Security WRT54G problems

Similar Questions

• HP mini 110 unlock, after successful computer unlock, website security certificate problem

  Web site security certificate problem

  Ok

• connection iPhone WRT54G problem

  I have an iPhone 3GS that I am trying to connect to my home network but have a problem.

  My router is a WRT54G that is set up with WPA2 Personal.  I have connected a laptop computer and two TiVo for this network using the key I have the Setup on the router but I can't my iPhone to connect to the network.  Am I right in thinking that when fror iPhone ask you the password, it actually asks the key?

  If this is the case, the phone sees the network but will not accept the key.  I just get a message saying that it is impossible to connect to the network.

  Am I missing some sort of setting?

  Hello!

  Please check the version of the firmware on your router and its hardware version (if it is low version, be sure to update its firmware for more later). Before upgrading the firmware, try disabling wireless security and check if all devices will connect including your iphone 3GS. If it works, it can be a security problem, try tweeking the algorithm for WPA2 Personal (you can use only AES or TKIP and AES or TKIP).

  Once you are done with this option, and even your iphone 3GS does not connect, it may be that the router is not compatible with the latest iphone 3GS. Try to connect your iphone 3GS to other networks and network your friend if possible use an (old or new) Linksys router.

  In any case, there is no harm to the checking options. My friends meet same question you have, but it worked after that we tried the steps above. Good luck!

  > jam!<>

• Configuration WRT54G problems

  I put my WRT54G Router returned to service after two years somewhere else. Configuration went well up to a point, but I'm unable to change the settings (at least) two areas of wireless configuration.

  First of all, the router is now set to WPA Personal and I want to change my personal WPA2. In the basic/WIreless wireless settings page, I choose WPA2 from the drop-down list box, but he immediately returned to WPA. Second, I want to restrict the use of a specific set of MAC addresses. Wire/Wireless MAC Filter, I can click on the 'Enable' radio button, but it jumps to "turn off" immediately.  Powering everything down, leaving everything and restarting has no effect.

  The bottom of the router is marked WRT54G V8 and the status page displays FIrmware Version: v8.00.0, January 16, 2007. I thought that a firmware update might be in order. Downloads WRT54G (http://www.linksys.com/us/support-article?articleNum=148648) shows version numbers upward through 8.2, but nothing in 5.0 and above says, "No download of the firmware/driver available." Version 4.0 offers v4.21.5 (24/02/2012). What is the current version of the firmware? Seems a lot lower than 8.00.0.

  Firmware upgrade or not, I want to be able to change the wifi settings.

  Options?  Thank you.

  I use a wired to the router, even if it goes through another router first as an additional firewall. I did the hard reset twice with no improvement in the situation.

  Then I discovered the problem: for some bizarre reason, Linksys requires cookies to make changes on the mode of security and MAC, filtering of the screens. I use a strict cookie Manager in Firefox, and once I have authorized temporarily cookies all went well.

  Sorry for the misdirection.

• WRT54GS problem with bittorrent

  I have a WRT54GS, flashed to firmware v 1.52.8. It was working fine until a recent move. I put in place after that I moved into my new place and got connected services (Comcast) and that's when I noticed the problem. I have a PC connected via CAT5 via the router and use the point wireless for my laptop. In the past, my average download speed on torrents with seeds decent were about 1.5-3 MB/s (Yes, it's MBps Mbps not...) I know the difference) recently however, they head to anywhere from 150 to 250 Kbps Kbps. Uploads are not affected... they seem to be on average about the same. In addition, during the torrent download, web browsing/email/etc does not work: everything happens to expire despite the QoS settings I have in place on the router to avoid these problems.

  At first, I assumed it was my ISP throttling my connection - Comcast has been called to do in the past, after all - but after testing the Glasnost reported no limitation by my ISP, I tried with the PC connected directly to a cable modem. Result: sustained speeds of download of 2.5-3 MB/s during two trials downloads (Ubuntu Installer ISO). During these downloads, I could navigate to wesites without getting timeout errors as I do when behind the router. This highlights quite peremptorily the WRT54GS as the source of my problem, so I wonder if anyone has any suggestions to solve this other than to launch the router and get a new.

