WNDR3700v2 dropped connection and other issues

Similar Questions

• My photo booth app [version8.0 (806)] does not work. Sometimes, shows a message saying: "there is no camera connected" and others shows just a black or white screen. I can't do anything about it.

  My photo booth app [version8.0 (806)] does not work. Sometimes, shows a message saying: "there is no camera connected" and others shows just a black or white screen. I can't do anything about it.

  More than likely your MBP has a hardware problem that cannot be properly addressed at an Apple store genius bar.

  You can try to reinstall an OSX, but I doubt if that will be successful.

  Ciao.

• My Windows 7 Pro system has some serious hardware, internet connection and security issues. The system image and restore the system in case of failure.

  My Windows 7 Pro system has some serious hardware, internet connection and security issues.

  My efforts to remedy by restoring a system image backup failed.  At this point, I'm ready for a new clean install if I have to buy a drive to do.  My question is whether a professional Ultimate upgrade will or will not fix these bugs.  In addition, what is the cause of restoring the system to fail?  I never turned off or cannot create regular restore points.

  Original title: upgrade a "Fix" for existing system problems?

  My Windows 7 Pro system has some serious hardware, internet connection and security issues.

  My efforts to remedy by restoring a system image backup failed.  At this point, I'm ready for a new clean install if I have to buy a drive to do.  My question is if an upgrade to Professional Ultimate will be or not correct not these bugs.  Also, what is the cause System Restore to fail?  I never turned off or cannot create regular restore points.

  Hello

  1 re-installing/repairing software will not fix hardware issues.

  2. the operating system upgrade is not the way to solve computer problems that can be carried forward.

  3 1. If you use Norton, you should disable Norton inviolable Protection before using System Restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  AVG will cause problems with SR too.

  «Temporarily disable AVG»

  http://www.Avg.com/ww-en/FAQ.Num-3857

  2. try to use Safe Mode system restore.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  "Start your computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  3 Malware will stop at the system restore.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  ____________________________________

  We really need for more details:

  "My Windows 7 Pro system has some serious hardware, internet connection and security issues.

  See you soon.

• Problem with iTunes gel preferences and other issues.

  I don't know why, but the week last iTunes randomly decided to not work: whenever I try to open the preferences panel it hangs and release only randomly after a few minutes only to freeze again when I change the tabs. Also, all devices that I connect so that open freezes iTunes, yet once it thaws in itself rarely after waiting an hour or more but crashes again soon after.

  I tried everything short of wiping the disk and start from scratch (not an option to be honest): followed every single link help I found on Apple's site, used several malware scanner, defragmented, made several clean install iTunes and its components.

  I'm on an ASUS N53SV win 10, latest version, all the updated drivers. I don't really know what else remains.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Sound and other issues with Qosmio x 300-11

  Hello

  I purchased a Qosmio x 300-11s there are a little over 2 months. I have usually more than 1 audio application on at a time, for example radio game world of warcraft, but since today if I try to run more than 1 sound application or a program like world of warcraft which runs to several sound channels at once I get nothing. The sound stops completely right, I can also hear the fan hitting the basis if I up the laptop a little on the side. In games and other things, that he also got a little slow, Warcraft as much as the drop in 50-15 FPS, but which could also be a problem in game. Did I do the fix try the sound and the fps of the laptop or is it an internal problem maybe

  The game slows down could be related to the problem I have with temperatures on my 300 x 11 s. You can download a temperature monitoring tool like HWmonitor [http://www.cpuid.com/hwmonitor.php] and [http://www.ozone3d.net/benchmarks/fur/] Furmark to measure the temperature of the gpu, then all running stability test mode non-plein screen and post back with the gpu reported max temperature.

