workspace files recorded

Similar Questions

• Documentation of the Workspace files

  I would appreciate some recommendations to get instructions on creating files in the workspace. I watched the TS Ch 2 reference manual, but there isn't much there.

  For example, I would like to know how to add data files, ini files, etc.

  What all is in a workspace file? I'm looking at the system that I inherited. Under code modules, it lists a few files sequence and beneath them a few screws and a VI that is not under a file of sequence but there are hundreds of screws in this project.

  Thank you

  JVH

  I do not have here TestStand and the exact process escapes me, but in the workspace window, you can right-click and get a menu to add folders, files, etc.

• How can I determine what files given File Record Segments Point to?

  I'm under NTFS, and I have a volume of 2 TB with a lot of files that it contains.  Fortunately, I cloned the entire volume to another volume of 2 TB on occasion (using WinDD, basically an exact bit-by-bit image of the entire 2 TB).  Unfortunately, the volume, I used to work failed, and my last clone was old enough.  To remedy this, I switched to Linux and ddrescue to get as many recovered defective disc I have.  When I finally gave up the recovery (after weeks, but it seemed that it would take years to get a lot more value), I stayed with 1.3MiB evil space in two or three sections of the volume, especially in the 1kiB sections (generally there was 2 bad sectors, followed by a number of sectors well followed by 2 more bad sectors etc.).  The volume had clusters of 64 Kio, which left still potentially a lot of corruption.  After all this, I took the volume newly cloned (from bad disk) back to windows and ran chkdsk.  He finds 1 segment of corrupted file, 336 segments of the orphan file and 440 bad index entries.  So he deleted all those (which included about 6 files that moved to the chkdsk finds the file, the rest was individual files which are now gone).  I do not know what files have disappeared, but I know that most of the lost files are probably on my good old clone of the volume.  Comparing volumes per-folder basis, would be a nightmare, and I suppose cannot easily use a tool (or find a free) because of the number of changes that have not been saved.  I have the registered chkdsk log so I can sort through this.  Can someone tell me a good way to know what files the segments to record file deleted perpendicularly on the volume where they have not been removed?  For example, here are two chkdsk log records:

  Delete a corrupt file record segment 1107859.

  Delete a 1069930 an orphan file record segment.

  Since I know specifically what segment to save file, I need to look on the good clone, can I somehow extract file information about the MFT file segment numbers?

  Notice that I must not use XP to do, which is be where the volume has been created and repaired.

  Well, I finally had the chance to try some Linux ntfs-based utilities.  I'm not sure they are NTFS - 3g, important or ntfsutils, but all those who have a favorite linux distribution should be able to fire and get the information I needed easily.  The numbers are numbers of inodes, and two orders were very useful.  It has provided what I need:

  ntfscluster - I

  It included the full path to the file in question and very little information.  This command has provided a lot of information that I didn't need:

  NTFSInfo-i

  He did not provide the path, but provide the number of inode in the directory parent, so you can reverse engineer the path using this command again and again.

• corrupt attribute of the file record segment 117122

  During startup, I get an error message saying that the PC is removal of a corrupt file record segment attribute 117122. PC mentioned 3 steps of repair. He mentioned that some type of difficulty 128.680DD2F1 AND 128.7B89E8AO as well as a series of other numbers.

  I come back from a trip where I used 2 public networks. I have a virus checker - which may explain why the PC tries to repair itself.
  I'm afraid just because after this repair the computer will work fine until I have shut it off and restart again. Then the same thing happens. The repair takes about 20 minutes.
  Any ideas or suggestions?

  Hello

  Welcome to the Microsoft community.

  From the description of the problem, it seems that whenever you turn on your computer you get an error "PC deletes an attribute corrupted 117122 file record segment.

  Try these steps and see if it helps.

  Method 1:

  Perform a Startup Repair:
  Startup Repair
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair
  Startup Repair: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  Method 2:

  Run the System File Checker (SFC) scan and verify.

  File system (CFS) auditor analyzes and verifies the versions of all protected system files after you restart your computer

  Reference:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:

  To disable automatic disk checking at the start of Windows through registry, go to the following registry key:

  Registry warning: the following steps include changing the system registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article:

  Backup and restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/backup-and-restore

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager

  In the right pane, double click BootExecute.