  EDIT: I should mention that I have only torrent on the PC, so it's not a wireless issue.

  Do a reset factory and try it without changing all the settings except the foundations (e.g., wireless security, password)

• NAT on Xbox Live with WRT54GS problem

  I have a WRT54GS v2 and I tried to solve the NAT problem I had whenever I have test Xbox Live.  I felt like I've done the research so much on this and I can not get it out of a moderate or strict NAT.  I did the port of release for the 88 and 3074-port, feature disabled the "block internet anonymous requests" and updated to the latest firmware and I have nothing will open the NAT.  This is the first time that I ever had a NAT problem with a Linksys router hooked up to my Xbox 360 and I want to know once and for all, what steps I must take to open the NAT.  Can someone please... Please... Please give me some instructions step by step on how to open the NAT?

  First upgrade the Firmware of the router... Download the Firmware from here , after downloading the firmware, you must update the firmware...

  Follow these steps to upgrade the firmware of the device: -.
  Open an Internet Explorer browser page. In the address bar type - 192.168.1.1
  Let the empty user name & password use admin lowercase...
  Click the 'Administration' tab - then click on the 'Upgrade Firmware' under the tab-here, click on 'Browse' and navigate the .bin firmware file and click on "Upgrade"...
  Wait a few seconds until it shows that "the update is successful," after the upgrade of the firmware, click on "Reboot" and you will be returned to the same page OR it will say 'cannot display the Page.

  Press and hold the reset for 30 seconds button.
  Then, unplug the Dungeon to be able to hold down the reset button for another Seconds.Plug 30 the power back in and hold the reset button for 30 Seconds.Release the reset button. Now, you will need to reconfigure your router...

  If your ISP is cable follow this

  If your ISP is DSL follow this

  For X - Box: click on the tab "Games and Applications" and then click the sub-tab "Port Range Forwarding"...

  (1) on the first line in the box, type Application in the Xbox, in the start box, type 88 and type of box in 88, leave the Protocol as and under type 192.168.1.20 ip address and check the box to enable...

  (2) on the second line in the box of Application in Xbox1, in the start box, type type in 3074 and end in 3074 box type, leave the Protocol as and under type 192.168.1.20 ip address and check the enable box and click on save settings...

  (3) once you return to the game to the top page, click the Security tab and uncheck block anonymous Internet requests and click on save settings...

  4) click on Setup and change the size of the MTU to 1452 and click on save settings...

  (5) now assign the IP given on your Xbox
  Go to the network settings on your X - Box, then go to the settings of IP address and select manual ip/static ip and enter in this

  IP address:-192.168.1.20 default :-255.255.255.0 gateway/gateway/router subnet mask:-192.168.1.1... Save settings...

  (6) also assign addresses dns on Xbox
  Primary DNS:-4.2.2.2... Secondary dns:-192.168.1.1... Save settings...

  (7) turn off your modem, router and Xbox... Wait a minute...

  (8) plug the power to the modem first, wait a minute and plug the router power cable, wait another minute and turn the Xbox and... test it connects...

• 2016-002 App Store of security update problem

  I downloaded and installed Security Update 2016-002 10.10.5 three times, and it always appears as an update that is available on the App Store.

  It also appears as having been installed 3 times today (each of these updates in double has its own line) under "Installed updates in the last 30 days" under updates.

  What gives?

  This means generally that it is not actually be installed.

  I recommend that you manually download this update combo, which is supposed to have that security update as well and see if that fixes the problem and that he fixes what might be bad start.

  Download update of OS X El Capitan 10.11.4 Combo

  Sorry, I do not take that you're still in Yosemite! Here is this update of security for Yosemite itself that you can install manually.

