Workforce planning application

Similar Questions

• all the people of the Hyperion have access to salary information in Workforce Planning

  Most workforce planning applications store the names of employees and their salaries.
  However, a friend of consultant very known/seasoned categorically stated that private employee information not be loaded in planning / Essbase. It suggests that we should explain to lawyers in our HR and legal department, what we try to do and most likely they will not allow the information private to be exposed to Riverbed managers and planners. He says that even the names of the employees are not planning / Essbase, we should charge them as employee1, employee2 etc. Only HR should have the real names of the employee1... employee5000.
  
  Anyone can weight with their opinions as to whether it is a good idea to store salary information in Essbase? A simple mistake in the Essbase security implementation could expose pay for bad budget managers. In addition, all the people of the Hyperion have access to salary info. Is this 'kosher' with companies in the United States?

  Essbase Fan,

  I can speak only from my experience and I've been in the private, public and not for profit. Employee and salary information usually remain within the pay system. I don't think it's if the data longer in Essbase specifically as the users who access Essbase as you had mentioned on security.

  In addition also the Essbase administrator would have access to all salary information. So the question arises is the Essbase administrator and payroll the same people? If this isn't the case, you have now more than one person with knowledge of sensitive information.

  Loading data as ' employee 1' with salary 5000' is not really hide the data because the specific planners are likely to pine point by the amount. "

  What we do when we analyze the salaries one transactional and OLAP (essbase) methods is to summarize information on the salary by office and send to the analytical tool. In this case the sum your salary by office/division/region information, and then import into Essbase to do your analysis of planning in this way.

  Although it shows how each office has he can't pin wages highlight what makes each person.

  JTS

• Cannot select Capex and Workforce Plan type when I create a new application

  Hello
  
  Cannot select Capex and Workforce Plan type when I create a new application
  I can't see capex and plan type in the type of plan the labor tab.
  Any ideas?
  
  
  THX
  
  OS: Windows 2003
  Version: 11.1.1.2 planning
  Essbase EAS:11.1.1.2
  Web application: Tomcat

  Hello

  You must run the Configurator, select planning > configure product options > make effective course / capex are checked and apply.
  When you create your application again, they should be available.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Re-initialize the workforce planning

  Hello

  We use the Classic 11.1.2 application. Workforce planning was purchased during the initialization of the project. Total 3 possibilities of use and 4 types of diet (PL, Rev, salary and manpower planning) in each application. After you initialize the request once of the workforce planning on the one hand demand, the workforce planning has been abandoned so all forms and related content has been removed from this planning application (the essbase cube and relational databases is still there).

  How we can reset it? The initialization option under administration - boot is not visible in this application. 2 other applications always have the option to initialize the workforce planning. Do we not have to recreate the application?

  Thanks in advance.

  I advise to do, however if you are still interested, here's the link Oracle - Hyperion Labs...: re - initialize the Capex and labor

  Concerning

  Celvin

  http://www.orahyplabs.com

• Initialized the planning application, but can not see business rules (scripts).

  Hi all
  
  I'm new to Hyperion and would greatly appreciate your help. I created a classic application planning White (11.1.1.3) and initialized Capex planning (Edition-> initialize capex), then created and updated database so that it appears in Essbase too. I can see the application in essbase and planning, I see the forms of data and dimensions, formula member... etc. When I opened a data form it shows me downstairs left business rules and that I can run them and select execution prompts. But when I go to the calculation Manager and select the same application, see the actual scripts, how it is designed (essentially wants to learn scripts are created, calculation and all functions) under the rules and scripts, I don't see scripts anywhere. I have tried this 4 - 5 times by creating charges new application (I also tried the workforce planning and the same problem) with a plan type, more than 1 type of plan but its market not now. Can someone please help me from your experience what could I be missing and why his watch now.
  
  Thank you for your help in advance.
  
