Workstation HP Z240 Tower: do not find where to connect them the WIFI adapter, I bought

Similar Questions

• Can not find drivers to connect to the iPhone Bluetooth

  Bluetooth

  I installed windows 7 sp1 on a dell inspiron 1520. Can't find drivers to twin with devices such as my iPhone.

  Can someone please tell me a solution?

  Keith

  Depending on what you're trying to do with the iPhone, it cannot be a driver problem.  By Apple design, the connectivity of the iPhone to a computer (Apple or Windows) via bluetooth is extremely limited.  The iPhone does not currently support the synchronization or file or photo transfer to a computer via bluetooth.  It only supports data cell sharing internet connection with the pc to the phone and it is only in certain countries with certain companies and a possible additional fee to the carrier.  Sync and photo transfer is only via iCloud, USB cable, or with iOS 5 and later via wifi if the pc and the telephone are on the same router.

• My toolbars disappeared and I can not find where to add them.

  My FF update itself today. Only, I my address bar and have gotten back my Roboform toolbar. I can open them from the bookmark icon, but I want to add the toolbar that allows me to open my favorites here and I can not even find the drop-down menu that allows me to see what toolbars are active. Whew this 30.0 caused me headaches today! Thanks in advance.

  Or if your tab bar is so full that there is no empty space, you can:

  • Click the "+" button on the tab bar
  • Press the Alt key to display the classic menu bar: View menu > toolbars
  • button '3-bar' menu > customize > show/hide toolbars

• to format my drive c on a HP, but if you use it it will not let you do, tried to do to upwards, but not all can not find where I can format the c: drive, I have a d drive which is the recovery disk

  computer continue to close and go to the blue screen, lose the date and time all sorts of things

  http://welcome.HP.com/country/us/en/contact_us.html

  Contact HP for information about their recovery process.

  Here are the General News:

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  See you soon.

  Mick Murphy - Microsoft partner

• I opened a word from Windows Mail document, changed using Word 2007, you press on save and close the document. Now I can not find where he saved.

  original title: Windows Mail ate my file

  I opened a word from Windows Mail document, changed using Word 2007, you press on save and close the document.  Now I can not find where he saved.  I tried the search function in Vista, but it can not find the file either.  I tried to re - open the file in the email, but I just get the original version.  Can anyone suggest where it might be?

  Thank you very much

  Eamonn

  Once you open a Word attachment in an email, you must save it to your HARD drive until you make changes. If you do not, the changes are lost, but the original attachment is still with the e-mail.

• I continue to hear the chime exclamation in windows 7, but can not find where or why its carillon every bit of time

  today I heard this low chime from my speakers and can not understand why its happening.  I am running windows 7 and have checked my Kaspersky and unmarked notifications for DO NOT give sound advice.

  It happens every little bit, but can not find where the problem is.  I went to system sounds and it is the sound effect of exclamation.

  can someone help me please?

  Thank you
  the southern Belle

  Hello

  You will remember to do recent changes on the computer before this problem?

  I suggest you to check the status of the driver in Device Manager. Follow these steps:

  a. click Start, type Device Manager in the Start Search box and press ENTER.

  b. click continue. The Device Manager dialog box appears.

  c. If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  d. in the device managementr check the status of the driver.

  You can also view the error messages display event logs. Follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

• I had to reset my computer and now I am unable to install Photoshop elements 12.0. I have the record, but can not find where to install

  I had to reset my computer and now I am unable to install Photoshop elements 12.0. I have the record, but can not find where to install

  Hello

  Please Photoshop elements help | Download Photoshop Elements | 10, 11, 12, 13

  Hope that helps!

  Kind regards

  Sheena

• I just bought the photography package, hoping that it would be more storage for backup, etc. in CC. And now I can not even find where to buy them more storage cloud, the 2gig won't be enough for me.

  I just bought the photography package, hoping that it would be more storage for backup, etc. in CC. And now I can not even find where to buy them more storage cloud, the 2gig won't be enough for me. Where can I buy more storage?

  Currently, there is no option to purchase additional storage through the creative cloud.

