WMP11 is very power hungry and causes always a screen freezes.

Similar Questions

• Computer guard stop and causing the blue screen Error Message

  With the help of a Dell Vostro 200 with Windows XP Professional.  Suddenly, after you have moved the computer from one office to the next, she regularly stops and we get this blue screen that says:

  Technical information:

  STOP: 0X000000D1 (0 X 00000060, 0XAA2AD341, 0000002 0 X, 0 X 0000000)

  WUSB54gcv3.sys - address AA1AD341 base at AA15B000, Datestamp 48 b 66753
  Beginning physical memory dump
  Total physical memory dump
  For more assistance, contact your administrator or technical support group.

  A problem has been detected and Windows has shut down to prevent damage to your computer.

  Drive_IRQL_NOT_LESS_OR_EQUAL

  If this is the first time you've seen this Stop error screen, restart your computer.  If this screen appears again follow these steps:

  Make sure any new hardware or software is installed correctly.  If it is a new installation, ask your hardware manufacturer or software, the Windows updates, you might need.

  If the problem persists, disable any newly installed hardware or software, disable memory options such as caching or shadowing the BIOS.  If you need to use Mode safe mode to remove or disable components of your computer restarts, press F8 to select advanced startup options, and then select Safe Mode.

  Can anyone help?  I installed an update of the necessary BIOS and that did not help and the computer is configured to have Windows Installer automatically what is updated, it needs.

  Thank you.

  Pages 29 and 30

  http://support.Dell.com/support/eDOCS/systems/ins9300/en/OM/om_en.PDF

  Hope this helps, Gerry Cornell

• video game screen causes blue/black screen/freezing

  Hoping for help:

  For some time, I watch any kind of video on my laptop cause a total melt down.  Without warning, appears to be going black and silent, black and his jumping like a disc, or will blue screen and then immediately the black.  It happens almost every time I watch the video, be it online tv or DVD programs.  Normally, I can manually put turned the laptop off and restart with no problem, but I am concerned about the long-term effects on my system.

  I checked that my drivers are up to date, and they are.  Any other suggestions?  Also: the problems multiplied when I downloaded Microsoft Security Essentials.

  Help is greatly appreciated!

  Hi lovers,.

  1. don't you make changes before the show?

  We recommend to set the graphics hardware acceleration and try to play the videos. To do this, try the following steps.
  1. click on start, type personalization in the start search box, and then click personalization in the list programs.
  2. click on display settings.
  3. click on advanced settings.
  4. click on the Troubleshooting tab, and then click on change settings.
  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  5 move the hardware acceleration slider two notches to the left of Full (the Disable cursor and bitmap accelerations setting).
  6. click OK and then click Restart now.
  7. once the computer is restarted, playback and check the result.

  See read an audio or video file: frequently asked questions

  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Desktop and Windows 8 tiles screen freezes and reload continuously.

  When my system starts and loads of my user profile, there is a long pause before the loading screen of the tile. then when the tile appear most is empty and I can't click on anything whatsoever. After about 20 seconds, the screen reloads or resets to the same effect, without interruption. I tried the following

  1) I checked event viewer and found this:

  Windows cannot access the file C:\Users\user\AppData\Local\Microsoft\Windows\Explorer\TileCacheStartView-1162909_80.dat for the following reasons: there is a problem with the network connection, the file is stored on the disc or the storage drivers installed on this computer. or the drive is missing. Windows has closed the Windows Explorer program due to this error.

  Program: Windows Explorer
  File: C:\Users\user\AppData\Local\Microsoft\Windows\Explorer\TileCacheStartView-1162909_80.dat

  The error value is listed in the additional data section.
  User action
  1. open the file again. This could be a temporary problem that can be corrected when the program runs again.
  2. If the file is still not accessible and
  -C' is on the network, your network administrator must verify that there is not a problem with the network and that the server can be contacted.
  -C' is on a removable disk, for example, a floppy disk or a CD-ROM, check that the disc is inserted into the computer.
  3. check and repair file system by running CHKDSK. To run CHKDSK, click Start, run, type CMD and then click OK. At the command prompt, type CHKDSK /F and then press ENTER.
  4. If the problem persists, restore the file from a backup copy.
  5 determine whether other files on the same drive can be opened. If this is not the case, the disc could be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for assistance.

  Additional data
  Error value: C000009C
  Disc type: 3

  I ran CHKDSK in cmd prompt, but no change.

  2) I also did a sfc/scannow, which resulted in "Windows Resource Protection found corrupt files but was unable to fix some of them. Details are provided in convertible bonds. Newspaper %WinDir% \Logs\CBS\CBS.log. »

  3) I run a windows app store troubleshooting see below for the result

  Windows store troubleshoot result

  Problems found

  Details of detection

  5 Cache of Windows Store may be damaged Not fixed

  Reset and open Windows Store Completed

  5 Configuration of the Windows store may be damaged Detected

  Reregister Windows Store Completed

  6 Some security settings are missing or have been modified Fixed

  Some applications would not have access to the necessary resources

  Thank you Shawn,

  After about 8 hours of trial and error, I finally did it.

