WRT54GS - Internet cannot be found.

I have a wireless desktop computer and I keep getting the message: "connected to access point but internet cannot be found»

Internet is Comcast. The router and the PC are about 25 feet apart on different floors of my house.

It worked. It took about 2 minutes to get a network address, but it finally did. The signal strength is low, but the speed is 11 Mbps. I'll pass Office to see if I can get a signal stronger. Thank you

Tags: Linksys Routers

Similar Questions

  • Error message: "internet is not found.

    I have correctly installed and configured a WRT54G2 wireless router on my main PC under Windows Vista.  I also successfully installed and configured an adapter WUSB54GC on a second older Windows PC / ME with 256 MB of memory.

    With the help of Technical Support Linksys, I sync was my router with the adapter.  I get the message: "you are connected to the access point, but the internet cannot be found.  The second PC continues to cycle trying to access the internet, without success.

    I would appreciate any suggestion about solving this last step to the internet.  So close, yet so far.  Thanks in advance for any help or ideas...

    Try to give static ip addressto pc within the range of the router, if still does not upgrade the firmware of the router.

  • Cannot connect to internet after start - found that the firewall is not enabled

    Original title: when the pc is turned on, unable to connect to the internet, found the firewall is not turned on. After repeated clicks, it finally works

    When the pc is turned on, I can not connect to the internet. I found that the firewall is not enabled. went to the control panel and clicked on the firewall and got the message that he could not appear, also could not click the security icon. After having repeated clicks and play with him, he finally turns on and I can use the pc normally. also now when I go into the control panel I just get a list up and down things on the control panel. used to occupy the entire screen from left to right. in color, maybe these two things are related, I do not know

    When the pc is turned on, I can not connect to the internet. I found that the firewall is not enabled. went to the control panel and clicked on the firewall and got the message that he could not appear, also could not click the security icon. After having repeated clicks and play with him, he finally turns on and I can use the pc normally. also now when I go into the control panel I just get a list up and down things on the control panel. used to occupy the entire screen from left to right. in color, maybe these two things are related, I do not know

    It's just a detailed view...

    I suggest some standard maintenance and cleaning which will generally help as you allow to get acquainted with your machine so that you can restrict the possibilities...

    Search for malware:

    Download, install, execute, update and perform analyses complete system with the two following applications:

    Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

    Search online with eSet Online Scanner.

    The less you have to run all the time, most things you want to run will perform:

    Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

    You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

    Do a house cleaning and the dust of this hard drive:

    You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

    Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

    If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
    http://www3.TELUS.NET/dandemar/spack.htm
    (Especially of interest here - #4)
    (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

    You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

    How to use disk cleanup
    http://support.Microsoft.com/kb/310312

    You can disable hibernation if it is enabled and you do not...

    When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

    -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
    -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
    -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

    You can control the amount of space your system restore can use...

    1. Click Start, right click my computer and then click Properties.
    2. click on the System Restore tab.
    3. highlight one of your readers (or C: If you only) and click on the button "settings".
    4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
    5. click on OK. Then click OK again.

    You can control the amount of space used may or may not temporary Internet files...

    Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

    -Open a copy of Microsoft Internet Explorer.
    -Select TOOLS - Internet Options.
    -On the general tab in the section 'Temporary Internet files', follow these steps:
    -Click on 'Delete the Cookies' (click OK)
    -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
    -Click OK.
    -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
    -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

    You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

    CCleaner (free!)
    http://www.CCleaner.com/
    (just disk cleanup - do not play with the part of the registry for the moment)

    Other ways to free up space...

    SequoiaView
    http://www.win.Tue.nl/SequoiaView/

    JDiskReport
    http://www.jgoodies.com/freeware/JDiskReport/index.html

    Those who can help you discover visually where all space is used.  Then, you can determine what to do.

    After that - you want to check any physical errors and fix everything for efficient access"

    CHKDSK
    How to scan your disks for errors* will take time and a reboot.

    Defragment
    How to defragment your hard drives* will take time

    Cleaning the components of update on your Windows XP computer

    While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

    Download and run the MSRT tool manually:
    http://www.Microsoft.com/security/malwareremove/default.mspx
    (Ignore the details and download the tool to download and save to your desktop, run it.)