  Download Security Update-2016-002 Yosemite

  By the end of 2012 mini Mac, OS X El Capitan 10.11.4. Apple Watch, 38 mm silver AL, Watch OS 2.2; iPad 2 Air & iPhone 6 + iOS 9.4

• Security update problem - trying to update from McAfee!

  try to install McAfee 2011 3 users Total Protection with installation CD.  After spending the last 4 hours online with them, they claim I have windows update problem - shows up in the history as: for.NETon of a security update windows XP, windows Server 2003, windows vista, windows 7, vista windows 2008... KB2160841.  Finally, they said that the problem of 'failure' to be fixed through windows before my McAfee can be updated? !!! Help!  already four hours online trying to fix! :(

  See Andre.Ziegler response to a previous post, involving the KB:

  Error: WindowsUpdate_00000002 when installing .NET Framework 4 (KB2160841)

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/07e67bc5-1841-4972-Bac4-7a1d81dba8e7

• Update of security causing problem

  July 15 security updates caused my computer does not recognize is not the secondary hard drive, which is the cd-rom drive, ideas on how to fix? I am running XP.

  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.windowsupdate&cat=en_us_d99bb655-a5d5-4C07-bdb0-90caf9f30c42&lang=en&CR=us

  Microsoft.public.windowsupdate discussions

  The focus group above will help you with your XP update problems.

  XP discussion groups:

  http://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.WindowsXP.General

  Link above is to the XP newsgroups.

  There is a list of groups of discussion XP to the bottom of the left column.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Windows update KB 2686509 security installation problem (error code is 0X8007F0F4)

  original title: I'm having a problem installing to a KB 2686509 windows security update.  The update downloads but continues to do not settle.  The error code is 0X8007F0F4.  What can I do to solve to partition?

  This installation has "failed" to install several times.  I keep getting the security shield on the toolbar.

  Hello

  I suggest you follow the steps listed in this article and check if this may help.

  http://support.Microsoft.com/kb/958051

• Malwarebytes MS Security Center problem reports.

  After installing Windows Security Essentials (MSE), I ran Malwarebytes' Anti - Malware (MWB).  He reported this:

  Infected registry data items:
  HKEY_LOCAL_MACHINE Center\UpdatesDisableNotify (Disabled.SecurityCenter)-> Bad: (1) Good: (0) not-> no action taken.

  Is suggesting that MSE is to blame for this registry problem (if it is indeed a problem), or maybe it was a problem that existed on my system before I installed MSE and appear all the time because I ran MWB before installing MSE?

  How can I "fix" this issue?

  -Jim

  It's probably a pre-existing condition.

  Assuming XP, open the Security Center - of the control panel and click on change the way Security Center alerts me. You can enable or disable notifications as desired.

  -steve

  ~ Microsoft MVP Windows Live ~ Windows Live OneCare | Live Mesh | MS Security Essentials Forums moderator ~.

• PS3 XP and WRT54GS problems

  Equipment: 1 home computer: Microsoft Windows XP Home Edition Version 2002 Service Pack 2 (several others include: Vista with all updates and a MacBook Pro, but the computer is the computer with all the software)

  2 Linksys Wireless-G Broadband Router With Speedbooster. Model WRT54GS

  3 PS3 with all firmware updates

  Problem: I'm having serious problems with practically everything in this configuration... Problem: my router Linksys software gives me the error message: "problem! Internet connection does not work. "Even with this error, I always get a wireless connection on all computers, the PS3, and a PSP in the House.  I did everything the software told me to do and I still get the error message.  Problem 2: At random times when I use the internet options on my PS3 to the internet disconnects from everything, (including the PS3), and I have to disconnect and reconnect the router to get things working again.  This problem tends to occur at random times every time I use the internet on my PS3 but on my PS3 which kills the internet every time, there is a specific function: multimedia Streaming of my XP for my PS3.

  If anyone can help me to solve these problems, I would be deeply grateful!

