Workstation guarantee

Similar Questions

• HP Z620: Problem of auxiliary graphic workstation HP Z620 pci-e power connectors

  I want to fit my new GPU Z620 workstation card. I see that there are two auxiliary pci - e power connectors on the plastic support. I intend to use these two to put my new graphics card but I see potential problems.
  The problem is that in these two connectors pinout is not really to PCI-e spec. There are five female terminals to each 6 connector routes. The three terminals in the top row are crushed and two terminals downstairs is 12V. 6 cavity is empty in both connectors. As far as I know the PCI-e power connectors should have 12V power supplied to cavity n ° 4 and n ° 6 of cavity. What I have to manually change these two connectors pinout and move terminal 12V from cavity to cavity no.6 no.5 or there may be a few HP adapter that could solve this problem?

  connectors

  

  Only HP knows what HP has designed (and why) and as such, it cannot be assumed simply that a connector on a system is consistent with the 'standards' and not a "psudo owner" Connector (as seems to be the case with your PEG connector that is missing pin #3).

  Normally, a PEG 2 connector x 3 can provide 75W and as such, each 12V pin provides 1/3 of the power budget. This means that the HP "psydo owner" PEG connector, for lack of a better term, may not be able to supply 50W (if each ping is kept for the same current capabilities used in the standard 2 x 3 plug PEG).

  Then, this suggests the Z620 can only support a 175W graphics cards (with 75W of PCIe + 50W of each of the two 2 x 3 PEG connectors). Note that the standard allows graphics cards to 225W pulling 75W of the slot PCIe and 75W of each PEG 2 connector x 3!

  Thus, quantify this is to watch the quickspec for your Z620 and see what graphics cards are certified for use with your system. Then to know what cards are certified for your system, you can check what PEG connectors as appropriate are provided on these certified cards and also check what is their energy consumption. I would guess that all graphics cards that require more juice 175W has not been certified by HP...

  Since you say your card draws 165W, this budget of power seems OK during examination of the foregoing. So it should just be a matter of connect the two connectors of the PEG 2 x 3 and all should be well.

  However, it you want a card more powerful, purely based on the fact that a standard 2 x 4 connector PEG can power 150W using three-pin 12V, this would indicate that each pin can supply 50W. Assuming that the pins used in a conector of PEG 2 x 3 and 2 x 4 are the same, a 2 x 3 with only two pins 12V power connector could in theory provide 100W each. So you could in theory use a 275W card into the PCIe slot with your 2 psudo owner HP PEG connectors. BUT it means something to the pins themselves and that your HP power is up to the task (and can actually provide the necessary 275W power).

  And I would say that if you wanted a graphics 225W which is supported by standards, likley it would be a simple mod to the rider 12V among the pins for the vacancy that is normally used by the 3 pin (12V).  I'd be surprised if the block POWER HP of power and wiring could not handle the necessary extra 50W. But maybe it's a little too much for some who enjoy the guarantee.

  In any case, without owning a Z620, I would be comfortable in saying that you have no problem with this graphics card 165W and these exclusive hybrid psudo 2 x 3 PEG connectors as is

  (Heck, I don't got no problem with a 35W graphics card in a slot PCIe capable of 25W of my Dell T610 server that only supports the graphs via the inetgrated adapter)...

  But really, who knows why only two used HP pin 12V in their PEG connectors, maybe they used the best quality PINE and they were not sufficient for the cards, they chose to certify. Maybe save 2 cents for a less pin was a driving force... HP only knows what HP...

• Error: Cannot copy Admin$\system32\dwrcs.exe when trying to use DameWare NT Utilities card remote Commander for remote control a workstation.

  Original title: impossible to copy to Admin$\system32\dwrcs.exe.

  I'm using DameWare NT Utilities card remote Commander for remote control a workstation.   Other workstation remote control works fine.   On the workstation with the fact that I'm having the problem the following message appears:

  Cannot copy
  C:\Program Files\Dameware Development\Dameware control\DWRCS.exe mini remote

  TO

  \\workstation-name\ADMIN$\System32\DWRCS.exe

  System error: 5

  The system message:

  Access denied

  I don't think it's a matter of DameWare since other workstations are accessible.   I think that this could be a Windows problem with a kind of security.  Anyone know?

