Wrapped connections, and proxy sessions problem

Hello!

We went to Weblogic 10.3.5, and my impression is that the behavior of the wrappers of connection changed handling about proxy sessions.

We use the SecurityServicesJDBC to get a connection, which is a wrapper of the OracleConnection.
We then use the connection wrapper to log proxy with username and password to check if the given credentials are valid.

Very probably since the upgrade to 10.3.5 the password is ignored. Effect is that all users are connected successfully, regardless of passwords.

Workaround is to get the connection from the supplier of the package, and then open the proxy on this session.

I wonder why the wrapper removes the password and it does not pass. If there is a wrapper, shouldn't the method works like the same method on the connection to the seller?
It worked like a charm in 10.3.4 as far as I can tell. If something has changed in the wrappers?

Kind regards

Sascha

I think you mean wls 10.3.3 worked before. SO Yes, you want a patch for a bug recently found that WLS will swallow the exception.

Tags: Fusion Middleware

Similar Questions

  • WRT610N connection and network storage problems

    First of all, on my network, I have a wired under Vista Ultimate PC, a portable wireless g running XP Pro, a Wired VoIP PABT box, an iPhone, a g wireless Mediagate MG350HD media Extender connected to the TV in the living room (about 10 meters through the 3 wooden walls) and I have a drive hard usb connected to the WRT610N router.

    I spent only on tape 2.4 on the router - 5.0 band request the customer to have N Wireless anyway, since I have no devices N Wireless is no use right now?

    I use it to manage my network Network Magic.

    Problem #1.   My Mediagate MG350HD guard abandon it's connection to the network. I tried to use DHCP and static ip address for this but it falls again. The only solution I've found is to remove the Mediagate masked-out of the network adapter in the Network Magic, restart the router, click on "search new devices" in Network Magic and MOST of the time it will redetect and reconnect the Mediagate. Any ideas?

    Problem #2. Try to configure the network (my hardrive USB) storage device is a pain in the anus.

    In the storage routers tab I can't give a sense creating folder. All I want to do is to share specific folders and all their content on the network. Whenever I go to assign access rights and click on groups most in the access column and hit 'save' it puts back in the denied access column. This has something to with the permissions on my PC? When I go to network and sharing Center it now displays "Network Storage", when I click in 3 folders in network appear, when I try to set permissions on these folders, I hit apply and the boxes I just checked white-out again. The folder marked "Network Hard Drive" (the one I put in place using the storage tab in the router) does not show subfolders and the real movies stored on them.

    When I try to change the permissions on the using my PC, different folders, for example, movies, TV etc... I get the same cutting out of the tickboxes on 'apply '.

    Is there a step by step graphic instruction that I can follow other than the PDF file that came on the disc with the router. It was not very useful.

    As you try to share a storage network on your computer, its nothing to do with your Permission to computers. You must set the appropriate permissions on your router for this specific folder and set the read/write permissions, you will be able to access the storage on your computer and make the appropriate changes in it.

    Once you open a session to your Linksys router configuration page, click on the storage tab, then click on create share and you can select the folder you want to share on the network and give them read/write permissions.

    Once you're done, you can MAP the network drive on your computerand when you are prompted for the username and password you can try the username and the password that you set on your router on the storage tab. Once done after that, you will be able to make the changes.

  • iPod connection and synchronization problems classic160GB

    I have a well taken in charge iPod classic 160GB. Worked perfectly until...

    Since the upgrade to the latest OS (iMac), I've been prone to random error when updating of my music. Essentially (1) the device is still connected and there is no apparent way to perform a good ejection process (2) and synchronization fails after many hours and don't care only about 100 songs.

    Thus, it seems that the iPod is ok mechanically. I have reset the device and formatted the HARD drive. This allowed then the synchronization process works correctly. Yesterday I downloaded the songs on the iTunes store and wanted on the iPod - same problems error has occurred.

    Would it not make sense to go back to an earlier version of the operating system? and iTunes? (same iTunes appears unstable now...)

    I see that this timing issue is quite common with this unit holders and it seems to be common, because support was arrested for this camera - I'd be cynical? Why isn't Apple in the face of what it comes to very bad reputation management - total contempt for Affairs of its user base?

    I always use what is apparently a good piece of hardware, but I'm extremely frustrated as a user. Any body found the corrective action? If so, what is it?

    LAST: I left Apple and bought a Sony HD camera. Why? as a result of these frustrations. I'm now evaluate whether to consider other Apple devices that are close to replacement (viz, Ipad, MacBook Pro (17 "), iMAc) with non-Apple devices. This is how frustrated and I'm in a bad mood.

