WRT54G v3 - some devices connect more

Similar Questions

• Some devices not recognized by USB ports

  My USB ports seem to have problems with grateful some devices connected via a cable, while having no problem with reading others.

  For example my SteelSeries mouse and keyboard are connected via USB as well as the Xbox 360 controller, and they work fine. However, to connect my Nikon D60 or Lenovo A3500 Tablet gives me message "unrecognized USB device". The computer not being able to read the camera is particularly odd, because he had no problem reading Nikon D3500 of my mother. From the logical point of view, the question is meaningless to me, and Googling the problem no results and more often given solutions have failed.

  I wonder if there is a solution, I missed again.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (works on win 8 & win 10)

• wired devices is more capable of connecting to time capsule

  Wired devices connected to the time capsule apple are assigned is no longer an ip address and not able to connect to the internet. Always wireless devices connect very well without any problems.

  Gites assign addresses IP not work

  The capsule is connected via PPPoE modem of fibre broadband BT openreach

  Any ideas?

  Wireless devices get the private IP address of the TC... Please check.

  for example... the TC in standard configuration as a router will use 10.0.1.x for the first device is 10.0.1.2

  The values of the gateway and DNS will be 10.0.1.1 on the laptop... check and report what are the numbers.

  On the ethernet connected machine... see if you get anything... Otherwise, set an IP address static, for example 10.0.1.201 with gateway of 10.0.1.1 and the same DNS... Does it work... If this is not the case, change the Google public DNS. 8.8.8.8

  It might also help to post some screenshots of the configuration of the TC if you still have questions... tab tab and internet network more summary page.

• Could not connect more than 4 devices to time capsule

  Hello. I have the latest generation 3 TB Time Capsule. Since last week I can´t connect more than 4 devices to transport CANADA. Before that, I had 2 iPhones, iPad 1 air connection 2, an iMac, a macbook, the appleTV to generation 4 and a PS4. I tried a soft reset, a hard reset, a reset to factory settings, nothing works. Now I can´t connect the macbook and the PS4 more, even if all other devices are off. My iPhone 6s more is the only device that I can connect every time. I installed the last firmare update, but nothing has changed. I don.t know what else to do. Thanks in advance, Fabian

  When the Capsule is configured to act as a router, it will provide up to 50 connections for wireless devices and 150 for the wired devices. So, the first step in troubleshooting that I would say is to ensure that the time Capsule is set to act as the router for your network devices.

  To do this, use the following steps:

  • Open AirPort Utility on your main Mac computer (Finder > Applications > utilities > AirPort Utility)
  • Click on the image of the time Capsule
  • Click on edit in the window that appears
  • Click on the network at the top of the next window tab
  • Check the setting of the router mode know if it is configured as DHCP and NAT... or... If it is off (Bridge Mode).

  Please report it on the setting for the router Mode you see

• Why some devices (like the PS3) connects through the 5 Ghz band? (EA3500)

  Just installed a Linksys N750 (EA3500) router (WAN - LAN Configuration).

  I have set the two broadband networks: 2.4 Ghz and 5 GHz with different SSID and different WAP/WAP2 staff mixt.

  While some devices display correctly the two networks, I am facing problems with the 5 GHz band and wonder if it's the breath of some sort of failure:

  -My iPad offered the two signals and allow me to define the 5 Ghz band, but it is showing the weak signals and stall when loading Web pages; as soon as I put it instead on the 2.4 Ghz band, (standing at the same place, of course), what's up, excellent signal.

  -J' have a Mac Mini and the location of the PS3 side by side.  The Mac Mini seems to work perfectly in both bands, 2.4 or 5 - excellent signal. However, the PS3 has failed his test of connection and indicates that the signal is not noticeable on the 5 GHz. But connect as a wink on the 2.4 Ghz band.

  -Got on and off voltage signal of 5 GHz on a laptop; connected to 2.4 Ghz, everything works perfectly.

  -iPhone 4s: I can't even see the SSID of 5 GHz, but I get the 2.4 so Guess account...

  So I'm tempted to conclude that some devices can not just keep up (?) to connect on 5 GHz...  But... a PS3? ... Huumm... (but true: PS3 came out in 2006...)

  No logic to this?

  Thank you

  Rob

  There are devices just wireless which are not turned on or is not compatible to work with a network of Ghz band. The WiFi feature may not be up-to-date or limited to only work with a network of 2.4 Ghz. In your case, you might want to check with Sony so PS3 can be updated to work with a network of 5 GHz.

• EA6350 - strange problem with DNS on some devices.