  Hello

  Your computer is connected to a server, or a domain?

  You can follow the steps in this link:

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Access denied messages when the connection to the remote PC

  If your computer is on a domain network, I'd recommend posting your query in the TechNet forums.

  Hope the helps of information.

• Starting from the standard a new workstation

  Like my suite CS5 has arrived, I guess it is now time to get down to work on the new workstation.

  I tried to follow all the different threads on new computers and components, including the guides of prejudice. As is obvious to everyone here for a long time, the material changes hourly. Here is the list that I propose to send to my constructor. I would be very open to all comments and criticisms.

  This may be the last workstation that I build, and it will be used for mounting, audio in Audition and some heavy Photoshop work, SD plus works in AE. I'll add HD and AVCHD can be, but I'm looking for inexpensive, although higher level formats. I'm not trying for a 'monster' machine, but that will be changed during a good 4-5 years, as my last job did.

  Then, I was some light work of 3D and opted for the nVidia Quadro FX 4500 card. It turned out be a great card, but too expensive for what I ended up using it for. Still, it works perfectly, but isn't CUDA compatible. Probably should have put that $ elsewhere, but still, the map has been flawless, so can't complain too much. I think passing on the Quadro this time.

  CPU - Intel Core i7 960 or 980 x

  MoBo - P6T WS Professional or higher

  RAM - 12 GB min but 24 GB wished, according to price

  Case - Lian Li Full Tower, or similar

  Fans - all possible and so by your RECS.

  PSU - Corsair HX 1000w, or similar

  Video - nVidia GTX - 480

  Controller - Areca w / built-in memory, RAID or equal

  HARD drives-

  Drive 0 640 GB Caviar black, or faster

  Disc 1 2 TB Caviar Black, or equivalent

  Player 2 2 TB Caviar Black, or equivalent

  3 RAID 0 2 x 2 TB Caviar black drive, or equal

  4 RAID 0 2 x 2 TB Caviar black drive, or equal

  Player 5 multi-disc LG, or equivalent

  Disc multi-Lecteur BD 6

  Audio - DD 5.1 capable SS

  OS - Win7 Pro

  Connectors:

  USB

  FW-400 IEEE-1394 has

  FW-800 IEEE-1394 b

  eSATA

  I am open to all suggestions.

  TIA,

  Hunt

  Hello

  Bill

  Some recomenadtions.

  CPU = 950 or 980 x

  Mobo = the mobo on your list is getting old now and really has 2 x pci - x slots that you will never use.

  Take a look at the range P6X58D, (me and Bill Gehrke use P6T7 WS Super)

  Memory = Kingston HyperX or Corsair Dominator 24Go Hex Kit

  Case = Lian li PC-A77F or PC - P80

  CPU Cooler = Noctua NH - 14 d or Corsair H70 with Arctic Silver paste

  Power supply: corsair or coolermaster 1000w modular

  RAID = Areca 1680ix or 1880ix with 2 GB or 4 GB of Ram and a battery backup.

  GPU = most gtx 480 are similar spec, the main difference is usually guaranteed. There are some models that are overclocked in standard.

  DRIVE HARD =

  Also look at the samsung F3.

  can you confirm how you want your installation to readers and they will be used for. in the form of a larger painting with raid 3 would be preferable to the media and to exports. rather than having a lot of samll tables.

  Baz

• I bought my Iphone7 United States, is it guaranteed in India?

  In fact I bought my phone at home I want to ask that is it is guaranteed in India

  No, the iPhone must be returned to the United States for repair or replacement.

• I want to buy ipad in the United States to use in India.   will be guaranteed will be honoured in India for ipad bought in the usa

  If I buy the air ipad 2 in the United States on thanks giving day and if I use the ipad in India will get a guarantee assistance in India.

  also is there any problems if I use, ipad, made in the USA, in India

  There should be no problem, as long as you use a single wireless device. If you want a connection wi - fi and cellular iPad, the guarantee would be specific to the United States. A wi - fi connection must have the guarantee honoured in India. This question may be better providers allowed in India.