  The default value of the key is autocheck autochk *

  * means that each drive is checked for consistency. Just add /K:C to the end before*. /K switch will disable autocheck on C: drive at Windows startup. If the final value should look like this:

  / k: C to autocheck autochk *.

  If you want to add more drives, the key should look like this: (by disabling the drives C and D)

  / k: D / k: C autocheck autochk *.

  If you want to restore all default, just replace the key with the default i.e.

  autocheck autochk *.

   

  Please let us know the status of the issue after performing the above methods. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Developed by default SharePoint Workspace files

  Hello

  In the last months I searched and read many articles on the web related to the display of folders in MS SharePoint Workspace that opens all files in the default expanded view. All items and responses of the MS self-help groups conclude with the same: folder view "opens with all records enhanced by design", and "there is nothing we can do with this at this point."

  For those of us who are committed to use the workspace despite that flaw, could you please comment on the justification for why Microsoft has decided not to seek a solution to this obvious problem?

  Best regards
  TerjeL

  Hello

  You have reached the end to the Microsoft product support. I suggest you post your query on the link below to get assistance on the issue:

  http://social.msdn.Microsoft.com/forums/en-us/category/SharePoint/

  It will be useful.

• I can't delete a file recorded, prepared by a custom number template

  iMac, OS X, El Capitan, 10.11.6

  Delete the last completed copy but not 11 copies recorded during the preparation. The files are in MY FILES. Tried to do drag, remove, button, command + DELETE. Double-click the file gives a pop-up 'alias 'File Name' cannot be opened because the original item cannot be found... DELETE aliases, FIX, okay.  The Alias to delete does not, gives the difficulty Alias "select a new original... does not open."  A pop up States: "cannot perform this operation. An unexpected error occurred (error - 43)

  Any ideas on how to remove 11 copies.

  Thank you

  George

  Hi George,.

  I did a brief search on that, and reached a post in these forums of Linc Davis, suggesting a restart of the computer could heal the situation. Certainly worth a try.

  Either way, the message you read indicates these items are not files. they are aliases (pointers) to the actual file. By double-clicking an alias will open the file it is pointed. The message "Can't find" sense - the file is not found because you deleted.

  Kind regards

  Barry

• Anyone know how to export a teststand workspace file (*.tsw)?

  Export my file Teststand workspace in a text file for import into another bus app, that's what I want to do... does naybody know how?

  It works thanks

• series E200 / burn files recorded on a sound cd play on any cd player

  I need to know how to take my Sansa (off FM) recorded files and burn them to a cd.

  I need 2 instructions, one for Windows xp and Vista.

  (I have Vista but I bought a Sansa for a gift and they ask me how to do this and they are running windows xp).

  I especially had problems burning CDs on this new computer with Vista.

  Help, please!

  Tawrena

  I have no idea how to do it with Vista. XP is pretty easy, although the details will depend on what program allows you to burn CDs.

  You say you're a beginner, so I'll take it in small steps.

  1. use the supplied cable to connect the Sansa to a USB port on your computer.

  2. go into 'My computer' (it will be in the "Start" menu or on your desktop) and locate the Sansa. Double-click it to open it.

  3. double-click on "internal memory".

  4. double-click on 'music '. This will show all the music files you have stored on the Sansa.

  At this point, you can choose to burn directly from the Sansa or to create a separate folder containing everything you want to burn. The burner will have ways that you use to specify what files you want to burn. You can tell them right out of the 'Music' on the Sansa file or a separate folder (which I recommend)

  5. to do this, right-click on the desktop (and hold down) and slide on 'new '. The menu dialog box drag on 'File' and release the mouse button. You will see a new folder on the desktop icon and it will be called "New folder" (of all things!). Double click on it.

  6. you have now two open folders - folder 'Music' of the Sansa and the "new folder" (which will be empty).

  Find a space on the blue bar at the bottom of the screen where there is no icon or click here, right and rectangular 'button '. Drag "Vertical mosaic Windows" and release the mouse button.

  7 left click on one of the files in the folder "Music" you want burned and, while holding down the mouse button, drag on the "new folder" and release the mouse button. The file will be copied into the "new folder".