  After you have identified the problem as a file (TileCacheStartView - xxxxx.dat), which windows explore was not found, (even if the file was in the right folder), I decided to do the following:

  -J' have created a new user profile and connected without any problem. File TileCacheStartView - xxxxx.dat worked in this profile

  -copied new user\AppData\Local\Microsoft\Windows\Explorer\TileCacheStartView-xxxxxdat new profile C:\Users\

  -pasted original profile folder OriginalC:\Users\ \AppData\Local\Microsoft\Windows\Explorer. 

  -past to the original profile

  and it worked miraculously.

• Can cause of Google Chrome that any general Windows questions as screen freeze or startup problems? Thank you.

  Recently installed Google Chrome and started to add some PC problems. This could be a coincidence, but I was wondering if the Chrome can somehow interfere with the operation of Windows. Thank you for any light on the topic.

  Hi Anoop,

  Thanks for your reply. I checked the links you recommended, but did not find anything of note when I checked the logs events or performance. (I can't seek enough carefully.)

  Fortunately, the problem disappeared in the past few days and he can not Google Chrome to what has caused the occasional screen freezes. To answer your questions, Frost moved not just with Google Chrome, there is no error message and I have not recently updated the latest drivers.

  In any case, at the moment seems to agree, and if a conflict between Windows and the Chrome is not a good experience then it's probably just a coincidence that I met problems with my shortly after its installation.

  Once again, thank you for your help.

  Kevin.

• Firefox is very slow to respond when you open and almost always no longer meets the total even refusing to respond to the Task Manager "end program command @.» The ' does not not @ error also happens during navigation online.»

  Firefox is very slow to respond when you open and almost always unresponsive altogether, refusing even to respond to Manager task "End program" command. The "not responding" error message is also over browsing online. Several attempts must be made to get online. A loss of stability seems to be endemic at the present time.

  Try to follow the instructions here: Firefox crashes or does not - how to fix

• Pagefile.sys has completely disappeared. It started when the power failed and my computer crashed.

  My pagefile.sys has completely disappeared. This all started when the power failed and my computer crashed.
  I get the message that he was away, I went to the performance and settings and tried to change custom settings & re-start.

  No matter what I do, nothing works. I lost several hours of visiting sites for tips and nothing seems to help.

  I was told when re-boots WinXP it creates the new file pagefile.sys and I should delete the pagefile.sys file may be corrupted on the C drive.

  So I put the folders to show hidden files and delete pagefile.sys. I have re-set and tried to recover with no success.

  There is now absolutely no pagefile.sys on my C drive. Anyone know how I can get back my pagefile.sys?

  I want to get my virtual memory works again?

  Thank you very much in advance!

  I'd start first with the chkdsk/r.

  Don't forget - if you have a factory installed recovery Partition, fixmbr will scan it as the Master Boot Record that written XP will equal not the MBR installed by the factory, so first run chkdsk /r (did I say that already)?

  Here are some instructions:

  http://pcsupport.about.com/od/fixtheproblem/SS/RCONSOLE.htm

  Where people have no XP bootable media, here are my instructions:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• I'm on windows 7 64 bit, and when I try to save a site by double clicking on the icon star on the address bar, bookmark box flickers power on and off and disappears later

  I'm on windows 7 64 bit and when I try to save a site by double clicking on the icon star on the address bar, bookmark box flickers power on and off and then disappears. I did some research and found that the default theme is the cause. I installed a different theme and the problem goes away and that's why I don't know the root cause. Anyone with ideas on how to solve this problem? I like the default theme!

  Try to uncheck the box next to 'use acceleration hardware when available' in the Options. Worked for me!

• Satellite Pro C50 - A - 1 K 9 - screen flickers power on and off

  Has anyone encountered a problem where the screen flickers power on and off? Mine will Dim to the point where you can't see whats happening and then back to normal.

  I tried a restore drivers, but the problem persisted. I did also check complete anti-virus (I realize that it was probably not the cause of the problem, but decided to be complete). I was thinking that it's purely a hardware problem, like when I use an external monitor connected through a HDMI cable I don't have this problem.

  I guess it must be a problem with the connection between the screen and the motherboard. Maybe a problem within the hinge where they cross connection.

  Anyone got any other suggestions until I sent it off for repair (only he got in March and I have a 2 year warranty, but who goes back to college soon and do not want to be without him).

  I have a Toshiba Satellite Pro C50 - A - 1 k 9.

  Thanks in advance.

  I agree with you, Fraser and think it could be hardware related issue but I don't in any way you can fix it alone. Your laptop must be controlled by the Toshiba service provider.

  Contact the nearest service provider for Toshiba in your country, explain the situation and ask for help.

• Satellite A200 - 1 m 8 slower when you use Power Saver and AC adapter

  HIII

  I have a toshiba Satellite A200 - 1 m 8. Windows XP Pro Sp3

  When the pc is running on AC adapter / normal CC it works correctly and quickly, and when I unplug the adapter and run the pc on battery, that it doesn't...