  Mine will reach close to 100 c while performing this test and I bought it 3 weeks ago. I hate the idea of what it will be like when a little dust deposits on the fan

• Start-up and other issues

  The other night, I was dl a game from one of the links you get in games in program files. Everything was fine until I tried to install it then the pc froze. I cut the power he turned his back and he got to the homepage then went black, then I myself ran safe mode 3 virus and antispyware, had to do a restore to start just so he can show all of my office and other. I'm not sure what goes on with the pc, but I was going to just make a recovery, I think that is what they're calling a reformat now, one day, if not let me know lol. I don't have a disc for the pc, they told me at the store windows no longer gives records, nor do I have a return to the high drive could never get to burn for me. I know I can go and do it as problem of recovery is when I'm not in safe mode and the pc gives me a full boot, I can't do anything. It is not to connect to the internet, if I try to click on everything about windows I get this lil swirly circle. Sorry I'm not very familiar with the technical names but I think I got my point in. If someone could help me to reformat to back I would really appreciate it. I have a hp all in one desktop pc. Thank you.

  Hello

  in windows 7 you have cmd and then run as administrator and check...

  will help you!

  * By clicking on the laurels! White Star is a great way to say thank you on any post that you helped or solved the problem.* *.
  * By selecting 'Accept as Solution' for an answer that solves your problem helps others who are searching the Web for an answer *.

• Can't get out administrator accout and other issues

  Hello
  I don't seem to be able to disconnect from the administrator on the setting of a standard user account.  It is this way for a very long time.  Is it Ok?  I'm not banking online or buy products, so I think I'm pretty sure.

  The other problem is with a block on my backup utility.  It has already happened and usually disappears after a few months.

  Security software is off at the start and the third-party firewall.  It's ok, as long as I do not initiate a connection and start everything manually.

  True not concerned, but mostly just want to know why?
  Troy
  *******

  Hi Troy Montana,

  Have you been able to solve the problem?

  You can also try to create a new user account and check if it works.

  For more information, you can consult the following link and try the steps to correct the corrupted user profile.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• BlackBerry Smartphones Bluetooth and other issues

  Hi all.

  I'm new here and I'm new to Blackberry.

  First off the coast, I had a Blackberry 9000 last week, but she has someone to another email set up on this subject and I can not understand how to change. I downloaded to my computer and it connected but I have no idea how to change because I want to set up a google mail.

  Then, I have a problem with bluetooth. I can connect to other damage and it works very well on the hands-free and also I can send files ok but I can receive even if I have been through the creation and does what I think allows files to be received.

  Then I tried to use Tapatalk to some of the other forums that I use, but every time that I down load the application I does not work on my phone, it says only: can not be found. Now I have asked on the tapatalk forum but have had no response, so I was wondering if anyone here has tapatalk running on BB here and if there is something I need to do

  Thanks for looking Ste

  Hi and welcome to the forums.

  first to change ar add email accounts, you must go to the home screen and select the installation folder, u must find the icon of configuration of the e-mail that allows you to edit, delete or add emails

  (if you don't see the e-mail configuration icon then you don't have a data plan and you need to call your provider and activate a plan of "blackberry internet service".)

  and on receipt of files via bluetooth to the phone smart BlackBerry does not appear on other devices unless u manually select "receive via bluetooth' could be done from the icon 'media' on your home screen click on support and then use the blackberry key and select"receive via bluetooth ".

  about browser you can use the wap browser that costs, when you set up a wifi connection, you need to manually switch the browser 'hotspot', that could result from the inside of the browser application by pressing the blackberry button, then selecting options, and then click the browser then your browser you will find 3 browsers wap browser that costs , the internet browser which is based on a data plan and the browser of access point which is your target if your wifi on.

  in the application you have trouble with I've never heard of him or used so I'm sorry but I can't do u advice on something, unless I have an experience with.

  hope that helps.

  Guilbert

• Refresh after Windows10 resembles the old Firefox; all pages in FF look 'safe mode' and other issues.

  Hello

  I recently downloaded Windows 10 and noticed FF goes really slowly. So in some way I have refreshed it. I knew that this would erase some bits of data, but now I am unable to restore things.

