Similar Questions

• A310 TV input connection

  Can anyone advise me on the correct cable to buy so that I can connect my A310 to my wall socket to TV?

  I have had this machine for 2 months now and have searched high and low for the right cable, but it is a kind of unusual input jack.

  I am in England and I suspect that WE are machines with US, the entries, but I can't be the only one with this problem.

  I have actually managed to pass to the tech support phone line this morning, but it was no help: he couldn't understand what I was asking. I have no idea what country it was, but I guess it wasn't in the United Kingdom.

  Someone on this forum can help me please?

  Please, I beg you.

  Steve

  Nice find Wahter! It really looks like a MCX connector.

  If we are right, therefore a male MCX to F-connector female adapter that came with my A300. For Europe, it would be a MCX man for woman Belling-Lee.

  On eBay, I see many TV PCS adapters in the form of cables or connectors.

• Problem - VGA output VGA or HDMI port does not work when the connection to the input of your TV

  Problem of VGA output - using an acer aspire 5520-5912 trying to connect it to the TV input - connect S-Video works well - port however VGA or HDMI does not work - 1 when I plug the VGA cable that goes to an entry of RD Gr Bl on TV, my screen goes black - as soon as I unplug the cable and press FN + F5 I get the screen back - if I restart the computer in order to have the computer to identify the external screen it will just a black screen when the priming. Troubleshooting using no external monitor is identified unless I use the S-video connection.  The Hdmi connection gives me the same result that the VGA - convenience store attempt will identify the computer screen.  OPSYS Vista. Thank you

  Hi cdk14031

  
  You have set display up-to-date drivers installed?

   

  Step 1 :
  To resolve the problem, you can check if the uninstall and reinstall so help display drivers.
  Also check if you have any exclamation point or cross the marks on the sides of display devices listed in Device Manager.

  a. click Startand then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand display driver, display devices, right-click and then click on Properties and on the driver tab, click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  After the computer restarts, the drivers will be installed automatically.
  
  Step 2:

  If the problem persists I suggest you to check if you install the latest updated driver on the manufacturer's Web site to help you.

   

  You can also check out the link below and check if you get an updated video driver. You can install updates in optional updatesvideo card driver.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  
  You can also check the support link and check if these help - below

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  I hope this helps.

• Problem creating Web Service in 11g of PeopleSoft WSDL

  I created a Web Service in PeopleSoft (8.48 tool version 9.0) of a component based on POSITION_DATA Interface. Trying to create a web service in JDeveloper 11 g to connect to it. Create a new Web Service, Web Service Proxy type. Select the Style of logic Web JAX - RPC. Paste the WSDL (http://xxx.com:11001/PSIGW/PeopleSoftListeningConnector/CI_Z_POSITION_DATA.1.wsdl) address. Any type or style, I get the same error.
  
  Document: http://xxx.com:11001/PSIGW/PeopleSoftListeningConnector/CI_Z_POSITION_DATA.1.wsdl is not a wsdl file or does not have an element root "definitions" in the namespace "http://schemas.xmlsoap.org/wsdl/" or the "http://www.w3.org/2004/08/wsdl" namespace :
  at oracle.j2ee.ws.wsdl.xml.WSDLReaderImpl.parseDefinition(WSDLReaderImpl.java:723)
  at oracle.j2ee.ws.wsdl.xml.WSDLReaderImpl.readWSDL(WSDLReaderImpl.java:661)
  at oracle.j2ee.ws.wsdl.xml.WSDLReaderImpl.readWSDL(WSDLReaderImpl.java:610)
  at oracle.j2ee.ws.wsdl.xml.WSDLReaderImpl.readWSDL(WSDLReaderImpl.java:333)
  at oracle.j2ee.ws.wsdl.xml.WSDLReaderImpl.readWSDL(WSDLReaderImpl.java:570)
  at oracle.j2ee.ws.wsdl.xml.WSDLReaderImpl.readWSDL(WSDLReaderImpl.java:548)
  at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader.readWSDL(CachedWSDLReader.java:372)
  at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader.readWSDL(CachedWSDLReader.java:294)
  at oracle.jdevimpl.webservices.wizard.jaxrpc.common.SpecifyWsdlPanel.fetchWSDL(SpecifyWsdlPanel.java:1002)
  at oracle.jdevimpl.webservices.wizard.jaxrpc.common.SpecifyWsdlAndMappingFilePanel.fetchWSDL(SpecifyWsdlAndMappingFilePanel.java:232)
  to oracle.jdevimpl.webservices.wizard.jaxrpc.common.SpecifyWsdlPanel$ 1.run(SpecifyWsdlPanel.java:346)
  at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:643)
  at java.lang.Thread.run(Thread.java:619)
  
