connection with e250 problems

Similar Questions

• Satellite P100-434: wireless connection with Vista problem

  Just bought this laptop with Vista and so far could not get the wireless to connect, I have 3 other computers and they will all connect, I have reset the router and set up new accounts on other computers without problem, but unable to do it on the P100.

  I tried the new RADAR feature and will not pick up all the networks, but by trying to establish a new connection it shows that a wireless network is available but it is nameless, although my network is named, I took the passkey of the network so that it is open but still does not connect, LAN via ethernet fine work.

  Wireless switch is on, but when I drag off switching wireless says WE

  Hello

  I can't give you an exactly the answer why you cannot connect to your WLan with Vista because there are so many options that should be checked.
  But I think that you will find the solution yourself with a little help from the Microsoft Web site.

  Please see this site:
  Connect to a network with Windows Vista wireless
  http://www.Microsoft.com/technet/community/columns/cableguy/cg0406.mspx

  You will find many useful tips, screenshots and Tips how to connect to WiFi with Vista.

  Please post again if you have found the key

• Problems with CDM - Tracert displaying a line and connection with FTP problems

  I am currently in a class of networking and server, so am pretty new to this.  I'm running a virtual PC with Windows 7 Professional 32-bit and a few problems with my command prompt.  When I use the tracert command, any URL that I use, it returns only a single line.  It also does not matter whether I run it as administrator.  Here is an example of what it returns:

  I also have problems to connect to a server by using FTP.  The mission was to connect to the FTP server of NASA and practice to transfer images on.  I am able to connect, but as soon as I use the 'ls' command that I am, it will expire or say "connection closed by remote host". I encountered this same problem on my PC at home on a regular basis as well.  I used a computer friend, followed the exact same steps and it worked very well on his own. Here's what I saw:

  Any help would be appreciated.  Thank you!

  Hello

  Thanks for posting your question in the Microsoft Community.

  The question you posted would be better suited in the TechNet Forums.

  I would recommend posting your query in the link below.

  Windows 7 networking:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  I hope that the information above helps you.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

• Strange connection with WRT54G2 problems

  As stated, I have a Linksys WRT54G2 (ver. 1).  The problem exists from the very beginning when I bought this router.  What is happening is that downstream data speeds slow down normal speed (11-15 Mbit/s) for barely more than 1 Mbps.  To temporarily correct the problem, I simply change the wireless channel.  When the channel is changed, my speed immediately return to normal 11-15Mbps (sometimes as high as 16 Mbit/s).  But here in 20 minutes, we at speeds just a shade over 1 MB/s.  Make lather, rinse, repeat.

  While looking for a real solution to the problem, I have:

  • Update the firmware on my router worm 1.0.04)is.  This does not resolve the issue.
  • Changed the type of wireless from WEP to WPA security.  This does not resolve the issue.
  • Past votes to zero WPA wireless security type.  This does not resolve the issue.
  • Changed IP address range of 50 machine from 192.168.1.100 to 10 machines from 192.168.1.150 (only 3 PC to connect to this router... when they are able).  This does not resolve the issue.

  Any ideas on this strange matter would be most appreciated!  Looking forward to your solutions!

  I searched the forum for you and found this info.

  In the router:

  Disable UPnP.  Under settings wireless Beacon Interval 75, RTS and Fragmentation threshold to 2304.  Save the settings, then try channel 1 or 11.  Try this.

• Connectivity with oracle11gr2 problem

  Hello

  I installed oracle 11g on redhat linux 6.4 machine.now I am trying to connect to this database server form windows remote machine but it gives me connection error.

  (I use the odbc driver for connection)

  
  

  denied connection check the password and host host name

  ORA-12203 unable to connect to the destination.
  

  I checked my interlocutor is established and running and I also managed to connect to sqlplus command and able to question him.

