Recovery the DM4 pavilion as a condition of factory, using the disk value

Similar Questions

• I can't start the recovery on my pavilion dv6

  I have the recovery DVD 4 and I used them once before and it worked indeed.now I want to restore my laptop, like when I bought it, I put the first DVD rebooted the unit pressed F11 put it says:

  "Unable to start windows. a recent hardware or software change might be the cause.to solve the problem:

  1. Insert your windows installation disc, and then restart your computer.

  2. choose your language settings, and then click "next".

  3. click on "repair your computer".

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance

  file \Boot\BCD

  situation: 0xc0000225

  Info: an error occurred trying to read the boot configuration data. »

  but I had not really changed my original windows 7 provided with the unit and had not put in the form of any partition

  Help, please! my laptop is very bad way

  When you press F11, it will try to run recovery on the hard drive.

  To start the recovery off the DVDs, put in the DVD, one disc and restart the PC

  Press F9 at reboot and make sure that the DVD drive is selected

  This starts the recovery from the disks rather than the hard drive

• Recovery problem HP Pavilion g6

  1-product number: A4C50EAR #UUW

  2. Windows 7 Home Premium 64

  I have HP Pavilion g6: A4C50EAR #UUW

  recently by mistake I formatted all were leaving them in Notepad, now I don't have any OS in Notepad

  How can I restore my drivers and real OS

  Help me please

  Hello

  There are two options available.

  1. you can order a set of replacement recovery disks using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).

  Order HP recovery disks.

  2 another option that you might consider is to create your own Windows 7 installation disc.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc you using another PC - just download the good Disk Image ( that must be the same version that originally came with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  These Images are clean and a very respected source, Digital River.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  You may need, additional drivers and software are here.

  Best regards

  DP - K

• My wife has an i5 to 2.3 GHz MacBook Pro early 2011 and it worked like a slug.  Ran disk utility and verified that the disk needs repair using recovery HD.  What does this lead and what is the risk of losing all the data is there?

  My wife has an i5 to 2.3 GHz MacBook Pro early 2011 and it worked like a slug.  Ran disk utility and verified that the disk needs repair using recovery HD.  What does this lead and what is the risk of losing all the data is there?

  Even if it is very slow, you must make a return upwards before the race "repair disk". The risk of data loss is minimal, but do it anyway: Save and run to repair the disk.

  As for what it implies - most of the time nothing more than simply sitting and waiting to do his thing.

• Laptop HP Pavilion TS 15: change boot order - using recovery media

  I'm having a problem with the use of the support of the recovery disks. 1st disk works perfectly, 74% in 2nd drive, said copy file fails. Recently, I replaced the HARD drive.  If I change the boot order to CD-ROM first, it will make a difference? Help!

  Hi@geegeesgirl,

  Welcome to the HP's Support Forums. Best platform for all kinds of solutions, tips and settings for your questions/problems.

  For the best experience on HP forum, see our Guide to HP Forums to learn more.

  Need help to install Windows. Is this fair?

  Thank you for sharing the details of the problem. I want to help you.

  The question seems to be for various reasons. I ask that you are looking for the following.

  • Check if all the disks are clean and there are has no scratches what so ever.

  Also, try the HP Diagnostics first on the hard drive to see it passes or fails. Use the link below to perform the diagnostics.

  http://HP.care/2bOrqZQ

  I hope this helps. Please update the State.

  Happy announcement.

  Resolv_S

  Happy to help you. I work for HP
  
  Please click on " ""Accept as Solution " " " if you feel my post solved your problem, it will help others find the solution.
  Click on the " Bravo Thumbs Up" " " to say 'Thank you' to help! "

• HARD does not work after changing the disk partitions recovery media creator

  Hello world

  After installing windoows 8.1 April major upgrade (win 8.1 presents as OEM), and have shrunk C partition to create a data partition "D", "Troubleshooting" option under advanced start menu is no longer available.

  Toshiba Recovery Media Creator does not work, too (it can not find any hard disk recovery partion).
  I got in the OEM recovery partition.
  I am also able to create a recovery using the Windows tool unit.
  You have no idea about it?

  Thank you very much!

