Workstation 9: mouse leaves no window of computer virtual (Windows XP prompt, tools installed)

Similar Questions

• Windows Media Player opens when I type any key. This started 2 days ago and did the computer virtually unusable. The mouse is however immune to this phenomenon, so I can still use it. No idea how to solve this problem?

  Windows Media Player opens when I type any key. This started 2 days ago and did the computer virtually unusable. The mouse is however immune to this phenomenon, so I can still use it.

  No idea how to solve this problem?

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Do a system restore. Choose at least 3 days ago when you did not have this problem as your restore point.

  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• mouse and screen windows freeze-up during the operating mode normal ok in safe mode

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • re installed the OS, but the problem persists

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• My delay of mouse every time that the computer is something different

  I click on something and then the computer freeze for a few seconds then he contiues on the process.

  Hello
   
  1. deal with this problem when you use the mouse to control the navigation or browsing the files on your computer online?
   
  2. What are the changes of hardware or software that are performed on the computer before the question?
   
  Please follow the links below to solve the problem.
   
  Method 1
   
  To start the computer in safe mode
   
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
   
  
  If the issue does not occur in safe mode then continue troubleshooting conflicts with third-party software.
   
  Method 2
   
  How to configure Windows XP to start in a "clean boot" State
  
  http://support.Microsoft.com/kb/310353
   
  Note: Please follow the instructions under "How to configure Windows to use a normal start State", to start the computer in normal mode once the necessary troubleshooting is complete.
   
  If the problems persists so that the issue could be caused due to infection of computer, even bad sectors on the hard disk can cause freezing.
   
  Method 3
   
  Step 1
   
  Scan your computer for viruses and malicious software.
   
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
   
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
   
  See, http://support.microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab0

  Step 2

  
  Run Chkdsk on the Windows partition
  to run a check disk on the Windows partition.
  To do this, follow these steps:
   
  Open an administrative command prompt window.
   
  a. click on start
  b. click on Run
  c. type CMD (press enter)
  d. at the command prompt, type the following command:
  
  CHKDSK Volume: / f/r

  the volume is the score of the player in your computer that we need to check. For the most part, Windows Xp is installed on the C: drive of the computer. So if you have installed on the drive C: Windows, the command will be:

   

  CHKDSK C: /f /r

   

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
  See also,
   
  Refer, the links listed below for more information

   
  Slow PC? Optimize your computer for peak performance

  http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=bEO-QPUiwuZ

  Difficulty of Windows system performance slow computer problems

  http://support.Microsoft.com/mats/slow_windows_performance/en-us

  I hope this helps.

• Svchost.exe is free running and leaves multiple windows open all gel. Re-loaded windows XP after a crash with original rescue records.

  Original title: Windows XP - free race - is lost.

  Just re - load windows XP after a crash with original rescue discs, svchost.exe is free running and leaves several Windows Open gel, all on and offline. Any ideas? I ran ms-fixit beta for all listed. I also disabled Norton and now use Windows Defender, still no luck.

  Hi MarkBerri,

  ·         How long have you been faced with this problem?

  ·         Did you do changes on the computer before the show?

  Svchost.exe is a process name generic host for services that run from dynamic link (dll) libraries. The Svchost.exe file is located in the folder C:\Windows\System32. At startup, Svchost.exe checks the registry services part in order to build a list of services that it needs to load. Multiple instances of Svchost.exe can run at the same time. Each Svchost.exe session can contain a grouping of services. Therefore, separate services can run, depending on how and where Svchost.exe is started. This grouping of services enabling better control and easier debugging.

  Svchost.exe groups are identified in the following registry key:

  HKEY_LOCAL_MACHINE\Software\Microsoft\WindowsNT\CurrentVersion\Svchost

  You can run the auditor of system files on the computer.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Note: if it asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker:

  http://support.Microsoft.com/kb/900910 (valid for Service pack 3)

  Hope this information helps.

• Scrolling the mouse stuck with (Windows 7) wireless mouse

  I have an optical mouse Labtec wireless for laptops. It causes a scrolling to happen unintentionally with the sliders and the drop-down lists, as long as the mouse is positioned on the element.

  For example:

  (1) when I joined these forums and had to choose a country made mouse scroll down to the bottom without my intervention (other than by selecting the menu drop-down). Almost all the drop-down boxes tend to be done regardless of what program it is in.

  (2) if I try to adjust the volume in the system triggers the sound mouse tray even when I'm trying to lower it.

  (3) in some programs of the mouse scrolls the page automatically. It does not work with all programs. Chrome, IE, Firefox, Acrobat, Notepad and many others is not affected.

  (4) I don't have these problems with XP at all, but I did when I used Ubuntu (mouse would scroll the tabs and cycle always to the first area of the taskbar of Ubuntu.) I had to alt - tab to switch windows).

  (5) for my first installation of Chrome, the mouse would be automatically scroll the tabs to the first even if I haven't done stationary above the tabs. I could could properly select another tab if I clicked it and then left mouse tabs quickly.