  
  

  
  

  so, I use the trcroute command and it gives following error. (on the database machine)

  [oracle@LOM-NEYTR-RHEL-NEW1 dbhome_1] $ trcroute 10.153.0.137

  Trace Route utility for Linux: Version 11.2.0.1.0 - Production on May 9, 2014 09:53:44

  Copyright (c) 1995, 2009, Oracle.  All rights reserved.

  TrcRoute road:

  ------------------

  Node: The customer time and entry into node address:

  -------------------------------------------------------------

  MAY 9, 2014 09:53:44 ANSWER = PROTOCOL = TCP HOST = 10.153.0.137 PORT = 1521

  AMT-12206: TNS: received a TNS error during navigation

  AMT-12537: TNS:connection closed

  AMT-12560: TNS:protocol adapter error

  AMT-03601: failed in the collection of information of itineraries

  and when I use tracert comand of windows machine it results in the trace

  output:

  C:\users\administrator > tracert 10.153.0.137

  The route to LOM-NEYTR-RHEL-Nouvelle1 [10.153.0.137]

  with a maximum of 30 hops:

  1 1 ms 1 ms 1 ms 192.168.234.1

  2 < < < 1 ms 10.100.2.9 ms 1 ms 1

  3 < < < 1 ms 10.100.1.1 ms 1 ms 1

  4 4 6 ms 4 ms 152.176.112.141 ms

  5 225 ms 227 227 ms 68.136.70.245 ms

  6 ms 231 229 ms ms 224 68.136.70.246

  7 224 ms 223 224 ms 10.147.16.6 ms

  8 224 ms 226 224 ms 10.146.252.122 ms

  ms 9 225 ms 224 224 ms LOM-NEYTR-RHEL-Nouvelle1 [10.153.0.137]

  Full trace.

  does anyone have an idea about this error connection?

  I look first in the Linux firewall and disable it if it is enabled. Can you confirm for me that the Linux machine is not using any firewall?

  Aman...

• WRK54G connection with iPhone problems

  I have a Setup WRK54G and it keeps asking for a password on my iPhone. I have the security mode implemented as WPA pre-shared as TKIP. I tried to enter my security key for the password, but that didn't work. I changed to WEP and tried the first WEP key as password. Still nothing. I even reset the factory settings. Any ideas?

  Make sure the MAC filter is turned off on the WRK and try to connect.  If still the issue, the hard reset the WRK and power cycle it.  Reconfigure from scratch and try to connect again.

• two drivers of PXI chassis with Configuration problem

  Hello

  I have two PXI chassis. One is PXI 1033 and works perfectly with the NI PXI-5404, 5105, 6509, 1409, installed 8336. The other is 1036 PXI with the PXI-5404 NI, 8366 installed. When I was trying wreath connect, as master 1033, 1036 as slave, I found several problems.

  1. in the Measurement & Automation Explorer, does not have my good guys in 1033. Instead, there is a sign of the Red Cross in bottom right with 6509, 5105, 5404.

  2. I can't find an another 5404 of the 1036. In fact, I can't find 1036 in MAX.

  Update BIOS. My PXI system is already identified under the name 'NOR PXI - 1033 Embedded MXI Express' and Chassis1 is identified as 'NOR PXI 1033'.

  So I made several tests as below:

  1. unscrew the 5404 1036 slave. MAX can configure 2 1036 chassis. Ok. But when I reconnect 5404 in 1036, same result happened as stated above.

  2 uninstall the driver of 5404, so the 5404 in 1033 does not either now. And then reboot again, same result happens again. Cannot detect the 1033 chassis. Other vouchers in 1036 don't work either.

  Please, any suggestion is highly appreciated.

  Sincerely,

  Bin

  Hi Ben,

  This happens sometimes with MXI-Express:

  Error code 12 with MXI-Express

  http://forums.NI.com/T5/PXI/two-PXI-chassis-connection-with-configuration-problem/m-p/1475876#M9033

  In general, you can read this error 12 means on Device Manager:

  Explanation of error codes generated by Device Manager in Windows XP Professional

  http://support.Microsoft.com/kb/310123

  If it was a problem of bandwidth, PCI or PXI side, you could pull a few cards to see if that alleviates the problem, or that the link from Microsoft over the States, you can disable the driver for other cards.

