WndOws guard program update omitting 80073712 and reinstall does not
I have a desktop with Windows 7 64 bit. The windows update program keeps failing and I think I need to reinstall windows.
Dell sent me the original windows disc that came with my PC.
The installation works fine until after it copies the files. During the identification of system files, I get the following message:
Error: Setup cannot continue. Restart the computer and then restart the installation. When you are prompted, try to get the latest updates.
I did this several times.
I also tried to run twice with all my software security disabled.
Any help would be greatly appreciated. I don't want a restoration of the system, if possible.
Hello
-You try to perform an installation to upgrade, or own Windows 7 on-site?
Try the methods provided that follows and we update with the results.
Note: Before you begin, I suggest you remove any external hardware that is connected to the computer.
Important: I suggest you first backup your important information and files of other partitions or other disks.
Method 1: You can run the Check disk utility and check.
a. click the Start button, type "cmd" (without the quotes) in the search bar.
b. right-click on the result of the search, and then click Run as administrator.
(c) in the command window open, type the following command and press ENTER after him.
Chkdsk /f /r
d. Please, type Y and press ENTER.
e. Please restart the computer and check with the question.
Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
Method 2: Run the clean boot
To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Please note: After troubleshooting, be sure to start your computer in normal mode by following step 7.
I hope that helps!
Tags: Windows
Similar Questions
-
Hi all
I installed the JDeveloper 11.1.1.6 version on my laptop with windows 7 64-bit OS. It worked very well with applications I've built on ADF. However, when I updated the Webcenter extensions with help-> check the JDeveloper IDE updates, and once the update is finished, I rebooted the JDev. But after restarting of JDev, ADF applications no longer work. Infact, the server does not even start. It gives me the following error:
java.lang.NoClassDefFoundError: v11, 1, 1, 6\jdeveloper
Caused by: java.lang.ClassNotFoundException: v11.1.1.6\jdeveloper
in java.net.URLClassLoader$ 1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged (Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
The main class is not found: v11.1.1.6\jdeveloper. Program ends.
Exception in thread "main" process is completed.
Here, I put the whole journal which proved when I tried to start the JDeveloper Server (integrated Weblogic Server).
[Waiting for the field to complete the construction...]
[10: 26:44] integrated Weblogic domain Extension...
[10: 27:26] integrated Weblogic domain completed successfully.
Using the 7101 port *.
C:\Users\Mahesh\AppData\Roaming\JDeveloper\system11.1.1.6.38.62.29\DefaultDomain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
.
.
Arguments of memory in JAVA: - Xms256m-Xmx512m - XX: CompileThreshold = 8000 - XX: PermSize = 128 m - XX: MaxPermSize = 512 m
.
Start mode of WLS = development
.
CLASSPATH=C:\Oracle\MIDDLE~1.6\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar; C:\Oracle\MIDDLE~1.6\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar; C:\Oracle\MIDDLE~1.6\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar; C:\Oracle\MIDDLE~1.6\JDK160~1\lib\tools.jar; C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\lib\weblogic_sp.jar; C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\lib\weblogic.jar; C:\Oracle\MIDDLE~1.6\modules\features\weblogic. Server.modules_10.3.5.0.jar; C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\lib\webservices.jar; C:\Oracle\MIDDLE~1.6\modules\ORGAPA~1.1/lib/Ant-all.jar; C:\Oracle\MIDDLE~1.6\modules\NETSFA~1.0_1/lib/Ant-contrib.jar; C:\Users\Mahesh\AppData\Roaming\JDEVEL~1\SYSTEM~1.29\DEFAUL~1\wcps-lib\derby-10.6.1.0.jar; C:\Users\Mahesh\AppData\Roaming\JDEVEL~1\SYSTEM~1.29\DEFAUL~1\wcps-lib\derbytools-10.6.1.0.jar; C:\Oracle\Middleware v11.1.1.6\jdeveloper\webcenter\modules\oracle.portlet.server_11.1.1\oracle-portlet-api.jar; C:\Oracle\Middleware v11.1.1.6\jdeveloper\webcenter\modules\wcps_11.1.1.4.0\wcps-connection-mbeans.jar; C:\Oracle\MIDDLE~1.6\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar; C:\Oracle\MIDDLE~1.6\WLSERV~1.3\common\derby\lib\derbyclient.jar; C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\lib\xqrl.jar
.
