having trouble getting multi camera edit to work in cs5

Similar Questions

• Im having trouble getting my dual moniters to work

  works on my laptop but my mate is not

  Hi Pat,

  1. what happens when you try to use the second monitor? You receive messages or error codes?

  2 when was the last time it was working fine?

  3. did you of recent changes on the system?

  If you are using Windows 7, you can consult the following articles and check if it helps:

  Work and play better with multiple monitors

  Guided Help: Setup dual monitor is easy in Windows 7!

  You can also consult the computer manufacturer's website and try to update the latest version of the Chipset drivers and map display.

  Update drivers: recommended links

• Have a new Mac computer.  Does the migration of my old Mac, who will now be my backup. Having trouble getting my creative cloud running on the new Mac. Tried to download the CreativeCloud Installer, but still now working. How to make creative work Cloud

  Have a new Mac computer.  Does the migration of my old Mac, who will now be my backup. Having trouble getting my creative cloud running on the new Mac. I tried to download the installer of CreativeCloud but still does not work.

  How can I get Creative Cloud works on 2nd new computer please?

  Hello

  Please use the link below to completely remove the creative Cloud Desktop Application.

  Using creative cloud | Uninstall the creative cloud desktop application

  Hope this will help you.

  Kind regards

  Hervé Khare

• Having trouble getting Sony Vaio (Windows 7) to twin with Bose soundlink wireless

  Bluetooth

  Having trouble getting Sony Vaio running Windows 7 to fit with Bose soundlink wireless 591U.

  Can not find the necessary drivers

  Hello

  1 have you tried matching the laptop and the wireless audio link?

  2. What is the number of the model of the laptop?

  Method 1:

  Follow the link below and check if that helps.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  Follow the link below and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices (Applicable to Windows 7)

  I also suggest you to contact the manufacturer to get the required drivers for the device and install it.

  http://worldwide.Bose.com/ProductSupport/en/Web/SoundLink/page.html

  http://eSupport.Sony.com/us/Perl/select-System.pl?NOPROD=Yes&Director=home&MDL=59IU&1=3

  Automatically get recommended drivers and updates for your hardware

  http://Windows.Microsoft.com/VI-VN/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  I hope this helps!

• I can't get FSX gold edition to work more than 10 seconds!

  I can't edition FSX gold to work more than 10 seconds before the crash of the software. I reinstalled several times, even the demo we do the same thing! I get a message 'not compatible '. I tried all the settings in the compatibiliy box (inc by checking the box of the administrator), my system is Windows 7 home eI get FSX gold edition to work more than 10seconds before the crash of the software. I reinstalled several times, even the demo we do the same thing! I get a message 'not compatible '. I tried all settings in the box of compatibiliy (inc by checking the box of the administrator), my system is Windows 7 edition 64 family. the chip is an i5 3470 running at 3.2 GHz, 8 GB Ram, 1 TB hard drive card graph NVIDIA Gt650.

  Load FSX OK, but when it blocks it seems to block all e PC upwards. The answers would be welcome

  Hello

  FSX is very demanding in graphic design, it could be the laptop graphics card can not handle.

  As a work around you are trying to update the graphics card drivers is available from Nvidia.

  What is the source of the installation of the game? What is a downloaded file or CD?

  However, the question you posted would be better suited in the support of Microsoft Flight Simulator since we have a dedicated support for this; We offer that will also post your query using Flight Simulator for assistance:

  http://support.Microsoft.com/GP/games-for-Windows

  http://www.Microsoft.com/products/games/FSInsider/tips/pages/default.aspx

  Please report if you need assistance on issues related to Windows.

• Having trouble getting phone Motorola Razomax HD & Windows 7 PC to communicate via USB and DLNA

  Having trouble getting telephone & Windows 7 pc to communicate via USB and DLNA

  Original title: motorola razomax hd

  Hi Bill,

  You can read these articles and check if that helps.

  How can I use DLNA on my DROID RAZR MAXX HD HD? : https://motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/91160/p/30, 6720,8579/session/L3RpbWUvMTM2NjAzNjU0My9zaWQvV1NvZ2hObmw%3D

  Install a USB device: http://windows.microsoft.com/en-in/windows7/install-a-usb-device

  Stream your media to devices and computers using Windows Media Player: http://windows.microsoft.com/en-in/windows7/stream-your-media-to-devices-and-computers-using-windows-media-player

  For more help.

  https://Motorola-global-portal.custhelp.com/app/product_page/FAQs/p/30, 6720, 8579/p_country_code/US

  Additional information.

  Play: frequently asked questions: http://windows.microsoft.com/en-in/windows7/play-to-frequently-asked-questions

  Response with the State of the question and we will be happy to offer you our help.

• Would this workflow to accelerate the multi cam editing work?

  Hey, I work with a really terrible computer and use a couple of low-definition camcorders for multi-camera filming so far. The computer can do almost in front, and I am patient enough to work with her at the moment. I'm about to upgrade to HD camcorders and probably add a couple of cameras to the next bit of stems. This will certainly cause the multicamera editing grind to a halt, so I was hoping to come up with a bit of a workaround.

