worker for JTFLINS.sql could not all maintaining multilingual tables
HelloI install a new language pack for R12.1.2, dB 11.2.0.1) already 4 lanuages installed (English, German, Dutch, Spanish)
While mainataining tables multilingual
worker does not work for JTFLINS.sql
contents of the log file are
sqlplus -s APPS/***** @/u03/oracle/MST/apps/apps_st/appl/jtf/12.0.0/sql/JTFNLINS.sql
Connected.
PL/SQL procedure successfully completed.
MESG
--------------------------------------------------------------------------------
LANGUAGE=AMERICAN
PACKAGE=JTF_UM_APPROVALS_PKG
SQLERRM=ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: Oracle Text error:
DRG-11422: linguistic initialization failed
DRG-11446: supplied knowledge base file /u03/oracle/MST/db/tech_st/11.2.0/ctx/da
ta/enlx/droldUS.dat not installed
select to_date('ERROR')
*
ERROR at line 1:
ORA-01858: a non-numeric character was found where a numeric was expected
Hello
Have you completed all the steps according to the (Oracle Applications NLS Release Notes, version 12.1 [788053.1 ID])?
Please see if (Adworkers fail using Adadmin "maintain multilingual tables" task [390280.1 ID]) applies. If the document does not help, I would say that you connect a SR.
Thank you
Hussein
Tags: Oracle Applications
Similar Questions
-
HP 15-r017tu: could not all updates by cancelling changes
The other night when I stopped my laptop it says he was 160 updates, so I let it go. Then when I turned on my laptop today he said that loading updates. It takes about 30% and now it says that we could not all updates, undo changes do not shut down the computer. It has been like this for 6 hours and I need to use my laptop for uni
can someone tell me please how to fix this problem without losing all my work together from my laptop
Hello
Either the hard disk must be at fault or OS for corrupt or maybe it's just a few updates of Windows at the origin of the problem.
You can do a system restore to a well known state previously.
See the section "restoring your computer when Windows cannot start normally" here - http://support.hp.com/us-en/document/c03327545
But first do a complete hard drive - fast and wide test first from the BIOS:
http://support.HP.com/us-en/document/c03467259
You have the support of recovery with you?
If the HARD drive has FAILED, you must replace it.
If the HARD drive had failed, I suggest that you change the automatic update of Windows from the control panel to "Automatically check for updates but let you choose to download and install them or Not" next time after you do a restore. Be sure to restore to a point at least 48 hours before the problem started.
http://www.eightforums.com/tutorials/5794-Windows-Update-automatic-updating-turn-off-Windows-8-a.htm...
Maybe some update is the cause of the problem.
Next: run a scan of the file system - Option 2 in this tutorial:
http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html
Restart the system.
Then, run the commands dism, account required to Option 1 in this tutorial:
http://www.eightforums.com/tutorials/26512-DISM-fixing-component-store-corruption-Windows-8-a.html
Restart the system.
Now, you manually install the update to Windows I'm matches of 5 instead of as a whole.
Restart the system after each batch installs.
Note: Completely disable/uninstall all Antivirus software from your system all the while.
Concerning
Visruth -
original title: MEDIA CENTER SETUP ERROR: Configuration settings for your region could not be determined
windows vista operating
Media Center worked then xbox 360 could no longer find videos. I can not run the Setup program for media center because of this message:
The configuration settings for your region could not be determined. Restart your computer to solve.
Things I've done:
restarted computer several times
run system restore
disabled the norton 360 firewall settings
has ran norton pc tune up
still can't media center to work Please HELP
Thank you
Hello
The problem may occur if the Windows Media Center components are not registered correctly.
I suggest to try the following steps to solve the problem.
The registry Windows Media Center components
=========================
1. click on start-> all programs-> Accessories, right-click command prompt and click Run as administrator.
2 type the following commands, press ENTER after each line.
REGSVR32 ATL. DLL
CD C:\WINDOWS\EHOME
EHSCHED /UNREGSERVER
EHSCHED/SERVICE
EHRECVR /UNREGSERVER
EHRECVR/SERVICE
EHREC. /UNREGSERVER EXE
EHREC. EXE/REGSERVER
EHMSAS. /UNREGSERVER EXE
EHMSAS. EXE/REGSERVER
We can open Windows Media Center now?
It will be useful.
-
"We could not all updates. Undo changes. Do not put your computer. »
Hello. So about five hours ago my laptop rebooted Windows 8 automatically do an update.
Everything was fine and when it got to 100% it restarted again and does the same thing, but after that he came with "we could not all updates. Undo changes. Do not turn off your computer. »
I probably read each article on the same problem that others have had with this and they all say the same thing.