  It looks like an earlier version. When I go to any page FF, everything appears in a list. I can't choose a new theme, for example, b/c the Mozilla page cannot display graphics. In addition, I'm typing this in Chrome b/c there is no text box when I open this page in FF. I don't want to go back to Chrome.

  Thank you!

  Thank you, in this case, please turn off https scanning in avast, as it is known to cause various problems:

  1. Open the Avast dashboard on an affected system.
  2. Select settings in the left side menu.
  3. Adopt a Protection Active.
  4. Click on customize next to the Web Shield.
  5. Uncheck the option "Enable HTTPS analysis", and then click ok.

  http://www.gHacks.NET/2014/10/31/avasts-HTTPS-scanning-interferes-with-Firefox-and-other-programs/

• 2.2 wireless wifi now unusable and other issues

  Already with my DroidX and 2.1 update, I could use my wireless network.

  Now, after the 2.2 update. It continuously (every several seconds) says 'Detected connection' and then connects. Then the WiFi icon in the status bar goes away. Then I get a "connection detected", etc. on a plus! "

  I use a NetGear WNDR3700 with firmware V1.0.4.68NA. Installation program for WPA - PSK [TKIP] + WPA2-PSK [AES] mode. It worked before without any problem on 2.1. But now with Froyo (2.2)...

  Even though I have full force on the WiFi bars, what is happening.

  After updateing to 2.2, I pulled my battery, waited, and then restarted. Always the same question.

  I then went to WiFi Manager, deleted my settings and he added again with the password for my wireless. Always the same.

  I'm headed to transfer power to the wireless router, but I have no ' I think that will help.

  On a positive note on WiFi, I like notifications in the status bar, and I don't see the options to use the PIN WPA mode, which are beautiful additions. However right now I can't use Wifi in my house.

  
  

• Drains batteries so fast without connected mobile and wifi and other issues on my Z3

  I bought my camera 2 days ago and based on my observation, my battery life lasts that long... I've been a user of iOS before I switched to Sony... I can make the difference of autonomy... in which Sony should have autonomy more than iOS phones. HELP PLEASE!

  @Kaizentian

  Reinstall the latest update with the CCP

  PC Companion (CCP)

  Bridge (for Mac)

  Alternatives on how to backup Xperias

  http://talk.sonymobile.com/thread/36355

• ESXi 4.1, ESXi 5.1 - migration of data base and other issues

  Hello, we have a pretty small environment ESXi 4.1 Enterprise Plus
  with 3 guests. We have a standalone physical SQL server that hosts the database
  and a VM Server 2008 64 bit running vCenter. I wanted to use Server 2008 R2
  for the vCenter, so I intend to install a new VM running this OS. Is it possible
  the new basis of use 4.1 existing vCenter 5.1 (I guess he needs to)
  mise_a_jour/migration) and have 3 4.1 ESXi hosts to vCenter 5.1 report? I have
  then remove the vCenter 4.1 and upgrade the hosts of 4.1 to 5.1. The
  Another option Im contemplating implements the vCenter 5.1 with a new SQL
  database.

  Also there are issues keeping the hosts at 4.1 when using
  vCenter 5.1 for a few weeks?

  Thank you!

  Is it possible to have the new vCenter 5.1 using the existing base of 4.1

  Years: This is not possible, during the upgrade to vCenter Server 4.1 to 5.1, I saw the database schema changes. Schema be compatible freshly installing vCenter server 5.1 and connects to the 4.1 database and do not support.

  A report of hosts ESXi 4.1 3 Center 5.1?

  Years: It is possible, ESXi4.1 works seamlessly with vCenter Server 5.1. Once you upgrade to vCenter server 5.1 level, all the host esx4.1 will connect to improved vCenter Server 5.1

  The other option I'm contemplating implements the vCenter 5.1 with a new SQL database.

