WRK54G connection with iPhone problems

Similar Questions

• Satellite Pro A200 failing to connect with iphone via wifi hotspot

  My apologies if I get some of the jargon wrong, but I'm pretty useless when you want IT emits.

  I have a Satellite Pro A200 and had problems connecting to various wifi connections.
  The computer could see the wifi connection and connect to it, but I wasn't able to connect to the internet.

  The question of the Office was arranged by our IT support guy (security settings on the new router we too complex for my PC or something like that), but he has not been able to solve the problem of not being able to connect to my iphone to use the 'hotspot' via the wifi function.

  Someone there knows a way to solve this, or is it a simple fact of the laptop is too old and really need to update?

  Thanks for any help that anyone is able to give.

  > Someone know a way to fix this or is it a simple fact of the laptop is too old and really need to update?

  This isn't a question of the age of the laptop
  As far as I know not that support all mobile operators
  You should first ask your mobile operator if you can use the tethering service.

  If this would be supported in my mobile operator, then connect the iphone to the laptop first
  So that you have two options: you can use the BT connection (in this case check if computer laptop also supports BT) or via a USB cable that came with the iPhone.

  (PS: as far I know to attach is supported by iOS3.0 and higher)

  After that the iphone was connected to the laptop, you must activate the tethering on iphone.
  Under settings of-> network, you should see the option internet tethering it must be enabled.
  Now you should be able to see that in the Network & Center sharing control panel.

• iTunes problem to connect with iPhone

  When I scan for iPhone. Do not sync

  

  But when open the opsin

  Follow the instructions here > authorize computer in iTunes - Apple Support

  And make sure that iTunes is updated on your computer > get the latest version of iTunes - Apple Support

• PowerBeats 2 (wireless) connection with iPhone issues 6

  I currently have iOS 10.0.1 and a pair of wireless 2 PowerBeats headphones that I use at the gym. I tried to use the updater of beats without success to fix my connection problems. Whenever my iPhone 6 is face down, in my pocket, behind an obstacle, or generally out of line of sight of my 2 PowerBeats connection starts to act up by disconnection or broken.

  The is because the signal is blocked by what is between your iPhone and PB2.

• Satellite P100-434: wireless connection with Vista problem

  Just bought this laptop with Vista and so far could not get the wireless to connect, I have 3 other computers and they will all connect, I have reset the router and set up new accounts on other computers without problem, but unable to do it on the P100.

  I tried the new RADAR feature and will not pick up all the networks, but by trying to establish a new connection it shows that a wireless network is available but it is nameless, although my network is named, I took the passkey of the network so that it is open but still does not connect, LAN via ethernet fine work.

  Wireless switch is on, but when I drag off switching wireless says WE

  Hello

  I can't give you an exactly the answer why you cannot connect to your WLan with Vista because there are so many options that should be checked.
  But I think that you will find the solution yourself with a little help from the Microsoft Web site.

  Please see this site:
  Connect to a network with Windows Vista wireless
  http://www.Microsoft.com/technet/community/columns/cableguy/cg0406.mspx

  You will find many useful tips, screenshots and Tips how to connect to WiFi with Vista.

  Please post again if you have found the key

• connection with e250 problems

  Hello world! I am completely new to MP3 players, I say that from the beginning, but I am a member of several forums, so I don't know how it works.  I recently bought a refurbed e250 and seem to have problems. I have read the forums for about 2 hours now, but still to come in white, it is so why I write.

  Read here and looking at the back of my drive, it seems that I have a V1. When I connect to the computer, all I get is the pop for 'Autoplay - (L) Removable Disk", to collect my computer is not recognizing my drive.

  Reading the forums that I saw several times change my player mode MSC or MTP mode when the connection, but I do not have these options. When I go into my settings, I have 2 USB modes listed; USB - HID, which, if I get that I have the option of YES or no. Mode USB keyboard, which, if I go home, I have the multimedia Mode options, presentation Mode, Mode or browser or mouse. I went through all that and still get the same pop up on my pc.

  I also read to switch my player to lock (the button next to the headphone jack) and hold down button rewind connecting to the pc force in fashion, and that does not work either.

  I read also to switch to lock, press and hold the record button during the connection to reset the player, and that doesn't work anymore.

  I mention also, Rockbox installed on my drive there.

  I downloaded the firmware driver, and is not fimd my player either.

  Of course, that my drive does not work, I am able to listen to music, I can also listen to music on a memory card. I was not able to display photos or videos on my drive but. If I insert a video on my player, it will play sound but not video.

  So after all it hits, someone has another option, I can try to get my pc to find my drive? Oh yes, I've tried different USB ports as well as with no luck.

  If I leave it to the experts, can someone connect?

  The burning question here is the factor of Rockbox.  Gere most readers see some bizarre information in your message, especially if they are not Rockbox running.