• Connection with the Apple ID server problem

  iCloud on my ASUS ZENBOOK can not connect.  It always returns a connection error message: there is A PROBLEM CONNECTING WITH THE APPLE ID SERVER.

  My laptop is an ASUS model UX303L (64-bit) running Windows 10 Home, Version 1511.

  Key points:

  (1) I have connected to my very well through several iPhones iCloud account, multiple iPads, an iMac and another ZBOX PC running the same version of Windows 10.  (Confirms that it is not a problem of "User" with me trying to use the wrong password).

  (2) from my laptop problem, I can connect to the internet fine iCloud - Chrome and Firefox version by.

  (3) I have the latest version of iTunes on the laptop, which starts very well and logs in my iTunes store (.. .in the Australia).  [This is interesting, because I guess that both iTunes and iCloud connect to the same server Apple ID to check the details].

  (4) I made sure that Windows is completely up to date, and that my office 2013 is also entirely up-to-date, with a full stop/restart of the laptop to make sure that nothing is installed in half.

  (5) I uninstalled iCloudand reinstalled from a new download.  Did not help.

  (6) before the iCloud upgrade to the latest version there is + 2 weeks (I'm now on the 5.2.1.69 Version), iCloud worked perfectly, including the good synchronization of Outlook calendar and favorite contacts on different browsers.  I want to try and reinstall the old version - see if that restores me to my nirvana earlier, but I couldn't find anyway to do.

  Suggestions as to best 'next steps', I can take would be highly appreciated...

  I have exactly the same problem... is there any help for us?

  So far, I've been forced to use Windows 7

• problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  Problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  On the Pro iPad, tap settings > general > reset > reset network settings

  You will need to re enter your Wi - Fi password.

  Then try to connect to your Wi - Fi network.

  If this does not help, more available in this support article suggestions > If your iPhone, iPad or iPod touch connects to a Wi-Fi network

• Connectivity with AT &amp; T-Motorola 3360 and Airport Extreme problems

  Bought a new extreme-Airport (7.7.3) to replace my old AE after 9 years of service.  The installation procedure, but could not get the airport to connect with my modem (Motorola 3360).  Called at & T and they crossed put me the modem in Bridge mode and which seemed to work.  But only temporarily (about 5 hours).  Restart the modem and the airport was not working.  Troubleshooting I tried to plug my MacBook directly into the modem, but even the computer couldn't get an internet connection.  Another call to AT & T and they reconfigure the modem to their end.  After 90 minutes and try everything they could, they have finally admitted defeat and told me that they could not solve the problem.

  However, after a fairly exhaustive search of this forum, seems to be two issues that many people is with Airport extreme.  One is that the modem (in this case a Motorola 3360) is perhaps not fully compatible with the airport.  The AT & T support person was not aware of this until I asked about it, so she did a quick search and was rather surprised to see that there is a lot of people having problems with the Motorola Modem.  She told me that they use no more Motorola modems but ship the 6200 of Netgear.  "All know issues?", I asked.  She sought and, to his surprise, even once, there was.

  So, first question.  Does anyone know a modem that is compatible with the airport or use one that they had to limit problems with?

  The second question prevailing seems to be with the IPv6 protocol.  Anyone know if there are problems with the AT & T IPv6 protocol and the most extreme airport?  I did not disable IPv6 yet to see if that helps.  I thought I'd ask here first.  Couldn't find anything on the AT & T site.

  When I return from the road (great place to go to get away from technology) I will make a new round of full power of all the components and try Setup again from scratch.

  Any ideas or suggestions would be greatly appreciated.  Miss all know profanity.

  Thank you.

  Any other relevant information: 6.3.1 the utility Airport, Airport Extreme 7.7.3, MacBook Pro running 10.8.4, modem Motorola 3360, AT & T high speed DSL, shoe size 11-1/2 wide.