  Years: you lose all configurations and need to connect ESX4.1 to the new host Server 5.1 and reconfiguration

  Also is there any problem keeping the hosts to 4.1 using vCenter 5.1 for a few weeks?

  Years: As mentioned above, it works and it is compatible.

• Adobe Production Premium CS5.5 installation and other issues errors

  Hello

  I have just installed CS5.5 Adobe Production Premium on my computer and had a few errors pop up at the end of the installation.  I will paste the summary below.   I tried to install Procction Premium a couple of times.  I used the Adobe cleaning tool.  What I did the research, the Flash issue is a false error given that Flash was already installed on the computer.   The rest is connected to the program as well Flash?

  Thr programs all appear to work except for the below question well.

  My other question is that when I'm in Windows Explorer and I am entitled to say a .jpg file and select open with...  I am not able to choose Adobe Photoshop or Illustrator for this question.  I have Dreamweaver CS4 and who is presented as an option.  I went through the process of trying to add the Adobe Photoshop .exe file, but it still does not work.  However, if I open Adobe Bridge, I can select Photoshop or Illustrator to open a file.  Is this related to my setup or is there something else?  I uninstall an older version of Adobe Photoshop 7.0 I've had for years, but it was prior to the installation of Production Premium CS5.  Could that have caused a problem?  I read that uninstalling an old Photoshop can cause problems like this.

  Any help would be greatly appreciated.

  Exit code: 6

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 4 (s), 2 warning (s)

  -Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} standard Adobe 2.0 2.0.0.0.

  WARNING: DF029: ARKServiceControl::StartService: standard Service not started or stopped. Current

  Status: Exit Code 0: 0 Service specific exit Code: 0 (Seq 1)

  -Payload: {2EE4F060-CEE6-4002-AA8B-91B791541767} Pixel Bender Toolkit 2.6.0.0 -.

  WARNING: DF035: file CreateAlias:Icon does not exist in C:\Program Files (x 86)

  \Adobe\Adobe utilities - CS5.5\Pixel Bender Toolkit

  2.6\windows\pb_app.icofile:\\\C:\PIXELB~1\source\winwood\Staging 0X1.7E8FC6P-

  1021rea\windows\pb_app.ico42178f80493091e8e552c84a2897e9da68fce32_32_f80493091e8e552c84a28 97e9da68fce for 2.6.lnk C:\ProgramData\Microsoft\Windows\Start Start Production Premium CS5.5\Adobe Pixel Bender Toolkit icon with target C:\Program Files (x 86) \Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\Pixel Bender Toolkit.exe (Seq 89)

  -Payload: {43A1C48E-3E50-410e-951C-E17A66BBF824} Adobe Flash Player 10 Plugin 10.0.0.0.

  ERROR: Error 1722.There is a problem with this Windows Installer package. A program running in the framework

  installation did not complete as expected. Contact your provider to support personal or package. Action

  NewCustomAction1, location: C:\Users\RYANAN~1\AppData\Local\Temp\InstallPlugin.exe, command: -.

  install the plugin - msi

  ERROR: Install payload MSI failed with the error: - 1603 Fatal error during installation.

  MSI error: 1722.There error is a problem with this Windows Installer package. A program managed

  as part of the Setup did not finish as expected. Contact your provider to support personal or package.

  Action NewCustomAction1, location: C:\Users\RYANAN~1\AppData\Local\Temp\InstallPlugin.exe,.

  control: - install the plugin - msi

  ERROR: DW050: the following payload errors were found during the installation:

  ERROR: DW050:-Adobe Flash Player 10 Plugin: installation failed

  -------------------------------------------------------------------------------------

  Post edited by: rynohose

  Yes, your installation errors seem to be false harmless errors associated with the brain dead install Flash. If the programs seem to work fine, don't worry in this regard. As much as not being only unable to open images with Photoshop from Windows Explorer, I recommend you to take this issue to the Photoshop forum.