I tried to get my advanced options, but it doesn't do anything that it just goes back to the same message.
I know what he does not say so, but I turned my computer off and waited a few seconds before turning on again, but still nothing.
Can someone help me please? :/
Hello
Thanks for posting your query on the Microsoft Community.
Thank you for details on the issue and we will help solve you this problem.
I suggest you try the methods and check them off below if it helps:
Method 1:
Please see the following Microsoft article and try the troubleshooting steps.
https://support.Microsoft.com/en-us/KB/2700567/en-us
Note: Do not attempt the steps to update your PC.
If the problem persists then follow the method below.
Method 2:
I suggest you to refer to the following Microsoft article and perform troubleshooting.
http://support.Microsoft.com/kb/949358/en-us
Note: Please see: how to reset the computer to start as usual after troubleshooting by clean boot of Kb to start the computer in normal startup after's article have solved the problem.
Hope this information is useful. Let us know if you need more help, we will be happy to help you.
Thank you.
-
He said: "there is a problem with this installation package. a program required for this installation could not be completed, contact your provider of batch
original title: itunes is not installed.Hello
Did you change your computer?
Method 1:
I suggest you to see the links and check.
Problem installing iTunes or QuickTime for Windows
http://support.Apple.com/kb/HT1926
See also:
Solve problems with programs that cannot be installed or uninstalled http://support.microsoft.com/mats/Program_Install_and_Uninstall
How to solve problems when you install or uninstall programs on a Windows computer
http://support.Microsoft.com/kb/2438651
I also suggest you to contact the Apple support and check.
-
Experaince Index Windows for my sytem could not be calculated.
Mr President.
Please delete my problem as indicated below:"Experaince Index Windows for my sytem could not be calculated. Could not measure the performance of storage. Error: unable to evaluate the drive.
The parameter is incorrect. Let me know the solution to my problem explained above in the subject of this message. »Thanking you,
Yours Sincerely,
R.ThandapaniPlease delete my problem as indicated below:
"Experaince Index Windows for my sytem could not be calculated. Could not measure the performance of storage. Error: unable to evaluate the drive.
The parameter is incorrect. Let me know the solution to my problem explained above in the subject of this message. »
Given the message is something in this sense:
Index of Windows performance for your system cannot be calculated.
Could not measure the performance of storage.
Error: Cannot properly assess the disc.
The parameter is incorrect.Do you use ReadyBoost (a USB drive connected to 'boost' performance)? If so, unplug it.
You have symbolic links to other locations on the system? Check your TMP and TEMP environment variables to point to the REAL locations - not through any symbolic link.
Make sure that the space is sufficient on the drive in question, as well.
At the end of the day - I suggest you skip this "assessment" of your system and not run again. ;-)
-
I have can´t initialize photoshop for this reason could not load actions because an unexpected end of file was encountered. "Could not initialize Photoshop because the preferences file was invalid (removed)" How can I solve this problem?
I have a MacBook Pro.
App - Adobe Creative suite 5.5
The only application that initialize does´t is photoshop
Solve the problem
FAQ: How to reset my preferences?
Thank you Jeffrey Tranberry
-
ADFDI-05577: could not retrieve the data table on the server.
Dear all,
My use case is, when I opened my excellent work book, I have this error message is out ' ADFDI-05577: could not retrieve the data table on the server line "and when I click on the button 'OK' of the error message I can recover all the data on the server. Please help me how to solve this error?
Concerning
KTThanks much Sireesha Pinninti, John Stegeman, Arun.
Yes, my problem is of subquery. I found a solution from this site.
http://www.DBA-Oracle.com/t_ora_01427_single_row_subquery_returns_more_than_one_row.htm,
http://srinisboulevard.blogspot.com/2010/04/ora-01427-single-row-subquery-returns.html
http://StackOverflow.com/questions/3804850/erroneous-ora-01427-single-row-subquery-returns-more-than-one-row / / the answer is the last lineBefore change (error subquery)
CheckingEO.BO,
(SELECT ntr_no FROM test
WHERE cs_no = CheckingEO.CS_NO) NTR_NO
To archive the CheckingEOEdit it like this
(SELECT ntr_no FROM test
WHERE cs_no = CheckingEO.CS_NO and Rownum = 1) NTR_NO
To archive the CheckingEOConcerning
KTPublished by: KT on 23 May 2012 15:35
Published by: KT on 23 May 2012 15:48
-
I have a HP Pavilion Elite e9180t PC comes with Vista Home Premium 64-bit. I had the hard drive (Seagate/Barracuda 7200, 750GB) SATA to go over me (after the expiration of the warranty of course) so I replaced it with a WD Caviar Green 1 TB drive. When I rebooted the news of recovery disk to the new disk, VIsta worked but Windows Update does not work and I get A 8024, 000 error Code. To worked with Microsoft to try to resolve that (never made), I am frustrated and all saved just reinstall Vista. When I try to reinstall Vista, I now get the message "installing Windows could not configure Windows to run on a hardware on this computer." The installation progresses up to the stage of upgrade (a final) then I get error and it puts everything back the way I started.