    Please, if you know a solution, I am very willing to try that.

    Problems with synchronization is often caused by a hard drive which becomes unreliable.  Hard drives are mechanical and ends by fail, computers and iPods.  I have much older iPods (4th gen, 3rd generation and iPod mini) that are more than 10 years at this point.  They still work perfectly fine with the latest version of OS X and iTunes.  I replaced the fragile hard drives in three of these iPods with Compact Flash card or an SD card on an adapter.  For the 5th generation and later iPods, you can look here for more information

    https://www.iFlash.xyz/

    I see that this synchronization problem is quite common with this unit-holders...

    It's not just 'common good' considering there are millions of iPods (with storage on hard disk) still serving there.  However, if you see more cases of these days, the reason is obvious.  They age, on average.  The iPod classic model was released back in 2007.  Old things tend to start fault for various reasons, including defective hard drive.

  • Problems with the internet connectivity and support

    I have a HP Pavilion Elite HPE-510y running Windows 7 service pack 1, 64-bit, and now I'm having problems with getting updates requiring internet to install. There is nothing wrong with the router of my family. I tried to put my desk right next to the router since I use a wireless connection, it did not work. Not even when I plugged the router it still didn't work. Diagnosis, troubleshooting and self-help does not identify the problems that are there. There is no sign of the virus. I tried toggling with the security, firewalls, options and reconnect to the internet. Nothing is fixed. Windows is unable to use the online services. Flash Adobe updates do not install limit I can watch YouTube amout. Norton Antivirus will not install updates with Liveupdate and difficulty of internet connectivity. I can't go through the itunes store. I can't even get the Microsoft Word dictionary. Whenever it is said, I don't have an internet connection, and I can always look up on the web, no matter how far I am. Cela and cannot load configuration error 8921-251 which. Windows updates always work for some reason any. I am at a total loss and spend nights trying to figure it out. I could really use some help.

    It seems that this Norton Security...

    «LiveUpdate_solved"in «Norton 360"»

    The article of the author "rab60" contains detailed instructions on the Live Update solution.

    You could try a more thorough search of Norton Community Forum... I do not use Norton and cannot comment on if none of the solutions work.

  • Remote Desktop connection has encountered a problem and must be nearby

    When printing a tag printing in internet explore from a server terminal server. I get the message "Remote Desktop connection has encountered a problem and needs to close". I get disconnected from the terminal server. I updated the file screwdriver as well as pilots of the printer. The printer is a HP3600.

    Hi Marcus,

    The question you have posted is related to the server terminal server and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.

    http://social.technet.Microsoft.com/forums/en/category/WindowsServer

  • Connection to printer Windows XP and Xerox 7132 problems

    I am running Windows XP, Windows Vista and Windows 7 on a network connected to a printer xerox 7132.  The XP machines will be able to send some documents before losing the connection.  I tried to remove and install but still the same problem each time.

    If anyone has had similar problems and know a fix?
    Hello by the way the Forum!

    Hello

    (1) did you nay recent Hardware / Software changes prior to this question?

    (2) you are able to print from other computers?

    (3) what is the exact error message while trying to print from XP computer?

    (4) how many computers are connected with the network?

    (5) the issue is with the printer or are you affected by network Windows XP problems?

    (6) did you check the printer connected locally to the computer?

    Check the city link FIXIT who may help you fixing the issue below.

    Method 1: Diagnose and automatically fix problems printing and printer

    http://support.Microsoft.com/mats/printing_problems/

    You can also try to download the latest drivers and update the Firmware that can help you.

    Method 2: WorkCentre 7132 support & drivers

    http://www.support.Xerox.com/support/WorkCentre-7132/downloads/enus.html?OperatingSystem=WinXP&fileLanguage=en

    Hope this information helps.

  • Netflix in Media Center returns a 'there was a problem of data recovery. "Check the works of your internet connection and try again" error instead of loading Netflix data.

    context: a previous thread with an identical title never responded, the problem just disappeared.  Well its been two weeks since then and the problem came back.

    somethings which may or may not apply: internet TV seems to work better in media center.  All updates have been applied to H.P. of Vista SP2. Netflix works fine in ie8 (such as the internet, of course). Tried to delete all the Internet Options, delete browsing history section of Internet Explorer. I get the same error message with my windows 7 professional media center, but netflix seems to play anyway (no game with vista). I recently installed quicktime alternative 2.72 to see what it was and how it worked, then removed and put back in quicktime.