• Dropped connections and background processes

  I like the new ability to a background process, but I would like to know what background processes are underway and how long they have been broadcast.
  
  I recently had problems with connections dropped with our databases because of a recent. The problem is associated with the network not DB related exactly, but it would be nice not to have to manually disconnect and reconnect again. When we get the error - the connection has been lost or not connected, for me, it would be logical to be reconnect automatically or "Refresh" the connection via a button. I know it's a pending issue in sqldeveloper, but I can't believe it's so hard for developers to add this feature. It's happened to all that, take 30 minutes, coding for this problem? Thank you.

  To see what background processes are running you will need to use the progression of tasks pane (view > the task progress)-this will show in the progression of tasks as well as those who filled by mistake (I think it's he who filled watch tasks - it shows certainly tempted with errors of syntax of queries).

  On reconnecting, the current 2.1.1 version is a step back from recent versions facing better, trying to reconnect automatically upon detection of an interruption of the connection. I hope that, this reconnection will be corrected in the next release, but we will have to wait and see. As you suggest, an option menu to reconnect when the first disconnects and then reconnects likely shouldn't be too hard, but I guess that the development team thinks that the manual reconnection is quite low priority because it would only save two mouse clicks on four with the existing connection right click menu - especially if they are working on the automatic reconnection of fixation.

  theFurryOne

• Airport Extreme 7,7,7 drop connection and internet high speed

  My Airport Extreme (6th generation) have had the serious problems of the internet, as said in the title I had problems with my internet connection, I checked if that was the problem of the modem to the beginning (D3.0 Ubee) which was provided by my Internet, Charter provider.

  I've had Airport Extreme for almost a year to 2 years now and since then, I had no problem with my internet until 7.7.7 update came.

  I updated my firmware and this is where my random internet connection problem started.

  My current contract with the Charter are their 60 Mbps (download speed) and 4 Mbps (download speed), during the first days since I've updated 7.7.7 connections was fine and then my internet has started to decline since a means 50-60 Mbps (download speed) to 0.1 - 2 mb/s (download speed), my download speed has remained a constant 3-4 MB/s (download speed). I have tried and used Opendns several times, he really did nothing.

  I tried to turn off both modem and Airport extreme for a couple of minutes and turn on their return, but he does nothing and just refers to an extremely slow speed.

  The only way I found to fix my problem to get my internet to 0.1 - 2 mb/s (download speed) back to its original state, I find myself to be a restore return settings on the Airport Extreme with my Airport utility by default whenever the problem returns (which contributes to a certain degree as it gets my back up to 50 internet-60 MB/s) then he drops down again).

  I wanted to restore to 7.7.6 or the latest version of previous firmware before 7.7.7 (not too sure what version of firmware, it was) but I can't find how to spend my Airport extreme to my Airport utility.

  My question is what could I do to fix this problem if the decommissioning of my extreme (I need instructions with this too), change some settings, get rid of the * thing and get a new router, or am I stuck resetting to the parameter by default whenever she acts upward.

  I use windows 10 for my laptop

  Thank you for your time

  Unfortunately, the first question that you encountered is the AirPort for Windows utility has not been updated since Windows 7. In addition, it is not supported for use with the 802.11ac latest versions of airport base stations. Then downgrade to earlier versions of the firmware for base station can be difficult, unless you can get hold of a Mac or iOS device.

  If you are ready to test Windows 10, here are the steps to do:

  • Open the AirPort for Windows utility.
  • Select the base and then station in the utility menu bar, select the access point > Download Firmware...
  • Click on the Download Version dialog box, where the current version of the firmware is listed.
  • You should now see a list of the firmware versions that are available.
  • Click on the one you want to get off at.
  • Choose either 'continue' to continue with the downgrade, OR click 'Cancel' If you decide not to do so.
  • If you choose to continue, allow the firmware to be downloaded, installed and the base station to turn.