WRT54GS /Windows7

Similar Questions

• WRT54G windows 7 without Internet

  Firmware v1.1 4.21.1

  Hello

  General information... as a short but detailed as possible

  I have the wired connections that follows:

  Desktop PC (Windows7)

  Bedroom PC (XP)

  Printer

  PS3

  wireless connections:

  Room 2 PC (XP)

  Laptop (XP)

  I had all this running smoothly across the router from W7 is released and installed on the desktop computer.

  Yesterday, our internet lost space through our cable provider. Came back on today, but here's where the problems start.

  I confirmed service service providers is back upward by connecting the modem directly to the desktop. Everything is ok.

  I then tried to connect through the router WRT54G, but W7 tells me that I have no internet access. I can connect to 192.168.1.1 OK, but on the status page, it shows me the following:

  IP address: 0.0.0.0

  Subnet mask: 0.0.0.0

  Default gateway: 0.0.0.0

  None of the list of the DNS 1, 2 or 3.

  Troubleshooting network in W7 I said the "DNS server not responding".

  Trying to do a ping test 192.168.1.1 in the Administration tab says "network is unreachable".

  The local DHCP Active IP network Table / status shows my DT 192.168.1.100 but agin not able Ping this address, again "network is unreachable".

  I tried options DHCP Release and rescued, but nothing changes.

  My next step was to reflash the firmware and power cycle the router but still no change.

  This is so, I can't access the internet through the router (only directly from the modem to the PC) so I get a lot of grief for children who want to play the PS3, but more important still, I can't online from my workstation in the bedroom. I would be surprised if the router is dead despite his age, because I can access the page to admin without problem.

  Any ideas on what I can do to get everything working again.

  THX

  Update

  Two power cycles later and all work again. Don't know why, but hayho.

• Security WRT54G problems

  I see a lot of posts here that address of wireless security, but I have a few questions that I can't find answers to. I apologize if I missed something.

  I'm running a wrt54g ver.2. I don't think that the firmware has already been upgraded (how do you know for sure?). Two PC will access the internet through the router, either wireless or wired connection at different points in time.  A PC running XP, the other runs Windows7. There will eventually be a laptop running Windows7.

  QUESTIONS

  1. I changed the router access password. The first time I connected wireless, I had to provide the password. Since then, I have not been invited for the password when connecting. I don't know that I deliberately did something to cause the router to allow this specific computer to connect without providing a password again: I may very well have done something I don't remember not or that I have not to the achieve of time was to "Save" the password. Is there a way to verify that other computers, which have not already provided the password, it will prohibit to connect? Like, is there a place I can display using 192.168.1.1 which will definitively confirm course status?
  2. Is the password to connect the same as the password for the management of the router put in place through 192.168.1.1? The reason I am wondering is that I am still able to get to 192.168.1.1 with the admin password. I have not tried using admin from a computer that is already connected to the internet via the router. -What makes the difference?
  3. In the same sense that question #2, https in 192.168.1.1 option affect only computers that are not connected to the internet through the router? I haven't specified the https option. My concern is that once I have specify the https option, I won't be able to get to 192.168.1.1, because my computer is not a valid certificate.
  4. Y at - it a display by 192.168.1.1 which will show you which computers are connected?
  5. The firmware update will bring extra security?

  TIA,

  Phil

  <3. this="" ones="" a="" good="">lu>

  Yes. This is one I had read entirely and returned through more than once. I was pretty well convinced of the position of the expert called (9000 + posts was?), until I read this:

  <10 locks="" are="" more="" secure="" than="" 2.="" why="" don't="" you="" use="" 10?="">

  I'm always a bit wary when someone tries to make a point with this kind of rhetoric, instead of the straighforward more ' well 10 locks may be safer than the 2, I'd use more than 2 because...» ». This is the part 'because' who is absent. So I left not being not sure what position is more convincing.

  4. maybe you can try Network Magic.

  OK, I just downloaded the free trial version. I'll reportbravohelen:

  Thanks for your help, p4p.

