Wondows xp USB 3.0

Similar Questions

• Personal hotspot USB modem Windows 10 & iPhone 6 s more does not.

  Hello

  I'm unable to use my personal Hotspot via USB with my iPhone 6 s more and Windows 10.

  Personal hotspot works via wifi, iTunes can recognize my device and windows Explorer.

  When I turn on personal hotspot via the usb port on my phone though, Windows network is not picking it up.

  There is no new detected internet connection.

  I think that it is a problem of driver under windows 10.

  No matter who ate any ideas on how to fix it?

  I've done several reboots of both phone and PC, plus an uninstall, reboot, reinstall iTunes

  My personal hotspot stopped working completely immediately after the 9.3.1 update on my 6s +. It does not seem to have any correlation with Wondows 10. I use my hotspot everyday for businesses, and it worked fine (though often wayward) on Windows 10 with iOS 9.3. Often it took to turn the hotspot on / off several times before that Windows recognize it. I get nothing now when I allow it. No blue banner high and certainly no link available with Windows 10. It seems that Apple has missed something again. I was curious, able to get yours you worked?

• USB drive unplugged when wake up mode 'sleep'

  I use windows vista business version for my 6400 Dell insporon laptop.

  When my laptop wakes mode ensures, in the wondows login procedure, it seems he disconnected from usb drives to not communicate with windows at this time. One of the USB (simpletech 2 TB) was not connected (it loses the drive letter in windows Explorer). Two other brand always connected.

  If I recycle the power of this USB, it connects back.

  Simple question: where can I change once and for all so that I don't have to recycle that drive usb every time when you wake up mode 'sleep' (she becomes very annoying since this USB does not start button / stop)? Personally, I think it's microsft windows 'default login procedure question' no usb drive manufacturer bug (contact usb drive tech support).

  Thanks in advance for any help.

  Hello

  The problem is perhaps due to several parameters being off, and you can actually have
  go through the list again. It could be you have a hardware problem with
  the USB port or might have to reinstall Windows. Even if it is complex you need to use this
  keep track and not as a menu.

  Another possibility is to use a clean boot to see if something in startup is at least partially
  in the mixture. It is the only method of control similar to your idea about the login procedure.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured so that it starts automatically when your system
  boots and you login. Autoruns shows you the full list of registry and file locations where
  applications can configure Auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx Rob - bicycle - Mark Twain said it is good.

• Windows 7 cannot depend on a wondows Security Center

  The Windows 6.1 upgrade (7) home premium to 10 unsuccessful Wondows. Unable to open or find Windows 7 application-failed to get the links on the Facebook Page. Unsuccessful with Google chrome (says incompatible)

  You can try the upgrade manually:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Problem of USB ports: remove the material does not work. It works on different computers for the same USB devices

  Original title: problem of USB ports:

  I have a computer dell laptop inspiron d1420 provided with Windows vista and I have upgraded to Windows 7 ultimate, I noticed that when I plug in a USB mass storage, when I try to remove it, I don't get the safe delete the message and lately when I try to remove it, I keep getting the message He's busy and I can't remove it. I tried the same USB on another PC and I have no problem at all. I connected a printer, USB cable and wondows llok have not the driver or didn't install the printer, he left as a device not specified with the name of the printer, but I can't print. I tried with another PC that is also running Windows 7 ultimate and I have no problem, windows has installed the driver, because I used the same printer and the same cable. What is the problem with my USB 4 ports and how to fix?

  Hello

  When you get this message while trying to remove a USB, it's basically a lock for this USB device by some process running on the computer. If we know which process is this locking mechanism, we could also find which Service is associated with this problem in the computer.

  To check this, you can use a program called Process Explorer. You can download this program from the following link. Once downloaded, extract the contents of the zip downloaded to a folder on your desktop. Inside this folder, you will see a file by the name of procexp , which is the executable for Process Explorer. The download link is:

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653

  First, plug the USB to one of the USB ports. Then, once you have the executable to Process Explorer, right-click on it and then click run as administrator. Please allow all guests UAC can occur. Once the Process Explorer is running, please follow these steps to search for processes using the USB at the moment:

  1. click on Searchand then click on manage to find them or DLL on the options menu at the top.

  2. then in the pop - up which will turn up next, type the drive letter for the USB drive connected to the computer (for example G: or H:) right now and click on Search.

  3. he should then display all instances of the process that is using this USB at the moment with the corresponding process ID (PID).

  Now, once you have the names of processes using the USB at this time, you can terminate them by clicking on them and then clicking on Manage close. Once this is done, you should be able to eject the USB safely.

  I would like to ask the names of processes lock the drive in your computer. This should give us an idea of what we might have to take the next.

  In addition, for the other issue that you mentioned, in which the computer does not automatically and correctly detects the printer when it is connected to the computer, I suggest you to check whether or not your computer Plug-and-Play service is set to automatic. Here's how you can do this:

  1. press the Windows and the R on your keyboard to get to the top of the run box.