PATH=C:\Oracle\MIDDLE~1.6\patch_wls1035\profiles\default\native; C:\Oracle\MIDDLE~1.6\patch_jdev1111\profiles\default\native; C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\native\win\32; C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\bin; C:\Oracle\MIDDLE~1.6\modules\ORGAPA~1.1\Bin; C:\Oracle\MIDDLE~1.6\JDK160~1\jre\bin; C:\Oracle\MIDDLE~1.6\JDK160~1\Bin; C:\app\Mahesh\product\11.2.0\dbhome_1\bin; C:\oraclexe\app\oracle\product\10.2.0\server\bin; C:\Program Files (x 86) \Intel\iCLS Client\; C:\Program Files\Intel\iCLS Client\. C:\Program Files\Common Files\Microsoft Shared live; C:\Program Files (x 86) \Common Files\Microsoft Shared live; C:\Windows\System32; C:\Windows; C:\Windows\System32\Wbem; C:\Windows\system32\WindowsPowerShell\v1.0\; C:\Program Files (x 86) \Common Files\Roxio Shared\DLLShared\; C:\Program Files (x 86) \Common Files\Roxio Shared\OEM\DLLShared\; C:\Program Files (x 86) \Common Files\Roxio Shared\OEM\DLLShared\; C:\Program Files (x 86) \Common Files\Roxio Shared\OEM\12.0\DLLShared\; C:\Program Files (x 86) \Roxio\OEM\AudioCore\; C:\Program Files (x 86) \Windows Live\Shared; C:\Program Dell Data Protection\Access\Advanced\Wave\Gemalto\Access Client\v5\; C:\Program Files (x 86) \NTRU Cryptosystems\NTRU TCG Software Stack\bin\; C:\Program Files\NTRU Cryptosystems\NTRU TCG Software Stack\bin\; C:\Program Files\Intel\Intel (R) engine management Components\DAL; C:\Program Files\Intel\Intel (R) engine management Components\IPT; C:\Program Files (x 86) \Intel\Intel(R) Components\DAL to engine management; C:\Program Files (x 86) \Intel\Intel (R) management engine Components\IPT; C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\native\win\32\oci920_8
.
***************************************************
* To start WebLogic Server, use a username and *.
* password assigned to an administrator-level user. For *.
* server administration, using the WebLogic Server *.
* the http://hostname:port\console console *.
***************************************************
from weblogic with the Java version:
Java version "1.6.0_24".
Java (TM) SE Runtime Environment (build 1.6.0_24 - b50)
Java Client VM (build 19.1 - b02, mixed mode)
WLS starting with line:
C:\Oracle\MIDDLE~1.6\JDK160~1\bin\java-client-Xms256m-Xmx512m - XX : CompileThreshold = 8000 - XX : PermSize = 128m - XX : MaxPermSize = 512m-Dweblogic.Name=DefaultServer-Djava.security.policy=C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server\lib\weblogic.policy «-Djavax.net.ssl.trustStore=C:\Oracle\Middleware v11.1.1.6\wlserver_10.3\server\lib\DemoTrust.jks »-Dweblogic.nodemanager.ServiceEnabled=true - Xverify : aucun-da-Dplatform.home=C:\Oracle\MIDDLE~1.6\WLSERV~1.3-Dwls.home=C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server-Dweblogic.home=C:\Oracle\MIDDLE~1.6\WLSERV~1.3\server-Djps.app.credential.overwrite.allowed=true-Dcommon.components.home=C:\Oracle\MIDDLE~1.6\ORACLE~1-Djrf.version= 11.1.1 - Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger-Ddomain.home=C:\Users\Mahesh\AppData\Roaming\JDEVEL~1\ SYSTEM~1.29\DEFAUL~1-Djrockit.optfile=C:\Oracle\MIDDLE~1.6\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt-Doracle.server.config.dir=C:\Users\Mahesh\AppData\Roaming\JDEVEL~1\SYSTEM~1.29\DEFAUL~1\config\FMWCON~1\servers\DefaultServer-Doracle.domain.config.dir=C:\Users\Mahesh\AppData\Roaming\JDEVEL~1\SYSTEM~1.29\DEFAUL~1\config\FMWCON~1-Digf.arisidbeans.carmlloc=C:\Users\Mahesh\AppData\Roaming\JDEVEL~1\SYSTEM~1.29\DEFAUL~1\config\FMWCON~1\carml-Digf.arisidstack.home=C:\Users\Mahesh\AppData\ Roaming\JDEVEL~1\SYSTEM~1.29\DEFAUL~1\config\FMWCON~1\arisidprovider-Doracle.security.jps.config=C:\Users\Mahesh\ AppData\Roaming\JDEVEL~1\SYSTEM~1.29\DEFAUL~1\config\fmwconfig\jps-config.xml-Doracle.deployed.app.dir=C:\Users\Mahesh\AppData\Roaming\JDEVEL~1\SYSTEM~1.29\DEFAUL~1\servers\DefaultServer\tmp\_WL_user-Doracle.deployed.app.ext=\--Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1.6\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1.6\ORACLE~1\modules\oracle.oamprovider_11.1.1-Djava.protocol.handler.pkgs=oracle.mds.net.protocol-Dweblogic.jdbc.remoteEnabled=false-Dwsm.repository.path=C:\Users\Mahesh\AppData\Roaming\JDEVEL~1\SYSTEM~1.29\DEFAUL~1\oracle\ store\gmds-DUSE_JAAS = faux - Djps.policystore.hybrid.mode=false-Djps.combiner.optimize.lazyeval=true-Djps.combiner.optimize=true-Djps.auth=ACC-Doracle.core.ojdl.logging.usercontextprovider=oracle.core.ojdl.logging.impl.UserContextImpl - noverify-Doracle.webcenter.analytics.disable-native-partitionnement = faux - Doracle.webcenter.tagging.scopeTags=false - XX : + UseParallelGC - XX : + DisableExplicitGC-Dportlet.oracle.home=C:\Oracle\Middleware v11.1.1.6\jdeveloper-Dwc.oracle.home=C:\Oracle\Middleware v11.1.1.6\jdeveloper-Dweblogic.management.discover=true-Dwlw.iterativeDev=-Dwlw.testConsole=-Dwlw.logErrorsToConsole=-Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1.6\patch_wls1035\profiles\default\sysext_manifest_classpath ; C:\Oracle\MIDDLE~1.6\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic. Server
java.lang.NoClassDefFoundError: v11, 1, 1, 6\jdeveloper
Caused by: java.lang.ClassNotFoundException: v11.1.1.6\jdeveloper
in java.net.URLClassLoader$ 1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged (Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
The main class is not found: v11.1.1.6\jdeveloper. Program ends.
Exception in thread "main" process is completed.
Could someone help me please in this regard. I am stuck and had to reinstall JDev, not being able to solve this problem.
Sincerely,
Mahesh.
Mahesh,
JDeveloper almost always has problems when the installation folder path contains spaces. For example, your way "C:\Oracle\Middleware v11.1.1.6\".
I suggest that you reinstall JDeveloper in a path without spaces. You may be able to get away with just rename the folder "Middleware_v11.1.1.6".
-
after upgrade firefow does not start and reinstall does not help
Last week updated firefox and I can't use it since safe mode does not work, will not work reinstall I get a memory error code, pls help
Submit incident reports at Firefox?
If you have submitted reports of incidents, then thanks post IDS of one or more reports of incidents that have this format:
- BP-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
You can find the ID of the submitted crash reports on the Subject: hangs page.
- You can open the Subject: hangs page through the address bar, you open a Web site.
See:
- http://KB.mozillazine.org/Mozilla_Crash_Reporter
- https://support.Mozilla.org/KB/Mozilla+Crash+Reporter
If you cannot open Firefox, see:
-
When I click on he App Store update, he said first a reboot is required, then it just happens before the restart, a pop up advising me that updates have changed and offers 2 options: 1) cancel, which does nothing and 2) show invisible characters, which also does nothing. I rebooted several times and it still does not work. What should I do?
