Would this workflow to accelerate the multi cam editing work?

Similar Questions

• Multi camera editing workflow

  Hello world

  IM working on my first camera multi edit, after the shooting of a school with 4 cameras and 1 audio recorder concert. I synchronized them using plural eyes.

  I also know how to change in multicam - excellent videos available on the net.

  My question is, as the convert 1 HR 15 minutes, I do not want to run the multi camera monitor and change it to a full 1 hour 15 minutes, I can't do

  errors. Is there a way to do this in steps without having to split the project into a number of sequences?

  I know how manual edit, but obvoiusly it will take time for a 1 h 15 min run.

  Thank you very much

  Chris Anderson

  Hang on, I thought you said that online videos have been excellent!

  Do not change the blocking real-time sequences!  With the multicam sequence and the monitor, both open, you can switch between the two and use the tool rolling Edit (N) in the sequence to change the changes that you want to take sooner or later.

  You can do this as many times as you like until you are happy with it.

• Need help with multi-camera editing in first Pro CC/7.0

  I use 6.0 for a while now and had to install 7.0/cc, but now I can't find where to save the changes to multi-cames.  I have aligned my clips and created a new sequence and consistent multi-cam, I do not see the multi-Cam Editor.  Help, please!

  Hello

  The record button is virtue even menu button. Please add it to the section button in the program monitor.

  Kind regards

  Vinay

• A camera view several Clips, multi-cam Edit

  Hello everyone, in CS6...

  I have three views of camera, composed of several clips.

  Camera 1 is 7 clips

  Camera 2 is 5 clips

  Camera 3 is 7 clips

  Can I align them track by track and make 1 track video camera 1 video camera Track 2 2 & 3 track video camera 3?

  How can I carry out mounting multi-cameras with these?

  Thank you.

  You can create a sequence source multicamera and add clips afterwards. That's how I'd do.

  1. In the project Panel, select the first clip for all three angles.
  2. Right-click, choose Create Sequence of Source blocking
  3. Right-click on the Source making sequence and choose > open in the timeline
  4. When the sequence is open in the timeline panel, modify the remaining clips for their respective titles.
  5. In the multicamera target sequence, run the blocking editing session, as you would normally.

  I hope this helps.

• Installed the latest important updates this morning; upon restart, the computer didn't work as expected. now behaves as if the motherboard is dead.

  This morning at appx. 1:30 AM PST, I installed the latest important updates from the Windows Update Manager on my HP Pavilion dv6000 laptop. I did manually, by a double click on the little icon in the toolbar and clicking on the button install. Once the update had completed, I clicked on the "restart later" button and close my computer using the Shut Down command - the usual symbol "click here to close and complete the installation" didn't appear. I thought it was a little weird, but chalked it up to the fact that I had taken the lead and made the installation.

  About an hour and a half later, after being able to get to sleep, I decided that I would try to do a job. I pressed the power button and my computer started well upward, giving me the ' now install, update (1/3) [percentage] completed. Do not turn off your computer. "message. Which is quite normal, let him do his thing without turning it off.

  The update is completed and I am greeted by my office. Displays the logon to Gmail Notifier window, and that's when my problems began: I tried to move the arrow to disappear, and the arrow has not moved. The circle of "transformation" had, next to the arrow, so I thought it must be a minor hiccup. I've waited, waited and waited... But even after all of my normal startup programs loaded, my mouse has failed.

  Pressing the Windows key to open the menu start does not work, either; It was as if everything had been disconnected. After waiting a few minutes, I decide that maybe I just need to restart and, given that my keyboard was not working, I pressed and held the power button until the system off (I know, I know, it's a horrible thing to do).

  I waited a minute, and then you press the power button. The lights came on, the fan spun, but the screen remains black as if I did nothing. I waited, because my computer arrived in the past tried to give me an attack of apoplexy by hanging several screens, but... nothing. The fan spun, the light shone their beautiful blue, but that's all.

  The only thing I have changed or done differently was the updates, I have not dropped my computer; I've not spilled something on or in I have a Targus chill mat that I use religiously. I download attachments from people I don't know no/trust (I can't, my antivirus program deletes attachments in emails from spam); I use Firefox with NoScript and anti-ad; My AV/Antispyware/malware program is always up to date and six types of awesome and more.