  2. type Services.msc in the run box and press enter on the keyboard. Allow all UAC prompts that may coming up next.

  3. once it opens the window of the Services for you, scroll down to the Plug-and-Play service and double-click it.

  4. in the properties box that will come next, the Startup type should be set to Auto and the Status of the Service must be started. If this isn't the case, please put these values.

  5. click on apply then OK, close all windows in the computer and restart the computer once.

  Once these steps was performed, please check if the problem remains the same. We know the results.

  I hope that these steps raises you in the right direction in order to solve this problem. Don't answer if you still need assistance, we will be happy to be of assistance.

• D-Link DUB-E100 high speed USB 2.0 Fast Ethernet Adapter

  I have a problem with my LAN card when I come overseas for a business meeting. I choose not to send my new phone Samsung difficulty since it is necessary for a meeting. So, I bought this adapter for temporary. It took me an hour to make it work on my Windows 7 with WinXP driver (there is no Win 7 drivers available). I found it works well if I use only for my Microsoft Outlook, but not at all for the Web site. Most of the time I try to surf, my system crash and blue screen appear. Any people have any idea what should I do? I have to be on this thing for months and I have so much to do between this computer and my office.

  Why can't you buy something that is Wondows 7 compatible? The DUB E100 is also old

  On the site of D-Link...

  «The D-Link DUB-E100 is a Hi-Speed USB 2.0 10/100Mbps Fast Ethernet Adapter specifically designed to plug into a port Universal Serial Bus (USB) available on a computer desktop or laptop PC running Microsoft Windows XP, Me, 2000, or 98SE.»

• USB disabled after the update of the Sierra (a short circuit and a work)

  Hi, when I bought my mbp 13 inches mid2012 (used, not new) I noticed that a USB port did not work. In the Yosemite sometimes I noticed that a USB port consumed too much energy and have been disabled. (I think because the usb port has been short-circuited. Year when it was time to update the mbp to El Capitan I had a few panic the kernel and the newspaper was shown as the last driver loaded the USB driver, so I kept the mbp with Yosemite. A few days ago, I updated for Sierra but only usb which used to work stopped working. It has enabled and turned on but Finder and disk utility does not see the drive. In an Apple dealer they said that could be established relationships with some oxide and next week will take it and see what the problem is.

  If there is someone with the same problems, please tell me what to do! I don't want to put in the trash my mac just for a flash drive... but I need!

  Hi Supermene,

  Thank you for using communities of Apple Support. Based on what you said, it appears as a USB device is not recognized in one of the USB ports. There are a few things that can cause this. I recommend you read these articles, which may be able to help solve the problem.
  

  macOS Sierra: If a USB device does not work

  Reset the management system (SCM) controller on your Mac.

  See you soon.

• MacBook Pro USB Ports

  MacBook Pro my keyboard and wireless mouse work in my usb ports but I can't mount drive flash sticks? Do not display in the finder, but will be blink in disk utility then disappears?

  Flash drives show in disk utility?

  In the Finder > Preferences > sidebar > devices is verified external drives?

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• Boot Camp El Capitan Windows ISO USB key

  Install Windows 7 with a USB key that is already configured as a windows installation disc, Boot Camp did not acknowledge the presence of the USB and claimed installation media. I inserted the DVD and it started to install.

  Is it possible that the Thumb control procedure is no longer necessary or do I lucky/unlucky?

  If she doesn't have a drivers W7 Apple pre-start, it won't work.

• New Audio USB Interface lose sound on El Capitan

  Hi all!

  A few weeks ago that I upgraded my MacBook Pro retina 15 "end 2013 to El Capitan, after that my USB Audio Interfaces (Focusrite Scarlett 2i4) and Safire 6 USB stopped working properly. Both work correctly when they are connected to an iMac 5K running the same operating system.

  I can listen to Audio for some time (about 10-2 Minutes, it is always different), when the Audio starts to crush und get outs, after a certain time there is only silence "click on" come out of the speakers.

  Heres an Audio file of the sound that results from: https://www.dropbox.com/s/5nb96bmdh47kmi2/20160923%20141619.m4a?dl=0

  I already tried to reinstall OS X (starting with CMD R and reinstall OS), reset PRAM and SMC. Nothing has changed the question. Any ideas where it comes from?

  Greetings

  Chris

  It is most likely a software conflict. Note the time at which audio is running out. Open the Console and look for accidents or mistakes at this time.

  The reason why it crashes on a mac, but not the others most likely is related to differences in software installed. Run Etrecheck on touch mac and post the report here.

• Crash when disconnecting USB connected to the Steinberg UR-22

  Updated for Sierra recently.

  When I unplug my Steinberg UR-22 by the USB port, the operating system crashes instantly and restarts.  EVERY TIME.