In some cases, this error message is caused by a problem in the network. Please restart your router and your device at wide band, if they are separated. If there is no change, see below.
This procedure will remove some temporary and cache files. The files are generated automatically and do not contain any of your data. Sometimes they can become corrupted and cause problems like yours.
Please, back up all data and read this message before doing anything.
Triple-click anywhere in the line below on this page to select this option:
/var/folders/zz/zyxvpxvq6csfxvn_n00000s0000068
Right-click or Ctrl-click on the highlighted line and select
Services ▹ reveal in Finder (or just to reveal)
the contextual menu.* file should open with a selected subfolder. The subfolder has a long name beginning with "zyx" and ending with "68". Place this subfolder in the trash. Do not move other subfolders with similar names. You may be prompted for administrator login password. Restart the computer and empty the trash.
* If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select
Go ▹ go to the folder...
from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.
-
Get error messages, uninstalling and reinstalling does not solve the problem
As a first step, Indesign gave a message error "hyphenation breaks may change if you change...". »
I uninstall and reinstall the application. When I open Indesign I had several alerts start as "could not load Publishing.IndesignPlugin digital because it takes"JBX"...". »
InDesign asks me to install plugins and restart Indesign. I don't know how to do this.
Then, I get an error «the document uses one or more plugins...» »And after that, I get the message "hyphenation breaks may change if you change...". "(again).
When I try to work in Indesign shortcut keys do not work.
I tried uninstalling and reinstalling several times, used AdobeCreativeCloudCleanerTool, restart the mac, but keep it alerts popping up when I open Indesign start-up.
Could someone tell me please how to fix this?
Finally I got it fixed... I installed on another mac indesign. The folder plugin of this installation was complete. I transferred this plugin folder for my iMac and restarted the mac. When I opened Indesign, it seemed to be ok.
-
updated flash player and still does not work.
Recently, my games on Facebook and Youtube stopped working and prompted me to update my flash player.
He included the link to Adobe, like all the sites who need.
So, I did. It says successful installation, but it does not work. When I check to see if any version, I see the Red Cross. Help, please.
I use Windows XP Version 2002 Service Pack 3
I.e. 8 32-bit.
P.S. I use Firefox and Chrome, but I don't like the quality of how Flash Player works on them.
Hi, I see the other thread that you comment that the Kill bit is your problem. Glad that worked for you :-)
Reference thread: http://forums.adobe.com/thread/829621?tstart=0
If you, please mark this thread as answered even tho your solution was not from here.
Thank you
eidnolb
-
After Firefox 13 update of Gmail and Twitter does not
I've updated to Firefox 13 and now Gmail and Twitter are very slow or not to load any. I've updated my plugins, I cleared the cache and cookies. What can I do else? Thank you.
Hello, some other users have reported the same questions for gmail & twitter with activated SPDY (which has been introduced in firefox 13).
enter Subject: config in the address bar and search for the preference named network.http.spdy.enabled and activate false by double-clicking on it - this disables the spdy Protocol. Please see if that works and a report. Thank you!
-
downloaded firefox update 3 times and it does not work
I just started to use firefox on my pc which has windows 7. I get a message saying that I need to update the version of firefox, so I down load it and it says it is downloaded (I now have it 3 times), but it is not executed and still keepstellin me I need to update? Should I just go back to internet explore?
Your browser has reported on the forum that you are using version 3.6.6. Can check you that using the help > dialogue on Firefox?
What file did you download: Firefox Firefox 10.0.2 or 3.6.27?
(If you need to download again, you can choose the files on these pages):
http://www.Mozilla.org/en-us/Firefox/all . for 10.0.2 or
( http://www.mozilla.org/en-US/firefox/all-older to 3.6.27)Make sure to close Firefox before running the installer for the latest version. Do you get any error messages when you start? It may take a minute for the installer to check itself before you get a dialog box.
-
Error code 646 for the update KB 980376 and KB2202131 does not download on Windows Vista
Cannot download 980376 KB and KB 2202131 on Windows Vista Edition Home Premium
enterprising,.
the KB includes an automated fix this that solves the problem. Look here: http://support.microsoft.com/kb/2258121
-
If repair office did nothing you need to perhaps totally uninstall and reinstall office.
