Worsening of messages

Similar Questions

• When you select a message that was downloaded from Thurnderbird, the softward past mode of non-response for more than one minute before the message can be read.

  I am a user of seven years of Thunderbird. Three months after downloading successfully messages from my e-mail address, [email protected], I started having bad to select messages to read the content. Whenever I chose a message, the software entered into no answer mode as long as a minute or two. After this period, the message is selected and I could read the content. To try to solve this problem, I uninstalled the version of Thunderbird software I use and downloaded and installed a new version about two months ago. After that, the software works without problem as she had for seven years. However, since approximately two to four weeks after that I installed the latest version of the software, the problem of a selected message, pass in no answer mode started to happen again. It has worsened gradually until now I a not able to use the software. This problem applies only to the Inbox. The selection of messages into local folders properly.

  I have the same problem. I have subfolders, but have been using Thunderbird for many years and it was never a problem, although I had a similar problem a year or two ago due to a McAfee issue that was finally resolved. I usually less than 20 messages in my Inbox. I delete or remove messages every day.

• Windows Update not working do not Error Message and Windows Defender cannot update Error Message definitions

  I have a laptop Dell 1501 with Vista Home Basic 32-bit.

  I ran CA 2010 Security Suite and you have scanned for Malware with regard to the Windows Update Error Message. He found none. I ran Microsoft Malware malicious tool, and it found. I ran Windows Defender and he found. I don't have CA and Windows Firewall to protect my computer and I have disabled both in trying to solve this problem of Windows Update and Windows Defender.

  I got this error 4 days ago. Here is what I tried:

  -I went on various Web sites, including Microsoft Support - and tried to solve the problem through services.msc and msconfig.exe. None worked.

  -J' noticed in msconfig. where it says start waiting next to Windows Update. There are 3-4 elements, which are affiliated to Windows Update and made sure they did not exist in the registry.

  -J' have to ensure that they were supposed to be automatic or manual under services.msc.

  -J' rebooted several times and nothing changes.

  Windows Defender does not update the definitions, and I do not know if this coincides with the release of Windows does not.

  I am at my wit's end and do not want to crash and burn my computer.

  I need serious help. Please, I beg you!

  Thank you.

  LRR100

  I had to call Microsoft. Alex tried to add registry keys and input upgrade.

  My Windows Update has almost been altered. It could be my mistake or it has become corrupted when running other services at the same time.

  I was sent a Windows 7 Home Premium Disc to upgrade and start over, as my Vista disk was corrupted as well.

  I would not recommend trying one of the suggestions listed on other sites. It's my personal opinion because I have in the past and it worsened my problem.

  I also wouldn't delete all programs (unless absolutely necessary) because I remove 4 MSMXL and he made their work more difficult.

  ________________________________________________________________________________________________________________________________

  Sometimes the only solution is to call Microsoft and they will evaluate if a charge of telephone support is necessary from the outset, before they run for your problem.

  Despite what you may have read, Microsoft Technical Support technicians are very efficient and kind.

  We inform you to open a slot during your day or even open your day for the problem to be solved.

  Mine took 2 1/2 hours, and they had to remind me the next day to make the order for the disk because it could not be done the same day.

  The more patient and kind you are, the best representative.

  Hope this helps and thanks for reading,.

  LRR100

• Error message trying to update Windows xp sp3

  I just do a fresh install of windows Xp sp3 replacement, that I got from Microsoft. I tried to update to windows, as I do when I reinstall windows and got the error message "the site has encountered a problem and cannot display the page you are trying to view. This is the first time I met it with this drive. Usually, this is no problem at all. I tried to go through various corrections on this site but there are several and I think I did more harm than good. I just reinstalled windows again, try to update and received the same error message.

  I hope that someone can walk me through this time and end up with the right solution.

  I just do a fresh install of windows Xp sp3 replacement, that I got from Microsoft. I tried to update to windows, as I do when I reinstall windows and got the error message "the site has encountered a problem and cannot display the page you are trying to view. This is the first time I met it with this drive. Usually, this is no problem at all. I tried to go through various corrections on this site but there are several and I think I did more harm than good. I just reinstalled windows again, try to update and received the same error message.