  I plug/unplug often and have never had this problem until the Sierra.  I use my Air for labor and for the game, so he forces me to move to and from the Office to Home Office... or around the House.

  Any suggestions?

  Thank you!

  The Yamaha Steinberg USB driver only supports OS X 10.9, 10.10 and 10.11. You need to ask Steinberg support if or when they intend to support macOS Sierra 10.12.

• How to upload photos on a USB key on the mac pro book photo

  I just want to know how to download my pictures that are in the photos on my macbook pro to a USB for guard duty.

  Select them in Photos and export (menu, file == > export) in a folder on the desktop and in the finder, drag the foldr to the thumbdrive mounted, unlocked

  LN

• USB charger - 29W C - compatibility with 12.9 "iPad Pro

  I'm looking for an answer as to if the USB - C 29W charger is compatible with the iPad to 12.9 "Pro. I know this question has been asked and answered by the communities in the past, but when I went to the Apple Store to buy the charger today, the staff told me that the charger could damage my battery over time. I then started a support chat session to confirm the answer and the representative said (and I quote) "If 2 people advised me not to do something, I would not even waste my time." We could care less if you want to damage your unit. »

  First of all, I never got a rude responses to Apple, so it was a surprise. Secondly, I really just trying to get an answer to the question. Can anyone (especially Apple) help out me? Thank you!

  If it is not in the specs of the iPad, you're crazy to use it. The Chargers are cheap, the iPad is not.

  Barry

• Can I create a recovery bootable USB through disk utility?

  My HARD drive is dying, I can't access my Macintosh HD partition anymore and I can't reinstall OS because I SMART errors. Before the format and reinstall the attempt to load slow my computer, random errors, etc. So I definitely think that the HARD drive is near death. My plan is to replace my HDD for a Virgin SSD, I perform this task several times on computers of the victory but for MAC, I wonder how I will load the new OS. Can I make a bootable USB with the recovery partition, but on a USB key tools? Unofrtunately I have more available Mac to create the USB bootable through itunes.

  My computer is the MacBook Pro (13-inch mid 2010), I have also all original packaging somewhere, if there is a CD that I can use, I certainly can get too.

  Any advice?

  Thank you!

  Apple have this to do a USB installation...

  Create an installer for OS X - Apple support bootable

  Another option is to use the diskmakerx.com application

  You must have the OS installer downloaded to make these methods of work is probably not practice on your failed drive.

  Both of these options are to run a 'normal' operating system too. The recovery partition is not 'normal '.

  Another option is to use the Internet recovery mode if your Mac supports...

  Computers that can be upgraded to use OS X Internet Recovery - Apple Support

  On macOS recovery - Apple Support

  Use wired ethernet for best results, since it will download a bootable OS & then download the installer of the OS also.

  I suspect you have the update of the firmware installed to add this feature if it has been updated over the last 3 years

  You may be able to generate a score of alternative recovery to another disk (such as a USB key) If you want to just "compensation of base OS.

  OS X: on Recovery Disk Wizard - Apple Support

  A last solution would be to clone your drive failing on an external drive (or use the new SSD in a proper case). That can be done in the modes of recovery via disk utility. Basically, you use a feature to "restore" to clone one volume to another. (I don't see clear instructions for the moment so ask if you want to pursue this option).

• Connection keyboard and mouse USB Wired stall

  Hello

  My computer repeatedly interrupts the connection to my Wired USB mouse and keyboard.  Usually around one every 30 seconds, the connection falls for 1 to 1.5 seconds, then comes back.  Meanwhile, the cursor hangs - I can't click anything, and I can't press any keys on the keyboard.  For example - when I type, I have my keyboard will stop working for a while, and no text will appear.  This is particularly problematic when I play games.

  I tried to reboot the computer, reset the SMC and the mouse and keyboard.  I also tried all USB entries on my mac (4 in total), and the problem persisted with each of them.  This leads me to believe that it is either a problem with all the USB inputs, or a software problem.

  I have an iMac 27 inches, mid-2011 with OS X El Capitan 10.11.6 (specifications: 3.4 GHz Intel Core i7 processor, 16 GB with 1333 MHz DDR3 memory and storage capacity of 2 TB).

  I use a wired USB (Logitech G402) mouse and keyboard USB Wired (Razer BlackWidow Stealth).  I have the latest version of Logitech Gaming Software and Razer Synapse installed for support.

  I would appreciate help.

  Check if there are updates available driver.

  To check if the problem is with the USB to your Mac controller, test with a different keyboard or mouse.

  To check the extensions conflicts, etc., try the startup mode.

  -----

  Restart in Safe Boot mode by holding down the SHIFT key at startup. Secure boot is quite slow because the operating system performs some cleanup and verification tasks, so give it time. Once you're completely connected, restart normally.