Write then start windows xp
Hi everyone!
I use windows XP profesional. Sometimes, I want to remind myselves something to do the next day. Can someone please tell me is it
a way to display a message on the screen when I start windows XP to remind me what to do. Thank you very much!
You need a third party program. Google for something as «simple reminder»
Tags: Windows
Similar Questions
-
Acer logo appears 2 times then starts windows.
Hi entire community of Acer.
I recently bought an Acer S670MG or computer M679G of office with the following specifications.
Processor Intel core 2 due 3.1 ghz. 6 MB of L2 cache.
6 GB of ram ddr3 to bus 1066 mhz
NVIDIA Geforce 9800GT 512 MB/256bits external graphics card.
WD 1 TB SATA hard drive.
and I faced a problem that when I turned ON computer it beeps Acer Empowering People appears a few seconds then display has disappeared. then after cutting seconds, once again beeps sounds and new Acer logo appears, and then starts windows. can someone help me why this happens. because of this, boot time is much longer.
P
. in the bios. I tried both modes of hard drive. RAID and native ide. in third place is AHCI, I think that I have not yet tried.
Help, please.
BIOS. energy or American mega trend.
Windows 7 Ultimate 64 bit SP1.A link to all of the troubleshooting you have already done here:
Problem seems to be resolved by applying this thread.
-
FX6831-03 will not be able to start Windows. Just shows the gateway splash screen, then freezes
My Gateway FX6831-03 will not be able to start Windows. Just shows the gateway splash screen, then freezes. OS is updated to current MS Win7-64 bit-w/all and virus/malware protection., Went over 4 days vacation, and when I tried to turn it on, it should display the gateway splash screen, then stop. can't hear anything that happens on the inside.
Problem solved! An external hard drive, powered by a separate power supply, was not turned on, but it was plugged into a USB port. When the computer "seen" this cross-town 'dead', he just stop - but no message appears problem.
The good part? Vaced out all the dust and replace the bios battery. [I'm good for at least another 2 years;-]
-
Unable to save changes to the sounds. When registered and then double checked, change moved not. This applies specifically to sound for the navigation to start windows Explorer. I'm putting it to zero.
Unable to save changes to the sounds. When registered and then double checked, change moved not. This applies specifically to sound for the navigation to start windows Explorer. I'm putting it to zero.
====================================
After making your change did you left click... Apply / OK?
John Inzer - MS - MVP - digital media experience -
* Original title: reinstalling Windows Vista
I tried to format the C drive and then reinstall Windows Vista using the windows reinstall disk but I couldn't start in it. I restarted my computer, press the F12 key and selected boot from cd/dvd, but the computer still started in windows. My computer is Dell. If there is no solution, it is possible to reinstall windows without using the disc?
Hello
Here are the options of relocation:
How ro reinstall from the Dell recovery partition:
Reinstalling the printer Dell supplied disk:
______________________________________________
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.
Other manufacturers recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs
Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:
"How to do a clean install and configure with a full Version of Vista '
http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html
And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.
And phone Activation may be necessary when you use the above installation method.
"How to activate Vista normally and by Activation of the phone '
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
See you soon.
-
When I turn on my pc, the system starts the Pentecost a poblem but when windows Vista family premium starts to go the window that allows you to put the password it goes black after a wile it restarts and the same thing happens again.
safe mode works I have Dome system restore format and reinstall windows and happens again :(Hi LGStrike,
Restore your computer to a point before the updates being installed with the System Restore. Then proceed as follows:
1. go in Control Panel , and then select Windows Update.
2. click on check for updates.
3. once the results come back, click on the link that shows Important updates and deselect all the updates except the first 3 or almost and install the updates.
4. Repeat steps 1 through 3 until you receive the error message.
Dena
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Windows 7 screen doesn't have a photo and then starts to blink. Can't get sys repair of work either!
Step 1 - start the computer - everything seems fine, Windows starts very well and brings me to the login screen.
PROBLEM: Login screen has nothing on it, but the pictures and the note of windows 7 on the bottom. If I have, in my frustration, to sit and watch for a few seconds the cursor shows busy and the screen starts flashing.
To solve this I ran all sorts of diagnostics of the equipment screen you get when you press the F key it tells you to start - before it comes to the windows login. I spent a day run this.
Today, I got online using this, my other computer, Googling the problem, I found that I can press F8 while trying to start and get the repair screen - which takes me for the most part to the windows screen that won't let me go anywhere!
PROBLEM 2: I chose to launch repair and when I choose repair launch on the screen that allows me to do or to start windows normally it's just this page - no matter how I try to choose.
So, I can't use the computer and I can't figure out how to repair the computer. I have a LOT of documents on this computer that I can't replace. Please, please, please help me!