  The WSDL looks like this. When I access them directly in Internet Explorer it says that it is active. Anyone have any ideas?
  <? XML version = "1.0"? >
  < wsdl:definitions name = "CI_Z_POSITION_DATA.1" targetNamespace = "http://xmlns.oracle.com/Enterprise/Tools/services/CI_Z_POSITION_DATA.1" xmlns:M264705. V1 = xmlns:M650531 'http://xmlns.oracle.com/Enterprise/Tools/schemas/M264705.V1 '. V1 = xmlns:M970925 'http://xmlns.oracle.com/Enterprise/Tools/schemas/M650531.V1 '. V1 = "http://xmlns.oracle.com/Enterprise/Tools/schemas/M970925.V1" xmlns:plnk = "http://schemas.xmlsoap.org/ws/2003/05/partner-link/" xmlns:soap = "http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tns = "http://xmlns.oracle.com/Enterprise/Tools/services/CI_Z_POSITION_DATA.1" xmlns:wsdl = "http://schemas.xmlsoap.org/wsdl/" xmlns:wsp = "http://schemas.xmlsoap.org/ws/2002/12/policy" >
  < wsp:UsagePolicy wsdl: required = "true" / >
  < plnk:partnerLinkType name = "CI_Z_POSITION_DATA_PartnerLinkType" >
  < plnk:role name = "CI_Z_POSITION_DATA_Provider" >
  < name plnk:portType = "tns:CI_Z_POSITION_DATA_PortType" / >
  < / plnk:role >
  < / plnk:partnerLinkType >
  WSDL: < types >
  < xsd: Schema elementFormDefault = "qualified" container = "http://www.w3.org/2001/XMLSchema" >
  < xsd: import namespace = schemaLocation="M970925.V1.xsd"/ "http://xmlns.oracle.com/Enterprise/Tools/schemas/M970925.V1" >
  < xsd: import namespace = schemaLocation="M650531.V1.xsd"/ "http://xmlns.oracle.com/Enterprise/Tools/schemas/M650531.V1" >
  < xsd: import namespace = schemaLocation="M264705.V1.xsd"/ "http://xmlns.oracle.com/Enterprise/Tools/schemas/M264705.V1" >
  < / xsd: Schema >
  < / wsdl: types >
  < name = "M970925. "V1 wsdl: message" >
  < wsdl:documentation > M970925 < / wsdl:documentation >
  < element wsdl: part = 'M970925. V1:Get__CompIntfc__Z_POSITION_DATA"name ="parameter"/ >
  < / wsdl: message >
  < name = "M650531. "V1 wsdl: message" >
  < wsdl:documentation > M650531 < / wsdl:documentation >
  < element wsdl: part = 'M650531. V1:Get__CompIntfc__Z_POSITION_DATAResponse"name ="parameter"/ >
  < / wsdl: message >
  < name = "M264705. "V1 wsdl: message" >
  < wsdl:documentation > M264705 < / wsdl:documentation >
  < element wsdl: part = 'M264705. V1:IBResponse"name ="parameter"/ >
  < / wsdl: message >
  < name of wsdl: portType = "CI_Z_POSITION_DATA_PortType" >
  < name of wsdl: Operation = "CI_Z_POSITION_DATA_G" >
  < wsdl:documentation > CI_Z_POSITION_DATA_G < / wsdl:documentation >
  < message wsdl: Input = 'tns:M970925. V1 "name ="M970925." V1 "/ >"
  < message wsdl: output = 'tns:M650531. V1 "name ="M650531." V1 "/ >"
  < message wsdl: Fault = "tns:M264705. V1 "name ="M264705." V1 "/ >"
  < / wsdl: Operation >
  < / wsdl: portType >
  < name of binding wsdl: Binding = "CI_Z_POSITION_DATA_Binding" type = "tns:CI_Z_POSITION_DATA_PortType" >
  < style: binding soap = transport "document" = "http://schemas.xmlsoap.org/soap/http" / >
  < name of wsdl: Operation = "CI_Z_POSITION_DATA_G" >
  < soap: operation soapAction = "CI_Z_POSITION_DATA_G.V1" style = "document" / > "
  < wsp WSU: ID = "UsernameTokenSecurityPolicyPasswordOptional" xmlns:wsu = "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" >
  < ExactlyOne >
  < wsp >
  < wsp:Usage = wsse:SecurityToken "" wsp: required "xmlns:wsse ="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">"
  WSSE: UsernameToken < wsse:TokenType > < / wsse:TokenType >
  < claims >
  < SubjectName MatchType = "wsse: Exact" / >
  < UsePassword wsp:Usage = "wsp: Optional" / >
  < / claims >
  < / wsse:SecurityToken >
  < / wsp >
  < / ExactlyOne >
  < / wsp >
  < name = "M970925. "V1 wsdl: Input" >
  <: body soap encodingStyle = use "http://schemas.xmlsoap.org/soap/encoding/" = "literal" / >
  < / wsdl: Input >
  < name = "M650531. "V1 wsdl: output" >
  <: body soap encodingStyle = use "http://schemas.xmlsoap.org/soap/encoding/" = "literal" / >
  < / wsdl: output >
  < wsdl: fault name = "M264705. V1 ">
  <: error soap encodingStyle = "http://schemas.xmlsoap.org/soap/encoding/" name = 'M264705. V1 ' use = "literal" / > ".
  < / wsdl: Fault >
  < / wsdl: Operation >
  < / wsdl: Binding >
  < wsdl:service name = "CI_Z_POSITION_DATA" >
  < wsdl:documentation > CI_Z_POSITION_DATA < / wsdl:documentation >
  < binding wsdl: port = "tns:CI_Z_POSITION_DATA_Binding" name = "CI_Z_POSITION_DATA_Port" >
  < soap: address location = "http://ORACLE_ENDPOINT" / >
  < / wsdl: port >
  < / wsdl:service >
  < / wsdl:definitions >

  Hello

  You are looking at your URL of the WSDL document, the IB PeopleSoft should contain 'Service' in its name, it seems you are using rather your IB Gateway URL.

  That's what you posted:

  -http://xxx.com:11001/PSIGW/PeopleSoftListeningConnector/CI_Z_POSITION_DATA.1.wsdl

  Try the following, and this should solve your problem.

  -http://xxx.com:11001/PSIGW/PeopleSoftServiceListeningConnector/CI_Z_POSITION_DATA.1.wsdl

  Kind regards
  Dan

• Analog inputs measures with NI6229 using the DAQmx driver

  Hello

  I have four different analog inputs connected to ai0 to HW 6220 ai3. I read these values with a single task, all 4 channels assigned to this task. When ai0 reads 7V, I see 0.8 V ai1 too, but I expect to be measured 0V. If I just assign ai1 to the task and measure all 4 channels, then I measured 0V as expected (although ai1 contains 7V, I just don't measure it).

  Another comment 'funny', is that if I change the order in which I add channels to the task, measurement errors are different.

  However, when measured with a multimeter 4-channel show tensions as expected.

  Given that my calling task is can not block, I call the function

  DAQmxReadAnalogF64 with timeout = 0 and numSampsPerChan = 1.

  Any help is appreciated.

  Thank you

  Kind regards

  Deepa

  Deepa,

  Thanks for the code snippet.

  When you call DAQmxReadAnalogF64 the first time and you set a value of timeout of 0, there is a chance that the acquisition is not yet initialized. This is the expected behavior and should not be a problem. If the timeout error died at the first call, you might ignore it or set a different expiration time for the first call only. In all cases, you should drop the first value and start with the second value.

  Jochen

• Upgrade the forces ' no more connections can be made... "message from XP Pro for... what? A server? Win 7?

  I have a pc four network all current XP to run. System has XP Pro. Since the addition of backup Carbonite has I run its 'input connections' when I try to access the network by the error message "no connection is possible to this remote computer at this time because there are already as many connections as the computer can accept." I reduced the AutoDisconnectTime of 15 minutes to 2 minutes perhttp://support.microsoft.com/kb/314882 with no benefit. I ran Netstat and TCPView with no illumination. So far, the Council must "upgrade server" or possibly for Win 7. Or the other of these works would be? Re 'server', I have no plans to add a fifth pc system. Can I just replace XP Pro on the system has a server sw offer? What server sw? If I take it will be all on system A look and operate as it does now - with the exception of the fixing of the problem?

  Monday, January 31, 2011 20:06:34 + 0000, Petermat wrote:

  If I go for Win 7 is the fact that I have four systems means that I have to buy two copies of the upgrade "three pack? I don't want to maintain both XP and 7 if I can avoid it.

  You are right that you can't use a pack of three on four computers. You
  buy two packs of three - or, better, a pack of three and a normal life
  a package.

  Ken Blake, Microsoft MVP

• 23 - d060qd envy: input set Windows 10 Upgarde HDMI port no longer works

  Just updated my PC Envy 23 to 10 Windows desktop computer.  I have a game on the PC HDMI input connection that I use in conjunction with my work laptop.  After the upgrade when I press the button for the game of entry so I can see my laptop using the view envy, nothing happens.   Is there a setting that needs to be changed 23 WANT to receive entrance to the laptop?  Help

  I've updated the hp my display application and it started working

• Audio connections on the back panel of XPS 8300

  Audio connections can be found in the Installation Guide PDF differ from my XPS 8300.  The Guide of SU watch 6 connections (in 2 rows of 3) in the middle section (above the expansion card slots) who perform the following fintions;

  The top (from left to right) row - connector Surround l/r Surround l/r rear connector, Center speaker connector

  Row of the bottom (from left to right) - Microphone connector, front l/r output connector, Connector Line In.

  My machine has 5 connections colored in the lower expansion slot, but I have no other document indicated which entry do.

  Connections (running from left to right looking at the rear of the machine) are black, Orange, grey, green, blue.

  Can someone tell me what color does that work?

  Thank you very much

  OldKingCole,

  Black = line 4. Connect the rear left and rear inputs right on analog speakers
  Orange = line 3. Connect the inputs before central and subwoofer on analog speakers
  Gray = line 2. Connect the inputs left and right on analog speakers
  Green = line 1. Connect the inputs front left and front right analog speakers or headphones
  Blue = entry. Performs a function of two in one, take over the input connections microphone and Line In

• Loss of Internet connection and Windows 7

  In our headquarters, we have a desktop system running Windows 7, but also an iMac.  The two are connected to Apple's Time Capsule, which serves as a router and a backup for the iMac hard drive. (our Internet connection is cable Internet, by the way.)

  Since upgrading from Windows Vista to Windows 7, the Windows 7 Desktop faces of frequent Internet connection errors.  Generally, it loses the connection to the Internet several times per day.

  Today, it's the worst event we've seen so far (since the upgrade to Windows 7 last week).  We usually only an Internet connection for about 2-3 minutes, then it is lost and needs to be repaired.

  We enter the control panel > network and sharing Center > issues > Internet connections

  Let us Windows 7 automatically diagnose and repair the problem.

  Whenever he goes through the stages of diagnosis and repair, it ends by "reset the connection area card."

  At the end of the process - after everything has been repaired - we get the following report:

  "Default gateway is not available - fixed.

  Should what measures we take to permanently solve this problem?

  Moreover, the iMac does NOT have Internet connection issues whatsoever.

  Thanks in advance!

  I don't know what you use to assign addresses, so I guess it's a router of some sort. You will need to go to the website of manufacturers, look at the manual and know how to limit the DHCP address field. I changed mine to limit the address 192.168.1.200 thanks 192.168.1.250 DHCP assignment. Your router can use the 10. subnet, so your address may be different, depends on the manufacturer of the router, or if you use a DHCP, the scope with the DHCP server. Gives me 50 IP addresses for all the guests who may want to use wired or wireless connections and should be more than enough. This allows me to attributed to the 192.168.1.1 through 192.168.1.199 a device and not having to worry about the DHCP server, you try to use one that is applied continuously to a device (printer, switch, PC, server, virtual server, etc.).

  Once this configuration of your router, you will now need to assign a static ip address to your PC. All this is done for the network card.

  On the start menu:
  Control Panel
  Network and Internet
  Network and sharing Center
  In the right pane of network and sharing Center
  Change the settings of the card
  Double-click your network adapter
  Check the box «Détails»
  Note the following lines:
  Connection specific DNS (may or may not exist, depends on the provider)
  IPv4 subnet
  IPv4 default gateway
  IPv4 DNS servers

  Once you have written those down, you can close this box.
  You should be back at the "Local Area Connection Status" box.
  Select the option "Properties".
  Select 'Internet Protocol version 4 (TCP/IPv4)', which will be in a blue when selected.
  Now, select the option "Properties".
  "IP version 4 (TCP/IPv4) properties" box should have popped up. If so:
  Select the following text:
  "Use following IP address".
  In the IP address box, enter an IP address. Example: 192.168.1.20
  Press the tab, the subnet must fill automatically, otherwise, enter the "Subnet IPv4" value you noted in the above step. Examp, e: 255.255.255.0
  The bridge of dafult, enter the value of the above procedure. Example: 192.168.1.254

  Now switch to the next 2 boxes, DNS servers. You can have only 1 entry in DNS server of the DNS entry you noted from above.
  Enter the DNS servers that you noted above.

  If there is "Connection specific DNS" writing or entries, follow these steps (otherwise, skip the sections "Connection DNS"):
  Select the option "Advanced".
  The "Additional TCP/IP parameters" window should open
  Select the "DNS" tab

  If it has more than 1 input "Connection specific DNS", follow these steps:
  Select it "add DNS suffixes (in order):
  Select "Add..." »
  In the "suffix domain', enter the first connection specific DNS entry.
  Select the option 'Add '.
  Add all the specific DNS suffixes that you noted. You can enter one at a time.
  When the radio button finished choose "OK".

  If you have only 1 entry in "Connection specific DNS":
  Entitled "DNS suffix for this connection", enter the entry you noted above for the "specific" connection DNS
  When the radio button finished choose "OK".

  Check the "validate their output parameters.

  Select the radio button 'OK '.

  Select the radio button "close".

  You should see the "Windows Network Diagnostics' open and check for any problems. I hope that everything is fine and he says 'Troubleshooting couldn't identify the problem' and choose 'Close the Troubleshooter'.
  Close additional boxes or pop-ups that are open and check and make the connection sure allis. If not, go back and check all the steps. the most common are the IP addresses and gateways.

  Good luck. After back if it solves the problem.

• Impossible to establish a VPN connection with a router configured as a Cisco server using client VPN 5.0.00.0340

  Hei guys,.

  Please help me on this one because I'm stuck enough on her...