  Hello

  Sorry to hear about all this. Unfortunately, you now have a big problem. I don't understand why you didn't create support of recovery before you started to change the factory settings, including to change the structure of the partitions of HARD drive.

  Mobile offered with factory settings a structure specific partitions and recovery recorded image is saved on the partition of drive specific and marked with invisible markers. These markers are visible for preinstalled Toshiba recovery media creator tool and when you start the tool can find points of reference and has full access to specific files.

  Unfortunately, after changing the original scores structure Toshiba tool cannot find these markers more and is not able to copy files from recovery media recovery. What you need now is the original recovery disk. Using this disk, you can install original recovery image and after doing this, you will have new factory settings.

  I know it sounds stupid now but you must order the original recovery disk and it can be done on https://backupmedia.toshiba.eu/landing.aspx

  If you have any other questions you are welcome.

• Laptop HP Pavilion TS 15: QUESTION IMPORTANT HERE-new HARD drive and recovery on HP Pavilion Notebook TS

  Is it true that once you replace a new hard drive for your laptop, the recovery media will never work because of a chip in the motherboard?  I got a wonderful help here, but I just read on another post, that once you replace the disk, your screwed because of a chip in the motherboard and only HP can fix it.  Did I just waste my time and my money? Please, please, someone help. Now I'm all confused, thank you very much.

  2nd recovery disc was defective. Receipt again. Everything is great. Nothing to do with the motherboard. Thanks to all supporters HP volunteers, your the BEST!

• Creating discs of recovery, says "the disk you inserted is not empty", but it is empty

  Windows Vista Home Premium, SP2. HP G60 laptop.

  I (finally) created recovery disks. When I insert a DVD - RW disc, I get an error message: "the disk you inserted is not empty. But it is empty. I tried to use disks formatted and unformatted, but no luck. What to do next? I don't want to try CD, because it'll take 17 of them (against 3 DVDs).

  Thank you

  Hello:

  You might want to try a DVD-R or DVD + R vice a DVD - RW.

  Paul

• Help! My MacBook goes to sleep when the disk (on the recovery partition) utility is running!

  Currently, my MacBook is initialized in the Lion recovery partition. I am running disk utility and try to reduce the main partition, so I can clone a smaller HD (Yes, still there is enough space on the smaller disk.) But I have a problem... my custody of Mac to go to sleep, resulting in a never-ending cycle of wake - sleep-cancellation. The progress bar is apparently stuck to half way through. I don't want to touch anything, for fear of making the disk unbootable. (Of course, it is possible that it is already in ruins, but...) But I also have other things to do; I want to stay here all day just to keep typing on the keyboard, move the mouse, etc, to keep my Mac awake.

  Never mind. Looks like disk utility is stuck, and nothing happened. After a reboot and a repair, the volume is OK, but not shrunk.

• Use of the recovery of the operating system of the disks on a Lenovo C365 all-in-One

  Hi, so yes, I had to order to allow me to re - install Windows 8.1 since a preview version of Windows 10 because my recovery partition has been messed up.

  I have no instructions on how to use the disk 6 if so I was wondering if you guys or girls would help me?

  Welcome to the community of Lenovo!

  The link I listed below will explain how to use the Lenovo recovery disks. \

  http://support.Lenovo.com/us/en/documents/ht075445

• Recovery for hp pavilion dv6-3141ee

  where can I find a recovery disc for my laptop... When my hard drive broke I does not have the recovery disks and lost their, there at - it a download link for the recovery discs?

  Hello

  There are no downloads for HP recovery disks, however, there are two options for you to consider.

  1. you can order a set of replacement recovery disks using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.

  Order HP recovery disks.

  2 another option that you might consider is to create your own Windows 7 installation disc.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium 64 - bit ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  These Images are clean and a very respected source (Digital River).

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  You may need, software and additional drivers meet you here.

  Best regards

  DP - K

• Pavilion p6 2408eb Desktop PC: cannot access the bios to boot from the disk

  Hello

  I have virus and spyware on my PC. I want to reinstall my drive c with windows 7 instead of 8.1 or at least perform a system recovery, but I can't boot from the drive.

  The only items on google I can find state I must disable secure boot and then enter the bios to set the boot order so it starts on the first disc.