• MacBook Pro 2014 - failure of the graphics card for the 2nd time in 2 years - no guarantee

  Hi all

  end of 2014, I bought a new 13 inch Retina Display MacBook Pro mid 2014 model (A1502, EMC2875). A few months later, the graphics card has failed - no obvious reason. Apple replaced. Now, the graphics card has not yet. Still, the mac worked perfectly well (no overheating of the noise, nothing) and all of a sudden - no understandable reason or external actions, the graphics card has failed. Unfortunately, I do not have a guarantee of more. At least, I can access my documents by connecting two Macs, so I hope that the material is not affected.

  My model (1502) apparently only has a single integrated graphics processor.

  My questions:

  • After some research, I discovered that Apple used to have these problems with the 2011 edition. They have implemented a replacement program. Does anyone know sth on this subject?
  • What graphics card would you recommend? How much such a graphics card? Where could I buy a cheap?

  Of course, I don't want to reuse the same type - guess I don't have to explain how @* #&! I'm after two times the same problem within two years after the purchase of a brand new MacBook Pro...

  I would appreciate any recommendations and links!

  Best regards

  Rahel

  -As you say, your Mac model uses the graphics processor integrated in the CPU chip. So, there are ios no replacement possible. The CPU is soldered to the logic board

  -The problem with the 2011 MacBook Pro was with the discreet Nvidia, not the graphics unit integrated in the CPU graphics unit.

  -When you went to an Apple store just says the genius of APple?

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop.

• If guaranteed iPhone bought abroad?

  If I buy an iPhone at an Apple Store in the United Kingdom but I live in Italy, where I need to make a warranty claim related to the 13-24 month which isn't covered more of the Apple international warranty period but only by the guarantee of the seller, can I expect this service from any Apple Store in EU or I come to the United Kingdom?

  Tnxs.

  The warranty of the iPhone is not and has never been international. 'Exception', if you want to call it that, is phones purchased in the EU, which is considered to be a single country for the purposes of warranty and service.

  No idea how Brexit will affect this. I've not seen or heard any statement from Apple about this yet.

• Is there a guarantee after replacement?

  Hello Apple fans - I'm too anyway,

  I would like to know your opinion if apple guarantees the replacement free of charge after that I have replaced my video card for the same after 3-month maintenance / repair warranty service Apple provides also? It's quite strange that I have to pay 700 EUROS according to my service provider local to apple for technology HW old and does not work both to the risk of having again directly after these 3 months to pay more than 700 EUROS to replace another. Is it possible that Apple for these cases to arrange repair futures than any other service?

  Sincere friendships and Thx for your suggestions,

  Alfons Salden

  Alfons,

  You should be in touch with Apple about your question. It is an international forum and policy to your topic may be country-specific.

• Hi all, I bought apple phone I 5s recently is the power button / stop does not. Bought in the United States, but I was shifted to the India, the works of will to guarantee in India please help

  Hi all, I bought apple phone I 5s recently is the power button / stop does not. Bought in the United States, but I was shifted to the India, the works of will to guarantee in India please help

  Ask an authorized service provider regarding iPhones, a guarantee of a country may or may not be honored in another function where you take the device.

  (143868)

• If I pay for an application and it does not work I would get my money back guarantee, please, thank you

  If I pay for an application and it does not work I would get my money back guarantee, please, thank you

  This is a user to user forum. You don't talk to Apple.

  You can report a problem with applications to http://reportaproblem.apple.com and request a refund as well.

• Installing TB31.3.0 on a W8.1 workstation; I want to delete the messages on the user agent of TB, but prevent deletion on the server. Where is the switch? When to install

  Hello!

  I have already installed a TB user agent on my workstation 'primary': I can create, read, and DELETE messages ON the workstation and the server.
  I want now to install a user of TB on a "secondary" workstation agent, where I can create, read and DELETE messages on the workstation. But I don't want the secondary workstation to delete messages on the server. (In short: I want that the function "delete" ONLY allowed to my primary workstation).
  Is this possible? Where is the switch ON / OFF? (For example, this feature is available on the agent on my WindowsPhone).
  When I install it?