  8. Repeat this until the "new folder" contains all the files you want to put it on CD.

  In fact, there is a shortcut, you can use here. Left click one of the files you want in the 'Music' folder and then hold the 'Ctrl' key pressed on the keyboard while you click on others. You can select multiple files in this way.

  After that that they are all out highlighted, CTRL key and left click one of the highlighted files once and hold down the left button of the mouse down by dragging the entire cluster highlighted on toward the "new folder".

  9 point your program CD burner to the new folder and specify that you want to burn all of the files it contains. The burner program must have some kind of gauge that tells you how completely files you chose will make the record. If you selected that too, you may need to remove some before you can proceed with the burning.

• email an mp3 file. (recorded on a digital voice recorder... personal folder. Comcast. says the file is too large (1.4 MB)

  I'm trying to e-mail a personal voice recording on a digital voice recorder.  Google and Comcast rejected the message, indicating that the server of the recipient (Comcast) has rejected as too grand (1.46 MB) of the suggestions?

  I'm trying to e-mail a personal voice recording on a digital voice recorder.  Google and Comcast rejected the message, indicating that the server of the recipient (Comcast) has rejected as too grand (1.46 MB) of the suggestions?

  =====================================
  1.46 MB isn't a very large file... I think the Comcast
  limit is something like 10 MB. The problem may be with the file
  format... try to rename or compress the file and see it done
  a difference.

  Example... If the name of the file has been voice.exe replace voice.jpg
  and to inform your recipient to change back before playing.

  Another alternative would be to download the file on the following
  the site and send the download link to your recipient:

  "SendSpace.
  http://www.sendspace.com/

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• File recorded incorrectly and parts of the image are missing

  I was working in Photoshop CC and saved that I made changes.  I have added teeth, skull, the eyes and recorded.  No problems.  I added the background and not registered, no problem.  I added the flame and saved... photo is destroyed.  When I clicked saved it changed the image and now the bottom is that partially, the flames have missing parts, the dog has missing pieces and my picture once done for a class assignment is destroyed.  If there is a solution, please help me.  Otherwise I'll have to go back and redo everything.  Which waste far too much time because I have 3 other assignments to do and who does not understand to make posts on the site of the student and watching the video tutorials for other assignments.

  Here is the version incorrectly saved as a png image of the image that it was recorded so wrong what he was:

  

  Help, please!

  Julie S.

  Please see file saved incorrectly and that some parts of the image are missing

  (Double Post)

• Miss me about 15 of my creative cloud file records

  They are just GONE - and has a record that still has a "!" on each subfolder and file so that they are not properly synchronize. WHERE ARE THEY? I really need access to these files via my finder and not via the Web site. Help, please. I tried turning deactivation/activation of the synchronization, but nothing changes!

  Erin is perhaps the question-

  With the recent update of the application of Creative Cloud Desktop (1.9.1.474), we have unfortunately introduced a bug that causes the creation of a new Creative Cloud Files folder and re-synchronization of all content. This will happen only the first time that the synchronization application runs after the update. This caused an understandable pain and confusion, for which we really apologize.

  Creative application Cloud Files contains a logic that supports the use of several Adobe ID. This allows to disconnect from an ID and in, but keeps the contents of your separate creative cloud. When you sign out and change identifiers, the app moves the previous creative Cloud Files folder and it's content and he adds with the already signed in ID (User@AdobeID). Then, it creates a main folder and begins to synchronize the content of the identification of new.

  The bug I mentioned earlier occurs, as the app believes an ID selector took place and as such, moves the current record of Creative Cloud Files and attempts to annex the already signed in ID. As no switch actually took place, it manifests as (unknown).  The application then creates a main folder to synchronize the data.

  What you end up with is essentially a creative Cloud Files folder with your new synchronized data and a creative Cloud Files (unknown) folder that contains duplicate data.

  This happens once, after the last update.

  The solution is to simply delete the (unknown) Creative Cloud Files folder.

  I recommend that ensure you that you have no pending change you can do offline and you check the contents of the folder new, main designer Cloud Files contains everything you expect of him.  If this is not the case, check the contents of the creative Cloud files (unknown).

  If there is still an incompatibility with your data, you can check on creative.adobe.com to confirm that your data is there.