  My system is Windows Vista Home Premium on an HP Pavilion dv6000. I have an AMD Turion 64 x 2 processor and a Nvidia mobile graphics card (I don't remember exactly who he is; I can't the specs). I don't have a DVD of restoration, for reasons that did not need explores right now. I had my phone on... Two years, I think. I'll have to double check.

  I can't start in safe mode, because I get nothing - no POST, no beeps, without bumps. The CD/DVD drive makes some noises, as he is looking for a drive (there isn't one in the drive), and that's it.

  I think I have to take someone and make them open and see what's the problem, but I appreciate any thoughts/ideas/opinions/assistance that anyone can give. Thank you for your time and attention.

  Alas, no, the screen seems to be fine. He had not been acting funny before that, in any case. I checked out, and the external monitor just went to sleep because there is no signal.

  Thanks for taking a peek anyway. I guess it's a workshop for me and my laptop.

  Birdy

• Multi-cam editing - switch cameras

  I am currently editing a multiple camera sequence, but a right click and select camera 1, camera 2, picture 3 in the Drop Down

  It takes time to scroll to the bottom of the drop-down list, and pass in the source window slows down the machine a little

  Is there a quicker way to switch?

  Even a keyboard shortcut would be useful...

  Thank you

  There are actually a multi-camera set view. You can add buttons to your monitor, the program for access to these or access the view with Shift + 0. If you click the sign icon at the bottom right of your program monitor, you can add recording and one button directly on his right to switch to the display of MC.

  To turn the cameras with a shortcut, you can press the number keys 1-9, and to cut the cameras during playback you can add Ctrl modifier to these keys. You can go into control panel shortcuts shortcuts keyboard and see what multi-cam already exist, and add your own commands that are not shortcuts already assigned to them.

• Complex issue of multi-camera editing

  I have a question of several camera.

  I have the following clips:

  1 video clip continues with audio

  24 with audio video clips taken at different times (from different angles and close ups) catches throughout continuous clip

  4-track mono mic that extend over the entire period (4 different microphones placed at various locations in the room)-they are defined as mono in the settings of the element.

  1 stereo audio clip which extends over the entire period of audio recorder separate

  When I create sequence multi-cam, audio-based, it does not complain and creates the element multi-cam.  However, when I put in a sequence, I have 26 audio tracks. Many of them are empty.  I have no audio at the beginning, although I see the video game.  The audio tracks I see seem to be all stereo, with his fate only one side.

  Is there any special way working to combine the sequence above in a multi-came track, where I can change camera angles that I prefer and then mix the audio based on who speak - IE spend an audio 7 sources and sometimes to mix some of them at different levels?

  Most of the videos I've seen does not appear to cover this level of complexity of clip, so really doesn't help.

  Any suggestions gratefully received!

  Thank you

  Dave

  What I do is manually synchronize everything in a sequence, then alt - select the video (and not audio), then right-click and embed the video tracks. Then right-click on this nested track and choose Activate/multi-cam. Now I can make multicamera on photo editing, and audio tracks are intact. I mix and remix audio to my heart's content.

  There are 2 drawbacks to this method, but for me they are tolerable. 1, you must get the synchronization just before you nest, otherwise it's a mess. 2, by balancing the sequence, you have to be sure to cut all the audio tracks at the same time to maintain synchronization.

• having trouble getting multi camera edit to work in cs5

  I was follow Premiere pro cs5 classroom in a book, trying to get a mutlicam to work. I breed clips and never get the screen of the multi device it shows multi cam is turned on but has only verified one camera. I tried to highlight all or only one or none before still no nesting editing screen. What I am doing wrong? all ideas

  Hey Dano,

  See if this video helps you:

  Thank you

  Kevin

• Adobe: Fix SPACEBAR cut in multi-camera editing!

  Dear Adobe,

  Please fix the BUG that makes a cut of your multiple camera sequence when you press the space bar!  It is extremely annoying!

  Thank you!

  The former FCP user

  -Ryan

  Hi Ryan,

  You must use Premiere Pro CS6, or earlier. We changed the behavior in first Pro CC. Now, he does not stop editing tool.

  It is suggested that you make all of your cuts on the fly without hitting the Stop. Then, go back with the tool rolling Edit to make adjustments. Hope that helps.

