WRT1900AC devices cannot see 3 strings of numbers.
I had a net machine r7000 nighthawk that has undergone a surge that extinguished the 5 GHz radio, I replaced with the same model, but none of my android devices still saw the 5 GHz range. I replaced it and still thinking it was a problem with this model, but the problem persisted. Bought the wrt1900ac and the same problem persists, but if I manually change the channel on the range of 5 GHz to a 2 digit channel, they connect well, it is possible that even if a device says it can use 5 GHz maybe may not see the higher channels frequency? Thanks for any help.
OK understand... kind of early in the morning here. Laughing out loud...
If you do not have the higher channels, but when you use them on the router, your device work not good with them is that correct?
What wireless modes do you currently use? Please post a photo of the settings of the router wireless.
If this has happened on other routers of the Lim with your devices, it is possible that there is a form of ongoing interference or your devices cannot correctly process the higher channels.
Tags: Linksys Routers
Similar Questions
-
Other bluetooth devices cannot see the Satellite A200-psae63
Hi all.
I have laptop Toshiba Satellite A200-psae63 and the following problem:
I installed the new driver for bluetooth for my model, bluetooth monitor 3. In bluetooth settings I put that other bluetooth devices can see computer.But they do not.
They only see it when I click the file recevi on my bluetooth icon in the status bar.I tried to reinstall the driver again, but the problem is the same.
Can someone help me?
Hello
Please note that you will need to install the BT stack too and not only BT monitor.
In addition, don't forget that your BT is activated by pressing the FN + F8 keySee you soon
-
I'm playing with the device of vCenter 5.5 (studying if it is possible to move the device to Windows hosted vCenter). We are running 5.0 vCenter, so I have no experience with SSO to date. I've joined with success the vCenter for AD unit (I can see the object in AD) and then I added our field as a source-SSO in vCenter. I made sure to use a host name COMPLETE of the device that I've seen a few problems with join the domain if the hostname was not in FQDN format. When I set up SSO, I used "Active Directory (Integrated Windows Authentication)," and then "use machine account" - which, from what I understand, all that is necessary is that I joined the field of unit - which, as I said, seems joining our field. When I added the SSO domain, there is no errors and I now see in the list. So as far as I know, the configuration for the SSO was entirely free of errors.
However, when I try to add resources to AD to vCenter (for example to add ad users/groups to the vCenter administrators group or assign role permissions to objects in vCenter) navigation for our domain window just, hangs in the web interface, I see a little blue bar progress turns forever and in the Windows GUI for vSphere client the browser window just hangs and I have to kill the process.
I missed a critical step in the configuration of SSO for AD? I'm not supposed to use "computer account"?
Any help is appreciated.
NK
I had the same problem as you and and the fixed by adding a PTR DNS for a Windows domain controller in DNS. I came across a VMware troubleshooting document (not exactly the same problem, I had) and I gave it a try and it solved my problem.
-
WRT1900AC cannot see Wireless Bridge
Hi all...
I have a WRT1900AC (FW 1.1.8.161917) the router and wish to connect a wireless bridge that is connected to my DirecTv box. I have an old WRT54G ver 3.1 running DD - WRT which I did in a wireless bridge. I have good connectivity to and from the DirecTv box, but no connectivity to my gw wireless which is my WRT1900AC. The WRT1900AC can't see the wireless gateway that is. I have triple checked that I have the identifier SSID is correct and the security in the WRT54G wireless setting and even tried to use an old bridge G from Linksys to connect wireless and the exact same problem occurs when. No device can see other wireless. I suspect the WRT1900AC as the source of the problem. Wireless gateways both try to connect 2.4 Ghz radio.
Any ideas? Thanks in advance.
-Andy
Reset the DirecTV box and we're ready now.
-
Map #2 Microsoft Tun Miniport
This device cannot start. (Code 10) Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.
???Hi AnaSk,
(1) since when are you facing this problem?
(2) remember to make changes?
The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows.
Download and install the latest drivers from the computer's network adapter or the website of the manufacturer of the device.