  Phil

• DNS server for the WRT54GS v6 problem

  This router running for 2 years without any problem (even on Windows7 since las year), recently it wont let me conect to the internet, network and say sharing that the configuration of the computer center are good but no response from the DNS server is present.

  (Windows 7 RTM Ultimate x 86, Bellsouth / AT & T ISP in Florida.) Conexion ADSL, nine cables ethernet and material held in the best conditions, the network card: Realtek RTL8102E/RTL8103 Family PCI - E Fast Ethernet NIC (NDIS 6.20) (v7.2)

  ================================================================================

  What I tried:

  Reset the router or modem (connected to a Westell 6100), in order to define the default settings and (based on the Web reset and reset buttons)

  Flushing IP in CMD

  Make the web based configuration for my WRT54GS v6, releasing DCHP, renewing, defaults, etc...

  Upgrade the firmware to v1.52.7 (latest) nothing helps, dating back to 1.52.6 original.

  Shows Device Manager hardware works correctly.

  Windows 7 show me a link to view the properties of my WRT54GS when I right click on it, I also see the "Enable" option, but every time I use it I get "Connection Failed!"

  ===========================================================================================

  I'm not much of a tech guy, and read the forum does not help me a lot, so I ask for help please.

  PS: CD installed by default for her with her old EasyLink Advisor without success, tried also the last 2 Lela EasyLink Advisor, nothing helps.

  In addition, there is no default gateway glancing an IPCONFIG in CMD and now there is (192.168.1.1), which I use to enter its web-based configuration.

  That your ISP is a DSL provider, most of the DSL Modem has a DHCP server on them, so they act as a router. From now you the type of connection is NAT behind NAT.

  Order for your Linksys router to work with a DSL Modem. Connect to the Linksys router and on the Configuration tab configuration page, you must modify the "local IP address" to 192.168.2.1 and click on save settings...

  Once the settings are saved, unplug the power to the router and Modem, wait 30 seconds and then plug in the power to the Modem, and once all the lights are cover then you can connect the power supply to the router and check if you are online.

• I like to keep an eye open when I go offline. Windows7

  [Firefox for Windows7]
  I "refreshed" Firefox settings by default and has not helped.

  What do you mean by "disconnect"?

  Is it through "file > work offline" or do you mean that you close Firefox and you want to reopen the tabs the next time?

  You can check the startup parameter:

  • Tools > Options > general > startup: "startup of Firefox:
    "Show my windows and tabs from last time '.
    "Show my home page".
    'Display a blank page '.

• will be firfox 15.0 downloaded b inwindows7 32 bit running windows7 64-bit?

  I downloaded firefox 15.0 b setup.exe using windows7 ultimate 32 bit operating system. Firefox software asked me by the my friend if I giving my friend that is using windows7 ultimate 64 bit.will it works in his laptop?

  Yes Firefox 32 bit works perfectly on Win7 64-bit operating system.

• Using the profile of windows7 on Ubuntu12.04

  I try to use my firefox on Windows7 in Ubuntu12.04 profile (installed with Wubi). I created a new profile and pointed at the correct profile folder, but I get the message:

  Firefox is unable to use the profile because it is in use.

  I tried to change only files containing passwords and cookies. No change. the old profile in Ubuntu works very well. Also checked the profiles.ini. Also tried it on Ubuntu in VirtualBox.

  Thank you.

  It is preferable not to use the same profile with different operating systems, because the paths of files that are used in some files are not compatible.
  
  Also, Ubuntu might not able to lock the profile correctly (Windows and Linux use a different method and files).
  
  The current versions of Firefox is no longer delete the lock file to make it possible detect start failures by looking at the timestamp.

  You can try using the links hard or soft links to specific files (sqlite databases and a few other folders).

  See these pages for a description of the files.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile

• More 1740bytes cannot retrieve cache Firefox12 in Windows7.The files files files can store the maximum size of a single file only 1740bytes?