The only thing I changed hardware wise is the hard drive, so this error message seems silly because Windows runs on this material. I even double checked that Vista is always enabled. Anyone out there have any ideas?
I have a HP Pavilion Elite e9180t PC comes with Vista Home Premium 64-bit. I had the hard drive (Seagate/Barracuda 7200, 750GB) SATA to go over me (after the expiration of the warranty of course) so I replaced it with a WD Caviar Green 1 TB drive. When I rebooted the news of recovery disk to the new disk, VIsta worked but Windows Update does not work and I get A 8024, 000 error Code. To worked with Microsoft to try to resolve that (never made), I am frustrated and all saved just reinstall Vista. When I try to reinstall Vista, I now get the message "installing Windows could not configure Windows to run on a hardware on this computer." The installation progresses up to the stage of upgrade (a final) then I get error and it puts everything back the way I started.
The only thing I changed hardware wise is the hard drive, so this error message seems silly because Windows runs on this material. I even double checked that Vista is always enabled. Anyone out there have any ideas?
Hey GMPete
some posters have reported problems when replacing a drive hp etc. with a hp motherboard not provided player etc.
I suggest tha contact you hp because it's their recovery process you use
at the below link HP support forums
link below is for direct hp support contact us
http://welcome.HP.com/country/us/en/contact_us.html
Walter, the time zone traveller
-
Object
First time use of the browser lab does not.
Description of the problem
Okay, so, I'm working on a tutorial on CS5.5 page and I'm at the stage of using browserlab to preview online. I log in and enter my password then it opens my browser and I click on "Start using browserlab now" and a blanket of charge is displayed. It loads for about a minute and then remains 'white', which is actually the adobe with a language bar screen at the top right, but NO preview page? also, if I can go in dreamweaver again the browserlab tab reports an error saying "Timed out, failed to connect to BrowserLab.
Steps to recreate
- This problem occurs every time, and I have never run.
- 32-bit Windows 7 OS.
- I am using BrowserLab main interface as well as tests through the integration of Dreamweaver (DW is version 11.5 build 5315)
- I don't understand what means this next statement? "What is the URL you are testing against?
Expected results
I thought that browserlab open up my page in several browsers on a single page, so I could see if there are errors for different types of browsers.
Actual results
Does not load properly and gives errors.
Thanks in advance
Hi Marshall,
Thanks for the detailed report. Don't worry your #4 step, you do not at this point.
From what I can tell, you're opening BrowserLab in your browser first, then doing an overview of Dreamweaver, is that correct? I would try a test where first test you BrowserLab in stand-alone mode and if it works, then try BrowserLab with Dreamweaver integration. Please try to do the following steps:
- Close all your browser windows and Dreamweaver.
- DW leave closed, open a single browser window and go to https://browserlab.adobe.com
- Sign in and request a screenshot by typing a URL such as http://www.yahoo.com pressing
- It works for you? Do you get the screenshots for that? If this isn't the case, please describe the measures you have taken and what you see
- If so, close your browser window and open Dreamweaver. Do not open your browser to BrowserLab
- In DW, open the Web page you want to view in BrowserLab and press preview in BrowserLab Panel like button on your photo
- You may need to log in again, but I would like to know what is happening with this test.
Mark
-
My filter (for ads) works for some shippers, but not for others
I have several filters. One is "Advertising" for ads I want to read later, but need not be cluttering up my Inbox. It seems to work for a couple of the entries but ignores the rest. I checked the spelling, and they all seem to be correct. My settings are:
Apply filter by operating manually,
Apply the filter when getting new messages, filter before spam classification,
correspondence to one of the following values
Contains (followed by the name of the seller, such as honda, staples, cvs).
Move messages and adsThis is a support forum for Firefox. You will need to contact your
e-mail assistance provider.The filters have all send your 'junk e-mail' folder, but the implementation
a list of 'safe' for those that you want.Separate the issue;
Shows details of the system;Plug-ins installed
Adobe Shockwave for Director Netscape plug-in, version 12.1.2.152
Adobe Shockwave for Director Netscape plug-in, version 12.0.3.133
Having multiple versions of a program can cause problems.