  If you have any other problems or questions on this topic please email [email protected]

• Referencing files images, CSS, and Javascript from the system instead of workspace files repository

  Hello

  I am currently using Apex 4.2 and I want to know if you still have to import images, CSS and Javascript files, respectively, in a workspace (like the shared components) to use them in an Application? Alternatively, they could be referenced in a directory on the file system? I'm still not familiar with CSS or Javascript technology and I'm trying to find out as much as possible about how to use and where Apex can do. All comments gratefully received,

  Kind regards

  Kevin.

  Since you're using the EPG you will not be able to reference all files directly in your operating system.  You can load in XDB using FTP, WebDav or PL/SQL location.  The PL/SQL method is described in these posts:

  A random overview of Oracle: loading images in Oracle XDB

  Loading images custom when using EPG

  I don't know if there is any benefit from their download in XDB compared to the APEX workspace.  Guess it would make sense that you had a file that you wanted to be referenced by more than one workspace and do not want to download the file in each workspace.

• Audio files recorded in Captivate are wav. files. You can record in mp3 format?

  Apparently, we need the mp3 file to upload to the lms. This been done? If so, how?

  I already recorded audio with a usb microphone.

  Sabrina S.

  You misunderstand me. When published the WAV files are converted to MP3 by Captivate; which is a compressed format (same way images will be compressed as well). So it shouldn't be a problem.

  WAV offers you the best quality, I tend to import WAV for audio clips in the CP, but you can also import MP3s with no problems.

  Lilybiri

• When I edit the 70 MB file recorded with Camtasia 8, Pr Pro CS6 exports a file of 8GB!

  I want to send my screenshot on YouTube tutorial, but who would take 500 + minutes with 8GB file.

  Does anyone have any experience with the export of this type of file? I recorded it to 15 images. I tried to follow the advice of Belluno, but half the time, I'm not sure what he's talking about.

  Should what settings I use?

  Regarding the file 70 MB, his capture about 3 minutes of screen.

  In Adobe Premiere Pro CS6, I added a fade in and fade out.

  Of course, these effects do not add 8GB in the file.

  If anyone knows what I am doing wrong, please let me know. It would be greatly appreciated!

  I have good news for you.

  Under Format, select H.264

  Then select the YouTube preset in 1080 p.

  Set it to 15 frames per second, since it is what your registered, which is generally good for the screenshots.

  Who will provide a file that YouTube will be quite happy with. And it will be much smaller. Significantly!

• multitrack wav for 1,5 hour files record only 3 seconds long - lost audio

  I used Adobe Audition Mac CS6 version 5.02 build 5 a few days ago to record a conference of lawyers that I get paid to save.  I have been using to record multitrack and segments that have been about 1.5 hours of recording as stereo wav files.  During the second track record after about an hour, while the surveillance on phones and I look at the interface, the track popped out folder.  and stopped.  When I checked the file wav from this record, it is only 3 seconds of time instead of 1.5 hours.  I couldn't find anything useful in the trash or the location of the main disk cache.   A search of my hard drives for files created so far there isn't anything useful either.  I have auto save every 10 minutes turned on and I thought that hearing were the basic crash protection built in.  Is it possible to recover this loss of audio in a temporary file or cache somewhere, while the law firm that hired me will not tear me up like a pack of piranhas to lose audio they wanted to sell to their customers?

  Well, if you have been recording in multitrack view, it doesn't is not much of interest in research in the trash, or any kind of disk, because in multitrack mode, cache files are written directly to disk and no to any form of temporary storage. This also means that you will not find anything in the way of a backup. I'm afraid that if the files are not where you specified whether they are when you started recording, you have almost certainly lost. If you're absolutely sure he was recording for all this time, it might well be that the header of the file was damaged when he stopped, and that it is in fact a larger file that you have been led to think. The only thing that you can try with this scenario is to open the file in a .raw, provide the sampling frequency and type info and see what opens. If you're incredibly lucky, you will get your file back to the point that it stopped, and then you can re-record it. But don't hold your breath...

  1 rule to record anything original or punch - do not with hearing, or any other software if it is the only record you will end with. You should always have a redundant system of some sort. For live recording I never use hearing as a backup to one of the hardware-based systems. I have never had chess hearing during a recording, but you can bet your sweet life that if I had been absolutely according to her, he would have!