See the article below
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104 -
Teredo Tunneling Pseudo-Interface - This device cannot start. (Code 10)
Original title: code10microsoft toledo tunnelling
We think we've found a driver but we are not sure because he vomits again code.10
Hello
1. don't you make changes to your computer before this problem started?
2. What is the brand and model number?
If the device has a FailReasonString value in its hardware key, that string is displayed in the error message. The driver or enumerator places this registry string value there. If there is no FailReasonString in the hardware key, you receive the following error message: this device cannot start. (Code 10)
You can try the following steps and check if that helps you solve the problem.
Method 1:
Open the Device Manager and the analysis of new hardware and select 'Show hidden devices' in the view menu and check if you find errors.
a. Open command prompt with administrator credentials (type CMD and right - click Run as administrator).
b. Type "netsh" and ENTER.
c. Type "int teredo" and ENTER
d. type 'set disabled state' and ENTER.
e. open the Device Manager and uninstall "Teredo Tunneling pseudo-interface".
f. Open command with administrator credentials prompt once more.
g. type netsh + ENTER.
h. Type "int ipv6" + ENTRY
i. type 'set teredo client' + ENTRY
j open the Device Manager and the analysis of new hardware.
k. Select 'Show hidden devices' in the view menu. You will see now that she is present without errors.
Method 2:
If the steps above do not help, you can try to uninstall the drivers of the computer network and reinstall and check if that helps. Before uninstalling the network drivers, make sure that you download the latest drivers on the site of computer manufacturers. Follow the steps below to uninstall the network adapter.
Follow the steps below to uninstall and reinstall the network card.
a. click on start
b. in the type of search box of start of "devmgmt.msc" and press enter
(c) in Device Manager, expand network adapters
d. right-click on the network adapter and uninstall.
e. restart the computer, and then reinstall the network card.
Note: When uninstalling device drivers make sure you put a check mark against 'delete the driver for this device '.
I hope this helps.
-
Code 10 device cannot start after Windows update.
Original title: had this application update 26509 operation message
I hope that I chose the right place for this question
By PAD so I give you all the unusual things that have occurrred recently
When I clicked shut off (to turn off the computer) last night I received a message something like this but this isn't verbaitim.
-apply the updates do not turn off or disable... Let him go was not a thing then it shuts
This morning from my computer (windows 7) I see a lot of numbers flight by update of something... Finally he stayed still long enough to read this message
' application operation update 26509 26509 (\Registry\Mach...) . who took about 90 dry
then the screen changed to say prepare to set up windows (while I was getting a large piece of paper to write it down in my computer I went back to what is normal for my computer open) he says treatment auto - VGA - the screen is black for 2 seconds and my office is open and functional.
--------
Please lmk if I should post this separately if it is not part of the above problem
OK not to confuse things and maybe it's not bad but I will also attach additional information... Thank you for your patience.
Sometimes messages arrive on my screen and went so fast that I don't know what they said and that's what's happening all I saw were collected WAN miniport (ATW) #2. and something that affects the usuage of my computer... I went to the Device Manager and under "Network card" was a green line to see, I opened 2 inputs was the first
"Intel (R) 82578 DC Gigabite Network Connection" under properties it says that this device does not work correctly
the second entry "WAN Miniport (ATW) #2 * was a yellow triangle with a point of exclamation and under properties say this device cannot start (Code 10) .
I'll wait on this case its not important right now with my orogonal above problem
Thanks again for you time and patience... looking forward to your entry
Learning to 62 (aka granny)
Hello
1. have you successfully install the update?
2. are you able to connect to the desktop without any problem?
Was the message you saw before Windows starts, the system applying these updates. This is a normal procedure that Windows takes above all the critical updates are applied. If you were not able to start Windows, then we might have a problem with Windows update.
Regarding your second yellow exclamation on the wide area network WAN miniport, you need to update the driver for the network adapter.
The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues. You may need to update the chipset drivers and the network adapter.
I suggest you run the automated FIXIT from the link below and.
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104
I would say as update you the driver for network card and check.