    Reset.

    Download/install the latest program Windows installation (for your operating system):
    (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
    (Download and save it to your desktop, run it.)

    Reset.

    and...

    Download the latest version of Windows Update (x 86) agent here:
    http://go.Microsoft.com/fwlink/?LinkId=91237
    ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

    Close all Internet Explorer Windows and other applications.

    AutoScan--> RUN and type:
    %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
    --> Click OK.

    (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

    Reset.

    Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
    How to reset the Windows Update components?

    Reset.

    Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

    Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

    If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

  • time capsule airport cannot be opened because the original item cannot be found

    I just purchased a Time capsule airport and can't install. It flashes orange, and although that Time Machine backs up on it, and I can access the internet, I don't remember upward the back-up because I got the following error message:

    "'Airport Time Capsule' could not open the original item cannot be found".

    The printer is connected to the Capsule by USB works.

    I'm installing via an iMac.

    Help, please!

    Thank you

    You first need to determine what is at stake that indicates the LED "blinking orange.

    To make your iMac:

    • Run the AirPort Utility.
    • Select the Time Capsule
    • In the pop-up window, all questions will appear in the status section.

    Please post back your findings.

  • When I try to open my email on my new desktop, an error window tells me my host server POP3 cannot be found.

    My laptop receives by e-mail very well. Windows confiures my wireless network settings. Problem: when I try to open my email on my new desktop PC , an error window tells me my host server POP3 cannot be found. I have tried everything; network connections, Internet options; etc. I get connection otherwise for the internet Google, Facebook, online banking, but not to my email. I entered my full POP and SMTP addresses, but they are lost for my internet connection LAN, which is automatically set to be managed by Intel. I tried to reconfigure it and tried to find Windows wireless network settings. On my laptop if I lose the connection he asks me if I want Windows to manage my connection. And it does!  Help! I really want to be able to find the network Windows wireless.

    original title: NETWORK WITHOUT WIRE WINDOWS

    Hello

    If you use the internet OK for other things, the problem with Outlook Express (e-mail client).

    Check your server settings and out against your ISP help pages. I've seen cox help pages that involve your incoming server should be pop.east.cox.net (note the absence of the number 3 after pop). The outgoing server may be smtp.cox.net or maybe smtp.east.cox.net.

    Tricky

  • email problem - "mail from the host cannot be found.

    Problem title: original email.

    Why I have problems with my email migration to Windows Mail? I get an error message stating my "mail from the host cannot be found. This has happened on and off for the last 2 weeks. It also affects my laptop. He does not seem to fix his car, then back again. Have you any idea what may be causing this.

    The host (server) mail.btinternet.com is alive and well. It must have been a temporary problem. Let us know if this problem persists.
     
    Gary van, Microsoft MVP (Mail)
    ------------------------------------------------------
     
    "Gerry Pike" wrote in the new message: * e-mail address is removed from the privacy... *
     
    My e-mails light up Windows Internet Explorer. When I open Windows Mail, automatically migrate through and be able to be opened, read and responded to. I did this since I've been using Vista - about 2 years and more. It is strange that he should start suddenly that past not only with my PC, but also my laptop. I did not any changes to settings to one of my computers. The situation does not erase, but he continues to reappear - as the last 2 days! Even my ISP - BT - could not find a solution! The message I get is a follows.
     
    The host 'mail.btinternet.com' is not found. Please check that you have entered the server name correctly.
    Account: 'mail.btinternet.com', server: 'mail.btinternet.com', Protocol: POP3, Port: 110, secure (SSL): no, Socket error: 11001, error number: 0x800CCC0Dppear.
     

    Gary van, Microsoft MVP (Mail)

  • SSL VPN Tunnel mode, "page cannot be found" - Urgent!

    Hi experts,

    I am trying to configure a tunnel mode SSL VPN (the one who downloads the client to your PC to give full access to the network) and the urgent need of your help, sorry for the emergency, but my client needs this as soon as possible and my wife due our second baby from last Monday so time is of the essence

    I get an invalid certificate Internet explore when I navigate to http://publicip/remote, which is very well that it is a self cert signed, but when I click on 'continue' I get an error "page cannot be found".