  I did which solved the problem:

   " The document suggested to change some registry values to disable this behavior of high resolution. So I did exactly cela and adds the following entries 2 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\HID\Vid_xxxx & Pid_yyyy\\Device Parameters

  VScrollHighResolutionDisable  = 1

  HScrollHighResolutionDisable  = 1

  
  
  ( http://social.technet.microsoft.com/Forums/en-US/w7itprohardware/thread/71db7003-45b1-4fbc-844f-da4894c20036/)
  

  (5) I tried to open the mouse and by removing the mouse wheel. This had no effect. I couldn't scroll through manually, but the mouse would be automatically scroll.

  I'm puzzled. Can anyone help?

  Seted Hello,

  Thank you for your message.  Have you tried to use a different mouse or port on your computer?  In addition, you can try using your mouse on another computer to see if the behavior is the same, in this case, the problem may be with your mouse.  Please let us know.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Combo sculpt comfort keyboard/mouse Microsoft - mouse problem driver windows 7

  Just bought a new combo desktop Microsoft Sculpt comfort (keyboard and mouse). I have a problem with the mouse in Windows 7.

  This mouse has the button scan blue on the left where you can drag upward or down and click. I have this attached to a Dell E6520 laptop.

  In windows 8 the slide it towards the bottom of the function pulls the top of the list of open windows. In Windows 7, it's the browser's "back" button. I installed the latest microsoft mouse and keyboard software 2.3.

  When I first installed the drive, everything works as expected. Suddenly the button works like the browser's "back" button. A few hours later, or after a reboot slide down begins to open the windows instead. The only way to fix is to uninstall the driver and re install. I tried the USB in USB ports and all are working the same.

  How can I solve this problem? I called Microsoft support and they said to return the system and replace it. It is not a hardware problem and return it will do no good.

  Any help would be useful.

  Thank you

  Hello

  Thanks for posting your query in Microsoft Community.

  For you help I would be grateful if you could answer the following questions:

  1. you did it all change hardware or software to your computer before this problem?

  2. have you contacted Microsoft Hardware Support?

  Try the procedure described in the following Microsoft Help article.

  http://www.Microsoft.com/hardware/en-us/support/troubleshooting

  Note: Select the device with which you are having problem with.

  If the problem persists, contact Microsoft Support Hardware for help. This issue may have caused corruption of any driver files, and then will be able to help with this question.

  Hardware support of Microsoft:

  http://www.Microsoft.com/hardware/en-us/support/contact-us

  Hope the helps of information.

• How do you change the orientation (direction) of an optical mouse wireless on Windows 7?

  Don't ask me why, but I was an operator Dyslexic mouse for many years.  I managed to change the direction of my mouse over the years of Control Panel, but now there is no option to do so.  I need the mouse to move upside down, in the opposite direction.  How do I customize my mouse setting?  A big thank you to any genius!

  Hi Sytengan,

  Please help me with the following information related to this issue:

  1. What is the brand and model of your wireless optical mouse?
  2. You see any option as mouse in the window Panel?
  3. Have you made changes on the computer before this problem?

  I suggest you to visit the manufacturer of the mouse and try to install the drivers and check out them.

  See also: change the settings of the mouse

  http://Windows.Microsoft.com/en-CA/Windows/change-mouse-settings#1TC=Windows-7

  Please answer us on the status, as well as the information necessary to help you more.

• How to activate the Internet connection on Windows Server 2003 is installed in the virtual machine in VMware Workstation 8?

  I have Windows Server 2003 is installed on a virtual machine in VMware Workstation 8. I need it to learn and practice the use of the Active Directory. I've also set up 3 Windows XP workstations connect to it, which means that they can communicate with Server 2003. What is lacking is the Internet connection on all of them. When I run ping 8.8.8.8 in one of these virtual machines, I get, 'Destination host unreachable.'

  I'm not sure, what if the problem comes from the settings in Windows or the settings of the virtual machine.

  Can someone help me?

  Thank you, guys. I was finally able to put in place. It was quite an ordeal to deal with IP addresses and virtual networks. Here's how I did (in the screenshots) in case someone else needs it.

  (I also confess that it is perhaps one of the ways to implement. Maybe there is an easier way to do it with DHCP...)

  1. in your computer where is installed VMware Workstation 8 begin the "Virtual Network Editor." It is located in the folder of installation of VMware Workstation. And implement the network following (VMnet2 in my case):

  

  2 then in VMware Workstation itself in the virtual machine when Windows Server 2003 is installed set up two network as connections:

  This one is for external access to the Internet:

  

  And this one for intranet communications AD:

  

  3. then in the machine virtual de Windows Server 2003 set up what follows for two network adapters:

  For Internet access:

  

  Then, you need allow this connection to share:

  

  And then for the ad access to workstations (ensure that the static IP address is in the range specified in the virtual network over VMnet2 network editor). I've also set up DNS to 127.0.0.1 because I installed on this Windows 2003 DNS server:

  

  4. from the Windows 2003 VM try ping 8.8.8.8. It should work now.