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
-
S75-b7218 Windows 8.1 satellite cannot see the bluetooth headset
Satellite 8.1 Windows cannot see the Philips SHB5500 bluetooth headset.
Driver: Intel (r) wireless Bluetooth (r)
2014 08-12
Version: 17.1.14342Help! Please, I beg you!
Laptop certainly supports BT 4.0
The question is: have you enabled the BT correctly in 8.1 parameters to win?Another question: have you tested the BT headset as part of another device?
I mean, it is possible that the helmet is not working properly. -
My IDT audio works fine and its works my laptop well, but when I curls upward from my laptop to my TV via a HDMI cable, I output my laptop displays on my TV but no sound from my laptop on my TV came out. I think the problem is because there is something wrong with my high definition Audio Device. It has a yellow triangle next to him with a! in the middle of the yellow triangle in the Manager of devices under sound, video and game controllers. And when I click on properties on the high definition Audio Device, it says: "this device cannot start. (Code 10) {Operation failed} The requested operation failed. Any help would be great. Is CLEAN Windows 10 installed on a NEW HARD DISK. I HAVE NOT upgraded, windows 10 was clean installed from a disc.
See if it works...
Download and install this free utility for files. The 2nd listed file is 64-bit.
Then download and save, but do not run the graphics driver Intel W10 from the support page of your laptop.
This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.
File name: sp72370.exe
Right-click on the file of the Intel graphics driver you just downloaded and select 7 - zip from the list of options.
Have 7-zip extract of: and let it extract the file in the file name (sp72370).
Go to Device Manager and click on the audio device HD of the problem.
Click on the driver tab, click on set to update driver. Select her browse my computer for driver software option and navigate to the driver 7-zip created folder.
Make sure that the include subfolders is selected and see if the pilot goes like this.
Then restart the PC.
-
HP 8440p: Audio device high definition - device cannot start (Code 10)
I'm having a problem of isolation an indication in device with high definition Audio Device Manager. I have Intel Graphics with this machine. The OS is W10 Pro. I loaded the audio driver for Windows 7 64-bit, but that made no difference.
Device Manager indicates that "this device cannot start (Code 10)"
Driver date 09/07/2015 / Version - 10.0.10240.16384 / Microsoft driver
Details tab - value = device high definition Audio
Tab events - (information)
Device HDAUDIO\FUNC_01 & VEN_8086 & DEV_2804 & SUBSYS_80860101 & REV_1000\4 & 36c4990c & 0 & 0301 requires installation.
Any guidance is appreciated.
Hi @JS2045
The audio device problem HD, what you see is the Intel HDMI audio device that needs a driver.
I looked around for a driver W10 to the hardware ID you have published and fails.
This device is necessary unless you want or need audio via the port display.
The only suggestion I can offer would be to try the graphics driver Intel W7 laptop support and driver page, but install it... so that you target just the audio device problem...
Download, but do not work with this graphics driver...
Download and install this free utility for files. 64-bit is the second listed file.
After installing 7-zip, do a right-click on the graphic driver file you downloaded, and select 7 - zip in the list of items.
Have 7-Zip extract of: and let it extract the driver for the name of the folder (sp64360).
Go to Device Manager and click on the audio device problem Intel HD requiring the driver.
Click the driver tab. Click on set to update driver.
Select her browse my computer for driver software option and navigate to the driver 7-Zip created folder.
Make sure that the include subfolders is selected and see if the pilot goes like this.
Then restart.
If you explore the driver folder 7-zip created, and then open the DisplayAudio folder, you will find the setup information file that has the hardware ID you reported that supported by the driver.
If this driver audio works on W10, I don't know.
But if you want to give that a try, it would be a way to do it without messing with the real graphics driver.
-
How to convert the string with numbers in the table of Boolean 2D
Hello
I have input a string with comma separated numbers 1,192 (starting at 1).
This string must be converted to a table 2D-boolean. Each number that appears should be true, not true rest.
The 2D table consists of 4 times of 0.47 Boolean values.
