Work doean can't Sansa Clip after crash

Similar Questions

• Stereo does not read the Sansa Clip after firmware update

  Hello

  I upgraded to the last 2.01.35a of the previous 32.

  Before that, my channel stereo would connect to the Clip and play songs using the USB connection, I can use the remote to change songs, now with the new update of the firmware it does not read the content of the Clip.  Clip said 'Connected', but the stereo repeat me 'Reading' forever.

  I came back to the previous version and it works again.

  Is there a problem with the latest version of the firmware?

  Also, since I was in Europe, Updater I updated the European version and this limited the volume a LOT.  So I downloaded the US version is now at normal volume.  The European version is too quiet and I can't hear a thing if there is a background noise. But still, the USB connection in the stereo works with version 2.01.32 and not 2.01.35.

  any ideas?

  Thank you.

  one.

  Hello

  I tried AutoDetect, MTP and MSC and none worked.

  Now everything works well again, and I will consider the reset factory settings to change the region for other times.

  Thank you.

• Sansa Clip: Loading screen saver: can manually enable us to extend the life of the screen?

  What charge the Sansa Clip: after an hour, the screen turns white (a screen saver, I guess).

  I would like to activate the screen saver immediately, to extend the duration of the display.  Is it possible to do?

  Or maybe in a version of firmware future, so a sequence button turn it on.

  Unless the life of the screen is much longer than the lifetime of the unit in general...

  Thanks for your time.

  As far as I know, you can't do it manually now.

  This is the reason why some people with an adapter for recharging: when charging via AC, the display shuts off after setting the time of the backlight of your display.

  Indeed, even if it bugs some of us, it is likely that display time of 1 hour during USB charging will not significantly affect the ultimate lifecycle of the screen, in the end; If I remember correctly, the screen has a life expectancy of 5000 hours or something like that (sorry, it's been a while) - it is 208 days of fulltime show all day/night long.  By the time you reach this point, probably, if ever, the battery life may have been reached, or you probably may have gone to another player, as technology improves over time.  But it's all unique to each user (if you are more rare than the user who guard 8 hours per day, life of the screen display will be reached about 1.7 years; if you use your player lot every day and are charging every day, charging via AC could save you 365 hours of projection of the time per year (, the equivalent of almost a month of 1.7 years screen time), and so you can recharge via AC just to cover as much as possible.  (More realistic, if your screen is on for 2 hours a day, which is still a lot, unless you really keep your screen on a lot, the screen should last for about 7 years or more - think where you will be and what technology you are using maybe at this time.)

• How can I me floor device works with my sansa clip zip 4 GB mp3 player?

  Device stage seems to be a nice software to sync music from computer to my new mp3 player, but it doesn't seem to be in my new Windows 7 software? What should I download it?

  Or what I need to download (also) on the Sansa Clip Zip?

  Help please..!

  Thank you

  / Leif

  Read here.

  See you soon,.

  Jerry

• My Sansa Clip does not work

  I use my Sansa Clip when I work at the YMCA. I used it last night and it worked fine then. This morning when I went to the O, it didn't work at all. Once I got home, I plugged into my computer. It still does not work. Why it does not work and I can fix it?

  How about a magic Sansa?

  Slide the switch to position IT and hold it there for 10-15 seconds.  If you have sensitive headphones, you can hear a "click" soft as the device resets.  It is the function of soft reset .  Your Clip should restart normally after the reset.  Try to turn it on as usual.

  µsansa

• Sansa Clip + crashes

  Hello!

  for some time, I have a 8 GB Sansa Clip + - and I've always been very happy and very pleased with it.

  Yesterday I received news MP3-songs of a friend of mine (music of his group - so nothing illegal). Listened on my laptop - all right.

  So I copied them on my clip, disconnected from the laptop, expected that the database has been updated to a new folder (void) and I wanted to hear new music. The time was the first time I tried, the Sansa logo came, and after a while the setting menu appeared. Then I tried another time, the screen starts to move in the list of music to the play screen (the one with the title of the music and the break...) but the clip got stuck. I can see now on the left half in part list in this folder and on the right half partially the game screen. And that's it: the clip is dead. I can rely on what I want, but nothing happens. I can connect to the laptop, but he doesn't realize the clip. The only thing I can do to wait ist until the battery is empty, and then the player is running again. But only with all the old music (and a few other new music I copied yesterday). As soon as I go to the new folder with music from my friend, I have the same chrash again.