  USB functionality has always been a little unpredictable when Rockbox is at stake.  For awhile, the player has been implemented to start in the original firmware for USB connectivity.  I have a lot of hours with original firmwares, but Rockbox is a bit challenging for me, because I spend the lion's share of my free time to work with the original SanDisk residing in my players code.

  The drive works normally when executing his own?  It seems that you are running in Rockbox.  Was the player shipped to you with the generation of Rockbox responsible?  If Yes, this is the first time I've heard.

  Your best solution is to consult the available user, as well as forums, rockbox.org Guide, the guide is a huge 170 pages , or so, last time I saw it.  The link for the guide to the left of the linked page.

  A word of wisdom is apropos on Rockbox forums, however.  They seem to have taken the phrase RTFM to heart (Note, this is a family forum, once you learn the etymological details of the acronym, you will notice that once you look in the mirror, your hair will be white like Charlton Heston in the ten commandments.)  I saw posters a bit reprimanded for asking what is obvious, but it is quite welcome here for several reasons.  Every day, I learn something that makes me feel Newbie all over again.

  I am convinced that, as some versions of Rockbox default USB via the 'OF' (secret word, which means the original Firmware in Rockbox circles), and others may 'dual boot', which means that you hold it< button="" while="" the="" sansa="" powers="" up,="" to="" start="" in="" the="" of. ="" again,="" this="" may="" or="" may="" not="" work,="" depending="" upon="" the="" build="" installed="" on="" your="" device. ="" batteries="" not="" included,="" and="" your="" mileage="" may="" vary,="" as="" they="" say. ="" the="" latest="" rb="" (rockbox)="" builds="" do="" have="" usb="" support="" if="" i="" read="" the="" forums="">

  Yet once, start in the OF can not work as I've described, but a search for 'dual boot' in Rockbox forums should help you.

  Rockbox looks like a lot of fun and there are enough stable ports (as they call it) for the most recent Sansas in the works, but personally, I think that a v1 e200 will be the ideal device to try it soon.  I've just been so busy with the latest machines...

  Uninstall Rockbox is also described in the linked site, and it can be reinstalled at will, you do not have the opportunity to bring your e200 firmware stock 01.02.18 or the 01.02.24, because it is much simpler to operate than with Rockbox, especially when learning how to operate the drive.

  Don't panic and pull the strings too harshly, for lack of a better term; all this will give is a knot tight to unravel.  Search the site for RB on the connection of your device, it will be in the user's Guide.  Perhaps some of the Hards to die here running Rockbox will have a time to chime!

  I am currently tinkering with the latest version of the Rhapsody customer.  Rhapsody has branched out on his own from RealNetworks and there are a lot of little details in this mixture.  I'm the last customer, it performs well its gait with the penetrating RhapPFS Sansas.  I got some errands injectors (Diesel) to build a TDI engine today, so I'll run, experimenting with injector of programming, but I'll pop in now and again.  As many projects and the Sun came out today too.

  Bob

• Problems with CDM - Tracert displaying a line and connection with FTP problems

  I am currently in a class of networking and server, so am pretty new to this.  I'm running a virtual PC with Windows 7 Professional 32-bit and a few problems with my command prompt.  When I use the tracert command, any URL that I use, it returns only a single line.  It also does not matter whether I run it as administrator.  Here is an example of what it returns:

  I also have problems to connect to a server by using FTP.  The mission was to connect to the FTP server of NASA and practice to transfer images on.  I am able to connect, but as soon as I use the 'ls' command that I am, it will expire or say "connection closed by remote host". I encountered this same problem on my PC at home on a regular basis as well.  I used a computer friend, followed the exact same steps and it worked very well on his own. Here's what I saw:

  Any help would be appreciated.  Thank you!

  Hello

  Thanks for posting your question in the Microsoft Community.

  The question you posted would be better suited in the TechNet Forums.

  I would recommend posting your query in the link below.

  Windows 7 networking:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  I hope that the information above helps you.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

• Strange connection with WRT54G2 problems

  As stated, I have a Linksys WRT54G2 (ver. 1).  The problem exists from the very beginning when I bought this router.  What is happening is that downstream data speeds slow down normal speed (11-15 Mbit/s) for barely more than 1 Mbps.  To temporarily correct the problem, I simply change the wireless channel.  When the channel is changed, my speed immediately return to normal 11-15Mbps (sometimes as high as 16 Mbit/s).  But here in 20 minutes, we at speeds just a shade over 1 MB/s.  Make lather, rinse, repeat.