  My EA6350 has this strange issue where some devices, not all, are struggling to get the DNS, and I have to go back and manually configure DNS servers (I am on Comcast, so I use Comcast servers) in each unit carried out in order to get an Internet connection. (i.e., I need to replace the 192.168.1.1 provided by DHCP from the router with 75.75.75.75/75.75.75.76).  Looks like its something to do with some of my devices do not love how DNS gets proxied through this address by the router.  I've seen him have a problem on a Win7 PC, a PC Win10, a chromebook, an Xbox 360 and a couple of smart TV, but it seems not to be a problem on iPhones, iPads, a phone Win10, Win10 tablet, an other PC Win7, and one an Xbox.

  I tried to do a factory reset and reset of the router and flush the DNS cache on the device that would allow me to do, but nothing helped. My firmware is updated.  I also tried to set the static routes of the DNS on the router and that doesn't seem to help either.

  The interesting part about this is that it hit all of the devices in my house, just a few and it seems to be more prevalent on cable devices.  From what I can tell, the router receives its DNS Comcast very well (and as I said, there are a lot of devices that work).   Has anyone else seen anything like this?

  I think I solved my problem.  I did a factory reset on the router and don't update the firmware and now everything seems to work for all devices, even the most problematic.

  2.1.1.168234 is good.

  What that either version is later that it has problems.

• Can I connect more than one headset bluetooth with Apple TV 4?

  Can I connect more than one headset bluetooth with Apple TV 4?

  No, sorry. This is a limitation for all devices Bluetooth headset.

• Qosmio G50-12 q - how to configure the devices connected to the USB mode standby

  Hello

  I wanted to use the PC sleep function.
  I also wanted to as devices that have been extinguished when in stand by.

  Once implemented this function the PC will regularly stand-by, but the device connected by usb are set on fire, any other master type, a device a usb wi.fi, etc.

  Someone told me that maybe some functions in the Bios only are not put in place to do that once entered the booth by the PC off all devices those connected.

  What checks and I have to perform in the configuration PC bios?

  How we in the bios? By pressing the keys on which?

  Thank you

  * valkyrie @ *.

  Please post comments if workaround posted by Akuma helped!

  It would be really appreciated.

• Device USB not recognized - device connected USB has malfunctioned and Windows does not recognize it

  I have a HP Pavilion dv4 laptop running Windows 7 Home Edition Premium and the USB ports worked well for a HP deskjet printer and an older Casio digital camera. Then one day, the laptop decided not to recognize the Casio digital camera and gave the error message "USB device not recognized" and also indicated that the device connected to the computer has malfunctioned. This prompted me to buy a new digital camera Canon. Well, a new camera has not fixed the problem. Now, anything that is connected to one of the 2 ports USB will not be recognized by my laptop. Help!  I am at a loss to understand this.  I tried using Microsoft suggested below:

  Suggestion 1: the problem with USB devices, uninstall and reinstall all USB controllers. This allows controllers to recover the port USB of his condition does not respond.
  USB controllers represent the USB ports in Device Manager.

  a. Click Start, type Manager of devices in the search box of start and press ENTER.
  b. expand Bus USB controllers.
  Note: you may scroll through the list to find this point.
  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.
  d. Repeat steps above for each controller USB is listed under Bus USB controllers.
  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.
  f. check the USB device to see if it works.

  This has not fixed the problem.  Then the Device Manager, I tried to update the drivers on all the USB controllers and root hubs. While some may have received software updates downloaded, it still has not corrected the problem of unrecognized USB device after the computer is restarted.  I hope that someone knows the solution to this situation and can pass it on to me. Thanks for reading and any help display.

  Read previous messages revealed the solution for USB devices not recognized on my HP Pavilion as well as several other laptop models.  Shut down the computer and remove the battery and wait for about 15 minutes. Reinstall the battery and restart the computer.  USB ports are working to download pictures from my digital camera from Canon and charging a cell phone, etc...   I hope it helps others with this problem!

• Red printers device, connect como.

  connect device of more of the Red dá como y cuando todo apago y reinicio vuelta todo Patrick o el red device not walk, no hace a year the compre y el device of Red y still no lo puedo usar.

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

  Please, select su idioma in her lista desplegable anterior to send you in el idioma of choice su pregunta. El foro Québec ha published're para frances only. If usted no encuentra el idioma no desee por encima of las options para support otros destinos international themselves can find following el enlace

  Gracias

• We are trying to install FSRM (File Server Resource Manager) in windows server 2 k 3 R2 SP2. After installation, its error message that gives as no network device connected. Suggest me!

  Original title: problem in installing FSRM

  We are trying to install FSRM (File Server Resource Manager) in windows server 2 k 3 R2 SP2. After installation, open the FSRM in "All programs", its error message that gives as no network device connected.  Suggest me!

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Connection more hard shores and CD disks results in failure of Windows startup

  Original title: connection more hard shores and CD players.

  Hello
  my computer using the IDE master and one slave SATA hard drives. the problem is when I try to connect a third hard drive to the system. It takes a while to show the start screen "Intel" and he then fails to start windows. It also does the same thing when I tried to connect a second DVD in there. Shoul I change something in the BIOS settings?
  What could be the problem?

