Write in a cell in an existing Excel file without displaying an overwhelming message
I'm learning to communicate with the spreadsheet Excel through ActiveX. I started with the example Labview "To write the Table to XL", however, this example creates new file which is not my case of the replacement of an existing Excel worksheet. So, I made my changes in VI to overwrite a file with my new value. Unfortunately, there are always prompt to overwrite the file, and even if I press 'Yes', the file retains unchanged.
The help that I need is to:
1 - check my attached VI for any errors
2. make the VI by overwriting the file without all the guests
Thanks in advance
In your new Open Workbook.vi, you have a File.vi open/create/replace. You don't need that.
Tags: NI Software
Similar Questions
-
I want to record the revenue of every four hours in an excel file without overwriting the previous entry. It would work like a button "save under", but instead enter a new name, the name of the recipe as well as the date and time is what the file would be saved under. Any thoughts on whether this is possible, or how it can be accomplished would be great.
Everything looks good except for a minor detail that perhaps with that you could help me. Instead of naming the file "data", I want to use the contents of cell C1 to datatable name. I could do in the argument Filename = or should I use an expression.
-
Write to specific cells of existing Excel file and save as a new file using LV 8.6
Hi all
I'm new to LV and am currently responsible for creating a program that can open an existing Excel, the input data into the program that will be written in a specific in the file cell excel and then saving the file edited running under a new name.
I went through all the forums, but I can't read the samples sent to them as I use LV 8.6 is why I still have a problem, see how to create a program like this. Can someone help me and guide me how to write this program in this version of LV? I do not have a microsoft office tool box, so another approach might be preferred. Thank you.
Aaron
-
How to write a double waveform in an Excel file without blank lines of cells
Hello
I am writing two waveforms in an Excel file, I'm almost there, but the stumper is that after each data line, a blank line appears in the XL file.
Probably something simple I forgot because I am fairly new to this.
Thanks in advance,
Joel
-
I bought the program to convert PDF files to Word, Excel, files etc. I am logged in and try to convert a word file as an Excel file. It shows that I am connected to my account, I guess, (it shows my name at the top) and I clicked the export file, choose the file to convert, click Excel in the box, to convert language was English, then click the Convert button blue. It looked like it was working, then in seconds, said that I was not connected to the internet. I tried to do this several times (on two different days) and get the same message, not connected to the internet. I am connected to internet, I go to my browser and load anything.
Thanks for any help! I feel desperate to get this project underway.
Check your hosts file.
help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-
I'm going to measure more than 100,000 SAMPL and I write in a document. I would use Excel to present much more easy, but the problem here is that excel can have only 60 000 samples. also use text file is not the desired one.
you have a solution that helps me?
Excel 2007 gives you 1 M lines. Can update you your version of Excel?
-
Writing an Excel model without display
Hi all..
Please take a look at the attached VI. (LV7.1)
I tried to open existing model n and write data in particular cells. I don't want Excel to open and show... he should write automatically.
Hi Nghtcrwl,
Add the 'visible' property to the first node of property a connect a true him. The first worksheet is index 1.
Mike
-
How to reduce the size of the excel file without using any software?
my current file is 2 MB, how can I reduce the file size becomes a few hundreds KB only. I have seen that some files can reduce to 1 KB (directed by my previous colleague). How to reduce a large file to small fie size in excel?
You can compress any file using the Windows 7 built in zip program. For the pease method see:
http://windows.microsoft.com/en-US/windows7/Compress-and-uncompress-files-zip-files?SignedIn=1 .
Will depend on the size of the file compressed on the original files - it's maybe not as small as you want.
-
Add text to an existing text file without replacing
I create a text file that you match this information from a user interface. My hope is that I can add information as buttons are clicked. But when I write in that text file which is already there.
myFile.writeln("\r\n",mySFolder," ",myCountText.text, );
I wonder how to add to the text file.
Here is an example...
var Log =File(Folder.desktop +"/LogFile.txt"); Log.open('w'); //open a new document Log.writeln("This is a log file"); Log.close(); Log.open('e'); //open for append Log.seek(0,2); //seek to end of file Log.writeln("Write text to re-opened file"); Log.close();
-
Adding a table Excel file using ActiveX
Hello
I want to add a figure that has been produced using data from data acquisition to a specific cell in my existing excel file (reversing a graphical indicator in jpg/bmp,... and put it in the excel file). But I can't find the specific method to do so. I have changed one of the examples so I can add a few numbers to a specific cell in excellent file (VI attached). Someone knows how to do this?
Also, in my test, I'll do this for 15-20 numbers (put 20 numbers in different places in the existing Excel file). I do this one by one? (opening of the application 20 times) or there is a way to just do all at the same time.
Thank you.
