Service Pack 1 Build 6001

  My calendar and my contacts are the most important reason, I have a bb

  My contacts are FINE

  My schedule is a MESS

  I have 2 separate email addresses work well my bb... For the purposes of his post, I will refer to them as

  [email protected] and

  [email protected]

  When I do appointments in my work calendar, I do one of 2 things to get all my appointments on the BB

  Plan my gmail as a participant in the designation address or

  Prior to the appointment to my gmail from my work email address

  When I make an appointment directly from my BB I do it by selecting Menu > new = my default settings of the account gmail under the 'send '.

  BB News:

  When I'm in the calendar and select > Menu.Options > calendars > I have 3 options

  [email protected] who has (518 entries)

  Default device that has (157 results)

  [email protected] who has (429 entries)

  When I go to the Menu > Options > Advanced Options > Services > (CICAL) by default is [email protected] , it shows that I have options to select my Gmail or my .mac address

  That is the problem - it did not used to happen, and I frankly did not know that my backup was messed up so I don't know how long this is happening.

   

  When I sync with Outlook

  There are only 518 appointments that are synchronized

  I can't get the other 157 (defect of the unit) + 429 (mac) to sync with my outlook

  Can someone help me to get them all on my gmail calendar? or in my outlook so that I can then sync back with the BB

  I will not sync my bb with my mac

  Here's what I tired:

  • Yelling at the computer
  • Yelling in Spanish at the BlackBerry
  • ignoring the two
  • I stopped myself to throw both of them against the wall.
  • 

  But seriously

  I put the BB Desktop Manager to perform a one-way synchronization > bb to outlook = NOTHING only synchronize gmail

  I changed the (CICAL) to my mac address and synchronized = NOTHING - only synchronization gmail

  I am at a loss and would appreciate any help.

  Hello

  We will remember and then on MAC records.

  Outlook contains records of 158 of the associated Gmail Calendar.

  The calendar by default folders must be cleared and restored to the associated Gmail Calendar.

  The Blackberry associated gmail calendar resulting will be then synchronized with Outlook to add the former default records

  resulting calendars synced to Outlook and Blackberry.

  Reading this, I propose more than once. Method 3 is what we do.

  Let me know, tomorrow, what questions you have the procedure so that we can ensure we succeed.

  KB16063 Unexpected results occur when syncing with a BlackBerry smartphone that has several CICAL service records.

  Let me know how it goes!

  Thank you

  Bifocals