write data to the cell in excel

Similar Questions

• Can I write data to the memory of the Machine (not SD card)?

  Can I write data to the memory of the Machine no SD card?

  I know that I add data using FileConnection like this

  FileConnection fc = (FileConnection) Connector.open ("file:///SDCard/"+"da.txt", Connector.READ_WRITE);

  This is the code that write to the SD card.

  But if I want to write in the memory of BlackBerry, what path will be in the FileConnection?

  Or is it impossible to add files in the memory of BlackBerry?

  It will be something like "file:///store/home/user/".

• See the time with the date in the cell?

  How do you not see time with the date in a cell? I tried all the settings I can find but without success.

  Using the numbers from version 3.6.2 (2577) - OS: El Cap 10.11.6

  I don't want to see that 12:00:00 AM

  

  Hi Russ,

  Inspector to format > cell, the parameters as shown below:

  

  Kind regards

  Barry

• How do you return a blank in table 2, when there is no data in the cell related in table 1?

  I run a recreational League of golf and have been recording the scores of the players (50 + players in total) with the intention of maintaining a form of disability from the League.

  So far, I did most of the calculations manually in number. Recently, I have experimented using the Lookup function but have encountered a problem with the time where the player does not play this week.

  In table 1, where I do all scores record cel when they do not play is left blank. However, in table 2 than corresponding cel returns a 0... strikes completely out of whack handicaps.

  Here is what I used in table 2 for the information of table 1...  SEARCH (name, 2016 Stats::Table 1 $Last: $ name, 2016 Stats::Table 1::G44)

  I also tried to add an IF statement, but I have obviously not understood correctly as he said I tried to refer to a cel in the statement itself.

  Example of the disability Page in the table 2 list a 0 is returned in cel 6... which is then averaged in the cel of last second... namely the problem. The cel with the 6 in it is a formula that counts the number of moves played and see it 6 because it counts as a trick played 0. This shows the wrong average score of 65.666

  Them	A	78																						1	78
  Me	Me	80	75	81	0	81	77																	6	65.6666666666667	-10

  As it appears in table 1. indicating the total number of rounds played in 5 and returning the precise average score of 78.8

  Me

  Me

  80

  75

  81

  81

  77

  5

  78.8

  Hi pondball,

  (Could be my 'golf name' somedays)

  

  Formula in Handicap::B2 and filled to the bottom and right at Handicap::X4

  = IF (LOOKUP ($A, data: $A, Data::B)=0,"",LOOKUP($A,Data::$A,Data::B))))

  IF compared the results of the first SEARCH and if it is zero, returns an empty string. If the comparison returns FALSE, the second SEARCH is called, find and returns the result of zero. AVERAGE does not take into account all results of text, including the string NULL, a zero-length text value.

  COUNT (used in the column count the number of turns) also ignores the text values.

  4th place of disability shows one of the reasons for not using LOOKUP.

  SEARCH alwas accepts a "close fit" with the search value. 'near match' for RESEARCH is defined as 'the largest value equal or less than the value of the research', and for the values text, "less than or equal" can be described as "identical or come forward in a list of items of text in alphabetical order.»

  For us, the other two values in the name list are 'less' us and the most important is 'Them', the values for 'Them' are returned.

  For this reason, I tend to use VLOOKUP instead of RESEARCH in many cases.

  VLOOKUP present the disadvantage of requiring her research-where location which will be the first column of the lookup table (which is not a problem here, because the location of the research is one ot the column data table).

  But also has the advantage of af being able to require an "exact match" search value.

  Here's the same tables of two, with VLOOKUP replacing LOOKUP. Note that the VLOOKUP function has a different syntax than the LOOKUP function.

  

  Formula VLOOKUP in Handicap::B2, filled with verse down and right at Handicap::X4:

  = IF (VLOOKUP ($A, Data: $A:$ X, COLUMN (), FALSE) = 0,"", VLOOKUP ($A, Data: $A:$ X, COLUMN (), FALSE) ")

  Written as above, the formula works correctly in rows 2 and 3, but will just return the error in the 4th row triangles, since it will not find a match (exact n) for 'Us' in column A of data.

  After confirming that it produces no unexpected error, wrap the formula in function SIERREUR as shown below and repeat the filling down and the right filling operations above.

  SIERREUR function interrupt all errors, including those affecting the results without your knowledge if they occur. Always delay adding IFERROR until you know what are the errors he fools.