  Would the following work:

  1. Convert all HD streams down to low definition (including audio without decommissioning)
  2. Import and align the stream of low-def (sequence1)
  3. Run through shoot and choose the camera angles for the entire sequence (multi-cam)
  4. Replace low-def with original HD images (using the right-click-> "replace sequences... ("in the source window)
  5. export the multi-cam sequence.

  It is not important that the changes between the cameras are on exactly the same frame in two sets of video - just need to they are roughly the same second.

  Try your own workflow suggested for your self.

  It work fine but of course its a lot of time to create the proxy files and can be cumbersome in line with their return.

  Use some kind of TC in your workflow. for example, paste TC to your proxies.

• Complex issue of multi-camera editing

  I have a question of several camera.

  I have the following clips:

  1 video clip continues with audio

  24 with audio video clips taken at different times (from different angles and close ups) catches throughout continuous clip

  4-track mono mic that extend over the entire period (4 different microphones placed at various locations in the room)-they are defined as mono in the settings of the element.

  1 stereo audio clip which extends over the entire period of audio recorder separate

  When I create sequence multi-cam, audio-based, it does not complain and creates the element multi-cam.  However, when I put in a sequence, I have 26 audio tracks. Many of them are empty.  I have no audio at the beginning, although I see the video game.  The audio tracks I see seem to be all stereo, with his fate only one side.

  Is there any special way working to combine the sequence above in a multi-came track, where I can change camera angles that I prefer and then mix the audio based on who speak - IE spend an audio 7 sources and sometimes to mix some of them at different levels?

  Most of the videos I've seen does not appear to cover this level of complexity of clip, so really doesn't help.

  Any suggestions gratefully received!

  Thank you

  Dave

  What I do is manually synchronize everything in a sequence, then alt - select the video (and not audio), then right-click and embed the video tracks. Then right-click on this nested track and choose Activate/multi-cam. Now I can make multicamera on photo editing, and audio tracks are intact. I mix and remix audio to my heart's content.

  There are 2 drawbacks to this method, but for me they are tolerable. 1, you must get the synchronization just before you nest, otherwise it's a mess. 2, by balancing the sequence, you have to be sure to cut all the audio tracks at the same time to maintain synchronization.

• Multi camera editing workflow

  Hello world

  IM working on my first camera multi edit, after the shooting of a school with 4 cameras and 1 audio recorder concert. I synchronized them using plural eyes.

  I also know how to change in multicam - excellent videos available on the net.

  My question is, as the convert 1 HR 15 minutes, I do not want to run the multi camera monitor and change it to a full 1 hour 15 minutes, I can't do

  errors. Is there a way to do this in steps without having to split the project into a number of sequences?

  I know how manual edit, but obvoiusly it will take time for a 1 h 15 min run.

  Thank you very much

  Chris Anderson

  Hang on, I thought you said that online videos have been excellent!

  Do not change the blocking real-time sequences!  With the multicam sequence and the monitor, both open, you can switch between the two and use the tool rolling Edit (N) in the sequence to change the changes that you want to take sooner or later.

  You can do this as many times as you like until you are happy with it.

• Multi-cam editing - switch cameras

  I am currently editing a multiple camera sequence, but a right click and select camera 1, camera 2, picture 3 in the Drop Down

  It takes time to scroll to the bottom of the drop-down list, and pass in the source window slows down the machine a little

  Is there a quicker way to switch?

  Even a keyboard shortcut would be useful...

  Thank you

  There are actually a multi-camera set view. You can add buttons to your monitor, the program for access to these or access the view with Shift + 0. If you click the sign icon at the bottom right of your program monitor, you can add recording and one button directly on his right to switch to the display of MC.

  To turn the cameras with a shortcut, you can press the number keys 1-9, and to cut the cameras during playback you can add Ctrl modifier to these keys. You can go into control panel shortcuts shortcuts keyboard and see what multi-cam already exist, and add your own commands that are not shortcuts already assigned to them.

• A camera view several Clips, multi-cam Edit

  Hello everyone, in CS6...

  I have three views of camera, composed of several clips.

  Camera 1 is 7 clips

  Camera 2 is 5 clips

  Camera 3 is 7 clips

  Can I align them track by track and make 1 track video camera 1 video camera Track 2 2 & 3 track video camera 3?

  How can I carry out mounting multi-cameras with these?

  Thank you.

  You can create a sequence source multicamera and add clips afterwards. That's how I'd do.

  1. In the project Panel, select the first clip for all three angles.
  2. Right-click, choose Create Sequence of Source blocking
  3. Right-click on the Source making sequence and choose > open in the timeline
  4. When the sequence is open in the timeline panel, modify the remaining clips for their respective titles.
  5. In the multicamera target sequence, run the blocking editing session, as you would normally.

  I hope this helps.