  I hope that someone can walk me through this time and end up with the right solution.

  [1] turn Off automatic updates and leave it off.  Disable the notification of screen nag is a problem to have automatic updates off the coast.

  If you have not installed IE8, IE8 install using the exe to install full version offline and the decline of downloading updates.

  [2] when you have Win XP SP3 and IE8, it will be a necessary file

  http://download.Microsoft.com/download/1/9/A/19A6AC47-9EA0-455F-B918-A44D25B5304C/IE8-WindowsXP-KB2898785-x86-enu.exe

  Install this update and then RESTART the computer before moving on to Windows Update.

  This should eliminate a known problem that manifested by blocking windows update to do research without end and CPU at 100%, what is happening unless the most recent monthly cumulative IE security update is already manually downloaded and installed.  Second Tuesday of each month, this will be a ritual to perform or windows update crashes.  This is caused by a problem with the site Web of windows update is not a problem with your computer. Microsoft is committed to solve the problem which has continued for months.  Promises, promises.  The genesis of the issue took place in the summer 2013 and has been reported in this community after the updates of August, when it was reported that the last cumulative update of security for September KB2870699 be downloaded and installed manually set the CPU of fortification to Windows Update.  The linked thread shows this being reported in September and a month the well-known universal question went from bad to worse, with the installation of the updated cumulative security for IE being the fix manually.  The problem has been compounded by a bad Microsoft Fix it tool that was linked by Microsoft as the fix for Windows Update problems, but the difficulty bad it tool would then instantly to corrupt the registry of a computer of the user and cause an additional problem that would make the BITS and the two stop work, worsening the problem instead of fix windows update problem.  971058 is the famous set and there are other iterations that have the same bad code and cause the corruption of the same register.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/automatic-updates-and-Svchost-100-CPU/0715db9f-01e0-484f-87ea-10eff88a3e2d?page=1

  The linked TechNet page

  http://TechNet.Microsoft.com/en-us/security/dn481339

  will give you a link to most recent monthly cumulative security for internet explore that you must manually download and install before you will not be able to access windows update

  https://TechNet.Microsoft.com/en-us/security/bulletin/MS13-097 is this month December 10

  Select the download that is necessary for your version of Internet Explorer and download and install it and restart your computer before you visit Windows Update to get other updates which will then become accessible, after the prior cumulative IE security update is downloaded and installed MANUALLY and the computer is RESTARTED.

  The steps above should solve the more obvious and certain to problem. However, there are two other known problems that may also arise and are common questions of interest as the extra aggravation.  The first issue is certain and the other 2 issues can also either or both be also present in the form of a complication.

  It often happens that the installation of SP3 will break the windows update feature by not properly installing the windows update agent.  An older version of the windows update agent can be downloaded and saved in the C directory and installed by an execution command.

  http://download.windowsupdate.com/v7/WindowsUpdate/redist/standalone/WindowsUpdateAgent30-x86.exe

  Update: a later version of windows update agent is available during one of these linked pages

  http://support.Microsoft.com/kb/943144

  http://support.Microsoft.com/kb/946928

  Start > run > C:\WindowsUpdateAgent30-x86.exe /wuforce

  Steps 1-4 or 5-8 alternatively should solve the problem with the windows update agent.

  http://www.ehow.com/how_7176381_microsoft-install-after-installing-SP3.html

  Here is an associated KB article which does not have the entire article on the causes

  http://support.Microsoft.com/kb/927891/en

  Another article linked here shows this is not a new issue, but has been perennial

  http://blogs.technet.com/b/asiasupp/archive/2007/05/29/automatic-update-causes-Svchost-exe-high-CPU.aspx

  To connect to Windows Update the old version of Windows update agent detects installed and the latest version will be installed after consenting to the ActiveX installation.