  5. go to each workstation, in my case, Windows XP, each in its own virtual machine and set up the network in the VMware Workstation as follows:

  

  6. then in the virtual machine, configure the network connection for Windows XP workstation. Don't forget to assign a new static IP address for each workstation, which not coinside with IP of the domain (this IP address must come from the range specified in the virtual network over VMnet2 network editor):

  

  7. try first ping the domain, in my case ping 192.168.237.128. And then Internet, ping 8.8.8.8. The two should work!

  Continue with steps [5-7].

• Workstation 8: move vm tabbed window

  Hello

  I am trying to run a virtual machine in its own window. I tried dragging the tab of the virtual machine off my computer, but I have a red x. How can I do this? Thank you.

  One way to do is stop the virtual machine, close the tab in VMware Workstation (to unlock the files) and start the virtual machine using VMware Player, which is installed with VMware Workstation.

  André

• I want to synchronize my Firefox on Windows, but also Linux installed on the same computer. How can I do this?

  I want to synchronize my Firefox on Windows, but also Linux installed on the same computer. How can I do this?

  Add the installation of Firefox 2 as a "new device".
  
  https://support.Mozilla.com/en-us/KB/add-a-device-to-Firefox-sync

• mouse enter table for mouse leave cell

  Hi all

  I enclose a vi that I'm looking for help. I spent many hours doing this work, looking for examples, using the help and examples, etc. but hit the proverbial wall.

  'Factory data' tab is a table with 3 columns and 15 rows containing strings. The first column heading is the name of meta to a number of channels (h - On, Zac, Cap etc.).

  The coloumn of description contains a brief description of the string (string voltage photovoltaic, PV string current eyc.) The second column contains the units for the measured value (V, mA, kWh, etc.).

  I was able to get the position of the individual cell and it together in an array of strings which give additional data for this cell entry showing this string in a FP view

  That's what I want to do, rather than what IS happening

  Get rid of the display of the explanation and use a pop up... I don't want to anugly information on the FP box

  Instead of using the mouse down, I would like to have mice enter (and mouse leave), THE INDIVIDUAL CELL, to make the popup to disappear

  That's practically all I want at the moment

  If someone could give me an idea how I would be grateful.

  Thank you

  PS... may not look or function as 'Nice' as some posters might do, but good... I'm working on

  Concerning

  Ray

  I passed with a movement of the mouse, then pushed your text in the strip of the art as well as aid showed the help screen. A timeout that hides the help screen after 10 seconds is not presented.

  

  Playwith it and adjust to your taste.

  You could get fancier, but start with this.

  Ben

• Hovering over the triggers Drop Down Menu event "mouse Leave"

  Hi, if anyone can help with this problem, I would be very grateful.

  I have a tab control changing to another page when the user enters or mouse leaves the tab control. The purpose of this is so that the tab control becomes invisible when colored 'transparent', according to the movement of the user's mouse. This allows the full screen to use to display the video when the menus are not necessary, and menus can be displayed when the user enters into the surface of the tab. There is also a button to lock the menu in place.

  It worked fine until I added a few rings of text to a menu tab. When the user clicks on the drop-down arrow and hovers over the elements, the case of the event as if the mouse has left the tab control, tab resets back to page 1 (white page). I don't want to do it, but I still want to use the drop down menus because they are more concise and more convenient than the alternatives (listboxes, etc.). This does not happen with the buttons and other controls, only with the drop-down menus, AFAIK.

  Can anyone suggest a work around? I chose this method of relaxation because it is less demanding in processor using the mouse move event coordinates to trigger the tabs appear. I need to save so much time processor for video capture possible. I enclose my vi (Labview 2010 32-bit) with the gray tabs so you can see and test the value for yourself.

  I would add one for the event to "Operate the Menu Activation" for the controls of the ring.  This simply fuels a real constant in a shift register in time loop.  In the mouse enter and leave events add a case structure and change the pages only when the value Boolean false.  Ensure that supply the true value in the registry to offset in the mouse leave case also (other cases may use the Default of False if you don't have to string wires in all cases).

  Quick MOD after extraction of the stuff IMAQ, remove also the delay in case of loop Structure, provides it ARE necessary delays.

• I have no sound on my computer (Windows XP). I installed audio driver with no result. What to do next?

  No sound

  I have no sound on my computer (Windows XP). I installed audio driver with no result. What to do next?

  Hi f. Mac,.

  Follow the steps in the article.

  How to troubleshoot sound problems in Windows XP

  No sound in Windows

• I can't install or uninstall anything. It telling me that my computer is in safe mode (which is not the case) or my windows installer is not installed properly.

  The Windows Installer

  I have windows xp. I can't install or uninstall anything. It telling me that my computer is in safe mode (which is not the case) or my windows installer is not installed properly. I know that my Installer is 'stopped '. I tried all the steps on the Microsoft technical support. As well as other sites in an attempt to solve this problem. I tried to subscribe, unsubscribe, launches the present, which, in respect of the CDM, run something HIKEY... all, you name it. I tried to download the latest installer, that didn't work... What the devil is left to try?

  Hello

  -What you have done to try to solve the problem?
  -Did you change on your computer due to which the question has begun?

  I recommend you follow the steps in this article and see if the problem still occurs.

  How to solve the problems when you install or uninstall programs on a Windows computer.