IVI driver does not appear in NIMAX
If I was having trouble with one of my devices and it seemed to have occurred after I have updated NIVISA and IVI compliance to the new version 15. I tried to get back to NIVISA 5.4 and PKI 4.6, which was when it was all working. I accedentially also uninstalled shared IVI 2.3 components. Once I had everything installed back (older versions) the NIMAX completely reset and none of my previously installed IVI devices appeared in the fall down to the software tab on the IVI driver session. I started to re - install them and this seemes to work as they began to re-appear in this drop-down list. All those who have installed a MSI file restored very well, but those who install with a setup.exe file are not. I tried to remove and then reinstalling them them and they still do not appear in the drop-down menu. I tried to fix the modules NIVISA and ICP and still nothing. Those I'm trying to install is all o-scopes. Tektronixs. The tkdpo3, series 3 and 5.
Any thoughts? I think that there is something in a file somewhere resets does not correctly.
I uninstalled and reinstalled everything and it works fine now.
Tags: NI Software
Similar Questions
-
Toshiba Stor.E Canvio HARD drive does not appear
Hello
I got a Toshiba Stor.E Canvio for about 2 years without problems
By using the external drive recently and the USB cable is removed accidentally. After attempting to connect the USB on my Mac again once the external HARD drive does not appear in the Finder.
Passing through the disk utility, the hard drive is visible, but I am unable to check or repair the disk.
The message I get is
"Peut-t disk utility repair this disk. "Save as many files as possible, reformat the drive and restore your backed up files.
The HARD drive itself is turned on, the light is on... but I'm stuck now
Any help would be appreciated
Gary
I m not iOS expert and, therefore, I cannot recommend to any advanced troubleshooting but recommend you check out this thread:
http://Apple.StackExchange.com/questions/130304 -
Satellite A350-CD/DVD drive does not appear
My CD drive does not appear in my computer and no longer works
Help, please!
Thank you
Hi denis,.
It appears perhaps with yellow exclamation point in Device Manager? With the code 19 error? I ask this question because I founded this interesting article in the Microsoft Knowledge Base:
http://support.Microsoft.com/kb/314060In addition, it would be interesting to know if the drive is seen in BIOS or not because in the worst case, need to replace the disk.
-
Satellite A100: CD/DVD drive does not appear in the Manager of peripherals and BIOS
The CD/DVD drive does not appear in the window manager and I can't incert CD
The BIOS displays "none" instead of "optical device".This means that the CD device is dead?
Hey Micky,
Unfortunately it's probably :-(. You can try to remove the optical drive and then reinsert it into Notepad, and then marketing and see if it is recognized as a new device.
Check also that it is not displayed in Device Manager and if it is remove before trying the above.
Kind regards
-
New hard drive does not appear in the disk utility
I am installing a new hard drive in my late 2011 13 "MacBook Pro. I started using apple's online retrieval system and went to disk utility. I tried to format the drive, but he is stuck saying "remove disc" for about a half hour, and then I had a rotation beach ball and could not move the cursor. I restarted the computer and now the drive does not appear in the disk utility. Any help is appreciated as I have no idea where to go from here.
Thank you.
You will may be turned off and check that your hard drive is correctly positioned with all the screws tight.
-
Usb detects the dvd player and my external hard drive, but does not detect my hard drive. I tried to disconnect the external hard drive, but still, it does not detect my hard drive. The drive letter is E: and pen usb H: external drive letter is F: HELP!
When I try to send files to it in "send to" my hard drive does not appear
What hard drive, external or internal? Normally only removable devices appear in the mailing list.
You could use copy and paste instead, or see the following article...
http://support.Microsoft.com/kb/310270
.. how .to add items to send it to the list.
Tricky
-
My DVD drive does not appear in Windows Explorer
This morning my computer ran a scan virus and other things, and when this was done, my computer will not respond to any type of CD. No DVD, CD or even disks with files stored on them.
When I open windows Explorer, the drive from DVD (e) is not even more appear. I was wondering how to fix this.Hello
Please make all below even if you have done some before as it is often the set of operations which solves
the question.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.Hope these helps.
Rob - bicycle - Mark Twain said it is good. -
Combo DVD/CD drive does not appear in Windows Explorer or the Device Manager
The combo DVD/CD on my laptop drive isn't in Device Manager or Windows Explorer. The door is not ejected. You must use a paperclip, poking into the hole to open it. I also re - it sitting, but it changed nothing. We had this laptop for 1.5 years and the disk worked great until yesterday when trying to install Starcraft II. Installation failed and it has messed up also the DVD/CD drive.
We read some other difficulty advice and tried the upper and lower filters in the registry, but there was no entires of upper and lower filters in the key.
The specifications of the laptop are:
HP Pavilion dv7
Processor Dual-Core Mobile RM-72 2.10 GHz AMD Turion X 2
4 GB OF RAM
64-bit Windows Vista
Hello
Check with HP Support, their online documentation and drivers, and their known forums
questions.Support HP & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Under my computer, Miss me my CD card. I hear the CD player to make the noise, but it will not be displayed on the screen. So I can't read CD that I saved the material on. My Dell is only 3 years old. Maybe bad CD player already? Can you help me? Thank you
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Drive external hard drive does not appear under "devices."
Hello
I just updated my OS to Sierra of MacOS. I have connected my external hard drive (HDD) and it does not appear under "Devices" in my Finder window. It worked fine before the update.
I use a MacBook Pro (end of 2013), currently running MacOS Sierra (Version 10.12). My external HARD drive is a SeaGate Slim SL Media (500 GB).
The external HARD disk appears in disk utility application. He also appears on the about this Mac > system report > USB. I don't know what the problem is, the external HARD disk is identified but does not appear for use in the Finder window.