  So I deleted the folder. Make one folder somewhere else and copied the songs to there - same effect

  So I used the Sansa updater - new firmware - same effect...

  .. but as I said - the music on my laptop works perferctly. The only difference I've found (but I don't compared with some old songs) on the new bit of archive is not defined - but I can't test that now I have to wait until the battery is empty for access to my video again...

  Updated - reset funtion works, makes it easier... on the clip, the bit of archive have been set for a reason - but still I put on the laptop and copied their new. No effect.

  After the first error (where the logo appears and after awhile the settings menu) then I can see very short "update database" - I thought that the problem could be here - mtable.sys deleted, disconnected, database has been updated again - always the same s *.

  Someone has an idea of what's going on here?

  see you soon,

  Luis

  The ID3 tags on these new songs are either missing or f'd up.

• New Sansa Clip + turns off after a few minutes of play audiobook...

  Hello

  I was wondering if someone could help me.  Have been enjoying my new Sansa Clip + for the past two weeks.  Just been using the function of radio - finally understood how to load an audio cd on the drive.  The drive is recognized on my computer, and audio tracks are in the player very well.  When I start the audio book, the player will stop after about three minutes of play.  I need to do a soft reset before it turns on again.  This happens whenever I try to read the audio book.  I have not loaded all of the songs on the player at the moment and I was wondering if this problem was something I got wrong, or if I was just a faulty drive.  This is my first mp3 player, so I'm new to this. :-)  The radio and the pre-loaded songs work fine.  I contacted the customer service, but have had no response.  Thought I would try the forum before you give them a call.

  I hope someone can help,

  El

  You must use a ripping software and extract the mp3 or wma files. The Clip + probably does not even support .wav files.

• Sansa Clip + got wet, only volume buttons do not work, the volume on a PC?

  Hi my Sansa Clip + has been for some time on the rain and I guess that wet - volume keys do not work, all other functions OK

  TI now on "too lo wvolume" I solved it before that.

  1. is it possible to adjust my volume (now its too low after reset) on a PC connected via USB? Kind of hack volume...

  2. it should not happen, but I try send a guarantee? Maybe the wet sensors are OK cause it was just a rain...

  Any other probability/cost to fix in any fix Center "e"?

  Thank you!

  First of all, NEVER try to turn on or turn on an electronic device while it is still wet!

  You will very probably short something internally that will kill him forever!

  1 n °

  2. the warranty is for MFG. any defect of manufacture or material only! It does not include misuse of customer, as leaving in the rain, take it into the shower with you, a fall in the toilet, he swims, wear or leave it in your pocket and then do your laundry.

  2. SanDisk has not not any Center electronic "fix."

  The only thing you can do is to place the device in a bag of uncooked rice dry several days absorb moisture inside.  Since you've already played with wet it is doubtful that this will help, but it won't hurt to try.

• Sansa Clip barely working

  My Sansa Clip works more yesterday, I don't think it was even after connecting it to my PC. The problems:

  • When I try to play music, it starts in mode 'break '. Won't even play when I 'force' in playback mode
  • slow start and stop times
  • I can connect to my PC, but the only display of file is DevIcon.fil (182 612 bytes)

  Can't use it and I have no ideas left. It is completely charged, about 40% used space, the firmware version is 02.01.32F.

  On your Clip, try the settings-> Format.  Note that any music currently thereon is erased.

• Work of the trouble on Sansa Clip Zip

  Hi - I have problems with the work on my Sansa Clip Zip.  Work does not show for each song.  For songs ripped in the Zune software will show the work.  However, for the ripped songs in iTunes does not show the work.  I tried to put .jpg files in the folders with the songs, make sure they are of size less than 100 KB and even tried to resize one at 200 x 200 pixels (though the size was too large of pizels overall size was fine).  Any ideas?  Thank you.

  Use 'album art.jpg' (without the quotes and with space, not a line of underscore) or "folder.jpg" (again, without the quotes).

  I'm not 100% sure, but I think .m4a files Apple 'protected '. The Zip will not play them. They would need to be converted to a type of file supported as .aac (Apple DRM-free format) or .mp3 (universal format).

  You can use MP3Tag above (free to download) software to incorporate images of cover art in the "extended" part tag. Note that you need to do this for each (long) file rather than the image one (album art.jpg) for all files in the folder even the opposite effect.

