Writing a VBS file for my office

Similar Questions

• 1310.error error writing to the file for CS2 install Win7 for Adobe Pro 7

  I have Adobe 7 Pro to be installed on a machine Win7 which is not supported by Adobe.  They provide a CS2 version with a new serial number for replacement of my product since my product cannot be activated anymore.

  When I try to install it, I get the following error after started the installation process.

  1310.error error writing to the file: C:\Program Files (x 86) \Adobe\Acrobat 7.0\Active X\AcroPDF.DEU.  Make sure you have access to this directory.

  I am the admin of my machine and I also tried to install their version as the admin as well.

  Any help to get through this?

  I wasn't able take the permissions of the folder Active X using one of the recommendations no matter how I tried to change the permissions.  Activa X file for some reason any was locking me even if I am the admin.  There were four files that were already saved in the folder as part of the installation process that was able to complete before my error popped up.

  A work around that worked for me is that I have renamed this file active X_old - I have at least managed to rename the folder, even if I was not able to change its permissions.  I created a new Active X folder and copied the four files in the original in the new.  I've then restarted the installation process, and it went through.  It seems that I have all the features of the Adobe 7 Pro.

• Try to recover Windows.old files for Microsoft Office applications

  I did a reinstall of Vista on my Dell laptop.  Previously, I did a clean install on XP to upgrade to Vista on a Dell Inspiron E1705.  Of course the Windows.old is still there on my C: / drive. I want to use my Office12 MS of the .old file; because I lost my installation disc.  I tried to copy the file on the desktop, on the advice of another Q & A forum.  It will not always open files.  What does the error "operating system is not currently configured to run this application" mean?

  Hello

  You can not copy programs from the windows.old folder

  It is only to recover data from

  You must reinstall the programs from the original media

  How to restore your personal files after you perform a custom Windows Vista or Windows 7 installation

  http://support.Microsoft.com/kb/932912

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• "error opening file for writing" C:docume~1\user\LOCALS~1\Temp\OpenCandy\OCSetupHlp.dll, as I am trying to install a program.

  I come with a message "error opening file for writing" C:docume~1\user\LOCALS~1\Temp\OpenCandy\OCSetupHlp.dll, as I am trying to install a program.

  Any ideas what is happening?

  Thank you

  Hi and thanks for your time.

  The program was an application to create your own music

  I don't have any problem installing other applications programs...

  The solution was a scan with malware bytes who discovered infected with the registry data.

  So I deleted it and after running a lot on the line scans, I deleted the program, I wanted to install.

  Everything is still better then...

• When I try to install the update from Add-in for Microsoft Office file validation, I have the following error Code 80070641

  Hello

  When I try to install the Add-in for Microsoft Office file validation update, I get the following error:

  "Code 80070641 Windows Update encountered an unknown error."

  I have had problems with the Windows Installer service and think it's maybe part of the problem.  I use Windows Vista Ultimate (32 bit).

  I tried Microsoft fix 50202, but it has failed, error: "the Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »

  How can I fix the problem with Windows Update?

  Thank you!

  I started a second thread in responses from microsoft I thought has a different problem, but he eventually be linked to this problem.  the resolution to this and second question are posted there: http://answers.microsoft.com/en-us/office/forum/office_2007-office_install/windows-installer-service-could-not-be-accessed/73261f27-273a-4b89-9106-3857b537e7ff

  Thanks for the help!

• What name of file in my documents is the sounds for microsoft office

  original title: sounds

  What name of file in my documents is the sounds for microsoft office

  Hello

  More help in the answers - Forums of Microsoft Office

  Answers - Microsoft Office Forums
  http://answers.Microsoft.com/en-us/Office

  See the instructions on the page to download below. Initially implemented in Word or Excel, and then it should work
  in other Office programs.

  Download hard disk - go to where you - do right click on - RUN as ADMIN

  Microsoft Office Sounds - this also works in Office 2010 (I have it loaded)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=c8bb981d-2a23-4d1a-8310-457c733be290

  I hope this helps.

• response of psr tmadmin: failed to get a temporary file for writing

  Hello

  I have a problem with my local Tuxedo instalation. My servers and services works fine but when I try to list them using psr (printserver) or printclient tmadmin response: pg: failed to get a temporary file for writing. Can you tell me where can I find the possible cause?

  Thank you,.

  main problem was no space in /var. thank you for your help.