    Tried / symptoms:

    -Remove all the browsing history (econcepts)
    -Same message on Win7pro but works even when (econcepts)
    -Works on Win7 no problem (omegafiler)
    -Works in ie 8 (econcepts)
    -Works in crome (Martin TX)
    -Consensus is that it started around December 30, 2009 (GeoffG1, johnetX, me)
    -Remove and reinstall silverlight (omegafiler)
    -Remove and replace netflix plugin (omegafiler)<- how="" did="" you="" do="" that="">
    -Netflix says: microsoft problem (Nitestalker)
    -Microsoft is silent (this thread - on vacation?)
    -Same problem on 32-bit and 64-bit VMC (JRSMiamiFL)
    -No applied update (johnetx)<- perhaps="" date="" related="" or="" drm="" date="">
    -Disconnect from netflix, you reconnect again - ultimately the same error (chicagokiwi)
    -Tried to reduce the number of items in the queues to well below the limit of 200 (econcepts)
    -Tried the register / unregister the third wire procedure, no joy (does not break anything else however)
    -Disabled the firewall, no change (econcepts)

    related topics:
    http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/0c154c0a-1fcb-4353-8c5e-b394e885256d

    http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/aaab24a0-4BB9-42FA-a5ee-46a733d6560f

    http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/f05f69c7-6456-4117-B302-27c08886ea1e

    Someone else knows Netflix not being is not able to connect?  It started yesterday (30/12/2009) for me.  I looked fine the day before without problem.  The message I get says "there was a problem of data recovery.  Check the works of your internet connection and try again. Ok.  I make it work with both my VMC - one with the service pack and the other without.  My OS updates have been loaded in early December, so I don't see how this could it be.  I searched and found this problem has come up before, but I have not found a solution.  I made NO changes to my HTPC.

    Those who have and solved this problem.

    UPDATE UPDATE UPDATE UPDATE UPDATE UPDATE *.

    2009-01-05 has attempted to start Netflix this morning and you know, it works on both my VMCs.  That's the good news.  So now the real questions are:

    Only 20 people reported it as a problem and only 6 on the green button.  I believe that it affected all the world with Media Center.  So why not discussed much?

    It already happened, causes a stir and silently slips without known cause or cure.  How can we find out what caused this and how to prevent it from happening again in the future?

    *******************************************************************************************

  • In the Internet properties and connections and the local network settings, I uncheck the box for a proxy server, but in a few moments, the computer checks the box

    In the Internet properties and connections and the local network settings, I uncheck the box for a proxy server (because it is blocking my access to Internet Explorer), but within moments, the computer checks the box. What can I do to stop the area of the check proxy server box?

    original title: LAN settings

    Have you checked for viruses?

    http://www.eset.com/us/online-scanner/

    It is very common that the virus to do.

  • Failed to load movies Netflix in Media Center message appears to indicate there was a problem of data recovery. Check the works of your internet connection and try again.

    Original title: cannot load Netflix movies in Media Center

    Netflix photo click on the message appears indicating a problem of data recovery.  Check the works of your internet connection and try again.

    Hi Barbarasimonetti,

    (1) since when are you facing this problem?

    (2) remember to make changes?

    (3) what is the complete error message you receive?

    Method 1: You can follow the steps described in the article below

    Known issues and limitations of Netflix on Windows Media Center for Windows Vista

    http://support.Microsoft.com/kb/972496

    Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer
    ***************************************************************************

  • Hang up during, connect and internet problems on laptop HP15-g019wm

    My portable computer product number HP15-g019wm F9H60UA #ABA has been suspended on the black welcome screen after logging about two minutes before opening on the desktop. My mozilla firefox is slow to open and does not connect to any websites other than the home page. It is upgraded to the latest version, when I first tried to open it and then it opens slowly. Google chrome opens quickly but then freezes when I try to go to another site. My computer is running windows 64 bit system 8.1. Anyone know what could be causing the issues off the phone and internet on my laptop? I was able to connect and browse the internet very well last night, and these problems just started to happen this afternoon. Any help would be appreciated.
    Thank you.
    Lynch10

    He seems to have been a problem during an update, as everything ran as usual on Sunday and continues to do so.
    Lynch10

  • BlackBerry smartphones "Blackberry App World is had problems to connect to the server Blackberry App World. "Check your network connections, and then try again.

    Whenever I try to access an application, appworld is a site of the company that send me to appworld I get this error.
    "Blackberry App World is had problems connecting to the server Blackberry App World. "Check your network connections, and then try again.