Now, it looks a lot better.
I also added the part in which the image is from a waveform graph. For this you must use the Invoke node Export Image waveform graph. I've exported as bmp, save it in a file and then added in Excel. It is a solution. You can try different image format in order to find the one that works best for you. BMP is big enough.
Another solution would be to use the graphical waveform / invoke node / export the Clipbord Image and spreadsheet use invoke node function / paste. In this way, that you don't have to write the image to the file. Although I find it more difficult to control the position where the image is pasted. In any case, you can give it a try and play with her a little.
You can build your complete code Export To Excel using this example. Just add a loop (or code) between the opening of the workbook and close it.
PS: I hope that the waveform graph node is the same also in LV2010. I can verify that Monday.
-
How to get data from an Excel file exist using report generation tools
I try to use the Excel vi get the data of the report generation tool, but I can't understand how to activate a path can be explored in the right type for the VI. I tried to use the new Report.vi, but this does not work unless you use a template. It will not open an existing excel file and make an open report to extract data from.
Essentially, I have a bunch of excel files that have data in them, and I want a VI allows to analyze the data. I'm going to pull in all the data directly from the excel file so I don't have to reproscess them all in text so I can use the more standard datasheet live but to convert even the excel file programtically in labview I still need to be able to open the excel file and get the data?
I found my problem. It turns out that only not to have had a problem with the tool box new report vi. I had accidentally wired an input control of path of folder instead of an input control of path of file to it. Changing the file type took care of her and I was able to access excel files, I tried using the new report VI to extract the file, and Excel Get Data to extract the data.
-
Whenever I open an Excel file, I get a pop for Windows Installer
Original title: Windows Installer
Every time I open an existing Excel file, Windows Installer opens first, there is a significant delay and opens the Excel file. What is the solution to get out of the process of opening Excel from Windows Installer files? I don't see Windows Setup in the control panel so I can't remove it.
Thank you
Hi Phil,
Windows Installer tries to configure excel on your system.
Click Start-> settings-> Control Panel-> Add/Remove Programs-> Microsoft office-> change-> add/remove component-> select excel, then click on run from my computer.
Once its finished installation-> start excel from start-> programs-> excel (or in Microsoft office-> Excel).
Let the full installation. Close excel and open your files.
I hope this helps.
-
import data from excel files variables
Im trying to find a way to import 3 sets of variable data
in a provision saying a certificate variables being, for example, a name, a date of passage and a location.
instead of typing 100 different certificates is there a way to create a layout with 3 variable data fields can import information from a pre existing excel file, thus making 100 different pages I can send it to print. the work exists in bridge CS4 and I have an excel with all the info file, the info should be formatted in a specific way.
HELP this is a persistent problem.
Don't worry, it's not difficult (if the XML is very good) you can select and set any text or dynamic object... But to explain here is a little difficult to do... a video tut this is what you need...
G
-
Read the specific calculation worksheet in the Excel file
HI, I recently got juice generation of report tool and I want to open my excel file
juice im trying here and there and looking in the Excel Thread but can't find many clues...
My goal to do is open my worksheet 2 in my excel file and display in a table
need help
Here's something for you: I Fabienne ' t understand what is the problem because it seems to work with one of my own Excel files, and it does not work with the one you have joined (the values are different).
Can you please tell me weather or not, it works on your PC?
-
original title: write protection
Whenever I try to delete files from my USB, the message saying that you can not delete the file, the disc is write protected is displayed. What I can do to undo the write protection?
Try this
Go to disk management in administrative tools of the control by just one panel right click on the icon my computer on the desktop and select manage and then try to format your USBOR
Try this
http://www.ehow.com/how_5187399_format-write-protected-disk.html
Maybe you are looking for
-
Need clarification on issues of Java. It is clear that we can disable Java in the configuration java itself or via the plug-in Panel. However, what about the firefox options menu? When you click on Tools_Options_Content and then you can check or unch
-
I used to be able to give a voice command for a phone call and Siri would recognize the name. Now, Siri gets wrong most of the time and does not seem to learn to correct themselves. Even if it gets the right pronunciation, he misspelled and does not
-
Broken left hinge on Satellite Pro A40 - need part number
Can anyone help? I broke the left hinge on my A40. I can't find anywhere to get a replacement and I don't know where I can find the part No. so I don't know, I get the right one. Does anyone not know the part. and where I can buy a hinge?
-
SVChost.exe - k netsvcs paralyzed my machine like no malwaer never. From what I can tell, it's something to do with Windows Update.Nothing else unusual is running. There is no malware involved. And all updaes settled except that I can't update .net.
-
original title: Vista 64-bit and Adobe I have MS Vista with a 64 bit OS. Adobe does not work or is not supported from what I understand. What are my options?