  But here the problem arises when I reconnect the adapter again (the normal supply battery power switching) the speed of the computer goes down.
  It becomes more annoying and slow navigation, menu programs start running, etc...

  It is very sensitive... not a bit...
  I tried to change the controller to the built-in in windows power management and tests of the same case...
  The speed of the computer works properly...

  I guess the problem is with Toshiba PowerSaver.
  Version is: Toshiba PowerSaver 7.03.07.C

  Concerning

  Hello

  I m not quite sure what could be the reasons for this problem but as far as I know, you can assign the different parameters of basic installation of Power Saver, which could affect the performance of the laptops.
  For example; Control method of the CPU, the processing speed of the CPU, cooling method.

  Please check what power profile was chosen after that the AC adapter is plugged in and if necessary modify some parameters mentioned above.

  Good bye

• Portege Z830 - fan noisy and almost always running

  My new Portege Z830 has the issue of noisy fan and almost always running which has been said here before.

  Recommendations were that we download bios 1.6. But I checked and that the version is already installed on my machine. I also adjusted the power save mode battery parameters as others have suggested. But that made no difference,

  All the other tips has been give in technical language far this beginner.

  If anyone has any suggestions they might put in words of one syllable and the step by step instructions, I would be eternally grateful. Thank you.

  I found also two documents from Toshiba on exactly this topic and as saying that update BIOS version 1.60 or higher would solve the problem

  Portege / Satellite Z830 high cooling fan speed.
  http://APS2.toshiba-tro.de/KB0/TSB23039P0000R01.htm

  and

  How can I improve the control of the FAN on the Satellite and Portégé Z830?
  http://APS2.toshiba-tro.de/KB0/FAQ22039H0002R01.htm

• Satellite L455 - plug-and - battery LEDs power LED and it flashes orange

  I have a Satellite L455, which worked perfectly for more than six months now, but two weeks ago he began to behave strangely.

  I turned off the machine normally in the evening I was going to sleep. In the morning when I turned on it it turned on, HARD drive and on power LED blinked blue for a few seconds then they are gone. Machine does not start. I tried to turn it on again and it does the same thing. Then I saw the "power plug on" and "battery on" LED flashes orange at the same time. I unplugged the power adapter. Both lights were continuous blinking but machine will not feed. I removed the battery for a piece of 5 minutes, then reinserted it and the machine has worked all day.

  I went he deleted off the power plug and the morning again it wouldn't start until the when I removed the battery for a few minutes then it works again. The battery recharges very well that when I remove and reinsert it even without connecting the power cable still lights up and works perfectly.

  Then, I removed the battery and the power supply Plug and you press the power button for 30 seconds to unload the machine and then return power and battery and it worked until I turned off again and shutting off the power and then it didn't once again.

  If I stop just of machine and do not turn off the power cord, then I can turn it back on to and work with the machine without hassle even for three days without interruption.

  What could be wrong? Any help will be really appreciated.

  Concerning
  Yusuf

  Hi chidzungo,

  It must certainly be a hardware malfunction but he s strange why it pops up every day after you have closed the laptop. Do you use batteries and AC/DC to original Toshiba adapter? Have you connected external devices to your laptop? If so delete them before you turn on your laptop.

  What version of BIOS is installed at the moment? You should look on the Web from Toshiba website for an update. Update of the BIOS might also help and it s worth a try.

  Before you start reading the BIOS BIOS update instructions update [HERE: http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=60]

  Satellite L455 seems to be an American model, so the BIOS update can be downloaded from the Toshiba U.S. page but first check the exact part number:
  http://www.CSD.Toshiba.com/

• Hi I find a problem with my iPad... I delete almost everything about him and he always tells me almost full storage! can someone help me on this problem pls thank you

  Hi I find a problem with my iPad 2 Air... I delete almost everything about him and he always tells me almost full storage! can someone help me on this problem pls thank you

  Hello

  Try a reboot press & hold the power button / stop & menu button

  Hold both down until you see the Apple logo.

  What is your ipad 16g / 32g or higher?

  See you soon

  Brian

• New power supply and logic board?

  I need to get a new power supply and the logic board put in my iMac - when I did, this is my iMac will be indented from the base/settings (i.e. will I need to put everything on my external hard drive to backup) or will all my personal data / records/work etc., always be on it?

  All your data, applications, and settings are on the hard drive, if that is not replaced everything will be as it was. That said, you should always have a backup before you take your mac at home.

• My computer is stuck on the 3/3 update, and even if I force power off and restart, that just guard on that happening. What can I do?

  I run windows vista on my pc, and every time that I turn it on, it just sits on the 3/3 update and will not progress. Even when I force my PC to power off and restart it, it continues to be. The first time he tried this update, I have dropped about 3 hours and returned to the configuration to update: stage 3 of 3-0% screen. Since it always happens. My pc is unusable because of this. What can I do?

  .. .my computer came pre-installed with vista, so I do not have a disk

  Not that I recommend a repair install, but the manufacturer was required to provide a way to reinstall Windows. If the computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to reinstall Vista.

  Assuming that Vista SP2 is not installed, I recommend you open a free support incident, NIC. See the link in my previous answer. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft