D-Link DUB-E100 high speed USB 2.0 Fast Ethernet Adapter

Similar Questions

• High speed USB 2.0 physical location of the port

  I have a HP Pavilion dv6-3122us Notebook PC. I get messages when the transfer of files on the fastest "high speed USB 2.0 port.  My user manual tells me that I have three ports, of which one is a 2.0 port but I am unable to say which is the 2.0 port. Can anyone help me find information on the location and identification of the usb ports?

  James Worthen Sr

  I just got offline with a HP tech rep and he told me that the high-speed 2.0 port was, in fact, the eSATA/USB port.

  With this port, it gives me four ports and I wouldn't imagine that it was even a USB port, as it seems slightly different rather than the usual USB ports. I pluged my Bluetooth adapter in this port and it works fine. I have not tried to transfer files with this port again, except the photos with the bluetooth, but when I do I will seek to see if I still get the same message while transferring. I doubt I would. I believe that this issue has been resolved and I will mark it as my. Thanks to all who responded.

• Device 4 ports high speed USB 3.0 Hub useful Para PC computer

  Hola amigos

  Al enchufar el 4 ports high speed USB 3.0 Hub useful Para PC computer
  a mi PC, e me lights luz roja, pero no me works, porque me da error code 43 Windows.
  Me pide UN driver y no me lo reconoce.
  Intento find a driver there still no lo he achieved
  Alguien me can help, a packaged good
  MUCHAS gracias
  A greeting

  Hello

  You created this thread in the English version of the Microsoft Community. Please could you click on the globe icon to the world at the bottom left of the screen and then choose your preferred language. Now create your thread again.

  

  If you can't find a suitable language, please go here:

  http://support.Microsoft.com/common/international.aspx

  for other international support options.

  Thank you.

• Ports high speed USB Equium A100

  I installed a webcam Advent (before exchanging it for a better creative). Part of the installation process involves installing a Microsoft's USB controller. (OS is Windows XP Home Edition). I uninstalled the ADVENT software when I got back to the webcam.

  Since then, I started getting messages every time I plug a USB device, on a device high-speed, requiring a port high speed.

  When I look in Device Manager, I have two sets of Bus USB controllers:

  One includes 2 standard OpenHCD USB host controllers, 2 USB, 1 support 2 USB hubs and USB printing composite devices. Their drivers are dated 2001.

  The other includes 1 class PCI USB 2.0 enhanced host controller and USB Root Hub Device 1. Their drivers are dated 2006.

  I have 4 USB ports and all seem to be using the first series of USB controllers. If I disable one of the controllers, then various USB devices stop working.

  As my laptop is only 18 months old, I would have thought that all USB ports are 2.0 version?

  How can I 'forcing' the laptop to use the second set of controllers?

  Hello

  I think that the biggest problem, it is you would waste more time to fix such a driver related issue then just entering the recovery CD and performing a recovery of your entire system.

  Perhaps the fastest way to put little life back to your ports USB 2.0 high-speed. Otherwise, I had suggested to remove all ports from the Device Manager and let windows after a restart re-install all the drivers, but before perform the reboot it would be better to manually remove all THE drivers installed previously.

  Maybe it helps, but if not he would have definitely better to perform the recustomization...

  Concerning

• Message: This device can perform faster if you connect high speed USB

  Hello

  I have a laptop Toshiba Satellite 2009 of Vista.
  I just bought a multimedia design Memup Feel of the disc hard 500 GB.

  My concern is that when I connect to my PC, I have the following message:
  + This device can perform faster. USB devices can be faster if you connect to a USB 2.0 high speed +.
  + To get the list of available ports, click here. +

  Then I have a list of ports in bold, but I don't know what to do with.

  How to solve my problem?

  Thank you

  Hello

  Are you sure that your laptop is Satellite 2009?
  I put t know this model of laptop.

  But I know that this error message; This message appears if you connect a USB 2.0 device to a slower USB port; That is, USB 1.1
  But I think that your laptop supports USB 2.0 ports either TI problem disc external HARD s or the issue of USB drivers
  Try updating the chipset driver you can also delete all the USB controllers and hubs in Device Manager ports. Restart the unit. After restarting again the OS would recognize all USB ports.
  Then try to reconnect the USB HDD

• Satellite A200 - 14 d high speed USB warning

  Hi, guys :)

  For a few months, I have this warning message...
  I looked in a lot of forums, but found answers very very different each time :( Hope you can help me.

  I usually only 1 USB mouse connected to my laptop (with Windows XP Pro SP3).
  The mouse is some Logitech thingie high-speed - nothing special.
  So my WinXP gives me regularly (3-4 and several times a day), a warning about HI-SPEED USB device attached to non-HI-SPEED Hub.
  There is a list in the window of warning with 8 ports.

  -> Intel (R) 82801G (ICH7 Family) USB2 Enchanced Host Controller - 27CC
  --->(8 ports) USB root hub
  ---> Unused port
  ---> Unused port
  ---> Unused port
  ---> Unused port
  ---> Unused port
  ---> Unused port
  ---> Unused port
  ---> Unused port

  There is a recommendation below that says:
  Unplug the device USB Composite from its current port and then connect it to one of the ports on a hub are bolded.

  I looked in the Device Manager Windows in Universal Serial Bus controllers- section.
  Here is a list of what's inside:

  ---> Intel (R) 82801G (ICH7 Family) USB Host Controller - 27 8 Enchanced
  ---> Intel (R) 82801G (ICH7 Family) USB Host Controller - 9 27 Enchanced
  ---> Intel (R) 82801G (ICH7 Family) USB Host Controller - 27CA Enchanced
  ---> Intel (R) 82801G (ICH7 Family) USB Enchanced Host Controller - 27CB
  ---> Intel (R) 82801G (ICH7 Family) USB2 Enchanced Host Controller - 27CC
  ---> Composite USB device
  ---> USB hub root
  ---> USB hub root
  ---> USB hub root
  ---> USB hub root
  ---> USB hub root

  I have 4 USB ports (2 on each side of the laptop) and an integrated which is used by the WebCam integrated (think about the last concentrator Rood was the Cam, for when I turn it off, camera stops working and when I enable it again, Windows says, that it has detected a new hardware Chicony USB 2.0 Camera).

  What should I do?
  Let the fact that this warning for HI-SPEED USB is very very boring...
  There might be a hardware problem :( I noticed that controllers host Enchanced USB Intel (r) 82801G deactivation does nothing...
  Everything works as usual.
  For example if I disable the Third USB Hub of Rood, my USB mouse stops working (obviously for the USB port where my summer mouse attached to). But with Intel controllers - nothing.
  How can I use them? What drivers? If this is the case, where can I find new?
  Toshiba obviously do not support its laptops with Windows XP installed on them :(

  Thank you in advance!
  rbaleksandar

  I agree with Akuma. Try uninstalling the USB drivers and if you have installed the drivers for the mouse, remove them and try again.

  In addition, I would try to update the chipset drivers and BIOS. The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In the worst case, you must reinstall the laptop with the Toshiba recovery disc.

  On the other hand, you have this problem with other USB devices? Maybe it s not a problem of the laptop.

• USB 3.0 connecting high-speed USB 2.0 drive

  I have a Western Digital 1 TB USB 3.0 external hard drive. I connect it to the USB 3.0 port (blue) on my laptop Acer Aspire 5755-6647, who works under Windows 7 x 64.

  When you connect, I get the "this device can perform faster: this USB mass storage device can transfer information faster if you connect it to a Super Speed USB 3.0 port" message. When you copy files to the drive, I get about 32 MB/s, which corresponds to a USB 2.0 speed.

  I tried to disable the USB power management in the utility USB 3.0 host controller. I tried to uninstall the device and put it back. I'm using the cable supplied with the disc and is a USB 3.0 cable. I have the latest Renesas USB 3.0 driver installed (2.0.34.0). I also tried to use an older driver from Renesas. My BIOS is updated (P5WE0121).

  I don't know what else to do. If it helps, the first time I have connected my laptop hard drive, it's on a USB 2.0 port (I had for some reason any remembered which side of the laptop had the port 3.0 and does not check for blue). As I have said, however, I completely uninstalled the device. I suspect that Windows can be "remember" the device and install with the 2.0 driver.

  Update: I finally try one last thing before you go to Acer support. I thought that perhaps not enough power provided by my USB 3.0 port on the drive, forcing him to 'downgrade' 2.0. So I bought a cable to Yfor $5 to offer auxiliary power of the adjacent 2.0 port. Result: IT WORKS. Immediately connected as a USB 3.0 peripheral speed and transfer is USB 3.0.

  Solved. A little disappointed with the Acer/Intel for the USB 3.0 under normal, however.

• Can I get my satellite Pro 2100 high-speed USB 2.0?

  I have a new MP3 Jukebox that can operate at USB 2.0. Do anything to get my Satellite Pro 2100 to work at speed 2.0 that it currently only works with USB 1.1? Sorry, but I'm not very technical.
  Hope someone can advise me
  See you soon
  Bob

  Hi Bob

  The best solution for you is to buy a PCMCIA USB 2.0 card. As far as I know there are cards with two or four USB ports. This card is not expensive and the installation is not complicated.

• Host controller high-speed USB 2 for Satellite 1110

  I have improved my Z15 Satellite 1110 XP home to XP Pro. I feel that I have 2 USB ports on my laptop. Problem that I face is that when I connect a USB 2 device, it can not find host controllers and operate at 1.1 speed.

  I read maybe it's a problem with the motherboard drivers, is there anything I can download to fix this problem?

  Hello

  If I remember your unit has three USB ports and they are definitely 1.1. There is no way to make them faster. One solution is to use the USB 2.0 PCMCIA card.

  It is not some kind of anomaly or problem and there is no way to fix it.

• USB port high speed - not available on Tecra M1

  Hi all
  I joined my new external HARD drive to my Tecra M1 and XP says I use * not *; port USB high speed.
  Question: How can I switch to high speed USB port?

  Driver: Intel 82801DB/DBM USB 2.0 Hostcontroller - 24 D of Microsoft Version 6.1.2600.0 issued 1.6.2002

  Thanks for the reply in advance.

  See you soon,.
  Tom

  First of all, you can't 'upgrade' your internal USB port to a Highspeed USB port. This is NOT possible, but your machine must have at least 2! ports USB 2.0 capable.

  I suggest you do the following: download the latest drivers for your machine on Toshiba Driver download site, install and check if the error message appears, anywhere you´re attaching your USB 2.0 device.

  Usually one or 2 of these ports should be able to USB 2.0.

  If still, you get the same error message then come back and give some comments, then we can discuss more about.

  See you soon

• Wall charger USB high speed will work with Sansa Fuze?

  Salvation;  I think to buy a double wall on Amazon USB charger new Trent, 10W 5V/2 has two ports high-speed USB AC wall charger (IMP90C) http://www.amazon.com/Trent-Dual-high-speed-charger-IMP90C/dp/B009RXU59C/ref=cm_cr_pr_pb_t

  Characteristics of the product

  • 2.1 wall charger high-speed USB AC 10W amp load.
  • Two USB outputs to charge two devices at the same time.
  • Quickly recharge all your devices USB 5V from a wall outlet
  • Ultra Compact.
  • Overload and short circuit protection

  Product description

  New Trent, wall charger USB double IMP90C
  IMP90C is a secure and high speed charger double USB AC wall charger new Trent. This compact and lightweight charger is compatible with all smart mobile / cell phone on the market with the other compatible similar 5V devices USB rechargeable and a replacement of your OEM charger. Just plug the IMP90C into a wall outlet to US and charge your devices (two devices at the same time that maximum output 2A).

  Compatible with numerous Smartphone/Tablet PC
  -Apple: (4th gen) iPad with Retina, The New iPad screen (3rd generation) / iPad2/iPad/iPhone 4S 5/iPhone / iPhone 4 / iPhone 3Gs / iPod Touch/Classic/Nano
  -Samsung Galaxy Note /Galaxy S2 / phones Galaxy Nexus/all the other Samsung cell
  -HTC Evo Shift 4 G/Incredible feeling/S XL /Thunderbolt / 3D EVO / EVO 4 G / all other Samsung cell phones.
  -Motorola Razr/Atrix / Bionic / the other Motorola Droid X cell, phones X 2 / triumph/All
  -Nokia N900 Lumia / C6 / C3 C7 / E7 / X 6 / N8 / N97 / all the other Motorola cell phones
  -Blackberry Playbook / Tour / Storm 2/curve/Bold/all other cells of Blackberry phones
  -LG Optimus / Quantum / Vortex / all the other cell phones
  -The car charger is also compatible with most tablets 5V which includes the new iPad / iPad 2, Nook color, Nexus 7, etc... and portable game consoles such as Nintendo DSi/3Ds/XL, Sony PSP/PSvita etc. Maybe need a cable or special adapter for some devices: please contact iDealpoint for more details

  Plug
  -Two USB ports
  -Universal 100V - 240V compatible

  My main questions are: would it work with my rocket or it's turn off too much power?  It would hurt my rocket?  This looks like a nice charger.  Any help would be appeciated.  Thank you!

  Thank you;  I just did a live chat with Sansa and they have also confirmed that this charger should work perfectly with the Sansa Fuze.  He received 159 very good reviews on Amazon, all the 4 and 5 stars.  I can't wait to order.    http://www.Amazon.com/Trent-dual-high-speed-charger-IMP90C/DP/B009RXU59C/ref=cm_cr_pr_pb_t

• WiFi unstable and slow Internet high speed

  Hello world:

  Recently, I am facing a problem of unstable wifi, slow speed of the internet of my macbook pro. I hope someone could help me with my problem.

  
  

  Symptom:

  Internet mainly speed just unstable using a wifi connection. (no problem with wifi connection self and my wifi suddenly grave would not be)

  Example:

  • FaceTime with my friends and the connection would suddenly abandon or images & audio gets fuzzy.
  • Videos in online streaming and suddenly occurs buffering.
  • Download file of software update iPhone via iTunes, the speed is slow, he needed to take 2 h at the end and later on a window display "cannot download and check your internet connection".
  • Suddenly cannot open websites like site apple.com, google.com. Sometimes it will take more time to open Web sites.

  Hardware and software:

  MacBook Pro mid-2009, OS X EL Capitan 10.11.5

  ISP: Cox, 50Mbps

  Modem & router: Netgear N450

  Test:

  Turn off my wifi and connect my macbook pro with modem & router with cable, internet high speed is stable and fast. Internet speed download speed test result display is of around 60Mbps, download speed is around 8Mbps. And I tried streaming using the connection cable, there was no buffering.

  I already tried the possible Solutions:

  • Restart the Macbook pro and restart Modem & router: will not work. I mean the internet will be very well at first, but later would be unstable again.
  • Reset Wireless Modem & router and change channels: useful, but not completely solve the problem. After you change the wireless channel, I tested my internet speed and the result showing 20-40Mbps (slower than 60mbps) speed download. Sometimes, the result will be like 6-8Mbps and sometimes it will be 60Mbps. If its unstable.
  • Wireless diagnosis: result indicates connection is good.
  • Called my ISP provider: they checked and said all right.