  =IFERROR (IF (VLOOKUP ($A, data: $A:$ X, COLUMN (), FALSE) = 0,' ", VLOOKUP ($A, data: $A:$ X, COLUMN (), F ALSE))," ")

  Y2: = COUNT (C2:X 2)

  Z2: = AVERAGE(C2:X2) (base form)

  Z2: = IF (Y = 0,' ", AVERAGE (C2:X 2)) (real form)

  The encapsulation of the AVERAGE function in the IF statement deletes the calculation if the number of items to the average value is zero, AVERAGE preventing from return to a division by zero error. The number of circles in the column there is NOT used in the calculation of the average (AVERAGE did his own count), but is used as a switch 'OK to calculate' leaving the calculation of the AVERAGE to move forward.

  Kind regards

  Barry

• Can I limit data in the cells to a single app?

  I am considering upgrading my phone to Rabat for an iPhone. I use iOS on my iPad for several years, but have never had a smartphone before. My iPads are Wi - Fi only so I never had to worry about the limits, and since I do not anticipate needs a lot of data I expect to get a plan with a small data limit.

  I know I can say iOS does not allow the use of mobile data and only to access data via the Wi - Fi so that he does not eat my data when I don't want it.

  My question is this:

  I can say for a specific application access cellular data while blocking all other applications to do? For example, maybe I want to use an app for navigation while driving. It requires cell data for the navigation service knows where I am and you can send me instructions and alerts. But I don't want all the other apps on my phone goes on line and using data while I am using the cellular connection rather than a Wi - Fi connection.

  No matter which iPhone I get would have iOS 9.3 on it. Probably the SE of the iPhone, but I'll look older before making a final decision.

  Thank you.

  Yes - cell data can be disabled for individual applications. So you can disable it for the applications that you want to restrict and let it on-site for those who have not. I hope you enjoy your new phone

• How to write data from the acquisition of data in NetCDF format?

  I connect to a set of data from the sensor through the DAQ assistant and want to write all data in NetCDF format. I have the required plugins installed, but still can not find how to do this.

  Or the labview can only read the netcdf files, but cannot write it! Please let me know if there is any other way out. I have looked everywhere but could not find something useful!

  Thank you

  Hey,.

  Sorry, the sheet in effect only allows to read NetCDF files, not writing to the NetCDF format.

  Kind regards

  -Natalia

• How do you use the freqout as the sample clock to write data on the of 6224 PCI

  Using PCI-6224, I try currently to export data using the freqout as a reference clock sample to a digital output channel. I plug the scope to see the clock on the freqout PIN. However, the data seem to be missing. How can I output the data correctly using the reference for timing? What am I missing that connects the two signals together? Any help would be greatly appreciated. I am writing this code in MS VS C++ and here's what I've done so far:

          int32       error=0;
          TaskHandle  taskHandle=0;
          TaskHandle  taskHandleFRQ=0;
          char        errBuff[2048]={'\0'};
      uInt8       data[8]={1,0,1,1,1,0,1,0};
  
      /*********************************************/
      // DAQmx Configure Clock
      /*********************************************/
      DAQmxErrChk (DAQmxCreateTask("",&taskHandleFRQ));
      DAQmxErrChk (DAQmxCreateCOPulseChanFreq(taskHandleFRQ,"Dev2/freqout","",DAQmx_Val_Hz/*Units*/,DAQmx_Val_Low/*IdleState*/,0/*Delay*/,10000/*Freq*/,0.5/*DutyCycle*/));
      DAQmxErrChk (DAQmxCfgImplicitTiming(taskHandleFRQ,DAQmx_Val_ContSamps,8));
  
      /*********************************************/
      // DAQmx Configure Digital Output
      /*********************************************/
      DAQmxErrChk (DAQmxCreateTask("",&taskHandle));
      DAQmxErrChk (DAQmxCreateDOChan(taskHandle,"Dev2/port0/line0","",DAQmx_Val_ChanPerLine));
      DAQmxErrChk (DAQmxCfgSampClkTiming(taskHandle,"/Dev2/PFI14",10000,DAQmx_Val_Rising,DAQmx_Val_FiniteSamps,8));
  
      /*********************************************/
      // DAQmx Write Code
      /*********************************************/
      DAQmxErrChk (DAQmxWriteDigitalLines(taskHandle,8,0,10.0,DAQmx_Val_GroupByChannel,data,NULL,NULL));
  
      /*********************************************/
      // DAQmx Start Code
      /*********************************************/
      DAQmxErrChk (DAQmxStartTask(taskHandleFRQ));
      DAQmxErrChk (DAQmxStartTask(taskHandle));
  

  I think that the original code was operational. However, given that the data transmission has been set to finished, I had a hard time to visualize the data on my scope. By changing the value of DAQmx_Val_FiniteSamps to DAQmx_Val_ContSamps, I could easily see the data.