  If this does not resolve the problem with Windows Update, then troubleshooting must then attend an essential required service BITS called which may be dysfunctional and causing the problem.

  See this thread and response noted the response of Xircal.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/win-XP-Pro-SP3-update-does-not-start/a583105f-6a52-4d69-94ee-6fc3e2da3c8a

  BITS is a necessary process that was recently discovered to have been broken on many computers by a faulty Microsoft Fix it troubleshooting and repair tool.  Fix defective it also caused users of computers for months and the same programming coding error can exist in others not yet identified software provided by Microsoft.  A registry fix has been designed with this problem by a member of this community.

  http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/bits-error-1290-0x50a-following-updates/9457b57d-1cb4-49f8-b62b-7fc8b226ecca?page=7&msgId=3eda6593-d29b-4173-aa24-77838e21739a

  This is one of the many reported uses of third party 'repair utilities' successful

  http://www.philmorgan.NET/techie-tools/Windows-Update-bits-Background-Intelligent-Transfer-service-fix-batch-file-for-Windows-XP

  Here's another

  http://www.tweaking.com/content/page/windows_repair_all_in_one.html

• Receive the same e-mails on a continuous basis. I now have in my copies of six mailboxes of identical emails for a total of 305 messages.

  I have recently updated from vista to Windows Live Mail 2011, the problem is that I keep getting the same emails on a continuous and well I have delete the mail it back. I now have in my copies of six mailboxes of identical emails for a total of 305 messages. Even if I delete the same e-mails continue to come back. I reinstalled windows 2011 mail and the problem seems to have worsened. How this can be resolved. The same emails keep on coming and now total 353 emails.

  You are not using Windows Mail, you use Windows Live Mail.

  A question of Hotmail or Windows Live Mail?
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/have-a-Windows-Live-Mail-or-Hotmail-question/8bd31c48-d1a7-49D6-a08c-9069aaeba2e5

• iPhone save personalized answering machine message

  I forgot to go to save answering machine message on my iPhone 5 s
  Please help thanks in advance

  Go to the telephone-voice mail-> greeting >

• Mail is always "Download Messages".

  I noticed that Apple Mail is always "Download Messages".  This process will occur approximately every 10 minutes.  This is usually between 250 and 270 messages.  (screenshot)  However, there is no double or extra emails.  In addition, the number of downloaded emails usually does not change (perhaps by 1 or 2 later in the day).

  

  I have 4 email accounts in Mail, which are all Gmail accounts.  I went through each account settings and made sure they are all handled in the same way and have the same options are checked.

  I think I found the problem with account, because I tried with the right button and select "Take account offline" when I see that it starts to download the messages.  Once I have put offline, the download stops.  I tried to remove this suspected account and Add again, but it still does the same thing.  Any help would be appreciated!

  Hello and welcome to the communities of Apple support, ggerrits.

  If I understand your message just Mail on your Mac continues to show that it Downloads hundreds of mails every 10 minutes. I can certainly understand how she could become a nuisance to see permanently who warn even if no new messages are actually downloading. I'm happy to help him to stop appearing.

  You've done some excellent troubleshooting already to refine what e-mail account, what's happening with. The next thing that I recommend you do is to make sure that you run the version of OS X El Capitan, which should be 10.11.6. Using your Mac update, take a look at updating the software on your Mac. If you haven't done so already, I recommend also restart your Mac. Test the Mail after doing those two things.

  If the problem persists, follow these steps:

  1. With Mail open, select "Mail" in the upper left corner of your screen and select Preferences.
  2. Select the tab accounts.
  3. Select the e-mail account that you are having the problem with.
  4. Select the Advanced tab.
  5. Uncheck "automatically detect and manage account settings."

  Next, close and then restart Mail to see if you feel the same way.

  Thank you for using communities of Apple Support.

  Take care.

• Since the update for Sierra, contacts do not appear in Messages - just phone numbers.

  Since the update for Sierra, Messages no longer displays Contact names - only phone numbers.  No instructions on how to remedy this.  Ideas?