  While looking for a real solution to the problem, I have:

  • Update the firmware on my router worm 1.0.04)is.  This does not resolve the issue.
  • Changed the type of wireless from WEP to WPA security.  This does not resolve the issue.
  • Past votes to zero WPA wireless security type.  This does not resolve the issue.
  • Changed IP address range of 50 machine from 192.168.1.100 to 10 machines from 192.168.1.150 (only 3 PC to connect to this router... when they are able).  This does not resolve the issue.

  Any ideas on this strange matter would be most appreciated!  Looking forward to your solutions!

  I searched the forum for you and found this info.

  In the router:

  Disable UPnP.  Under settings wireless Beacon Interval 75, RTS and Fragmentation threshold to 2304.  Save the settings, then try channel 1 or 11.  Try this.

• Connectivity with oracle11gr2 problem

  Hello

  I installed oracle 11g on redhat linux 6.4 machine.now I am trying to connect to this database server form windows remote machine but it gives me connection error.

  (I use the odbc driver for connection)

  
  

  denied connection check the password and host host name

  ORA-12203 unable to connect to the destination.
  

  I checked my interlocutor is established and running and I also managed to connect to sqlplus command and able to question him.

  
  

  
  

  so, I use the trcroute command and it gives following error. (on the database machine)

  [oracle@LOM-NEYTR-RHEL-NEW1 dbhome_1] $ trcroute 10.153.0.137

  Trace Route utility for Linux: Version 11.2.0.1.0 - Production on May 9, 2014 09:53:44

  Copyright (c) 1995, 2009, Oracle.  All rights reserved.

  TrcRoute road:

  ------------------

  Node: The customer time and entry into node address:

  -------------------------------------------------------------

  MAY 9, 2014 09:53:44 ANSWER = PROTOCOL = TCP HOST = 10.153.0.137 PORT = 1521

  AMT-12206: TNS: received a TNS error during navigation

  AMT-12537: TNS:connection closed

  AMT-12560: TNS:protocol adapter error

  AMT-03601: failed in the collection of information of itineraries

  and when I use tracert comand of windows machine it results in the trace

  output:

  C:\users\administrator > tracert 10.153.0.137

  The route to LOM-NEYTR-RHEL-Nouvelle1 [10.153.0.137]

  with a maximum of 30 hops:

  1 1 ms 1 ms 1 ms 192.168.234.1

  2 < < < 1 ms 10.100.2.9 ms 1 ms 1

  3 < < < 1 ms 10.100.1.1 ms 1 ms 1

  4 4 6 ms 4 ms 152.176.112.141 ms

  5 225 ms 227 227 ms 68.136.70.245 ms

  6 ms 231 229 ms ms 224 68.136.70.246

  7 224 ms 223 224 ms 10.147.16.6 ms

  8 224 ms 226 224 ms 10.146.252.122 ms

  ms 9 225 ms 224 224 ms LOM-NEYTR-RHEL-Nouvelle1 [10.153.0.137]

  Full trace.

  does anyone have an idea about this error connection?

  I look first in the Linux firewall and disable it if it is enabled. Can you confirm for me that the Linux machine is not using any firewall?

  Aman...

• two drivers of PXI chassis with Configuration problem

  Hello

  I have two PXI chassis. One is PXI 1033 and works perfectly with the NI PXI-5404, 5105, 6509, 1409, installed 8336. The other is 1036 PXI with the PXI-5404 NI, 8366 installed. When I was trying wreath connect, as master 1033, 1036 as slave, I found several problems.

  1. in the Measurement & Automation Explorer, does not have my good guys in 1033. Instead, there is a sign of the Red Cross in bottom right with 6509, 5105, 5404.

  2. I can't find an another 5404 of the 1036. In fact, I can't find 1036 in MAX.

  Update BIOS. My PXI system is already identified under the name 'NOR PXI - 1033 Embedded MXI Express' and Chassis1 is identified as 'NOR PXI 1033'.

  So I made several tests as below:

  1. unscrew the 5404 1036 slave. MAX can configure 2 1036 chassis. Ok. But when I reconnect 5404 in 1036, same result happened as stated above.

  2 uninstall the driver of 5404, so the 5404 in 1033 does not either now. And then reboot again, same result happens again. Cannot detect the 1033 chassis. Other vouchers in 1036 don't work either.

  Please, any suggestion is highly appreciated.

  Sincerely,

  Bin

  Hi Ben,

  This happens sometimes with MXI-Express:

  Error code 12 with MXI-Express

  http://forums.NI.com/T5/PXI/two-PXI-chassis-connection-with-configuration-problem/m-p/1475876#M9033

  In general, you can read this error 12 means on Device Manager:

  Explanation of error codes generated by Device Manager in Windows XP Professional

  http://support.Microsoft.com/kb/310123

  If it was a problem of bandwidth, PCI or PXI side, you could pull a few cards to see if that alleviates the problem, or that the link from Microsoft over the States, you can disable the driver for other cards.

• problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  Problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  On the Pro iPad, tap settings > general > reset > reset network settings

  You will need to re enter your Wi - Fi password.

  Then try to connect to your Wi - Fi network.

  If this does not help, more available in this support article suggestions > If your iPhone, iPad or iPod touch connects to a Wi-Fi network

• iPhone 5 s to connect with blue tooth in the car for hands-free calling does not connect to the speaker, it works very well with the iPhone 5. How to solve this problem?

  IPhone 5 IOS 9.2 (13 c 75) I can log in my car with Blue Tooth to make phone calls, but it does not connect to the speaker. To establish the connection with the car, the procedure has been completed correctly. With the iPhone 5 it works perfectly correct.

  How to solve this problem? Is there someone who has the same problem?

  Howdy,

  Thank you for using communities Support from Apple.

  I see you try to get your iPhone to interface with the stereo in your car via Bluetooth.  For setting this up, please follow the steps below.

  If you use Bluetooth

  1. Consult the user manual of your car stereo to get the procedure to a Bluetooth device.
  2. On your iOS device, drag up to open Control Center, then press ontwice to turn on Bluetooth and turn it back on.
  3. Restart your iOS device.
  4. On your iOS device, Cancel the twinning of your car radio. On the screen of your car désapparier your iOS device and any other device. Restart your car and your iOS device, then pair and connect again.
  5. Update your iOS device.
  6. Install the updates to the firmware of your car radio.
  7. If you still not connect, contact Apple technical support.

  Help to connect your iPhone, iPad or iPod touch with your car radio

  See you soon.

• Asslam o aliakum. I have a problem with itunes 12.3.2 it is not downloaded the 10 windows and when I connect m iphone with itunes and want to update to 9.2 says please download itunes new version for ios 9.2... help me with this... How to solve this probl

  Asslam o aliakum. I have a problem with itunes 12.3.2 it is not downloaded the 10 windows and when I connect m iphone with itunes and want to update to 9.2 says please download itunes new version for ios 9.2... help me with this... How to solve this problem.

  Greetings Dani56777,

  Thank you for using communities Support from Apple!

  I understand that you run Windows 10 and you must update iTunes to the latest version so that your iPhone will be recognized when connected. I do not know if you receive an error when you try to update iTunes or not.

  If you need information on how to update iTunes, please follow the instructions in the following link.

  Download the latest version of iTunes for Windows - Apple Support

  If you receive an error or alert, you can consider removing iTunes and all of its associated components and then reinstalling fresh iTunes on your computer. That would give you the latest version of iTunes. If you need execute this process, please follow the steps described in the following article.

  Remove iTunes Control Panel and its associated components

  Use the control panel to uninstall iTunes and software components in the following order:

  1. iTunes
  2. Apple Software Update
  3. Apple Mobile Device Support
  4. Hello
  5. Apple Application Support 32-bit
  6. Apple Application Support 64-bit

  On some systems, iTunes can install two versions of the Apple Application Support. What is expected. If both are present, do not forget to uninstall both versions.

  Do these elements in a different order, uninstall or uninstall only some of them. This could have unintended effects. After you uninstall a component, you may be asked to restart your computer. Wait to restart your computer until you finish remove all components.

  Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

  Have a great day!

• having problem to connect with itunes and update my iphone

  I have problem to connect with itunes and update my iphone. Everyone that nows how to fix this?

  What do you mean by communicating with itunes?

  In any case, ask in the Forums of Apple:
  https://discussions.Apple.com/index.jspa

• Problem with iPhone and iPad ios10 connect with iTunes version 12.2.2

  Yesterday, I upgraded my iPhone and iPad to ios10 successfully. However, when I try to connect to my Macbook OSX version 10.7.5 running with iTunes version 12.2.2.25 it gave me this error "iTunes could not connect to the iPad because an invalid response was received from the device." I got the same error when I connect my iPhone as well.

  Now I can't restore my iPad or iPhone in low-grade IOS because iTunes can not see my devices.

  Someone at - it this experience after upgrade to ios10?

  Hi Had3s,

  I understand that after updating to iOS 10, your MacBook is more recognized in iTunes. I know it's important to be able to sync your iPhone with iTunes, so I'm happy to help you.

  Read this article that covers some common troubleshooting for this issue:
  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

  Note that the likely cause here is an older version of iTunes. Since iOS 10 is still new, it is important to have the latest version of iTunes installed. Currently, it is 12.5.1, that requires OS X 10.9.5 or later version must be installed:
  iTunes - download iTunes - Apple

  Since you currently have OS X installed 10.7.5, you'll want to update to OS X as well. You can see more info on how to upgrade to the latest version of Mac OS X here:
  Update of OS X El Capitan - Apple Support

  Thank you for using communities Support from Apple. See you soon!