  The problem is that my monitor is idle (power light flashes) when I try to enter the BIOS. I tried to type esc/f11/f1 or press del to enter bios but my monitor then is idle and never enters the BIOS or go to the windows start screen. If it recognizes clearly that I typed bios key because he won't go to the windows startup screen after that pressing said key.

  I also tried recovery windows and tool HP system recovery but at a certain point, it asks me to restart the pc and here again he is stuck at the idle monitor... I never see the start-up of the screen or the other, one that says "press x to enter the bios. My computer will always directly to the windows splash screen once I started.

  Any idea what I might try next?

  Hello

  Consult this publication article before attempting the downgrade of your PC to Windows 7. I have no recommemd making a downgrade on Windows 8 is superior to Windows 7.

  The default settings for the BIOS of your PC 8 version are: inherited and secure boot disabled.

  Erasing the CMOS memory will bring back the default values and then you should be able to start the Windows 7 installation media.

  This similar model PC will have Windows 7 drivers.

  If you have not created the external HP recovery media then you must order at HP if you decide to go back to Windows 8.

• Need recovery for HP Pavilion g6-1361ex

  I have a Pavlilion HP g series g6-1361ex laptop.

  OS: Windows 7 Home Basic 64-bit

  I lost my data recovery completely. Please tell where I can get the data recovery.

  I'm from Saudi Arabia.

  Hello

  Here are a few options.

  1. contact HP and see if you can order a set of replacement recovery disks - the link you need is below.

  Contact HP.

  2 if you are not able to order HP discs, here's another solution, that you could use.

  You can create your own family Windows 7 Edition installation disk basic 64-bit as follows.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC. However, it not there no download directly available for Windows 7 Home Basic Edition, so you'll need to download another version (one will do, but the link below is for Windows 7 Home Premium 64-bit - the source is Digital River).

  http://MSFT.digitalrivercontent.NET/win/X17-24209.ISO

  For the key on your label of COA to work, you must now use the method described in the following link to convert this ISO to an all-version Installer.

  http://www.SevenForums.com/tutorials/85813-Windows-7-universal-installation-disc-create.html

  Once that is done, use an application like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  You could possibly need for your laptop can be found, additional drivers and software here.

  Best regards

  DP - K

• Windows Phone, recovery tool is not installed in windows 7, says the hash value is missing

  Windows Phone, recovery tool is not installed in windows 7, says the hash value is missing. Whenever I try to install the windows phone recovery tool it does not install error

  0 x 80070003, system can't find the path or 0x800b0101, hash value is missing... Please help

  Hi Imran,

  Thanks for posting the query on Microsoft Community.

  I'm sorry to know that you can not install Windows Phone on Windows 7 recovery tool. The problem could be due to system files or software problem.

  Try to solve the problem by following the methods below.

  Method 1

  Try to run the patch from the link below and check if it helps.

  Error code 0 x 80070003 when a preference of group policy is applied on Windows 7 clients:

  http://support.Microsoft.com/kb/2904034

  If the problem persists, then go to method 2.

  Method 2

  Refer to suggestions provided by Vijay B responded on December 22, 2009.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/the-system-cannot-find-the-path-specified-error/dae5f759-B053-4a4a-87af-42e79f517631

  I hope this helps to solve the issue. If the problem persists, get back to us. We will be happy to help you.

• How to use the return value of TestComplete (using COM) as a variable in the conditional statement (for example loops) TestStand

  Hello

  I have setup a COM interface for TestStand (TS) to run some scripts in TestComplete (TC).  Normally, when TestComplete has finished executing the script, it returns a 0 or 1 to designate the success/failure during the TestStand step (step test for example String value).  It worked well.

  However, now I need TestComplete to regain a vaule (e.g. 32) TS and TS need to assess this value in a while statement. So if the TC value is 32, I would have some statement in TS ike:

  While (return value! = 30)

  Do something...

  Thank you

  Jigg,

  No, the program does not have a new thread.  It's just a single sequential thread. She called other sequential files, and that's all.

  I think I'll have some luck with the StationGlobal.  It seems to work (for example by setting the StationGlobal a single sequence file automatically updates the Stationglobal in another movie file, sort of like passing the reference value)

  Thank you!