You will of course need your original media and product key.
TaurArian [MVP] 2005-2010 - Update Services
Another thread would not answer - stupid MS... In any case
Uninstall and reinstall does not resolve error 646.
MB
Michael
Well, sometimes it happens. I had a problem with Office on a neighbour and uninstall HP computer and reinstalling Office, it has not fixed the problem only a complete new beginning. You probably don't want to go to this extreme, then I suggest that you continue to download and manually install the office updates.
http://support.Microsoft.com/kb/971058
How to reset the Windows Update components?TaurArian [MVP] 2005-2010 - Update Services
-
FP crashing in IE and FF; Reinstall does not help not
Windows 7 64 - Bit on a Dell laptop for 2 years (Studio 1745).
During the past year, I had the following problem: each player from time to time flash will decide to stop working and will break in IE and Firefox. The browser freezes for about 30 seconds, then the message "Flash Player broke down" "send a crash report" appears. My standard solution for fixing this is:
-run a standalone uninstall
-Delete everything in appdata/roaming/adobe
-Delete everything in appdata/roaming/macromedia
-delete c:/windows/syswow64/c:\windows\system32\macromed
-Reinstall the current version (separately for each browser, sometimes as a plugin for FF)
Most of the time this could fix things; Sometimes I have to do two or three times but in the end everything would work. I could watch youtube videos, play games on kongregate, and teach an online course that uses flash.
It crashed this morning (when using gmail work, something I do every day) and reinstall does not work.
I've tried a few things. I could see the animation on http://www.adobe.com/software/flash/about/, and from there I was able to disable hardware acceleration. That did not help. I thought that Firefox can be something weird with it, so I reinstalled firefox, no luck. I tried rather install a debug build: 10,2,159,1. This still crashes things. I have not yet tried to roll back to, say, Flash Player 9, but this seems to be a rather extreme solution as something else is clearly wrong.
Any ideas/thoughts would be welcome. Memory problem? Video drivers? I'll try anything at this point.
Thank you!
Could you open a new bug on this issue over at bugbase.adobe.com? Here is a post that describes the information that we need and instructions to generate a crash log:
How to report an accident with Flash Player
The journal of the accident might be essential to understand what is happening. In addition, I would recommend install the Flash Player 11 rc drive to see if that helps.
Thank you
Chris
-
BlackBerry smartphone App World and Facebook does not!
After the operating system update - My Facebook and AppWorld does not give the error "you do not have a sufficient wireless coverage or your connection to the wireless network is turned off" - App World... "You are currently on a service plan that does not support its application. If you want to use this application, please contact your service provider to upgrade your data Plan "-Facebook..." But my phone is connected to a working Wifi - Twitter App and browser work well
Ereeamazing wrote:
Not connectedNo BBM service on the device... a quick search of the forums here would have told you, since you're "Great contributor", you need to know how to search the forums for others solved same issues you encounter.
On your BlackBerry device, go to:
1. on OS5 devices: Options > advanced > host Routing Table > Menu > register.
On OS6 devices: Options > device > advanced > host Routing Table
2 send your service from your carrier's BIS site books:
Of your handheld: http://www.blackberry.com/btsc/KB15402Go to the Personal Email Set Up icon and sign. Then under help!, select Service books and select send service Books.From your desktop PC: http://www.blackberry.com/btsc/KB02830North American carriers - scroll to select your carrier
Carriers worldwide - find your operator from the list3. with the BlackBerry device powered time, remove battery for a few seconds and then reinsert the battery to restart. This restart, even if you have already done this, is often necessary to install the service books.
-
I got creative cloud, InDesign now says the trial has expired and I have to buy the program. It seems that it does not update I already have a plan. How can I do to?
If I pay for a product that I can't use.Using creative cloud | Applications creative Cloud back to update evaluation Mode to 2015 CC
-
My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?
They are only updated office or all updates?
For Office updates, usually to pick up the item at the: http://www.microsoft.com/downloads/en/default.aspx
then manually download and install the same.
If all updates, perhaps consider the following general tips-
Option: File of Windows Update agent wups2.dll is incorrectly registered and the registry associated with the Wups2.dll file files are missing.