Hi Cheryl,
Thanks for posting your query in Microsoft Community.
Do you remember the number of the update?
{For the KB updates of failure numbers, follow the underlying steps: }
- Open Windows Update by clicking on the Start button. In the search box, type Updateand then in the list of results, click Windows Update.
- In the left pane, click view update history. Check the recent update installed.}
I understand that you found start flashing screen questions in your Windows 7 system. This scenario has started happening after installing the recent update of KB3097877.
In order to diagnose and resolve the issue, I suggest you try the steps posted by Ravinath P replied on 13 November 2015 in the following thread and check if the steps help you to solve the problem.
Screen flickering and problems log on Windows 7 after installation of updates
Hope this information is useful. Let us know if you need more help, we will be happy to help you.
-
Original title: Windows Update keeps reseting
My computer had a mandatory update that began when turned on. Happens to the last step of the update every time, it goes to the "starting Windows" and then it all comes back to the update. Turn on the computer and then next turn has not changed anything either, and I can't after that.
Hi Reilly,
Thank you for the update on that.
Please follow the steps in method 1, by our Support Engineer Ganesh Achar B replied on 12 February 2015 on the last response.
If you are able to start the computer in safe mode, take note of the number of KB updates which fails to install.Also you can restore the system in safe mode.
Check out the link below to perform a restore of the system.
http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore
Warning: System Restore affects file system of Windows, programs and registry settings. It can also make changes to scripts, files, batch and other types of executable files created under any user account on your computer. System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file. If you have backups of your files, you can restore files from a backup.
Please answer us with the State to proceed to further troubleshooting.
-
I formatted my hard drive and xp wouldn't charge b/c he didn't see the hard drive. I then installed Windows 7 starter and cannot be upgraded. .
Probably, you need to boot in the BIOS of the computer and changed on the hard drive in IDE mode, SATA, so it can be recognized by Windows XP.
Before that you plan to replace Windows 7 with Windows XP. Have you tried to familiarize yourself with the operating system first?
http://techingiteasy.WordPress.com/2009/08/19/for-the-former-Windows-XP-user-welcome-to-Windows-7/
If you want to run Windows XP, you can consider to dual boot Windows 7 and Windows XP. You first need to know if your computer is compatible with Windows XP. Much more modern computers are gradually support for Windows XP.
How dual boot Windows 7 and Windows XP
http://notebooks.com/2011/02/01/how-to-dual-boot-Windows-7-and-Windows-XP-Part-1/With Windows XP installed first:
http://notebooks.com/2011/02/17/how-to-dual-boot-Windows-7-and-Windows-XP-Part-2/ -
Satellite A660-158 - cannot start Windows
Toshiba Satellite A660-158
I bought a laptop Toshiba Satellite A660-158. It has served me less than a week. I think it's the broken hard drive.
My problem:
Once I start the computer, it started and has worked for a while, but suddenly, there was an error reading that I didn't have the time. Computer has been restarted. And does not load... Until the boot mode does not reach. But the initial test (with logo) succeeded. Takes a long time and finally gives an error:
-----
Cannot start Windows. Maybe it was because of the recent small difference is the hardware or software configuration. To fix this error:
1. Insert your Windows installation disc, restart the computer (the complete transmission wasn't)
2. choose the language settings, and then click Next.
3. Select "repair your computer".
If this disk is missing, contact your system administrator or computer manufacturer (he turned and said to wear to the DEPOT, but I do not have this feature).Status: 0xc000000e
Details: Unable to start menu, since the required device is inaccessible.
-----
Please help me! Idon't know what make me)
Please write to E-Mail: [email protected]Post edited by: HunterS7777777
Hey,.
And why do you think the hard drive is faulty?
Have you ever tried the repair your computer option? Usually with this option you can restore factory in a few minutes.Also if you have the Toshiba recovery disc you can also restore the factory of this disc. Just boot from it and follow the instructions on the screen. You need to do a few clicks only, installation with all the drivers and tools happen automatically.
If you have any other questions, please let us know! :)
-
Satellite L30-113 cannot start Windows OS
After downloading upgrades my computer does not start at the top. My computer screen shows a black screen, red, writing in the middle. He then goes to the screen, then go to windows error recovery page when you press on enter too lance beginning repair it then repeats the process and also switches its self off when you press start windows normally. I can't find the boot disks, the laptop is a Satellite L30 - 113 series.
Mary Anne.
Hello
I had a similar problem on my computer but was able to fix it.
I took my CD of Win XP and started the repair console.Then I used the command Chkdsk and scanned and repair files and sectors on the HARD disk.