    Did I miss something in the config or if I'm away from Flash (web files) files?

    I have attached the config but also a worm and dir flash sh.

    I ran the SDM to configure and as such he has inserted an ACL of the IP allowed the host publicip, I don't like this good and want to remove it, can advise you?

    Thank you very much

    Dave

    Hello

    Try to change this command in your context:

    Gateway gateway_1 domain domain.com

    TO

    Gateway gateway_1

    'domain' indicated that here is not real estate, but a part after the URL.  With the configuration you have, you will need to connect to the following url for a Web page:

    https://publicip/domain.com

    Which is probably why you get an error when you simply browse to https://publicip

    -Jason

  • DNS server cannot be found

    Whenever I try to use my WiFi at home one I get an error code saying that my DNS server cannot be found. And I basically all done to try to get him to stop. He also says that I have limited to WiFi connection. I am so sick of this and I need to be able to use my laptop for school.

    Hello

    1 have. what troubleshooting measures you tried?
    2 are you getting this error message when you try cable?

    Method 1.
    1 connect to your router (by typing 192.168.0.1 or 192.168.1.1 in the address bar) and connect. Check your user manual or documentation if you don't know the references of logon.
    2. make sure that you are in Setup-> basic configuration category.
    3. scroll down until you see "DHCP Server" - if it is disabled, select 'enable '.
    4 enable DHCP if you want, you can change the number that starts the DHCP IP setting. (This is optional)
    5. use the DNS servers provided by your ISP. There are many DNS servers out there. It is preferable to use your ISP if possible.
    6. scroll and click 'Save Settings'.

    Method 2.
    1. press Windows + R and type Control Panel in the Run dialog box.
    2. go to network and sharing Center and then click on change adapter settings.
    3. right click on the connection to the Local network and select Properties.
    4. Select Internet Protocol Version 6, and then click Properties.
    5. select Obtain DNS server automatically an address and press Ok.
    6. choose obtain an IP address automatically.
    7. repeat the steps for Internet Protocol version 4 as well.

    Also check out the link:

    Wireless and wired network problems
     
    I hope this helps. If you have any other queries/issues related to windows, write us and we will be happy to help you further.

  • When I try to print a web page it says selected printer cannot be found? Never had any problems until I loaded Windows 10 down. I even updated to fIREFOX.

    When I try to print a web page, it comes up with the message selected printer cannot be found.
    It was ok until I downloaded Windows 10.
    I updated Firefox to the latest edition, but still the same message appears.

    Any ideas?

    Hello, please try refreshing firefox and see if that can solve the problem...

  • Why Firefox takes me to a page that says: "Oops Page cannot be found" when I click on a link in a secure site. Not with IE: only Firefox.

    If I go to a secure site and click on a link, it take me to "Oops Page cannot be found". I have reset Firefox, uninstalled and re installed, disabled my Add Ons and any other suggestions for the forum. Nothing works and that this does not happen with IE. Is the bottom line that I have to use IE for these sites? I prefer Firefox but can not solve this problem.

    You found, buddy. It was my AVG Security Toolbar. My computer will be vulnerable to the virus if it is disabled?

    Once again, thank you very much for your time.

    KUDOS to THE MODERATOR that solved the problem.

  • Songs cannot be found

    Install new computers.  ITunes downloaded with success and filled library, but many songs not play and receive the message 'song cannot be found' I can locate individually, but then I have to delete the original.  Y at - it an easier way to do it.

    The "missing file" error occurs if the file is no longer where iTunes is expected to find. Causes possible is that you or a third-party tool has moved, renamed or deleted the file, one of its parents, or the reader, records it feeds has been a change in the letter of the drive or you have moved a non-portable library to a different path (see make a split cell library for more details). It is also possible that iTunes has changed from waiting for the files in the presentation of pre-iTunes 9 post-iTunes 9 layout, or vice versa, and so looking for a bit in the wrong place.