• the .xml file will not hold the new version I am writing on the 'AIR for iOS settings' window on Flash cc 2015

  Hello

  I need to download a new version of my app on iOS, but the .xml file will not hold the new version I am writing on the 'AIR for iOS settings' window on Flash cc 2015. It keeps appearing as:

  <? XML version = "1.0".

  also when I try to download the new .ipa on iTunes Connect with the Application Loader, I get this message:

  "" "ERROR-ITMS-4238:"redundant binary Upload. " «"" "" There is already a binary download with release ' 1.0.0' train ' 1.0.0 ' "at SoftwareAssets/PreReleaseSoftwareAsset»»»

  The problem is not of Application Loader or iTunes Connect as when I open again the .fla and check the window 'AIR for iOS parameters' he continues to display the 1.0 version over and over again. If Flash isn't that save the .xml file.

  And it happens with all my other apps Android or iOS, old and new versions, all appear as <? XML version is "1.0" on the .xml file.

  Is anyone know how can I solve this problem?

  Thank you.

  There are two different values, the build number and version number. If you use a test flight, you can submit an update without obtaining a review by increasing the build number. If you are submitting an update to an application in iTunesConnect, you must increment the version number.

• Miss me the Office addin PDF update, using Outlook Office 2013 I had a tab to convert messages in PDF files, I've updated for Outlook Office 2016 and tag disappeared, in order to convert I first saved as Unicode Outlook and then PDF. Problem is onl

  Miss me the Office addin PDF update, Office 2013 Outlook I had a tab to convert messages in PDF files, I've updated for Outlook Office 2016 and tag disappeared, in order to convert, I have first to save as Unicode Outlook file, then PDF. Problem is that Outlook Office, rest of the Office programs are OK. Can you help me?

  Hi peters63853633,

  Acrobat XI is not compatible with Office 2016, please check compatibility doc. https://helpx.Adobe.com/Acrobat/KB/compatible-Web-browsers-PDFMaker-applications.html

  Kind regards

  Nicos

• I downloaded the latest version of the DNG Converter Camera Raw version 9.1.1 for windows. However, I get error install the update saying "error opening file for writing. Also on my help menu updates is not active?

  I downloaded the latest version of the DNG Converter Camera Raw version 9.1.1 for windows. However, I get error install the update saying "error opening file for writing. Also on my help menu updates is not active?

  If the installation program itself fails to open and run. Download it again maybe your current download is corrupted. Also, what OS you are using and you are an administrator with permission to install.

• Adpaters file for reading and writing have stopped processing files of...

  I can't get rid of unexpected behavior in my BPEL process. Until two days ago the BPEL file adapter was successfully to query for files and reading, now all of a sudden the files are not read. However, the BPEL process is active.
  Also, I just finished writing the last piece for the main BPEL process, in which a file out (csv) is supposed to be written. The file for writing adapter is do invoke successfully as well as the processing activity is happening, but I don't see the file in the directory specified in the UNIX system?
  
  Any thoughts?
  
  Kind regards
  Ilyas

  I think that the huge file would have been the cause. In 10.1.3.4, there are a few new methods for the management of large files.

  http://download.Oracle.com/docs/CD/E12524_01/Relnotes.1013/e12523/adapters.htm#CHDHJGHG

  I don't know how to get the status of the agent of activation, as it is usually a process by thing. When I have problems with activation agent I increase levels of newspaper for the activating agent. This is done in the configuration tab in the BPEL, BPEL admin console in older versions, pre 10.1.3.4.

  (1) it is the same process, but for outgoing, you use the outgoing file header. You can use an entitled to update the name of the file. Make sure that you add the variable to the invoke. Have you looked at the rejection for this Manager. Or is is a business logic that determines failure? This kind of thing can be done in the BSE.

  http://www.Oracle.com/technology/products/integration/ESB/files/ESB-transactions-ErrorHandling.PDF

  also the BSE headers

  http://www.Oracle.com/technology/products/integration/ESB/files/ESB-presentation-headers.PDF

  (2) in the file adapter and ftp, there is this notion of a trigger file. It may be useful for you.

  http://download.Oracle.com/docs/CD/B31017_01/integrate.1013/b28994/adptr_file.htm#CIAHAHDC

  see you soon
  James

• Update for MS office 2010 SP2 creates a lot of problems

  First of all, you can tell me how to determine if I have MS Office 32-bit or 64-bit?  I was invited by downloading 64-bit.

  When I downloaded the update for MS office 2010 SP2 suggested Windows he caused all sorts of problems.  File 2687455 kb download was for MS Office (64-bit) and now I'm wondering if it was good?  I may have MS Office (32-bit)?

  I have Windows 7 Home Premium, computer Office HP P7-1210, 64-bit SP1.

  Please can someone help?  I can't drag and drop the desktop icons, sometimes I lose control when I try to click on orders, and everything seems to freeze and other issues.  If I Ctrl + alt + delete and click Cancel, can I get back to the screen and I can control the cursor by clicking for a while.  Then everything goes haywire.