  Thank you

  Kevin

• Is this Microsoft Windows XP Professional x 64 edition works on a second generation core i7 processor?

  The Asus P8P67 Deluxe Motherboard will be a socket LGA 1155 with Intel P67 chipset with a second generation core i7 I want to run Windows 7 or Windows 8 (I am currently trying the beta version).  The reason for the x 64 Edition is due to the large amount of RAM it will support what someone has an answer?  Thank you.

  As long as the hardware manufacturers for any material that you plan to use have support/drivers for Windows XP; Yes.

  Insofar as the processor - Yes.

  Motherboard - Yes.

  So, as long as your other equipment (whatever they are) is still supported under Windows XP Professional 64-bit Edition, you should be fine.

• Multi camera editing & stuff

  I'm hoping to try something new if possible.

  I want to edit a sequence of camera multi registered as if it were a transmission live i.e. have "monitors" showing that the different synchronized video sources. I don't know if this is possible with Adobe (I have the master collection).

  If this is not possible is it someone could advise on the best way to edit from 4-5 camera set-up (the cameras are put in place and are unmaned meetings / events).

  As I write, I slip into a cople of simple questions. How to clean my hard drive of files old (my C: drive is quickly running out of space although all projects etc. should be stored on drive D :)? Is it possible to export to a similar encoded file that had been initially captured in a DV tape. A Tablet DV gives a rate of data too large to manage easily (300 Mbps) and MS DV is much smaller (3mbps) - the initial capture was a little less 40mbps.

  Thanks for any help you can offer

  Did not use AVCHD myself, I don't know, but what I read here you probably need to raid and divide into small pieces. the op, on the other hand, indicates that it is using 4 cameras dv. So I'm not sure that it must be a raid for this. But certainly separate readers for its media.

• Multi-cam edit: better format?

  I recorded a set of Christmas at the Church with four cameras. Both are HDV (1080 p, 29.97), one is DSLR (1080, 29.97) and one is AVCHD (1080 p, 29.97). I have the habit of shooting with HDV and DSLR, but AVCHD is new. What is the best format I can transcode AVCHD who will mesh well with the other formats be?

  If the film itself is 'bad', then the conversion will not help. If, however, you see a weird jerking/pulse/burst, it's probably because the resolution of reading is set at 1/2 instead of full. For AVCHD, this isn't a bad idea, especially if you go multicam - it probably lets you edit and keep your sanity. However, to confirm that the images are OK, set the resolution of reading in full and reading a few images or sequence; things must iron out a photo point, but you'll probably start getting a reading of stuttering. If playback remains smooth (temporally), go ahead and try to change completely.

  These settings are in the preview only program; they do not affect the output one way or another.

• Re: How to make the Web Cam to work on satellite C660?

  I have a satellite C660 with built-in webcam... How to make this work?
  Nothing on my lap top that looks remotely connected to it. I confess that I'm fairly new to all this, but not daft I.m :)

  Thanks in advance
  Karen

  Hi Karen

  How do you use the webcam?

  With Skype maybe?

• I have a dell 10mc, there is NO Digital Lock key, when I type in alpha it types digital, that this only happens on the internet, microsoft office works fine

  I have a dell mini 10, it has a key "fn" and F1 to F12, but none of them are a digital lock key.   When I type in the search bar in internet explorer, example: www.     I get 456 or 234 etc..    I can type in Notepad and cut and paste it into the search bar to go to a site, so I know that the problem is only when I'm on the internet.   I tried the system restore, but that did not help.   Can someone help me restore this?   Thank everyone, maphillips

  Hi maphillips,
   
  As this problem is hardware specific, I recommend contacting the manufacturer for this function or refer to the manual provided by the manufacturer.
   
  Here is the link to the manufacturer:
  http://en.community.Dell.com/

• Windows 7 this high utilization of the processor when nothing works

  I have a 30-40% CPU usage when nothing works I mean only windows is running. I just reinstalled windows 7. What can cause this?

  Look in the task manager what type of program is the cause. After you open the Task Manager, go to the process tab and click on show processes from all users, and then click the CPU header in the list sort by CPU usage to help identify the process.

  It may be useful to install an anti-virus program and run a full scan. Microsoft Security Essentials is free: http://www.microsoft.com/en-us/security_essentials/default.aspx