Then I used the Fixboot command. He writes a new boot sector on the system partition.
Finally used Fixmbr command that repairs the boot partition's master boot code.Check out this page of MS:
[How to install and use the Recovery Console in Windows XP | http://support.microsoft.com/kb/307654]
Good bye
-
Cannot start Windows Journal or Tablet PC Input Panel
Suddenly, I get the following message appears when you try to start Windows Journal on my Tablet PC:
"Windows Journal cannot start. There was an error initializing inking components. If this problem persists... »
In addition, input panel Tablet PC version 1.7.2600.5512 brings is more a place to write
Suddenly, I get the following message appears when you try to start Windows Journal on my Tablet PC:
"Windows Journal cannot start. There was an error initializing inking components. If this problem persists... »
In addition, input panel Tablet PC version 1.7.2600.5512 brings is more a place to write
After extensive Google/Binging I finally jumped on my solution. I have Windows 7 Ultimate and Office Professional 2010. I tried different solutions online without success:
- Reset
- Fix Office 2010 (no, I didn't uninstall and reinstall)
- SFC/scannow (no problem found)
- The "delete and then add Tablet PC components" in Control Panel programs and features/turn on Windows features
- Close all browsers (without success)
Then it dawned on me that OneNote is a design feature. I figured that this was linked to components of Tablet PC inking, as my research has shown people also had problems with Windows Journal. I also had problems with Windows Journal, stating the issue of inking of the components. In OneNote, I went to the drawing Ribbon and tried to shoot when a popup said that I didn't have the Tablet PC features installed (even if I checked that). and offered to install it (Yes!). Curiously, he asked for the DVD for FrontPage 2003, I also installed. Who could guess, but it was my solution. I hope this helps someone.
-
Profile of user does not write in c:\windows\temp
Due to an update of Firefox, I damaged my user files. I installed a new profile, the limited access, to surf. Now when I try to download programs or to run JAVA applications, I get an error message... "cannot write to c:\windows\temp, access denied, file is read-only. Change the properties of files or contact Admin"in some way, I lost the ability to write to this folder. Changing the property of the 'read only' file does not work, it activates again when the file is closed. I have here a way to solve this problem while still limiting the administrator user profile. level?
First of all, if you look at the 'Read only' attribute of a folder in the Properties window, you must know that this box has absolutely nothing to do with any read-only attribute. It is actually used to customize the folder. Microsoft's explanation of this is in the following article:
"You can not view or change the read-only or the attributes of system files in Windows Server 2003, Windows XP, Windows Vista or Windows 7"
<>http://support.Microsoft.com/kb/326549 >To change the access permissions to a specific folder, the easiest method is to log on as an administrator and change the permissions using the 'Security' tab, as seen when right click on a folder and select "Properties". If you do not see a 'Security' tab, this means that you have XP Home or you have XP Pro with 'Simple file sharing' enabled. Assuming you have XP Pro, you can change the access permissions to the terms of this article:
"How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP"
<>http://support.Microsoft.com/kb/307874 >If you have XP Home Edition, you can start mode safe (repeatedly tap the F8 key during startup key) and then log in as an administrator and follow the above article, or you can log in as an administrator in Normal mode and use the command "cacls" from a command prompt window. To bring up a command prompt window,
Start-> Run-> "cmd".
Then, enter the command:
cacls C:\Windows\Temp/e/g everyone: F
What will give "everyone" access to the complete directory.HTH,
JW -
my laptop keeps going to the start page. No matter which option I choose, IE. safe mode, safe mood with networking, safe mode with command prompt, last known, good configuration start windows normally, it always comes back to the same screen. saw this post before and the invloved boot cd solution. I have not a cd ROM is there another way to solve this problem. Thank you people
Thank you for taking the time to make this post very informative, excellent. Without the machine test myself that I can't be sure, but based on the age of the computer and what you wrote I suspect for lack of material. It could be something simple like the hard drive or RAM or something more serious like the motherboard. I wouldn't recommend replacing any material on such an old laptop.
As long as the hard disk has been physically, you can recover your data easily. If the hard drive has failed, then you will need to send the drive to a professional drive savers data recovery company. It is quite expensive ($500-3700), but they can usually recover your data. Some insurance policies cover also, professional data recovery in order to check with yours. But let's be optimistic. ;-)
IMPORTANT - If there is no question that the drive is at fault - there are noises, for example - and the data is crucial NOTHING else ON THE DISC. Whenever launch you this player you can destroy data. If this is the case, send the drive to a professional data recovery company.
I'll give you the information on how to test the hard drive to see if it's good physically and how to recover data when you can't in Windows but in doing these things requires a certain level of computer skills. You know yourself the best and that it would be better to take the laptop to a competent local professional. If you do this, do not use a type of BigComputerStore/GeekSquad of the place. Get recommendations from family, friends and colleagues.