  My mistake. I'm still learning here. Thanks for the time.

• How to write data to the XML in VBA 6

  Hello

  I am using vba 6

  I have different data like strings, integer etc I get the object group tag.

  I want to write data of XML on the button click.

  and save this file on the way to my pc.

  Bad forums. Message here:

  MSDN - MSDN forums - Microsoft

• How to prevent the entry of the data in the cells that don't meet certain conditions

  So, the question is that I have to warn the data to enter into the cell that does not conform '< 500' condition or, on the other hand, satisfy the condition «> 500 "»

  I noticed that the link was broken.

  Here is the example:

  for (r = currentDataGrid.startRow; r)<=currentDataGrid.endRow; r++)="" {="" search="" all="">
  for (c = currentDataGrid.startCol; c)<=currentDataGrid.lastVisibleCol; c++)="" {="" search="" all="">
  Val = getCellVal (r, c); Get the value in the cell (the cube value)
  If ( <= 10="" ||="" val="">20 val) {/ / my rule to block}
  currentDataGrid.readOnly [r] [c] = 1; Block cell
  } //END IF
  } //END SECOND "FOR".
  } / / END FIRST "FOR".

  This isn't a good solution if your form is too large. I use this function while the page is loading (CustomOnLoad() I think).

  Good luck

• Write data to the Source folder

  I'm trying to change part of a script that I use for work he entered into the source of a file folder, run on rather than to a specific folder (in this case, the office).  Can someone help me understand how to change and/or by adding the code below?

  create the reference to the csv file

  var file = new file (Folder.desktop + "/ Data.csv");

  Open the csv file in Add mode

  leader. Open ("e", "TEXT", "?");

  jump to the operating system in use on the line set

  ($.os.search(/windows/i)! = -1 ? file.lineFeed = 'windows': file.lineFeed = "macintosh";

  at the end of the file

  leader. Seek (0.2)

  write all the information required for the csv file

  Name of the document, Date1, database2, donnees3, etc.

  file.writeln (decodeURI (activeDocument.Name) + ","Data1","Data2","data3"," + data4. ") ToString()', '+ Data5.toString ());

  Close the csv file

  leader. Close();

  Now, I'm assuming that the part to change here is Folder.Desktop.  And I think I will need to change this option to be Folder.getFolderName.  getFolderName is a variable used in other code that checks the source directory of the current file.  This code of source directory, it's what I do not know how.  The script itself would have to do the check whenever it is running as I want him to be able to work with included subfolder of batch runs, make a new file in the subfolder when working with these files.  Anyone has any ideas, how to proceed?  Any help is very appreciated!

  dgolberg

  Edit: I forgot to mention; It would be nice if it can also store the name of the folder in which the source file is in a variable, so it can be written to the file as .csv.  This is not as important as the code mentioned above, but it would be helpful none-the-less, if possible.

  No problem, I was able to solve it on my own all the time.  I thought it would be much harder than it actually was. but has been able to do by simply changing

  var foldLoc = new File ("C:\\Temp\\");

  var file = new file (foldLoc + "/ Data.csv");

  TO

  var foldLoc = app.activeDocument.path;

  var file = new file (foldLoc + "/ Data.csv");

  and now, it records the data and the .csv file in the same folder as the currently open project.  Thanks for trying to help; It is much appreciated.

  dgolberg

• Export data from the forms to Excel

  Hello
  
  I am facing a problem with exporting data from a form to excel.
  
  When I go to the menu - and file-> export. The export starts then progress, then disappears.
  
  If I do just steps above and hold down the CTRL key... the excel opens.
  
  I remember there was a setting to recognize that this export goes to Excel. But have forgotten what I did to solve the problem.
  
  My pop Blocker is turned off.
  
  
  If anyone can help out me... that would be greatly appreciated.
  
  Thank you

  Hello

  In the browser, please add the URL of the application to the trusted sites list and sign the application again.

  Also, be sure that no errors are reported in the log database (no space).

  Export option in menu Apps does not work under Windows-XP OS
  Export option in menu Apps does not work under Windows-XP OS

  Export form data to Excel the FILE using file > EXPORT
  Export form data to Excel the FILE using file > EXPORT

  Kind regards
  Hussein

• two digital to write data to the power file triggers

  Hello

  I am currently building a VI to use two digital front as triggers posted the pic to start and stop writing data to the file.

  When start trigger is activated, the data is written to the file, it goes indefinitely until the stop trigger is on.

  If someone give me some advice, they will be appreciated.