  Published by: 974509 on December 3, 2012 18:14

  Should have displayed the Manager queries calc in calc forum (https://forums.oracle.com/forums/category.jspa?categoryID=519)
  If you right click the application node in the Manager of calc, have you a menu to load rules presets?

• Workforce Planning - use of generic Dimensions in the variable Designer

  Hi gurus
  
  I am currently working on an application of workforce planning.
  
  I'm working on a script by transfer of an employee to a cost center to an entity in another Centre of cost in an entity.
  
  I then go to variable designer to modify the variables 'DepartmentFrom' and "DepartmentTo", in the hope of seeing the Dimension cost center and entity
  
  Then, I discovered that I can't select a generic dimension, in which my dimension 'Cost Centre' is a generic type.
  
  Only the standard types are available; Account, currency, entity, period, script, Version, year.
  
  Is it possible that I can make a generic dimension available when selecting the dimension type in the variable Designer?
  
  Please help, this may affect my dimension model in my application of workforce planning.
  
  Thank you!

  You can create the Variables to the application or database level instead of create Global Variables.

  At the level of the application or database, you will get the option to select the dimensions of the custom in the Variables.

  Kind regards
  Malezieux

• Setting up the workforce planning

  Hello
  
  We have an obligation to put in place a planning that is a requirement of the day 2 of the workforce.
  
  1. can create a normal planning application and then convert it to a workforce planning? If so, how?
  2 have we not create a separate Plan with the workforce planning selected type when creating the application, implement the planning of labor?
  3 Prereqquisites for the manpower planning?
  
  Help, please

  Hello

  1. can create a normal planning application and then convert it to a workforce planning? If so, how?
  Rep. : you can have a separate planning application and customize it to planning by creating your own labour
  dimension custom as an employee etc. But you cannot convert in workforce planning that comes with the installation of vanilla from planning.

  2. don't we have create a separate Plan with the workforce planning selected type when creating the application, implement the planning of labor?
  Rep. : You don't have to create the type of separate plan for labour. When you select labor during the creation of the planning application
  and initialize after the creation of the app, it will automatically create the actual cube plan type or of the active population of Essbase for her.

  3. prerequisites for the manpower planning?
  Rep. : No configuration required, you can see the workforce_admin guide to learn more about the workforce planning.

  Thank you
  Sourabh

• Rewrite of the Planning Application

  Hello
  
  We have recently updated our version 11.1.1.3v to 11.1.2.1.
  We have to crush the problem in the planning application.
  I create an application lets say Test1 in planning, then I loaded the dimensions created dataforms. Then, I create another app Test2. I loaded dimension, data refresh for Regional service. Now when I go its similar to Test2 in Test1, everything I created in Test1 is now gone.
  FYI, we also initialize workforce Planning in the same application.
  
  Thanks in advance.

  If it is sql server, then you are using a different database by application, planning for oracle, you use a different pattern by planning an application, do not use the same as the one it replaces.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Hyperion workforce planning

  Dear gurus
  
  I'm new to Hyperion Workforce Planning, I read the document from the admin. I have some doubts
  (1) where to add details of employee base?
  (2) can add us custom data forms for attributes? If so, please share the steps.
  
  (3) I have successfully configured the calculation Manager, but failed to initialize the application if I take the calculation Manager when creating application.
  
  Help, please.

  Hello

  To create the Employee dimension and associate attributes such as Race, gender etc. to the employee.
  Step 1: first create the dimension of the attribute with the members in the planning application for Race, gender etc. and associate them with the Employee Dimension.
  step 2: create the .csv for employee of 1000 that load into the planning application.
  This file will have all the columns as
  Example:

  Parent, employee, Alias: by default, storage data, aggregation (Wrkforce) attribute.
  'Existing employee', XYZ, XYZ, store, + male.

  Use the preview utility load to load the employees under Parent "employees". In this way, you can load the metadata for
  your Employee dimension and also your attribute will be associated at the same time. Once your dimension or the metadata for the employee gets loaded.
  You can then load the data for employees.

  Hope you understand...

