WPD file system Volume driver does not (code 10)

Similar Questions

• WPD file system volume driver, card reader, code 10

  Used to have a Vista system to windows 7 update on top and the card reader has worked without any problems, in fact a full install of windows 7, the card reader appears four times (once for each location in the card reader) 'device cant start code 10' 'WPD file system volume driver. " If for example, I put a Memory stick card in the slot, he then shows up in my computer as a drive can be used to read and write from.

  The external USB card reader that I keep with my camera also has the same problem. This works perfectly on XP and Vista on this PC, the internal card reader used to be in this PC also worked great on XP and Vista as well as Windows 7 which has been installed on top of Vista.

  I checked for new drivers for the new card reader, are none for Windows 7, so there should not be any question here.

  Looks like I solved, went into computer management, the Manager disk and found that they were not in fact assigned to the card reader drive letters. Seed it when the media was designed, windows a drive letter assigned automatically, once the media was ejected from the letter assigned was swept away, this caused the WPD 10 error, so I manually set a drive letter for each location on the card reader all errors are now gone.

• (Code 31) "" device is the ' WPD file system Volume driver "-Windows cannot load the drivers"

  original title: in (under portable devices) Device Manager I get the following message. _ "the device is not working properly because Windows could not load the drivers required for this device. (Code 31) "" responding device is the "WPD file system Volume driver" _

  The Windows Event Viewer reports-

  Information - drivers have been installed successfully for device - driver Installation
  Information - it was not possible to access the device () after installing the drivers.
  Error code 0 x 80070651 - migration pilot

  I finally solved the above as follows;

  a reinstall the drivers of my motherboard chipset

  b, restart the PC

  c will unistalling and then remote control panel/system/Device Manager device possible (it is not possible to remove all)

  d PC restart and all devices removed in step C reinstall themselves automatically - restart the PC once the process is complete and the problem is solved

  PS the problem the appliance was a USB2 memory card reader

  Hope this works for you

• WPD file system Volume driver

  Every time my computer starts a window indicates that the WPD file system volume driver should be updated. I'm updating, but it continues to offer whenever I start my computer. How to stop and what is WPD?

  Hello

  Please read this thread:
  http://social.technet.Microsoft.com/forums/en/itprovistahardware/thread/afa881a1-1216-4c88-a1d8-f9add1827dc5 Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• SD card reader is identified as a WPD file system Volume driver and can not read SD cards.

  HP Pavilion Elite-110f desktop PC

  Windows 7 64 bit

  In the Device Manager "this device cannot start."

  Temporarily used MiniTool Patition Wizard repartition my SD card out of my Android phone. When I noticed the problem, I uninstalled the program. Disk management Windows see the SD card; Ubuntu see the SD card; Yet he does not appear in 'computer '. So I can't transfer files.

  I reinstalled all the drivers card drivers mother AMD and Alcor USB 2.0. Question remains.

  Solved by assigning the drive letter in disk management

• T420 W7 Base system device driver does not

  Hello

  After reinstalling W7 the lenovo Solution Center complained by saying that the system device driver does not work.

  I saw that the SD card reader was not working and so I covered the missing pilot was that one.

  The Lenovo page I downloaded the driver for the card Multi for W7 and T420 port. After installing the message disappeared and SD cards have been recognized correctly.

  However, after restarting the system, after some time, the message appeared again and the card reader no longer works.

  I have install again and the same happened. He worked and after restarting two has stopped working.

  If find this mysterious altogether. I wonder if anyone knows how to solve this problem.

  I managed to solve the problem. Just in case anyone has the same problem I explain here how I did, although I'm not sure that this solution is universal.

  1 install the drivers from the Lenovo site.

  2. once the system starts to complain from the Device Manager where it says "Base system device" with a question mark. Then disable this device but do not uninstall the driver.

  3 reboot and it will be fixed.

• W520 - Base system device driver does not

  Greetings.

  This morning at the start of my ThinkPad W520, the player no longer works. A glance in the (Windows 7, 64-bit) Device Manager shows the 'Base system device' and points out that "the drivers for this device are not installed." Trying to get Windows Installer natively drivers does not work. Some googling shows others with similar problems in the past; recommendations include installing a card reader driver Ricoh for Windows XP or Vista; It did not work. Other drivers available include 8ass82ww.exe and 8axv51ww.exe - these don't work. Installation of the own Support Center Lenovo software shows that the Base system device driver is not installed. I can't find a way to install it. I tried installing driver exe files and searching the same files using the browse-for-the window Windows files during the installation of the drivers for the Base system device.