  I can't get flv (YouTube video) larger files that 1740bytes of Firefox12 in Windows7 cache files, cause whenever I have search in the files, I can only find files with unique maximum file size 1740bytes and video files flv from YouTube are significantly larger than that. So, how can I get it back only the cache YouTube video file?
  But Firefox12 does not have this problem occurs in Windows XP.
  Furthermore, what is the maximum single file size in Firefox12 cache files?

  It has just begun to surface on the Web more. This seems not to be a browser problem, as happens in my opera and IE too. Apparently, YouTube has decided to not let us perceive his videos more and their place is cutting in 1 740 ko somehow files be reconstructed with its own codes when needed to play. Others are also noticed that if you make a pause a video is not going to preload as it used to- but a short distance. No doubt it is pre-configured as a segment of 1 740 both and support even not all except if you look at all this.

• Where can I find my favorites in my library of Windows7?

  I use Windows7.
  I can find my favorites (bookmarks) using my explore like this: computer/c:/user/name/favorites.

  When I use Firefox I also bookmark. How can I find it in my computer?

  I want to make a copy of my favorites and paste the copy to another computer in this way.

  See also:

  • http://KB.mozillazine.org/Export_bookmarks
  • http://KB.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: opens showing the file

• G6-2032tx: I LOST MY CD of DRIVERS AND WINDOWS7

  Hello! I lost the windows7 64 bit OS and the cd of drivers of my g6 g6-2032tx Pavilion. I have reformat with windows7 32 bit OS but when I look for the drivers in this site, the 32 bit OS is not drivers. Please send me copy of windows7 64 bit OS. Thanks, Moises

  Hello

  There are two options available.

  1. you can order a set of replacement recovery disks using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.

  Order HP recovery disks.

  2 another option that you might consider is to create your own Windows 7 installation disc.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the Disk Image correct ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium 64 - bit ) from the link below and use an app like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn offerings) to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  The source of the Windows Image is Digital River.

  Windows 7 Home Premium 64 bit SP1.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  You may need, additional drivers and software are here.

  Kind regards

  DP - K

• Satellite X 200 and Windows7 (32 bit) - card reader does not work

  Hi all
  I hope someone can help.
  My X 200-219 has been recently upgraded to Windows7 and although it works well (better), the card reader does not work.

  Do I need a driver installed?
  Various looked but can't find anything obvious?

  Bravo and thank you
  DB

  Hello

  Try to install THIS driverplease.

  It is Vista 32 bit driver for digital multimedia card reader. I hope that it will work.

  Send comments.

• I'm under windows7 64 need the 32 bit version of firefox to run Adobe?

  Tried to download the latest Adobe flash will not work, recommend to download your 32-bit version of Firefox? I am running Windows7 Professional 64-bit, yahoo mail and I think that Facebook came out with the 64-bit version? you point me in the right direction on how to sort?

  There are two different versions of Flash, ActiveX for IE version and the version of the plugin used by most other browsers.

  1. download the Setup file of Plugin Flash version here:
  
  Adobe Flash - Plugin version.
  
  Save it to your desktop.

  2. close Firefox using file > exit
  
  Then check the Task Manager > processes tab to make sure that firefox.exe is closed.
  
  {XP: Ctrl + Alt + Delete, Vista: Shift + Ctrl + ESC process tab =}

  3. then run the Flash configuration from your desktop file.

  4. run Firefox and test your installation here: https://www.adobe.com/software/flash/about/

  • On Vista and Windows 7, you may need to run the installer of plugin as administrator by starting the installation program via the context menu if you do not get a UAC prompt for permission to continue (that is to say that nothing seems to be happening).