    Select a track with an exclamation point, use Ctrl - I to get the information, and then click No when asked to try to locate the track. Look under the file tab for the location that iTunes thinks that the file should be. Now look around your hard drive. I hope you can locate the track in question. If a part of your library has just been moved, renamed a folder or a drive letter has changed, it should be possible to reverse actions. If the difference between the two railroads is an additional music directory in a path, then it is a problem of layout. I can explain more if this is the case. If everything is where it is supposed to be trying to fix the security permissions for iTunes for Windows.

    In some cases, iTunes may be able to repair itself if you go through the same steps with Get Info, but this time, click on search and browse the lost track. He peut then offers to try to automatically correct the other broken links. Although he said something like 'use the same location' I think he expects to find titles in the same provision, artist / album, they were previously, with a systematic change to the path.

    If another application like Windows Media Player has moved/renamed files, or the library was moved from OS X to Windows, then chances are that subtle differences in naming strategies it will be difficult to restore the media to the precise path that iTunes is pregnant. In this case, as long as the missing files somewhere, you should be able to use my FindTracks script for reconnecting to iTunes. See this post for an explanation of how it works.

    If you want me to try to provide specific advice, please post back the following details:

    1. The location of the media file under Edit > Preferences > advanced
    2. The location of a sample of missing follow indicated under Get Info > file > location which begins file://localhost/
    3. The real path to the file which you gave 2 details.

    TT2

  • Cannot open 'Documents' because the original item cannot be found.

    By clicking on the sidebar in the finder, received the error of the object:

    Cannot open 'Documents' because the original item cannot be found.

    I spend a lot of stuff around recently because of a SIN that went down.  A lot of backups, transfers etc.

    Just as moving things to normal.

    Have all my backup files.

    If I go to users / #username "/ Documents I get the following:"

    Cannot open the 'Documents' folder because you don't have permission to view its contents.

    cmd - I do not show Panel permissions at all, just said I have unknown access.

    Finally, the fold icon has a small blue arrow in a white circle in the lower right corner.

    I am the only user and admin.

    Do you use a data service on the clouds that fits in the Finder, like "Dropbox" or "Google Reader?"

  • ITL file cannot be found or created

    When I try to open iTunes I get error, "itl cannot be found or the folder created.  I tried uninstalling iTunes and reinstalling, but it still doesn't work.  Is there any solution for this?

    Hi, Dwether.

    Please visit Apple support communities.

    I understand that you receive an error when you try to open iTunes.  While the article below is not labeled for your specific question, I recommend you have completed these steps still apply.

    If you do not see your content once you update iTunes

    See you soon

  • problem loading page (404 error) it says that the page cannot be found when I try to access the game gangsters through my mysapce account and I can not access is no longer with firefox and I want to know why I can't, guys please can you get?

    I can't access my account of gangsters through myspace. «whenever I try to open it I get "problem loading page" "404 error" "this page cannot be found" and it won't let me access it.» MySpace works fine, but as soon as I click on the application of gangsters I get the 404 error, this page could not be found, problem loading page! can you please help?

    This has happened

    Each time Firefox opened

    == I am trying to access game of gangsters through myspace

    The problem can be solved by opening FF and choose the tools... To Add one... Select the SEARCH addon, then choose UNINSTALL FF browser... When asked to restart, then reload the gangsters. It worked for me. The suggestion on the 404 that says to remove the search via Add/Remove programs is completely BS, that research does not appear there.

  • iTunes can't locate my music. When I try to play a song one get an exclamation point and the message "the song could not be used because the original file cannot be found. You want to locate?

    I don't know if I am posting this in the right place. If she must be somewhere else please let me know.

    When I try to play a song I get an exclamation point next to the song and a pop up that says: "the song could not be used because the original file cannot be found. You want to locate? »

    I use Windows 10 and iTunes version 12.3.1.

    It's the path statement where the music is currently located on my hard drive:

    If I click on a single song from within File Explorer, it opens iTunes and the song plays without problem.

    To try to solve this problem, I went in 'Advanced' in 'Préférences' and changed the iTunes media folder location to match the location of the files on my disk hard as you can see below.

    Unfortunately, it did not work either. iTunes is always gives me the same message that it cannot locate the original files. I REALLY hope someone can help me finally tried for weeks to solve this problem.

    Thank you!

    Now iCloud is down, if something happens on the end of apples.

Maybe you are looking for