• Hi, having trouble getting the installer of Creative Cloud 30 day trial to boot on my computer.

  Hi, I have trouble getting the installer of Creative Cloud 30 day trial to boot on my computer.  Here I did successfully about 3 days ago, but since then has picked up a virus.  I used system restore to restore my computer about 5 days, which was to remove the creative cloud and Photoshop.  Now I am trying to re - download creative cloud with no luck.  Any idea would be highly desirable. -Demian Arend

  Hello

  Sign out of your account... Uninstall... to run vacuuming...

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and prior to the relocation is necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

• Need help with multi-camera editing in first Pro CC/7.0

  I use 6.0 for a while now and had to install 7.0/cc, but now I can't find where to save the changes to multi-cames.  I have aligned my clips and created a new sequence and consistent multi-cam, I do not see the multi-Cam Editor.  Help, please!

  Hello

  The record button is virtue even menu button. Please add it to the section button in the program monitor.

  Kind regards

  Vinay

• Having trouble getting a job to run using Task Scheduler

  I'm using Oracle 11 g. I run a sql script that schedules a task:

  exec sys.dbms_scheduler.create_job( job_name => '"SYSTEM"."UCR"', job_type => 'EXECUTABLE', job_action => 'D:\UserCountReport\bin\ucr.bat', repeat_interval => 'FREQ=HOURLY;BYHOUR=3;BYMINUTE=0;BYSECOND=0',start_date => to_timestamp_tz('2011-07-21 US/Eastern', 'YYYY-MM-DD TZR'), job_class => 'DEFAULT_JOB_CLASS', auto_drop => FALSE,enabled => FALSE);
  exec sys.dbms_scheduler.set_attribute( name => '"SYSTEM"."UCR"',  attribute => 'job_weight',  value => 1);
  exec sys.dbms_scheduler.enable( '"SYSTEM"."UCR"' );
  commit;
  exit;

  When I am connected to the database, I run these commands:
  

  SQL> SELECT JOB_NAME, STATE, job_action, repeat_interval FROM DBA_SCHEDULER_JOBS
   where job_name='UCR';
  
  JOB_NAME
  --------------------------------------------------------------------------------
  
  STATE
  ---------------------------------------------
  JOB_ACTION
  --------------------------------------------------------------------------------
  
  REPEAT_INTERVAL
  --------------------------------------------------------------------------------
  
  UCR
  SCHEDULED
  C:\UserCountReport\bin\ucr.bat
  FREQ=HOURLY;BYHOUR=9;BYMINUTE=0;BYSECOND=0
  
  
  SQL> SELECT JOB_NAME, status FROM DBA_SCHEDULER_JOB_LOG where job_name = 'UCR';
  
  JOB_NAME
  --------------------------------------------------------------------------------
  
  STATUS
  --------------------------------------------------------------------------------
  
  UCR
  SUCCEEDED
  
  UCR
  SUCCEEDED
  
  UCR
  SUCCEEDED

  However, I get no sign that the work was performed while Oracle said that all tracks have managed. The batch file that work is supposed to run creates a file and wrote something to him. However, the file is not written. When I run the command prompt batch file, it runs correctly.
  
  I tried following the instructions here:
  Answers to "why my jobs are not running?
  
  However, all three of these commands return errors:

  SQL> select value from v$parameter where name='job_queue_processes';
  select value from v$parameter where name='job_queue_processes'
                    *
  ERROR at line 1:
  ORA-00942: table or view does not exist
  
  
  SQL> select count(*) from dba_scheduler_running_jobs;
  select count(*) from dba_scheduler_running_jobs
                       *
  ERROR at line 1:
  ORA-00942: table or view does not exist
  
  
  SQL> select count(*) from dba_jobs_running;
  select count(*) from dba_jobs_running
                       *
  ERROR at line 1:
  ORA-00942: table or view does not exist

  I tried several other commands in this list and I get errors as well.
  
  I'm not quite sure where to go here to solve this problem. Any help would be appreciated. Thank you.
  
  Published by: 874375 on July 22, 2011 09:14
  
  Published by: 874375 on July 22, 2011 09:18

  See the DBA_SCHEDULER_JOB_LOG view ADDITIONAL_INFO column.

  You can also read my post. You will need to provide the cmd.exe to the JOB_ACTION parameter, but the name of the script and other command line parameters (like "/ C") should be added as arguments.

  At least that's how I ran with it successfully in the past.

• Having trouble getting a Dlink DWL-G820 wireless bridge to work with wrt610n

  I'm trying to get a few dlink wireless bridges to work with wrt610n, but not having a chance.  I left Wrt610n router with the IP default '192.168.1.1' and configured accordingly bridges with addresses "192.168.1.xxx".

  Wireless bridges is not happy.  Any ideas?  Bridges have been working well when I was with the IPS "192.168.0.xxx" with wrt610n

  Sorry guys, the problem was the security setting wireless that I used on the WRT610N, not the addressing system.

  Sorry for the inconvenience.