  
  

  Other Questions & details:

  • The internet is ok for most of the time. But when all of a sudden I can't open site or I can't download and streaming & FaceTime at normal speed, his frustration.
  • I thought it might be related to my hardware since its an old macbook pro. I can't run Apple hardware test because I don't have the installation disc more and my macbook pro is very old. Is it a third party software that can perform the test hardware on mac?
  • My wifi used to be very stable and I don't have to worry. Just for these last two weeks.

  
  

  
  

  I really appreciate your time and help! Looking forward to any reply!

  Wi - FI connection drops

  Connection Wi - Fi in OS X Yosemite problems

  Wi - Fi in OS X Yosemite connection problems (2)

  Connection Wi - Fi in OS X Yosemite problems (3)

  WiFi potential temporary fix - Yosemite

  Also try turning off Bluetooth.

  WIFI AND BLUETOOTH FINALLY SOLVED, NOT REALLY - YOSEMITE 10.10

  If your Wi - Fi source is capable of generating a 5 GHz Wi - Fi network, try that in order to avoid conflicts with Bluetooth.

• Spectrum X 360 13: adapter usb to fast ethernet for X 360

  My spectrum X 360 comes with a USB fast ethernet adapter manufactured by Asix. Type AS88772A.

  When I use it on another computer, it installs and works fine. But on the spectrum: not a beep. I tried to remove the drivers, reinstall the adapter with the drivers directly from the manufacturer (HP does not provide any driver on his site), threatening even the stupid thing, but no go. There is a recovery partition to win 8.1

  Anyone know this problem and maybe even have a solution? Thnx.

  Rob.

  The problem has been resolved.
  I did a full restore from the recovery partition and I upgraded to win 10. It works fine now. I couldn't not to identify the cause.
  Rob

• Working with USB high speed Interface Modul 2.7 in LabVIEW

  Hello

  is there an example works with a USB high speed Interface Modul 2.7 in LabVIEW?

  The EGG is a "Cypress CY7C68013A-56PVXC»

  Thank you

  Best regards, patrick

  Hi patrick,

  I searched on google for the module. The manufacturer is Braintechnology.
  If you need a LabVIEW driver ask them please, maybe it's that they can provide you with a.

  Braintechnology offers a DLL - USB. With a little work, you can include this dll in your LabVIEW project (call library function node).

  The following documents explain how to:

  Integration of external Code with the Shared Library Import Wizard (requires a corresponding header dll)
  http://zone.NI.com/DevZone/CDA/tut/p/ID/2818

  Writing Win32 dynamic link (dll) libraries and qualifying of LabVIEW
  http://zone.NI.com/DevZone/CDA/tut/p/ID/4877

  Example: Passing a variety of Data Types in the DLL for LabVIEW
  http://zone.NI.com/DevZone/CDA/EPD/p/ID/1288

  Kind regards
  N. Ralf
  NIG.

• is it possible to install USB HIGH SPEED HOST CONTROLLER DRIVER to ONE OF MY USB PORTS to RUN MY CAM AND webcam

  I have Dell Optiplex gx 150 intel pentium 111. Windows xp pro service pack 3. I get a baloon saying there is no port high flow installed on my pc, now I need material or the right drivers to make it work properly. ICAN get my cam digital to work, but I get the ball, saying that I have to install the drivers of controllers host high speed to do my camera to work faster. Now the webcam does not light but I do not get a pic and it gets the same ball to get a host controller driver high speed to make it work right. So I need a piece of hardware or just the drivers on my very old but the pc work great. Please try to answer this question in advance.

  Hello

  You can update the drivers for this chipset. Contact the manufacturer of the computer and check.
  Also, check the link below:
  Support USB 2.0 in Windows XP: finally high speed
  http://www.Microsoft.com/windowsxp/using/networking/learnmore/jones_02august05.mspx

  I hope this helps.