• I have 10 items.  I'm trying to update camera raw plug so it will read the first lines of a 7dmarkii shot. I can't find where to put them to update to the latest version of 8.7.  If someone could please point me in the right direction.  Thank you very muc

  I have 10 items.  I'm trying to update camera raw plug so it will read the first lines of a 7dmarkii shot. I can't find where to put them to update to the latest version of 8.7.  If someone could please point me in the right direction, I would really appreciate it!

  Normally, I shoot with the 7dmarki and have never had any problems.  After troubleshooting my error message 'cannot open IMG1111 because it's the wrong file type', only the options have been updated plugin raw from the camera, to buy the latest version or uninstall and reinstall.  First train to the plugin to update because it was a leased device.  Thanks again!

  Thanks MichelBParis!  I didn't see where he said to 12 items.  I downloaded the free DNG Converter last night and not had much luck.  It is not recognizing that I have all files in the folder at all.  Don't know what I'm doing wrong!

• I have IE to Mozilla Firefox password and can not find that my internet registered the username and passwords. Help, please!

  I have IE to Mozilla Firefox password and can not find that my internet registered the username and passwords.  Help, please!

  Tools > options > Security > passwords saved...

• Could not find an appropriate interface for the private interconnection range

  I'm going to install RAC 11.2.0.2 on two nodes REDHAT linux.
  
  I ran runcluvfy pre crsinst, he gave me warning as follows:
  Could not find an appropriate interface for the private interconnection range.
  
  I asked her to use a different subnet as public interconnection for interconnecting private as well as the name / etc/hosts also set private ip addresses. Private ip address is not defined in the DNS system.
  
  .runInstaller also not will pop up the Ethernet because private interconnection over choice of network.
  
  What to do to solve this problem?
  
  Thanks in advance.

  You can temporarily change the mask of 255.255.255.0 on eth3 and see if YES recognizes eth3?

• iPad does not connect to the Wifi on the range 192.168.0. *.

  I have an iPad Mini (ME860BA) on os 9.3.1 that would not connect to my wifi at home.  He began to abandon their studies repeatedly a few months before and then just wouldn't connect at all.  It is on the os 9.3 so I upgraded to 9.3.1 but it did not help.  I was able to connect using a hotspot from my phone but no go on the real wifi. Sometimes it seems impossible to connect and others it seems to connect but without the wifi icon that appear (and internet access). All other devices connect to the House without exception (or question) - it's just my iPad.

  I followed every bit of advice I've found - turning wifi off & on, forgetting network, reset all the network settings, hard reboot, reboot normal, turning airplane mode turn off again, go up the brightness of the screen (odd) and finally I restored my router and the iPad to factory settings.  Nothing worked, so I took him to a store of Apple and waiting for the genius to see me I thought I would try to connect to the wifi and it went all right!  I felt a little silly to start with but they still took a look and said that he had 'something' bad, but they didn't know what.  Their best guess was that it was something to do with password authentication because they are client wifi has no password.  I returned home and disabled the security mode of the router - I have a Virgin Superhub running the 2.4 and 5 GHz primary wireless networks - no amount of adjusting the security modes (remove the password, make visible SSID, change of Protocol) makes all the difference.  However, knowing that it worked on wifi from Apple in the store, I was really puzzled.

  After ages bother with different parameters (especially in my router), I now know why it does not connect to home... My Virgin router to short on a range of address DHCP IP of 192.168. 0. * and my iPad suddenly won't connect unless the beach is 192.168. 1. * or higher.  (It connected OK for 2 years).  It took weeks to find this out, but at least now I can connect.  I turned on the wifi of comments because it uses the gamme.1.  Everything is good, connects the first time, every time!  I have not tried establishing a password (I was so happy, it connected I left because it was... well as I switch on the MAC filtering, for a little extra protection) I could try side password later and if it still connect, I'll update my post.

  My solution is very well when I'm at home but is not going to help if I get the iPad with me - it will be hit & miss if I can get the WiFi also.  Must be set correctly - I see no that it is hardware related, so there must be a bug in the software/firmware.

  Anyone having problems connecting to wifi can try the workaround network comments - at least it will get you.

  Is there a future fix for this?

  Re: iPad wifi suddenly does not save

  Change the range on the router you want to connect to.

• HP Deskjet 3055 A does not connect to the WIFI with security

  I'm trying to configure a Deskjet 3055 A on my DD - WRT router.  I am a highly qualified network engineer, so I don't know 100% what I'm doing.