  When you have configured the 3360 as a 'bridge', this would mean that the AirPort Extreme should then be put in place to provide the PPPoE connection service. The airports are not known for their reliability in this type of installation... no matter the type of modem that you can select, so I drop this method as a connection option.

  If you want to keep the 3360... and you have time to experiment... then you can set the 3360 to its original default settings and configure the router from the airport most convenient to connect using DHCP in router Mode of DHCP and NAT.  That will produce what is called a message Double NAT, but maybe it's not of concern on a simple home network, and Apple provides you with the option 'Ignore' the Double NAT, so the airport will display a green light instead a light orange blinking slow.

  You need to try this configuration for a few days to see if the Double NAT will be a problem or not, because it is not possible to predict the effect of a Double NAT on a network... you have to test a few days see how things behave.  If this configuration works well, for you, then you can leave it as what.

  Please note that I do not recommend this type of installation, just suggesting it as an option this work could , if you want to keep the 3360.

  How Double NAT affect IPv6, I can't tell, since I did not use att for several years, and I'm not familiar with their implementation. On wired, IPv6 works fine on the airport with Comcast and Time Warner.  We can provide these parameters for you if want, but have no idea how well... (or if)... they will work with ATT.

  If the installation of Double NAT does not work, your best option would be to go there and get a modem/router or gateway to ATT device and then set up the most convenient airport in Bridge Mode works correctly with the modem/router ATT.  You will turn on the routing of ATT function in this type of installation, but the airport can also produce a signal from the wireless network that you can use.  The modem/router ATT will also provide a wireless signal that you could use for guests, or disable the feature, if you do not need two wireless networks.

  This may also be the best option if you want to configure IPv6 as IPv6 of ATT service must be compatible with the modems/routers and gateways.

• Internet connectivity with iOS 9.3 problems

  I have an iPhone handset 6

  Since the update the handset does not connect to the internet.

  Indeed, despite a complete network redefined and, when the connection through wifi to my router at home and tries to access the internet - no luck!

  IPhone 6 combined - still on the old version - disorder web access my wife.

  I can only put it down to the upgrade and the information circulating on the net about similar issues.

  The iTunes doesn't seem to recognize that there is a more recent patch for the 9.3 iOS version 13E233. Some sites there indicate iTunes should detect a fix updated since this original version. I saw the reference to 13E234.

  Help, please. Frustrating that *!

  iOS updates regularly change of variables operating system which, from time to time, will affect negatively other parameters and the features of the component on the device (including WiFi).  In addition, this can be a problem with your carrier and the specifics of your plan data or of the SIM card in your device settings that need to be addressed or refreshed.  To update the carrier settings, place a call to your carrier and place them on your device.

  This particular issue on the side of the Apple of street connectivity has been surfacing regarding the update and its been mainly a question of the environment such as WiFi access or your router (s) your help, I've had this as well and here are the most effective steps, I can give you to solve.

  WiFi/Internet environment

  1 restart your router

  2. check the latest version of the firmware on the router (router manufacturer and manual will have instructions on this one)

  Apple IDevice

  3. remove the WiFi access point of your iDevice which is the blue tick, if its power to establish at least a connection with your internet facing router it is a very practical and viable step to achieve. Settings > WiFi > * WiFi Access Point name * > forget this network (another option is to simply renew the lease, which will be used in blue at the bottom of this screen) my recommendation is to forget this network and let your iDevice and the router to build a new pile of access point.

  4. (optional if nothing above has solved the problem on this point) reset network setting on your iDevice, you will probably need to provide credentials for your router here.  Settings > general > reset > reset network settings > restart

  5. last resort to restore your device using iTunes, using iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory - Apple Support

  It is a fairly complete set of instructions to identify it's a software or a configuration issue with your device.  If after that you had accomplished each of these steps, the problem is not resolved, move to consider a repair like the WiFi hardware physically in the device may be damaged.