  See this:
  
  http://vistasupport.MVPs.org/run_as_administrator.htm

• Stor.e Basics 1 TB USB3.0 & 2.0 transfer speed slow drive HARD Portable on Windows7

  Hello, I recently bought a couple of these bases Stor.e 1 TB USB3.0 & 2.0 HDD Portable of pcworld, bought 2 drives good previous experience, but now I think that because this is a new batch of discs (made in June 2012, instead of dec 2011 my last work entirely without problem stor.e Basics portable HARD drive) I now have the problem of slow start & stop/pause when the transfer of large files medium size 2GBs to 5GBs each (or more) of my Windows 7 laptop to laptop HARD drive using the USB 2.0 standard.

  the previous player without problem (made in Dec 2011), when the file transfer starts the application used to start at about 40 MB/s then falls to about 30 MB/s and stabilize all about this speed, these lots of June 2012 starts slot 20MB / s and falls below 5 MB / s.

  but that is not the big problem, the big problem is now transfer is in pause/stop and departure, transfer of a few seconds, then stopped for 10-20 seconds and agains starts, then stops / pauses, so used to take the couple minutes portable portable HARD drive transfer a file of 4 GB, but now takes ages (7-8 minutes or more) because of the slow speed and stop/pause & start the problem.

  I haven't changed anything on my laptop Windows7 and other drives of 1 TB per other manufacturers/brands are fine, so that means Toshiba must have changed some hardware or software/firmware of the player, lastest new problems, new batch, batch previous everything was fine.

  At first I thought it was just 1 player that could be the problem, but now readers have tested and both have the same problem. Oddly enough if the disc seems to be ok/normal when I transfer on my Vista laptop, which is usually always slower when trasnfering over the laptop Windows 7, Vista typically files transfers to nearly 20 MB/s while Windows 7 to about 30 MB/s. But now the two Toshiba drives during the transfer on the Windows 7 laptop, slower starts (compared to the Dec2011 lot), and then descends slot 5 Mbps, then stops / pauses, then starts the process repeated several times, and then finally completed the transfer.

  Also 'time remaining' bit in "file transfer popup", told me how much minutes & seconds to transfer, almost immediately (usually less than 5 seconds) when I start the transfer, but now if I transfer a big'ish of the file for example 2 GB + 'time remaining' says 'Calculation' for a while (10to20 seconds or more), then finally tells me the time remaining. So everything is just much slower compared to before.

  Anyone know what is the cause of problems in promoting news readers? necessary updates?
  Thank you
  Dave

  > anyone know what is the cause of problems in promoting news readers? necessary updates? Thank you

  Not sure if I can help, but have you tried to format the external DRIVE to NTFS drive?
  Try to do this.

  But generally the start & stop/pause should not appear when transferring large files so possibly it could be a HARD drive problem. Its odd that this happens with both hard drives, but a HARD disk problem could also be possible.

• How to repair a corrupt installation of Windows7?

  Could someone advise how to fix a corrupted installation windows7 with on a departure upward or back up the version?

  As we please what model phone you have and what is the problem with Win7 preinstalled?
  If there are a few small question just try to roll back OS to an earlier time using System Restore tool.

• Windows7 Sound drivers for DV7-1285DX

  Hello
  
  I installed Windows7 on my laptop DV7-1285DX in order to test the new operating system. I d I would like to know where can I get some audio drivers that will make my computer laptop-s speakers to work properly.
  
  At first I noticed how the lack of bass. Then I searched and installed the driver sp41698.exe but I only hear the bass speaker and the mute icon on the quicklauch on the laptop Panel is always on orrange/red and there won t change color; He cut the sound (bass speaker). The main spealers produce no noise.
  
  any ideas on how to solve this problem?  I'd be happy.
  
  Thank you =)

  Yes, it is resolved. The thing is that I know exactly how I did it. I think that I reinstalled the drivers like crazy until it fixed somehow itself. I also have problems with the touch-bar where the MediaSmart, Volume and rewind, play/pause, forward, stop icons are displayer. I had the muted orange light volume always displayed and it also attaches...
  
  I don't really know how. But do not hesitate to contact me if you need further assistance with win7 and this model of laptop.
  
  Saludos

  Message edited by Wendy on 2009-07-10 09:15