  First, DD - WRT supports WPS connection, because these are very precarious.  This means that my only way to connect the pritner to my home network is to connect to my PC and use the Setup utility (downloaded from your page drivers) I use the 28.8 version.

  My router supports the 2.4 and 5 GHz and I know the printer is only 2.4 GHz.  I disabled completely the 5 GHz network in order to connect the printer, even though it shouldn't have any effect.

  I restarted my router and reset the printers wireless network using its integrated control panel.

  In any case, after a shameful 2 hours troubleshooting, I did discover that the printer WILL NOT CONNECT to the WIFI network if any security is applied against it.  It works 100% fine with open security however, it is totally unacceptable.

  I tried both WPA Personal and WPA2 Personal, both with the same effect.

  For reasons to try, I added also the printer to my network WIFI open and tried to manually change the setting WIFI via webinterface of printers, however, whenever I try and access the wireless configuration wizard, I simply get an error message saying "Internal system error" - eventually I managed to work around this another bug that has been there for years (see http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Internal-System-Error-prevents-access-t...

  After installing printers web interface WIFI, the problem is always the same and it does not connect.

  HP, we were in the order of 2500 of these printers for users of our remote site.  If you don't come to the top with a quick solution/bug fixed, consider the lost business!

  Concerning

  Ian

  After playing well, I managed to find a solution for this!

  For all users who are unable to find a solution by using the other methods, here's what to do.

  Change your local network to open the safe but note your WIFI settings for your default installation.

  Connect the printer to the open network the HP software (via USB cable)

  Go to the URL of the printer, but make sure that you connect through HTTPS - if you get an internal system error, keep refreshing until it works (WHAT A JOKE!)

  Click on 'Network', then click 'Advanced' on the left.

  Enter the network settings as they need to be secured.

  Downstairs, check "in an infrastructure network, use 802. 11b / g behavior (assuming that your assisted supports g, otherwise use the b only option), then click on apply.

  Turn on your wireless security, on your router and then the printer should connect!

  I am really confused as to why this is not automatically enabled, if the printer is not working with security on a Wireless N network wireless, then have this as the default!

  HP - feel free to thank me in this post!

• HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

  HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

  The battery is dead. When I try to turn on the laptop by plugging the AC adapter does not charge or led power LED does not turn on. But when I press the power button, the power, the indicator flashes and turns off (when power adapter connected).

  (1) I tried the press and holding the power button for 30 seconds after removing the battery & AC adapter / CC.

  (2) I tried to change the power adapter too.

  The problem is that it is.

  Your advice is very much appreciated.

  Thank you best regards &,.

  Zia

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  It seems that you are not able to turn on the laptop and tried to solve the problem

  Please perform steps listed to find out if it is a hardware or software problem below:

  1. remove all cables and devices, disconnect them and try to turn on the device

  2. check the LED light situation and ensure the action of the spring button / stop is normal

  3 Exchange with a well known power cord and the AC adapter

  4 Pack no adapters are available, check if the power adaptor is slightly warm

  Note: This will give us an indication that the power adapter could be good

  5. do you know if the laptop was in battery or power adapter when you used the last time

  Note: Make sure that there is no spill of liquid or cutting

  6. check if the Port of the AC adaptor is loose/broken

  Note: If the laptop is not on even with a power adapter well known, this confirms the hardware failure with the system board or power DC Circuit

  Hope this helps for other queries to answer the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• M177fw does not connect if the WiFi extender is activated

  Main WiFi router's CISCO E4200

  WiFi Extender is TP-LINK TL-WPA4220

  Printer is HP LaserJet MFP M177fw Pro

  Date of the firmware: 20130823

  Install Smart SW Version: 20/06/2013 1.0.13171.352

  Printer is in the same room as the CISCO router.  Extender is located in another part of the House.  Extension signal is low near the printer.  The Extender is turned off, the printer immediately connects to the WiFI network.  When the extension is enabled, the printer tries to connect several times and fails.  All computer iPhone, iPad, laptop and smart TV in room normally works with the CISCO and extension under voltage, but the HP printer does not work.  Is there something I can do to fix this?

  This has always been a problem with 2 AP make sure the router and the Extender are on different channels, like 1 & 6, 6 & 11, 1 & 11.   Where is the printer, set this AP to channel 1.  Try now.