You must remove older programs. Then download the current full installer.Shockwave Director:
Shockwave Standalone install / Uninstaller {web link}
Shockwave Director Version 12.2.1.171 http://get.adobe.com/shockwave/ -
I have Windows Vista (with Service Pack 2) installed on my system. I am trying to install a program called HotDocs. HotDocs is a document generation program. The installation process is arrested shortly after it starts and I get the following error message:
Error 1720. There is a problem with this installation package. A script required for this install to complete could not be run. Contact your provider to support personal or package. Custom action script error,: line, column,.
I tried to use msconfig to determine if any service could interfere with the Windows Installer (none appeared to be - their judgment has not solved the problem of turing), run the installation as an administrator, and help from Microsoft 'Fix It' Troubleshooting Guide (for installation problems), but none who has eliminated the problem. I also contacted the HotDocs seller and they had no solution for the problem and have not all reports other customers that their program was causing a problem.
Other solutions to this problem?
Thank you!
Hello
1. did you of recent changes to the system?
2. do ths problem occurs when you try to install another program?
3 did you perform the clean boot completely?
Follow the steps mentioned below and check if that helps.
Step 1:
Follow the steps from the link below and check if that helps.
http://support.Microsoft.com/kb/2438651
Step 2: Perform a clean boot
If you have not completely run the clean boot, try to make it completely.
Follow the steps in the link below to perform the clean boot.
http://support.Microsoft.com/kb/929135
Note: once you are done with the boot, follow step 7 in the link to your computer in normal mode.
It will be useful.
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- Adobe Reader; Mozilla Firefox will print for the Canon Fax (not my default printer) series. I am trying to print on a printer HP 7300, which is my default printer.
- I can print to the printer HP 7300 of Microsoft Word and Internet Explorer
- I have very limited ability to print from Microsoft Outlook, but the number of copies is out of control
- There is no error message
- Problem started after a power surge
- I did a restore of the system for the period before the problem started, but it has not set a problem. I also ran the Windows Print diagnostic program but found no problem. I ran McAfee virus scan and found no problem.
HelloYour printer is connected to a network?I would like you to follow the steps mentioned below.Step 1:Restart the print spooler service, set the default printer.a. Click Start, type "Services.msc" in the search boxb. in Services, right-click on print spooler and then click Properties.c. click the Dependencies tab. The first box list all system services that must work for the print spooler start.d. take note of each service, click OK, and then restart each print spooler service based.Step 2:Update your HP driver 7300 series printer and check if it helps.Aziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
I finished building the Web site for my girlfriend, and the rest is the RSS feed. It works just fine in IE 8, but Fire Fox 9 when the widget is clicked a bookmark box appears and asks if I want to save it as a bookmark. I'm not a programmer of the Java script so I hope help here! Here's the script:
- "< a href ="http://www.susangabrielle.com/1/feed"title ="RSS"alt ="rss">< /a >"
- for example http://www.susangabrielle.com/1/post/2012/01/post-title-click-and-type-to-edit.html
even if I get a message about missing plugins -
Driver Iomega for citizen Floppy more works for floppy drive, but not for memory cards.
Original title: HELP?
Driver Iomega for their citizen disk more. Œuvres for floppy drive, but not for memory cards. CF/Micro drive. He is listed, but does not work. Any suggestions? use of PSE * address email is removed from the privacy * got here but don't know how. Thanks in advance. PS Lost the cable to use this method. Best regards 73 or 88
Hi Leon S.Dorr,
You can get in touch with Iomega support to get the correct drivers for the card reader.
https://Iomega-na-en.custhelp.com/app/answers/detail/A_ID/14408
The view is http://www.susangabrielle.com
Probably you fixed, the RSS seems to work for me
Maybe you are looking for
-
The phrase in quotes in my question is instructions under "what are the groups of tabs? (Redirected from "what is Panorama?")
-
Palm Desktop 6.2.2. and the search function works only in Windows 7
Palm Desktop search function does not not in Windows 7 64 bit. Help, please.
-
I develop an application for blackberry, but I m stuck... My application does the following: -It detects an incoming call: . If the number is the order of the day the call is made as usual. . If the number is not the order of the day, I call a web se
-
BlackBerry Smartphones Verizon and Colombia
It is perhaps a stupid question made up, but... I use Verizon and I don't want to switch to another provider. I spend half my time in Colombia, South America. The work of the torch on the Verizon system AND the Colombian service, Comcell cells? Ca
-
Win7 + Cisco VPN + 3 G
Hi all I have a mysterious problem: I have a new Dell laptop with win7 64 bit and modem 3G integrated which is operated by the TMobile service. Everything works fine, I can connect, surf web pages, email recive etc... Problem with company customer VP