Method 1: Save the Windows Update files
1. Click Start and type notepad in the box start the search.
2. click on Notepad in the list programs.
3. copy the following commands, and then paste them into the opened Notepad window:
REGSVR32 WUPS2. DLL/S
REGSVR32 STINKS. DLL/S
REGSVR32 WUAUENG. DLL/S
REGSVR32 WUAPI. DLL/S
REGSVR32 WUCLTUX. DLL/S
REGSVR32 WUWEBV. DLL/S
REGSVR32 JSCRIPT. DLL/S
REGSVR32 MSXML3. DLL/S
4. in Notepad, on the file menu, click Save as.
5. in the file type list, click all files.
6. in the file name box, type register.bat.
7. save the Register.bat file to your desktop.
8 right-click the Register.bat file, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password or click on continue.
9. try to reinstall updates.http://support.Microsoft.com/kb/958053
See: method 1: save the Windows Update fileshttp://support.Microsoft.com/kb/326253
Method 5: Registry Windows Update engine fileshttp://support.Microsoft.com/kb/971058
How to reset the Windows Update components?Method 2: Download and install Windows Update agent
Windows Update Agent
How to get the latest version of the Windows Update Agent to help manage updates on a computer
http://support.Microsoft.com/kb/949104Information for network administrators about how to obtain the latest Windows Update Agent
http://support.Microsoft.com/kb/946928Click Start, click run, click Browse, navigate to the file you saved and click Open.
Add the switch /wuforce at the end of the command run and then click OK. For example, the command run might look like this: "C:\WindowsUpdateAgent30-x86.exe" /wuforce
Click run.
Follow the steps to complete the wizard.
Important
To reinstall Windows Update Agent - download the relevant file from one of the links provided above and save it to a drive where Vista is not loaded because the file cannot be launched directly from the root directory of the system.
Click Start, run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce" (without the quotes) and press ENTER to install the Windows Update engine.
Note: There is a space between "D:\WindowsUpdateAgent30-x86.exe" and "/ wuforce.
D: is the drive where Windows is not installed (IE a flash drive or a 2nd hard drive etc.)
TaurArian [MVP] 2005-2010 - Update Services
-
Automatic update failed, and Windows does not start
I am running Windows 7 and it does not start. Automatic update started as soon as my computer is awakened from his sleep. It closed several programs. The update had completed 30% when he stopped to restart the computer. As windows began, I got a blue screen message telling me that it didn't start. I tried to restore the system at two different times, but both failed. I'm not sure that I can do.
How do access you the system restore?
If through the repair of this selection of the computer in the Safe Mode menu - have you tried to use the Safe Mode? If so, what happened?While waiting for a response, please try these free diagnostics, bootable: http://www.carrona.org/initdiag.html
Maybe you are looking for
-
Scripts not working is not in Facebook since the upgrade to v25.0
No problem using Facebook until the upgrade to v25.0 this morning. Now, I can't read my PM, post anything or register a "like." Nothing is based on a script works. No problem in Internet Explorer if. I'm alone with this problem?
-
HP 8500 has showing vertical red lines on all the documentation scanned with the ADF
I had scanned a doc with red ink which I guess was still a little damp. I have cleaned the rollers, but still get a few red vertical lines on copies scanned on the ADF. Help please.
-
Change the password of the router
My problem is with a Macbook. When I installed, I used the installation DVD and no problem with the wifi. At the moment my password changed, the operating system exceeded that on my installation disc (IE I now use OSX 10.9.4 while the original DVD su
-
Vista does not start, go straight to the Startup Repair / can not solve the problem
5 month old Dell Inspiron 1440, Vista system unbootable, goes directly into the Startup Repair tool, tried F8, tried restoring, tried booting in the safe, he always comes back to the Startup Repair MessageProb event name StartupRepair V2Prob GIS 01 A
-
Printers HP e-all-in-one, 4622. Does not print the page of the website.
Windows XP. Starting yesterday will not print page of the website. Cannot print My Documents. Get the message "an error has occurred in printing". The following screen shows "save the file under...". ». Have you tried another USB port and a comp