  Thanks for your support!
  Rgds
  Flamboyant

  Using Thunderbird on your second workstation - the only option would be to create a Pop email account
  so before you download anything, you must configure the account settings to "leave a copy on the server.

  Tools > account settings > account for Pop mail server settings.
  or
  Menu icon > Options > account settings > server settings

  • Letter: look for the e-news at startup
  • Letter: arrival of new messages every xx minutes
  • Select: automatically download new messages
  • Letter: Leave messages on the server '
  • Click OK

  E-mail POP accounts can only download the mail from the Inbox server.
  This will allow you to remove off the coast of the secondary workstation and leave it on the server.
  However, Pop cannot see or download other folders on the server: IMAP only can see other folders these are read remotely. But in IMAP because records are a same as server, removing in TB will remove also off server.

• A US iPhone will work in Australia, guaranteed?

  I amtravelling in the USA and the need to buy a new phone. A US iPhone will work in Australia and will be honored in Australia for repairs warranty it if necessary?

  It can work in Australia, but not all bands could be supported. Guaranteed for a phone US is valid in the United States. Band support can also count on the device you purchase.

• After the Server 5.1.5 upgrade network user cannot connect by most workstations

  Hi all

  Intro

  I upgraded one of my client of 10.6.8 Xserve server at El Capitan / app 5.1.5 server.

  The server is configured with the network homefolders and mobile homefolders. We also use PCS. The 10.6.8 configuration has worked perfectly and still doesn't work. But now it is time to move on.

  The upgrade process from was relatively smooth. I had to configure the interface network again, then check DNS (front / back) and I also had to re - install the SharePoint, including network sharepoint (via AFP) houses.

  Problem:

  Then, I started to test the connection as users of the network on client computers. I found that it was not possible to connect from most client computers.

  After entering the login credentials was refused immediately. As is the case when entering the incorrect credentials.

  On client computers, nothing has changed.

  Client computers running Yosemite 10.10.5 and some are running 10.6.8

  As soon as I reboot the Xserve 10.6.8 original that's all is back to normal.

  What does not work:

  Those who connect has worked well:

  • Mobile sync (on Unassigned Computers)

  • Log is as user network at home (on Unassigned Computers)

  • PCS worked fine. New settings have been made correctly. On all computers.

  • Automatically install some actions has worked well on all computers. It is a local administrator on the client computers. When connecting to the account, the network shares are mounted using PCS.

  • Resolution of the DNS of all client computers

  • DHCP works OK

  • Client computers running 10.6.8 seem to be not affected.

  At one point one of the workstations involved that did not work, started working.

  What I tried and not solve the problem:

  • Renew DHCP client

  • Removed liaison OD and put in place again

  • Trashed records managed preferences (these have been re-created correctly)

  Ideas on possible causes:

  The most logical causes of this behavior might be:

  (1) client computer cannot find the master OD.

  (2) the powers of negotiation fails.

  Since the Division of the OPPOSITION binding work, works PCS etc., the client computer is the master of the OD.

  The latter seems the cause more lickely. Ticketviewer does not show tickets. Ticketviewer by using the credentials of a user of OD manually requesting a TGT works very well.

  All advice is appreciated.

  Kind regards

  Nico

  Hi Nico,

  Maybe the problem is related to the AFP. Have you tried disabling AFP in Systempreferences and delete all shares. After this restart AFP and try to add shares again. Have a look at the access privileges. It is urgent to remove and re-add the userfolders on the server share.

  Good luck

  Peter.

• Feld and Volk iPhone there a guarantee?

  I think to buy an iPhone Feld and Volk 6s, but I don't know whether or not it will void the warranty. I've heard that now iPhone can match if I buy the Apple Watch, but is plated gold iPhone 6s void the warranty? One of the most expensive phones has any guarantee in this case if I drop the real diamond. https://www.naij.com/316374-the-worlds-10-most-expensive-mobile-phones.html

  Any warranty on device changed as it would be to any company has made some changes.  This kind of thing would immediately void the warranty of the manufacturer Apple standard one year.

  See http://feldvolk.com/en/feldvolk/faq