A. test equipment
Test the hard drive with a diagnostic utility downloaded from site of the disc mftr. or use SeaTools for BACK of Seagate. You create a bootable CD with the files you download. You will need a third party burning software to do as the free ImgBurn, Nero or Roxio. Burn as an image, not in the form of data.http://www.Seagate.com/www/en-us/support/downloads/SeaTools/seatooldreg
http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=201271 (how-to)Boot with the CD that you have done and do a full test of the reader. You will probably need to change the boot order. Your Dell can give you a temporary boot menu if you press F12 as the computer starts. If so, use your arrow key to select the CD drive. Otherwise, press F2 to enter in Setup (BIOS) and change the order of boot on the CD drive first. If the disk fails all physical tests, it must be replaced. Although readers of the laptop cost around $60, you should really consider if it is to put money in such an old machine. You can replace the disk, but the laptop is definitely at the end of its normal life and something else is doomed to failure.
There is information about the RAM test and other materials here:
http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot
B. retrieve data detach a healthy disk when you are unable to Windows
1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd.2. you can start the target computer with a Bart PE (if you use XP) or a Linux live CD like Knoppix and retrieve the data in this way. General information about the use of Knoppix for this are:
You will need a computer with two cd records, which is an engraver of CD/DVD OR a USB stick with a capacity to hold your data OR an external USB hard disk formatted FAT32 (not NTFS) *. Download Knoppix .iso image file and create your bootable CD. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or the free ImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created, and Knoppix will be able to see the files in Windows. If you use the USB key or an external hard disk, right-click on its icon (on the desktop) to get its properties and uncheck "read only". Then click on it to open it. Note that the mouse action by default in the window manager used by Knoppix (KDE) is a simple click to open instead of double-click traditional MS Windows. If you want to burn CD/DVDs, use the K3b program.
* My understanding is that you can now write on NTFS from Linux partition. If you wish to do this, Google for instructions on the use of the NTFS driver.
http://www.Knoppix.NET
http://www.nu2.nu/pebuilder/ - Bart PE BuilderC. recovery of activity for the future - http://www.elephantboycomputers.com/page2.html#Backing_Up MS - MVP - Elephant Boy computers - Don ' t Panic!
-
Laptop does not restart. Shows cannot start windows
Computer shows "Windows Error Recovery" and offers two options 'launch Startup Repair' or 'start windows normally '. I did both and the computer does not restart.
If I select "start windows normally" it returns to the screen allowing you to start two options and default settings for the "repair starting." He then proceeds to system recovery options, but then restarts to the two options under the "windows Error Recovery". It seems to be stuck in a loop.I removed the battery, etc. rebooted several times but seems to make no difference.
Above is Dell to reinstall Vista from the DVD on your computer.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Data recovery:
1. slave of your hard drive in another computer and read/save your data out there.
2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.
3 Alternatively, use Knoppix Live CD to recover data:
http://www.Knopper.NET/Knoppix/index-en.html
Download/save the file Knoppix Live CD ISO above.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://isorecorder.alexfeinman.com/isorecorder.htm
Download the Vista software from the link above.
After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.
Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.
Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1st in the boot order.
Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.
When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.
Click on the icons of hard drive to open and to understand which drive is which.
Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).
Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.
See you soon.
Mick Murphy - Microsoft partner
Maybe you are looking for
-
Firefox 23, home page opens in a tab
I installed Firefox 23. When I start firefox, it loads my homepage, but it load it into a tab. In the past, it would be just to load the home page, without the leg. Is there a way to go back? Thank you.
-
iMac too slow after upgrade of El Capitan
I get a lot of beachballing and slow start. Etrecheck said that protec6b is obsolete in the Yosemite OSX. What and how do to this day. com.Apple.csrutil.report.plist [failure] [loaded] 42 tasks Apple [failure] com.adobe.ARMDCHelper blah blah blah (20
-
PX4 - 300 d no info on the LCD displays
I bought a storage NAS PX4 - 300 d on Ebay. It seems that he not serve unitl now. The device running and works well, the only problem is that the LCD appear only the iomega logo at the beginning but no info after this (white screen). When I reset the
-
a 90-Watt adapter is compatible with elitebook 8560w?
I need an adapter for my laptop, but when I search online, it gives me a lot of options. Which is the lighter adapter that works also!
-
How can I get the UAC to ignore programs that I hope?
HelloI have recently upgraded the hardware on my PC and that you have installed the new monitoring software provided with my motherboard. Now, every time I login, I am invited by the UAC for administrator password to allow this program to make change