1.48--> [0.47] numbers [0]
49.96--> [0.47] numbers [1]
Numbers 97.144--> [0.47] [2]
145.192--> [0.47] numbers [3]If a '1, 49, 97 145' input string put all [0] [0.3] true.
How can it be easy/fast resolved?
Thanks for help
Break the string of numbers in a table of numbers. (Spreasheet String to Array).
In a loop For, index with each issue of this table. Use in the range and Coerce to see if it is in the range of numbers. (You can put this in a loop For as auto good indexing through the ranges). If it's in the range, then use subset replace table to activate the corresponding item in a real. If this is not the case, do nothing. Maintain the table of Boolean in a shift register.
Repeat this step for each number in your table.
(What is a class assignment?)
-
Hello
I try to get the array of strings to numbers of the attachment. I need this table of values from the file.
Any help?
You cannot directly read a file saved in Excel format. You must save the spreadsheet in a tab delimited text file. And after that, there are a few minor changes that can be made to your VI to get what you want.
-
Lite-On iHAS124-04 IT burner - DVD "device cannot start Code 10".
Windows does not work with my DVD writer. This is the third I've tried and I get the same error message in Device Manager. "Device cannot start Code 10". It shows the correct driver and BIOS recognized correctly as a SATA drive.
Hello
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104/Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================================
After the foregoing:
References to Vista also apply to Windows 7.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The DVD player does not work after installing Windows 7
http://support.Microsoft.com/kb/975270/The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry settings for your
CD/DVD drive someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays
all devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
This device cannot start. (Code 10)
I accidentally deleted my sound driver and have more noise. the error message im receiving to the IDT codec high definition: this device cannot start. (Code 10)
Hello
1. what operating system is installed on your system?
2. did you of recent changes to the system before the show?
Method 1:
Follow the link below and follow the steps and check if it helps.
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
Also, check out the link below and see the description of the error code 10.
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104
Let us know if it helps.
-
IDT high definition audio CODEC. Error: the device cannot start (code 10)
Original title: IDT high definition audio CODEC
My Dell Latitude D620 has no sound control or (other than the system beep) volume, the volume control buttons do not work. When I uninstall and reinstall the IDT, I get an error message - "device cannot start (code 10).» Help!
Hello
1. have you done any change in software on the computer lately?
2. What is the brand and the model number of the sound card?Method 1.
Follow the procedure step by step in the article below and check.
No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-WindowsMethod 2.
If the problem persists, follow the steps listed in the article below and check.
How to troubleshoot sound problems in Windows XP
http://support.Microsoft.com/kb/307918
Note: You can visit the website of the manufacturer of the computer to get the latest drivers for Windows XP and install it.
I hope this helps.See also: related errors Description 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104I hope this helps.
Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Maybe you are looking for
-
El Cpaitan10.11.6 to Sierra 10.12 no-go
I have the iMac 24 inch 2008 w / OS X El Capital 10.11.6. my attempts on the app store to download macOS Sierra abend w / "macOS version 10.12 cannot be installed on this computer. by pressing the button "more"... nothing. What gives? everything
-
IVI driver does not appear in NIMAX
If I was having trouble with one of my devices and it seemed to have occurred after I have updated NIVISA and IVI compliance to the new version 15. I tried to get back to NIVISA 5.4 and PKI 4.6, which was when it was all working. I accedentially al
-
Microsoft SQL Server 2005 Express edition SP3 (KB955607) takes more time to install
Original title: Microsoft SQL Server 2005 Express edition SP3 install (KB955607) Hello I found that this installation updates automatic updates really time consuming (perhaps too long)... How long does take his will? Sometimes it's really bothering m
-
Codes error C 64 and 66; Cannot install Net Framework 4 updates
NET Framework 4.0 does not exist in my programs. Attempts to install it are filled with error code 643. At this point, I'm stumped.
-
NET Work Setting will not change
My network configuration is on the Public network and will not be reset to a home network. Windows 7 Pro. Made in the event of problem for the networks. It cannot identify the problem. I don't know if I've changed that or some malware changed andbloc