  Thank you
  Sourabh

• Can a group cause multi planning application?

  I use version 11.1.1.3, I installed the application example of planning, and I will install the application of workforce planning. I know I should create a new data source for the demand for labour, should I also create a cluster that is different from the instance of cluster used in the sample application? Or an instance of cluster can have multi application of planing?

  Hello

  Except if it is a requirement, then I would just use the default cluster and assign all applications against this default cluster.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• HOW TO CREATE A TYPE OF ASO ON THE EXISTING PLANNING APPLICATION

  Hello world

  We run EPMA 11.1.2.4 and that you have configured hyperion planning application using EPMA interface, the requirement is:

  1. how to create a type of ASO on an existing planning application? and what are the steps on 11.1.2.4?

  I would be very grateful if anyone in the community can help us

  Thank you

  Concerning

  Shahrukh

  It all depends on if you are looking to the future as EPMA will die slowly, most of the new features is pushed to the classic, but I understand, it can be quite a big change.

  If you are going to stick with EPMA then you should really create the ASO application in EPMA and try and use some features shared dimension to enjoy.

  See you soon

  John

• ASO Plan type of problem of security filters planning application

  Hello

  We have a planning application that has 3 plantypes BSO and a kind of ASO. Security for the OSB is made by the secFile.txt and works perfectly. For the ASO cube, we tried to create filters and their allocation to the groups, but we receive the below error

  "Cannot change the access authorization on the application of planning in shared services mode.

  The groups are provisioned with Planner for the planning application and the access under the Cluster Essbase server.

  Groups or user tables are displayed as planning instead of planning and Essbase.

  Please let us know how to create filters and their assignment to the plantype of ASO by EAS/Maxl planning without errors (syntax is known)

  version 11.1.2.4

  Public sector, planning an application

  Cube DP_ASO

  Thank you
  Sravan

  It is designed to be used via the planning layer and not directly to Essbase, you can access the layer of planning using Smart View and reports

• Planning application no no projection in Shared Services 11

  11.1.2.3 version

  Last week our planning database got corrupted, do not know how, but it happened.  I went through the steps to recreate and restore the data, however, there is a small problem.  The application is now not showing in Shared Services, therefore, that I can't access SmartView.  Here is what happened.

  1. because I'm a nervous nelly, I first renamed 'PLAN' "PLAN1" via EAS

  2. I then selected "Create Database" planning and had no problems, a new Essbase application and databases have been created.  The new application called 'PLAN' as expected

  3 al ' Shared services, now, what emerges are two applications "PLAN1" which is clearly a single essbase application and "PLAN1" which is a planning application.

  I can select plane1 as the planning application and can get security charge very well, however, in SmartView, users cannot connect.

  How the world make it only show 'PLAN' and get rid of the old "PLAN1" applications.

  Thank you!

  Finally, I felt comfortable enough to register the application with Shared Services.  A few seconds, the problem was solved!

• Option to uncheck a type of plan when you create a new planning application

  I create a new planning application where I can have only 2 types of plan. I want to disable the third type of plan that is established not to when I press the button create, but the boxes are grayed out. Has anyone run into this situation before and I did fix you?

  Please see attached screenshot.

  Comes to learn that it is a known problem with applications of budget and planning in the Public sector. As noted in the planning 11.1.2.4 new version of document:

  Public sector planning and budgeting

  l 20114042 - during the creation of new sector Public planning and budgeting applications with this version, all non - HCP available plan types must be selected, for example, plan1, plan2 and plane3. If each of these types of plans are not selected, creating application errors will be produced.

  the lines in the forms that you save and open, l 19896540 - budget request, are reduced. This collapse of the line hierarchy occurs only when you open packages of decision data collection forms.

• Problem of Oracle Hyperion Planning applications

  How to find if a planning application is classic or EPMA... Please provide any solution...

  Thanks in advance for the answer...

  You or your colleague have already asked this question of interview style - How to know my app is classic or epma in hyperion

  See you soon

  John