    I have loaded the bb appworld re have the latest version for my new bb bold 9900, but still the error and then lock up. Power off, and get a message that I had an unknown error.

    People have had this problem since 2010. I never had this problem with my flashlight or my 9000 "BOLD".
    Anyone know what is happening? I also have the latest OS on my 9900.

    Found a solution! Laughing out loud! How delayed. I changed my email in bb code. For example, after changing from one gmail to another account, I changed it back and baaammmm! Problem solved, but do not know why it should be a problem in the first place right?

    Good luck to you guys who do not have the possibility of returning to another email.

  • Internet connection and Audio problems

    My HP Pavilion Dv7-4009tx Entertainment Notebook PC works perfectly since it was resolved a month ago, he got a new DVD player and has been reset back to the factory setting. It was smooth sailing for a month and then stupidly a problem. I turned on one morning to find he is slow to start and then when he did finally start a note came saying 'failed to connect to A Windows Service' after a quick search on the net I found a solution for this and solved this problem but it has not solved the other two problems I have now.

    It is one of the question that I have now, it's funny because my laptop only use the build in speakers. Then I thought maybe because I could find something to fix, but so far nothing has worked.

    And the other problem, my Internet connection is non-existent and even after checking on the net he had anything that actually worked.

    Is there really a possible solution to these problems? I can also provide more screen shots if needed, just tell me.

    Note: Ignore the isn't the battery icon, I currently do not have a battery that works.

    Wow, your system is really messed up.

    OK... what I would do is a "reimage" of your system. In other words, reinstall the operating system. Backup your important files on an external device.

    You should be able to perform what is called an "Image system recovery" as mentioned here. Restart the computer and press F8 a bunch of times until a menu will appear (the Advanced Boot Options menu) and select repair your computer. The rest is on this page that I linked. Click "View all" at the bottom of the page linked to learn more.

    Your system must have a HP recovery partition has set up to do this, you can at least go back to square one and have a fresh start.

  • I use Photoshop CC and I have problems to use the scanning feature PLC culture and the strraigten.  Other printing features work within the progrram, but no connection when I use don't automate.

    Am I missing a configuration of PLC to allow me to crop and scan several photos?

    With the help of 8.1 with canon MX340 wireless and final version of Photoshop CC.

    Help.

    [email protected]

    VIC

    I plugged a usb cable and I was able to use the WIA import feature and

    the menu of the controller,

    He gave me the opportunity to select the printer and scan using the automaton

    function.

    When I removed the cable, it would not recognize the printer scanner in the

    Wireless mode.

    I tried to restart the system, no luck.

    In fact, when the cable is removed, the function to automate is

    "grayed out" which would explain why it cannot find the scanner.

    Any ideas?

    VIC Ouellette

    K1CGI... QRZ?

    In a message dated 12/09/2015 11:41:18 eastern standard time,

    [email protected] wrote:

    You talked

    by [email protected]

    (https://forums.adobe.com/people/[email protected]?et=notification.mention//forums.adobe.com/people/ [email protected]? and = notification.mention) in Re: I use Photoshop CC and I

    problems to use the scanning feature strraigten and the cultures of the automaton. Another impression

    features work within the progrram, but no connection when I use don't automate.

    in Adobe Community - view [email protected]of reference for you

    (https://forums.adobe.com/message/8274458?et=notification.mention#8274458)

  • I have problems connecting with adobe catalyst in program adobe muse. A pop-up window appears saying that "access to adobe ID has expired. Check your connection and try again later. I checked my internet and everything works fine.

    I have problems connecting with adobe catalyst in program adobe muse. A pop-up window appears saying that "access to adobe ID has expired. Check your connection and try again later. I checked my internet and everything works fine. Can someone help me with this?

    Hello

    Please try the steps in the following thread

    I have problems connecting to Business Catalyst Muse.  When I try to publish, I get a message saying his time trying to connect with my Adobe ID - and check the network connections.  All of my connections are very good... Muse is connected to my Adobe

  • Arabic font, it is not written in the correct way alphbet is not connected and he writes from left to right.  How can I solve this problem?

    Arabic font, it is not written in the correct way alphbet is not connected and he writes from left to right.  How can I solve this problem?

    CS6 and below: How to access the features of Arabic and Hebrew in Photoshop CS6 - YouTube

    Creative cloud. CC to CC 2015:

    First install the value in the parameter of English/Arabic language: change the language setting of your Cloud Creative applications

    Then enable Middle Eastern features in Photoshop: How to write in Arabic in Photoshop CC (and other adobe programs)

    I would like to know if it works.

    Gene

Maybe you are looking for