  Hello

  What is the type of the third hard drive, it's /IDE (Integrated device electonics) SATA (Serial Attachment of asynchronous transfer)?

  Any additional hard drive included mette as disk HARD slave and make sure of DVD drive jumpers are fixed for the slave. Check the BIOS (Basic Input Output System) and drive HARD primary set as first boot device.

  You must contact the manufacturer of the computer to perform tasks in the BIOS.

  Warning: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly. BIOS update should be made only if necessary (to solve a compatibility problem, for example). It can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.

  Reference link provided below for more information:

  BIOS: Frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  Hope this information helps.

• Problem connecting more of 20 computers under Windows 7 64-bit

  I just build a PC, Windows 7 Pro 64 bit and shared hard drive of about 25 computers he uses as a render farm.

  problem occurs when I try to connect more than 20 computers and as an error shows that it has reached its connection limit. Tried to change advance sharing users 20 to 30 but can not. Is there a way to get around this or is that windows 7 can not be supported more than 20 computers on a network?

  Thank you...

  I just build a PC, Windows 7 Pro 64 bit and shared hard drive of about 25 computers he uses as a render farm.

  problem occurs when I try to connect more than 20 computers and as an error shows that it has reached its connection limit. Tried to change advance sharing users 20 to 30 but can not. Is there a way to get around this or is that windows 7 can not be supported more than 20 computers on a network?

  Thank you...

  Windows 7 has a limit of 20 computers as described in the agreement (EULA).

  " Device connections. . "You can allow up to 20 other devices to access the software on the licensed computer to use file Services, Print Services, Internet Information Services and Internet and Telephony Services connection sharing only.

  http://www.microsoftstore.com/store/msusa/en_US/DisplayHelpEULAPage

• USB devices connected through a USB 2.0 Hub Stop Responding and are not recognized after Hub reconnects

  Recently, I have this strange problem where if I connect an additional USB device to one of my USB hubs, some of my devices stop working (especially my keyboard and mouse).

  I have two hubs Generic USB connected to my motherboard. My motherboard is an ASUS Rampage II Extreme X 58 who and chips ICH10. It has 4 USB ports in the front and 6 ports on the rear panel (all USB 2.0). I also have a USB 3 controller card that is connected to one of the PCI-E card to the Board of Directors.  I have the following problems:

  1. Connect a USB device to one of my USB hubs (or one of the USB ports on the front panel) causes some of my devices to stop working (especially my keyboard and mouse that are connected via a USB hub). It seems that crashes of USB controller.  If disconnect and reconnect my HUB, windows does not recognize devices connected to this hub.
  2. Now, after the crash, if unplugging the devices connected to the hub and connect it directly to one of the ports on the front or the back of the computer, Windows instantly recognizes!

  Now I'm confused what is the cause of this problem. I had the same computer since the release of the i7 and X 58 and never had this problem (although I don't remember if I used USB hubs right there).

  Why Windows to recognise the devices connected to the hub at the beginning, but not after the crash?

  Why USB devices stop working when I connect to another USB device on my computer?

  And how do I solve this problem?

  AK

  Just a thought by the way.  If the hubs are not powered you can cause the + 5V due to the excessive number of devices not powered up to a point where it causes accidents and able to resume.

  Reduce the number of UN powered can solve this problem,

• Windows has encountered a problem communicating with a device connected to your computer.

  When you start the computer laptop, windows Boot Manager appears.

  He reads

  Windows has encountered a problem communicating with a device connected to your computer.

  file: \Boot\BCD

  status: 0xc00000e9

  Info: an unexpected i/o error has occurred.

  When I I go through F8, safe mode, last known good configuration, running in debug ect mode.

  running in safe mode past with him, freezes for abit in the past to a black screen with just the cursor and the Center recovery running VAIO, last good configuration, known debug mode. This windows is loading files, then the windows boot screen were it freezes then goes to a black screen with just a cursor.

  Place the cursor, I am unable to do anything else on this screen.

  is it far from getting the laptop to function normally again or is it finally the end of his life?

  the laptop is a sony VAIO E series (VPCEA25FG) running under windows 7.

  Hello

  The error - an unexpected i/o error has occurred, status: (0Xc00000e9) is a material error in the BIOS of your computer.

  Basically, it's to tell you that the computer is not able to communicate effectively with the hard drive.

  Try the Startup Repair.  Startup Repair is designed to prevent a reinstall tedious to diagnose and repair problems that prevent Windows startup.

  To run the Startup Repair tool, see the links below for more details:

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  
  

  Startup Repair: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  I also suggest you to update the BIOS. Update the BIOS, contact the manufacturer of the system!

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  To ask your question in the Forum of Sony, refer to this link.

  http://community.Sony.com/?XID=M:header:eSupport