  See you soon

• OfficeJet 6600 e-all-in-one: Wireless connectivity with the new router problem

  We had the printer since 12 months, workin with no problems.

  Just got a new modem/router (NETGEAR V7610) installed as part of the NBN implementation and I can't get the printer to connect to the new router. 5 and 2.4 G active networks. The two defined newtorks on security WPA2-PSK [AES].

  The printer detects the wireless (2. 4 g) network, but can't coplete the connection. Tried the two direct input the network key and using WMA.

  -The display panel shows "wireless invalid password (WPA) is entered.

  -The results of network printer test page indicates a FAILURE on safety.

  I was able to connect to multiple other devices (laptop, iphone, Kindle...) without any problem. Used the two direct entry of the key network and WMA.

  Anything else I can try?

  Find a new update of the firmware for the printer (May 9, 2016).

  After you apply the update, the printer is able to connect to the new modem.

• is "is there a connection with the server problem", in El Capitan

  Hi guys,.

  I've tried to sort myself but up to now no joy... :-(

  I'm under El Capitan on a MacBook and for weeks I need to install a specific program through CDROM connected with my old Mac Mini (Tiger) via my WiFi use it as a hard drive external.

  Everything worked fine, but then I get this annoying message "there was a problem connecting to the server...". »

  So far on:

  1. the service of Mac Mini is not listed in the connection points

  2. the Mac mini is no longer connected to my network

  It seems that this message has something to do with my iCloud service, I tried to unplug and deletion and fixed but as soon as I have reactivated iCloud began to burst once again.

  Any suggestion?

  Thank you

  Sebastiano

  Have you tried to remove the software that you have installed as instructed by the developer?

• iPhone 5 s to connect with blue tooth in the car for hands-free calling does not connect to the speaker, it works very well with the iPhone 5. How to solve this problem?

  IPhone 5 IOS 9.2 (13 c 75) I can log in my car with Blue Tooth to make phone calls, but it does not connect to the speaker. To establish the connection with the car, the procedure has been completed correctly. With the iPhone 5 it works perfectly correct.

  How to solve this problem? Is there someone who has the same problem?

  Howdy,

  Thank you for using communities Support from Apple.

  I see you try to get your iPhone to interface with the stereo in your car via Bluetooth.  For setting this up, please follow the steps below.

  If you use Bluetooth

  1. Consult the user manual of your car stereo to get the procedure to a Bluetooth device.
  2. On your iOS device, drag up to open Control Center, then press ontwice to turn on Bluetooth and turn it back on.
  3. Restart your iOS device.
  4. On your iOS device, Cancel the twinning of your car radio. On the screen of your car désapparier your iOS device and any other device. Restart your car and your iOS device, then pair and connect again.
  5. Update your iOS device.
  6. Install the updates to the firmware of your car radio.
  7. If you still not connect, contact Apple technical support.

  Help to connect your iPhone, iPad or iPod touch with your car radio

  See you soon.

• Wireless LAN on Equium A210-1AS connection with WPA-TKIP encryption problem

  I have a 1AS Equium A210 with Vista but cannot connect to the internet via a wireless router cable modem NTL using WPA-TKIP encryption and 5600 philips.

  The laptop shows the base station wireless with a beep sound intense but said that the base of the station is not responding or is hidden when I try to connect to the internet.

  I'm using the correct password.
  I am able to connect to the internet via the base station when connected via the ethernet cable. Other old computers connect wireless with no problems.

  I heard that some combinations of chipsets with Vista can be the cause of some of these issues.

  Clear advice or ideas on what I could try to get wireless internet would be greatly appreciated.

  Have you checked to connect the laptop to the router WLan with WPA encryption settings? Please do. You must disable the WLan encryption to test the WLan connection

  If the laptop could connect properly, then encryption is certainly the reasons why the laptop can not establish the WLan.

  Maybe your wireless network card does not like this on the encryption support or you simply have to update the Windows operating system and the driver WLan.