  LELA update.linksys.com/lela/install/lela.exe update

• EA6500 FTP security &amp; server problem

  I'm fairly knowledgeable about computers, but still learning my way around networking.  There are two ethernet cables to come to my house with optical fiber connections high speed.  There is a router on both of them and I have therefore 2 WI - fi networks.  I have a 2 t HD Seagate attached to the EA6500. Access to records is enabled and I have a name of user and password set up so I can see the drive of all my devices.  It is mapped as a network drive on a window 8.1 machine and a Windows 7 laptop.  I'll try to set up a ftp server on one of them, but when I'm at the EA6500 last week, I discovered that he has built in ftp server.  I turned and tried to open a session.  I tried networks as well as the 4 g network on my phone.  4g just give an error, but the connection request came when I was on one of the networks.  My credentials have been accepted, the ftp screen came, but no drive and no file.  I spent an hour for most useless on the phone with Linksys support, but have learned one thing: when I disabled access to the records, and then the disc with all the files appeared.  However, no newspaper was asked.  Enter "ftp: / / {ipv4 address}" product page ftp in my browser with all the files revealed.  In addition, access to the files on my network was of course now disabled.  I asked the tech by the lack of a connection is required, and she told me that I only knew that the address ip so no one else would be able to see my files.  I almost called her a stupid at this point.  Unfortuneatley she seemed not very security conscious or not even aware of how ridiculous that was.  I have re-enabled access to the folder and the disabled of course ftp again.  A refresh of the page in the browser returned to the blank page of ftp.  Is it possible to use effectively the built in Server ftp securely?

  Now if I'm in a remote location, I can connect account Smart Wi - Fi, will disable access to files and turn on ftp temporarily, then access my files and ftp, then backtrack.  It's a work-around that I don't like.  Someone managed using the Linksys FTP safely while maintaining access to local folders?  Also, is there a way to limit the connection to a particular username?  The customer accounts and admin (password w/router) have already been awarded to highly secure passwords, but the one I used for local access, not so much.  If I get this job, which apparently won't be enough, because it doesn't seem to be a way to make the distinction between a local and a remote user in the settings of the router.

  Hold on!   AHA!  I think that I thought about it!  The correct answer to your question should have been no. only, I created a user, but I did not know that the 'actions' were added to the user by clicking on the blue word 'actions' next to my username.  So NOW, when I try it in Google Chrome, voila! I can see the files.  I turned it back off again, so I can create a combo/part of the user with a good password.  One problem remains.  I tried adding the actions first by clicking on the admin user.  Now, I don't see a way to edit the admin user to disassociate the part.  I really didn't have admin access.  I was only adding the part as a test, but now it seems that it is there to say.  Please don't tell me I have to reset the router to get rid of it.

  What a pity that phone support is not able to explain on the management of stocks.  Just ask me about stocks helped helped focus my attention on the right box.  Thanks, chadster766!  I ' l count this issue resolved and leave the issue with admin for another ad if I can't understand me.

• LAN with WRT54G problems

  I have 2 XP PCs connected (wired) to a WRT54G v.3 with firmware 4.21.1 version and both are connected to the internet without any problem, but I was never able to get the PC to another see over the local network. I can't even give them a ping between them.

  If someone could help it would be greatly appreciated. Can I have a defective unit?

  Thank you.

  Turn off the firewall and Antivirus on your two computers and then try to ping and check if you have all the answers.

  Click here and follow the steps, how to enable the sharing of files between your computers.

• Customers table WRT54GS problem

  After Update v.5 WRT54GS with the construction of the 1.57.7 firmware 013 dated July 27, 2009 (and a router of the reconstruction after the reset procedure) I find that the customers table is empty or incomplete. I would like to know my equipment local IP addresses, once they negotiate a DHCP lease with the router. Someone can tell me why this is happening and is there a solution? (Everything on the LAN seems to be communicating OK, even if it is not listed in the Active IP Table.) Thank you.

  All seven devices are configured for DHCP. Strangely, in the last 24 hours, I've seen the devices appear in the table customers, one at a time. Now, they're all here. It's as if the old leases were to expire until they stood again. Maybe they have been reassigned new IPs, I don't know... in any case, the problem solved itself. Thanks for the reply.