  CHKDSK only checks the State of the disk. Why not check the status of both file system operating system?

  Go to elevated (admin) dos permissions window. (right click command and click on run as administrator as shown in the following image) type sfc/scannow. Let completeion. Who takes care of all the system files that the System File Checker considered as corrupt.

  

  

  

  If all goes well with the OS system files for you, you should get the result seen in the following image. Run the System File Checker solves often strange questions.

  

• Set the format digital u32 when writing of TDMS files

  We use two meters of a PCI-6251, with two counters in the mode of angular position, to measure the angular positions of the two optical encoders 1000 per second for intervals of 10 to 20 hours.  We are writing to write files using PDM.  The files are very large, about 800 MB, but it is acceptable.  Convert us the TDMS files in .txt files, and then the data from .txt files are analyzed in Mathematica.

  My question is: How does one control the digital format of the data that is written in TDMS write?  At this moment we have two counters of the value of the product N = 10000 numbers U32 samples are then transmitted continuously to a TDMS file every 10 seconds.  The counters are using units of ticks (integers) and we would like to see whole in our data files.  We are convinced that the counters are producing U32 to the format number, since we see the correct U32 integers in the indicators on the front panel and we see labels on the value axis on our waveform graphs are integers, not real numbers.

  But it is also clear that Scripture TDMS puts double-precision (64-bit) numbers floating point in the PDM file, not numbers of U32.  The double-precision floating-point numbers cause our .txt files to be twice as big as they should be - these .txt files are half full with useless zeros and decimal points.  In addition, when you convert the U32 to double-precision real numbers, it seems to be a loss of precision as a result of writing of PDM, which is not acceptable.

  Our experience produces pairs of integers: U32 (or I32) format.  We could even get away with numbers I16.  Is it possible to get our data to stay in U32 (or same I16) format when they are written to the TDMS file?  What controls the digital numbers written to tdms?  Do all the numbers written in a PDM file end up being written as floating-point numbers double-precision?

  We use LabVIEW 8.2 on a PC running windows XP.

  If associate you TDMS write U32 data, data in the file will be U32. Floating-point conversion probably occurs when you read data from the file back. You can change this by plugging in a U32 empty table at the entrance of 'data type' reading PDM.

  You can check the data type in the file by examining the channel properties in the viewer of TDMS files. If NI_DataType is 7, given in the file are U32. If it is 10, data are floating point.

  Hope that helps,

  Herbert

• Strange backup data by writing in the file measurment

  Hi all

  I developed a simple program that allows you to view the data from one channel, but it saves the data, just at the moment where the data backup button. Data is saved through writing on a file measurment, but unfortunately there is something wrong because the recorded data are strange. In the attachment, there is the file VI and the recorded data.

  As you can see there are several header and dates are strange (i.e. of the registration date 23/12/1916) and I get a lot more sample that I should have. Why do this?

  Any suggestion is appreciated.

  23/12/1916

  Your many headers is perhaps for this reason:

  

• I can't install Windows updates security for Microsoft Office System 2007: 646 error Code

  I can not install the following Windows updates:
  Update for Microsoft Office System 2007 security:

  Update of security for Microsoft Office Excel 2007 (KB982308)
  Update of security for Microsoft Office InfoPath 2007 (KB979441)
  Update of security for Microsoft Office PowerPoint 2007 (KB982158)
  Update of security for Microsoft Office Word 2007 (KB982135)
  Update of security for Microsoft Office System 2007 (KB982312)
  Update of security for Microsoft Office System 2007 (KB982331)

  I get the error code 646.  If someone could help me, I would appreciate it.

  Hello

  Here's what I recommend you do:

  1. disable UAC (do this if you are using Vista or Windows 7, otherwise, go to step # 2). Comes down

  restrictions - turn it off completely.
  2 restart your computer for the change to take effect.
  3 re - download the update of security for Microsoft Office System 2007 (KB982331) from the link below:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=7f89a734-cda4-4abb-9a10-f6dfe560e8d0&displaylang=en
  4. install. It should work fine.
  5. If it still does not work, try to open all or part of your MS Office applications (such as MS Word, MS Excel, etc.).
  6. follow steps 3-4.
  7. If it still does not work, follow step # 3 again. After you download it, try unplugging your computer from

  Internet (unplug the internet cable or turn off the modem). Then, try to install the downloaded file

  (KB982331). It should work this time.

  Do the same for all the updates that come with KB982331, IF ANY.
  Let me know your results.

  WARNING: This is only a WORKAROUND and not a RESOLUTION. The resolution is displayed as soon as we have it.