I read that it could possibly be in mode 'sleep' and putting the MacBook to sleep (while it is plugged into the external HARD drive) and it to wake up again should solve the problem. However, it did not work. No more restarting my MacBook. It was mentioned in another post that it may require extra power, so I attached power adapter and again, without success.
I do not want to clear the contents of the external HARD drive.
Is there a way to get my external HARD drive works as expected with my MacBook?
Thank you much in advance.
I also have this problem.
My camera is Macbook Pro 13 "retina 2015 and Seagate Backup more 1 TB (NTFS - Paragon NTFS)
* Edit *.
My HDD show in report system > hardware > USB
but it does not show in Finder or Desktop.
-
Epson printer driver does not appear in the printer &; Scanner window
I downloaded the latest driver for my Epson Artisan 50 printer OS 10.11.5. I ran the installer, and it seems that the installation was successful. But when I am preferences system-> printers and Scanners and click the + to add the new printer, it does not appear in the list 'Add '. How ca I add the driver to my preferences printers and Scanners?
Mark Romine wrote:
How ca I add the driver to my preferences printers and Scanners?
You do not add a printer driver for printers and Scanners. You add the printer itself.
The Epson Artisan 50 is not a printer capable of AirPrint, as shown here:
(I have an Epson taking is an AirPrint printer, and it works very well with OS X 10.11.5.)
The Artisan 50 printer seems (but not scanner) software in the Apple driver:
Printer and scanner software available for download for your Mac - Apple Support
Therefore, follow the instructions here:
-
DVD drive does not appear on the screen of the reader 'computer '.
I lost access to the DVD drive. It does not appear on the screen of the reader 'computer '.
It starts with a disc inserted, but stops after about 20 seconds without opening all files.
The DVD comes on when it starts first and then turns off after a few seconds.
I have re-installed the driver of Toshiba and still no access.I think it all started when I installed a new WD 1 TB external hard drive which its virtual CD drive on the E: drive, which was used by the installation DVD player. I moved the external hard drive G: and drive E: letter has left vacant, but still does not work.
Any ideas how I can fix this problem? It would be greatly appreciated.
Optical disc drive is listed correctly in the Device Manager?
-
Toshiba Canvio Basics HARD drive does not appear in my computer
Hello
I have a HDTB110AK3BA - Toshiba 1 TB Canvio Plus Portable Hard Drive for storage 3.0 Basics and the computer will allow it to connect, but it does not appear in my computer / pc is in Device Manager thought but not my pc
Please help and Windows 7 or windows 8.1 PC do the same thing.
Hello
I found the description of the product of this external HARD disk:
Product features:
• USB 3.0 - powered portable add-on storage.
• Voltage of bus capable USB, no need for AC adapter.
• Easy to use with no software to install.
• Adapts to large digital files with spacious storage capacity.
• Protect your drive (internal shock sensor and ramp loading technology).Specifications
• Capacity: 1.0 TB
• Interface: USB 3.0
• Transfer rate: up to 5 Gb/s
• Speed: 5 400 rpm
• Average access time: 12ms
• Cache buffer: 8 MBIt is a HARD USB 3.0 drive. No doubt the HARD drive is not recognized correctly in windows exploerer due to the low power.
The USB 2.0 port common feeds only 500mA. The USB 3.0 device must be able to 900mA.
Therefore, it would be advisable to connect this 2 ports USB 2.0 HARD drive with a USB Y cable -
Drive external DRIVE does not appear in my computer
Windows says new hardware detected... your new hardware is installed, but it does not appear in my computer. No drive letter is assigned.
Can anyone help?
Do you use an external USB HDD? Does a job on another computer?
-
hard drive does not appear el capıtan
Hello. First of all, I must say that I am not good in English. But I'll try my best to explain what my problem is.
MacBook Pro OS X EL CAPITAN series: 10.11.2
I have a hard drive which called WD My passport 500 GB. When ı connect to my mac. I get my password to WD unlocker. Its does not appear on the desktop. It shows the utility disc, but as a transparent. Its gives no information on the hard disk, as applications 0 KB, photos etc, 0 KB.
I tried first aid button. It said first aid was fallen I tried to connect the Desktop button. He dıd not happen. It is just to stay there as a transparent. I closed and open my mac again. I wanted to be sure that my hard drive is broken or not. I tried with another computer which is windows. He worked there. My disc format is MS - DOT (FAT) but ı have same problem. Can you help me to fıx it. I have very important files. Thank you
Best account.
I'm not 100% sure, but I think the problem is that you have installed the WD (WD Unlocker) software. On a Mac, you should not install all software 'smart' to manage external dives.
Maybe you are looking for
-
He does not recognize cd or dvd burners, identifies the disk as a removable storage device
-
Video error stream TV to a Media Center extender (XBOX 360)
Hello I have a PC that I use to record TV, which is accessible by several XBOX 360 through Media center. This configuration was working perfectly until a few days ago. At the same time, all 3 Xbox has ceased to be able to view the recorded TV program
-
Trying to email from a computer I get "unable to send the message" an error number 3202
original title: error3202 When trying to send the USB to the computer, the error number 3202 just cannot send the message on behalf of 82 live.
-
Hi, I've alerted to creative cloud for windows. I bought a mac, so I would like to cancel the one for windows and Mac. "Subscriber." Any idea? I looked everywhere on adobe, but I can't find. Thanks a lot for your help!
-
Cloud creative pn 2 Pc + some applications on mobile devices
Creative cloud can be installed on 2 pc. But is it possible on 2 pc + some applications on mobile devices? If yes how many mobile devices?I installed it on 2 PC + some apps on 1 smartphone and TabletAnd I got the message that tells me to turn off all