  Seriously, * beep *? I lost more than two hours on Sunday morning trying to solve this problem. It worked yesterday. I did install new software crazy, or any software besides. Why this happens and more importantly, how can I FIX it?

  This morning, ran Windows automatic update; I don't know if the updates were designed to the card reader, but the driver is now installed and the operation of the device. Too many updates to list them all, but thank you all for your help. Between the time I opened this thread and now probably I rebooted my machine 30 times and tried all combinations of drivers + restart. Then, poof, this morning, it is fixed.

• Windows WPD - access denied file system Volume driver

  original title: Driver Windows WPD files Volume

  I just installed the Service Pack 2 of Vista for 64-bit system.  Now, I have a message looking for driver for my printer.  When I search for it, I get the message

  Refusal of access Windos WPD files Volume driver

  I just installed the Service Pack 2 of Vista for 64-bit system.  Now, I have a message looking for driver for my printer.  When I search for it, I get the message

  Refusal of access Windos WPD files Volume driver

  Support FREE from Microsoft for SP2:

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• My CD-ROM device driver does not (code 39). This happened after I restarted while trying to load Norton Antivirus on CD.

  I have a HL-DT-ST DVDRAM GH10 ATA Device of DVD and also a HL-DT-ST DVDRAM GE20LU10 USB device on my Windows Vista desktop - system.

  After the restart during installation of Norton Antivirus on CD, the ATA device failed to recognize the CD and Device Manager showed that the device driver for the two devices CD-ROM (System32\Drivers\cdrom.sys) was now not to load. (code 39). Device Manager indicates that it may be damaged or missing, but the driver is in place and date from 04/11/2009. Restart and try to upgrade the driver makes no difference, and he does not always load. All other device drivers work well.

  Kind regards

  Ian

  Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• CD-ROM/DVD-ROM drive does not work. Device Manager indicates problem and there is no volume listed on the Volumes, how to fix tab?

  Description of the drive is HL-DT-STDVD +-RW GSA - T11N ATA Device Properties. Verified drivers and they are up to date.  Under device status "this device cannot start. (Code 10) clicked on search the Solutions, but no solutions are shown.  Have trouble with the DVD because I had the computer and have had several conversations with Dell but I think that my extended warranty just expired.

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• Windows Media driver does not load code 10?

  anyone has this problem

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• CD/DVD drive does not work error Code 19 a dI have tried all the solutions of correction that I can find.

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  I tried Mr. Fixit, and I still keep getting the same message again and again... It was working fine, less then a month ago.

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Please make all underneath the same if you've done it before as it's often the total of the process which
  solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.

  Normally the above will solve this problem if not work your way down through them, even if you
  done before.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  --------------------------------------------------------------------------------------

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• my computer detects the usb pen, but when I try to send files to it in "send to" my hard drive does not appear.

  Usb detects the dvd player and my external hard drive, but does not detect my hard drive. I tried to disconnect the external hard drive, but still, it does not detect my hard drive. The drive letter is E: and pen usb H: external drive letter is F: HELP!

  When I try to send files to it in "send to" my hard drive does not appear

  What hard drive, external or internal? Normally only removable devices appear in the mailing list.

  You could use copy and paste instead, or see the following article...

  http://support.Microsoft.com/kb/310270

  .. how .to add items to send it to the list.

  Tricky

• CD DVD drive does not. Error code 10. Microsoft It planned is "fix.

  CD DVD rom does not.  Listed in Device Manager, with yellow warning sign, and when clicked, says Error Code 10.  Running Vista Edition Home Premium

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104
  Try the resolution on the following link:
  The CD drive or the DVD drive does not work as expected on a computer that is running Windows Vista
  http://support.Microsoft.com/kb/929461
  Also seethis discussion:
  FixIt did not work the first time
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/unable-to-write-to-DVD-drive-Windows-Vista/791d88ac-73b2-48da-a18c-723c0b08a587

• CD DVD drive does not recognize inserted the disc: Code 19

  Windows cannot start the CD-ROM/DVD-ROM device because its information configuration (in the registry) is incomplete or damaged (Code 19). The CD-ROM/DVD-ROM device is a: HL-DT-ST DVD - RAM GH40L ATA Device on an HP Pavilion Slimline

  Hello

  Here are a few articles that will probably solve your problem.
  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista

  http://support.Microsoft.com/kb/929461

  Your CD or DVD drive cannot read or write media - A Mr Fixit

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  When you insert a CD or a DVD, Windows Vista may not recognize the disc

  http://support.Microsoft.com/kb/939052

  Mark <> Microsoft Partner