• Sansa Clip + Player ignores the titles with sound of frying after the last firmware update

  Hello

  My Sansa Clip + tracks audio playback stopped (same mp3 files it used to always play) after I updated to firmware 1.02.18A.

  The player jumps just all tracks with sound of frying one after the other.  No longer play.

  What's wrong??

  Is it possible to fix it?

  Is it possible to revert to the original firmware version 1.02.15 that worked well?

  Well,.

  I don't know what the problem actually was, but certainly it's associated BONE.
  I'm at home in my Windows 7 and everything works perfectly now.

  The problem I experienced was at work, where I have Windows XP SP3 OS.

  On Windows 7 home, I copy the MP3 files in MSC mode and don't play them no problem at all.

  Driver to work on Windows XP may be defective or unsuitable for copy files correctly on the drive using the MSC mode.

  I do not know. At least, everything works fine now.

  P.S. The funniest is that tech support lady told me that my drive is ruined and it is absolutely impossible to fix.

  She also said that it is impossible to install the previous version of firmware absolutelly and that it not there no previous version of the firmware available more she also said that the only way to "solve" the problem is for me to buy a new player

  Everything just great!

  Every1 thanks for your help.

• Being probably really stupid, but I can not get my Playlists on my Sansa Clip

  Hello!

  You just bought a Sansa Clip 8 GB for the United Kingdom and I'm very happy with it - many of my CD then tried to get smart (?) transferred by creating a playlist, put a few songs in there and synhcing to the top with Clip - no joy!  The read-only list that I see on the Clip is "GoList" and the only way I can add songs to the one on the camera itself - not ideal but doable.

  Have updated the firmware on the clip to the latest version with no improvement - can't seem to curb any personal playlists - I even tried to create a playlist called 'GoList' to see if ir would crush the GoList playlist on the clip.  There can be no.

  I use the clip with Windows Xp Home Edition (SP3) which has WMP 11.0.5721.5260 and have the unit as automatic detection modes MSC and MTP mode did not work (the computer does not recognize the device)... I think that mode MSC, PlayLists don't synch?

  Any help / advice would be appreciated gratefully.

  Jim.

  Glasgow, Scotland, UK

  Thank you very much - now that I know that playlists are not supposed to synchronize in MSC mode, I'll invest my energy to get the mode MTP to work... just thought I was missing something really obvious.  In terms of achievement of the MTP mode work there are loads of articles and advice in this forum and elsewhere on that - I probably need a update driver MTP or need a better version/reinstall WinXP HE or something like.

  As I am totally new to the unit - and digital music in general (been in the dark ages too long!) I really did not know what, if anything I was doing wrong.  Your answer really helped (and it is not indicated in the user manual or the docs supplied with the device) once again, thanks a lot.

  Jim.

• You can import a clip AE for first without going through After effects itself?

  You can import a clip AE for first without going through After effects itself? Or do I need to export the clip of Ae. and if I do I lose quality viable? I want to so other people working on my project, but they have that first.

  Thank you

  By their very nature, the "les «clips» clips" EI means that they have been exported.  So, according to their file format, they can be importable in PR. Lossless codecs are guaranteed to ensure no loss of quality when importing.

  If you mean an Ae composition, the dynamic link requires an installed version of Ae.  There is no loss of quality in a dynamic link.

• Can not record songs on a Sansa Clip +.

  I recently bought the Sansa Clip + and it has firmware version V01.01.05F and the song rate feature doesn't seem to work. I choose 1-5 stars and select the choice, but the note is not saved. Another poster asked a similar question and its solution involved affecting USB MTP mode, but this has not worked for me. Any suggestions?

  Thank you

  OK I thought about it, the new firmware fixed this problem for me.

• How can I download my podcasts from itunes to my sansa clip

  How can I sync my podcasts from itunes to my sansa clip

  Hi PEYTON.

  Try these steps and check the result.
  a. connect your Sansa clip to the USB port on your computer.
  b. open your iTunes program. If your Sansa clip is not iTunes compatible, it will not sync with iTunes and it will not be displayed as a device on the iTunes program.
  c. on your iTunes program click the podcast icon to show the files you want to download to your Sansa clip.
  d. right click on the first file, and then click view in the Solution Explorer window. This will open the folder that contains all of the iTunes podcasts.
  e. copy all the podcasts and load Sansa clip by opening his drive in Windows Explorer.

  For further assistance, we recommend posting your query to iTunes Forums.

  Visit our Microsoft answers feedback Forum and let us know what you think.