  Hello

  Go into the Contacts application and ensure that it uses the same account synchronization like the iPhone and other devices you may be using.

  Also check the part of the accounts of the Contacts application preferences and make sure that it's only using one account.

  

  21:34 on Friday. 7 October 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• How can I get the messages appear when sent even if my phone is locked. I only get messages across when I activate the phone

  How can I get the messages appear when sent even if my phone is locked. I only get messages across when I activate the phone

  Settings > Notifications > Messages > display on the lock screen

• Why do I get a message saying that my computer is not registered for me

  I show the icon of the application that will not download because I get a message that says my computer it is not mine or is not saved for me.  WHY!

  What is the EXACT message you get?

• Messages will not open since macOS installation Sierra

  Hey all!

  I'm on a 2015 13 "Macbook Pro, only had it for a few months and have had no problems with it." Since the update, my Messages app will not work. Always worked well in the past, attempted to restart remove them the dock and everything but it wont open. Sometimes it loads a blank slate, but when I try to send a message it freezes and that he never sends. Every now and then, hours after the fact, I might have a new notification text top-right, but I am unable to open it.

  Safe Mode boot deletes some caches system that can help you and to update.

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Then, try the messaging app.

• How do you prevent Siri to send text messages?

  My children told me just show a problem with my iPhone 6 and Siri:

  My phone is locked, my child picks up the phone, press the home button and said "Send by David SMS", Siri let him write a voice message: "what is your social security number?   Siri sends, my other child shows me it seems I just send the message from my iPhone.

  David sends what looks like his social security number (it is not, we test all this), and the message appears on my locked iPhone.

  So if I left my phone sitting around, everyone could use Siri to do things like this for the information of anyone in my Contacts, even though I have a 6-digit code and fingerprints id put in place.

  What settings I need to change on my iPhone 6 to ensure that ever happening?

  Where they have found out about this: http://www.liveleak.com/view?i=c73_1475783202

  Post edited by: Phlac - add source my children found.

  Disable Siri "access on the lock screen.

  Settings > Siri

• How can I connect to a wifi network when I get the message 'safety recommendation' when I try to join?

  I have problems connecting to the WiFi at the hotel, as I have upgraded to iOS 10. When I try to join, I get a message "safety recommendation", and then it does nothing else. Prior to the update of the iOS, it would open an another Popup screen that lets me enter the password for the hotel but is not past with iOS 10. How do go?

  Please read use captives Wi - Fi networks on your iPhone, iPad or iPod touch - Apple Support.

  You may need to deselect Auto-Join and/or auto-connect on some networks in captivity. Otherwise, it may seem to connect for a second or two, only to disconnect immediately, leaving you without the possibility to open a session.

• All Gmail messages in subfolders missing

  I am using Mail version 10.0 on my iMac 27 inch 2015 Retina Display.  For some unknown reason, all the messages that I saved in these subfolders created self disappeared! The files are there but the messages are not. I used El Capitan, and have recently updated for Sierra, but the problem persists. The messages on my iPad, iPhone and Gmail.com. Any help would be appreciated.

  Hey Bitugs,

  Thank you for being a part of the communities of Apple Support.

  I understand your post inside files in your Gmail messages do not appear in the Mail on your Mac application, but they're appearing on your other devices and webmail.  To begin to solve this problem, I would rebuild you please your boxes mail:

  Mail for Mac: rebuild the mailboxes

  Take care.

• Messages: number, bad name right

  I just backed up my iPhone with iTunes 6 and restored my iPhone 7 from the back-up. Now, when I get a text message, it shows that it came from the phone number right but it displays the name of another contact. When I go to contacts, numbers and names are correct. How is what is happening and how to fix it?

  Problem solved:

  When you start the new phone he kept stuck on my iCloud password so I jumped this option. When the phone started, my iCloud showed I was connected and all my contacts were correct. I disconnected icloud, removed from the contacts to the new phone and re-connected to iCloud. Problem solved.