  Hi Jetfire,

  you know the difference between BMP and JPG?

  Size! (And this is the reason why BMP is not allowed in this forum.)

  Just you rename a file does not change the dataformat. Please attach real JPGs (or better yet the PNGs) next time!

  Jetfire created a related thread, now with a VI instead of an image...

• How to write data at the end of the doc in sense the other way around? [CS6 - jsx]

  I need to move all the entries in my texts spec at He end of the doc. To keep the correct reference overall found entries that I have to deal with in reverse order

  for (i = mFound.length - 1; i > = 0; i--) {}

  .. .etc

  but to invent, how to place entries cannot write off at the end.

  String:

  mStory.insertionPoints.item(-1).select ();

  App.Paste ();

  does not work properly (of course). It does this:

  10.

  9.

  8.

  7.

  6.

  .. .etc

  How to get

  1.

  2.

  3.

  4.

  .. .etc

  ?

  Dmitry,

  Well, I've been basically dealing with moving the notes at the end of the story in the correct order. Anyway, concerning the figures by exposing, there no need to choose things and remove these selections. She considered more safe, like Vamitul too mentioned, to work on the objects. To manage numbers superscript, I would do this:

  app.findGrepPreferences = null;
  // Search just the note contents: lookaround leaves the braces in the text
  app.findGrepPreferences.findWhat = /(?<=\{\{\{).+?(?=\}\}\})/.source;
  found = app.documents[0].findGrep();
  
  for (i = 0; i < found.length; i++){
      found[i].parentStory.insertionPoints[-1].contents = '\r' + String (i+1) + '.\u2003';
      found[i].move (LocationOptions.after, found[i].parentStory.insertionPoints[-1]);
  }
  
  // Now search {{{}}}
  app.findGrepPreferences.findWhat = /\{\{\{\}\}\}/.source;
  found = app.documents[0].findGrep();
  for (i = found.length-1; i >= 0; i--){
      found[i].contents = String (i+1);
      found[i].position = Position.SUPERSCRIPT;
  }
  

  Then first move the notes at the end of the story, leaving behind all the triples of braces. Then, after you have moved the notes, do you a new search on the sextets of braces. Only select and delete, just redefine the content of what you have found and apply an in shape.

  Peter

• Export data from the database to excel file using the procedure

  Hello
  
  I need to export data from database to oracle 10 g for the excel file, I try this code:
  
  First, I create directory to the user sys and give permition to user that I'm working on it

  create or replace directory PALPROV_REPORTS as 'c:\temp';
  
  grant read, write on directory PALPROV_REPORTS to user12 ;

  then I run this code

  declare
      output utl_file.file_type;
  begin
      output := utl_file.fopen( 'user12' , 'emp1.slk', 'w',32000 );
      utl_file.put_line(output, 'line one: some text');
      utl_file.fclose( output );
  end;

  the problem appears as
  ORA-29280: invalid path ORA-06512: at "SYS." UTL_FILE", line 29 ORA-06512: at"SYS." UTL_FILE", line 448 ORA-06512: at line 4
  
  Notice that I use the operating system windows as a client and a linux as a server database

  The file will be written to the database server or your GNU / linux and I'm quite sure, there is no folder named "c:\temp" on linux. It will probably be ' / tmp' on a unix server.

  And open the file, you must give the name logic directory 'PALPROV_REPORTS' it instead of the user name "utilisateur12".

• Import data from the grid using Excel Option not available

  On the grid, we have the ability to import the data in grid. However, on the Import Wizard, the only option that appears is import values separated by comma (CSV). Options for importing to Excel not displayed. Why is it other import options is not available?

  You may need to register the OCX that offer this feature.

  You can check out a place like this OCX files:

  C:\Program Files\IBM\WebSphere\AppServer\installedApps\E1DVWEB1Node01\EA_JS_Prototype.ear\webclient.war\axctls\jdeexpimpU.cab

  and

  C:\Program Files\IBM\WebSphere\AppServer\installedApps\E1DVWEB1Node01\EA_JS_Prototype.ear\webclient.war\axctls\jdewebctlsU.cab

  Put the OCX files in a network location, and then put cela in a connection/GPO script or run it manually:

  copy '\\somenetworklocation\jdeexpimpu\jdeexpimpU.ocx' 'C:\windows\system32\.
  copy '\\somenetworklocation\jdeexpimpu\jdewebctlsU.ocx' 'C:\windows\system32\.
  regsvr32 "c:\windows\system32\jdeexpimpU.ocx".
  regsvr32 "c:\windows\system32\jdewebctlsU.ocx".