  I am trying to connect to a Cisco 3700 router configured as a VPN server by using a VPN client and the VPN connection does not settle.

  This is an extract from the log:

  130 12:48:30.585 07/01/11 Sev = Info/5 IKE / 0 x 63000001
  Peer supports XAUTH
  131 12:48:30.585 07/01/11 Sev = WARNING/3 IKE/0xE3000057
  The HASH payload received cannot be verified
  132 12:48:30.600 07/01/11 Sev = WARNING/2 IKE/0xE300007E
  Failed the hash check... may be configured with password invalid group.
  133 12:48:30.600 07/01/11 Sev = WARNING/2 IKE/0xE300009B
  Impossible to authenticate peers (Navigator: 904)
  134 12:48:30.600 07/01/11 Sev = Info/4 IKE / 0 x 63000013
  SEND to > ISAKMP OAK INFO (NOTIFY: INVALID_HASH_INFO) for 200.100.50.173

  I enclose the whole journal extract... The message "BOLD" is quite obvious, you mean, but I'm 100% sure, in the login entry, I typed correctly the group password: pass

  My topology is very basic, as I am setting this up only to get a clue of the operation of the Cisco VPN. It is built in GNS3:
  -2 3700 routers: one of them holds the configuration of the VPN server and the other would be the ISP through which the remote worker would try to establish a VPN connection. I am also attaching the configuration file for the router configured as a VPN router.

  Behind the second router there is a virtual XP machine on which I have installed VPN client...

  My connection entry in the customer is to have the following parameters:
  Host: 200.100.50.173 , //which is the IP address of the VPNServer
  Authentication-> authentication-> name group: grup1 password: pass / / I'm quite positive that I typed the correct password... even if the log messages are linked to a misidentification.

  I use public addresses only, because I noticed there is a question about behind the NAT VPN connections and is not not very familiar to the NAT.

  Another aspect which can be of any importance is that "allow Tunneling of Transport" in the tab Transport to the input connection is disabled

  and the VPNServer router logs the following error message when you try to establish the connection:

  * 01:08:47.147 Mar 1: % CRYPTO-6-IKMP_NOT_ENCRYPTED: IKE 200.100.50.34 package was not encrypted and it should have been.
  * 01:08:47.151 Mar 1: % CRYPTO-6-IKMP_NOT_ENCRYPTED: IKE 200.100.50.34 package was not encrypted and it should have been.
  

  You have no idea why I can't connect? Y at - it something wrong with my configuration of VPN server... or with the connection entry in the VPN client?

  Thank you

  Iulia

  Depending on the configuration of the router, the group name is grup1 and the password is baby.

  You also lack the ipsec processing game that you would need to apply to the dynamic map.

  Here is an example configuration for your reference:

  http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_configuration_example09186a0080235197.shtml

  Hope that helps.

• Cannot connect AnyConnect Secure Mobility Client IPSec 3.0

  Hello

  Our company has a configuration of IPSec VPN on a Cisco ASA 5505.  We previously using the Cisco VPN Client - Version 5.0.07.0410.  Everything worked well with this customer to date.  The problem is it is not supported in our Virtual Machine, and environment with our new version of our networks paravirtualized drivers we get the problems of inadequacy HMAC and not connect to.

  I created a file .pcf with the following information for the 5.0.07.0410 customer:

  Input connection: VC VPN

  Description: no

  Host: xxx.xxx.xxx.xxx (IP address of the Interface of the ASA VPN)

  Authentication group:

  • Name: The name of the Group
  • Password: password for pre-shared Key

  Transport:

  • Activate Transport tunnel
  • IPSec over UDP (NAT/PAT)

  I import the .pcf file in the client, the client connects, you are prompted for AD username - everything has worked well.

  We have currently met that he had to use the Cisco AnyConnect Secure Mobility Client (3.0.0629) - I tried to use the profile for that AnyConnect client editor and I can't not all profile options.  I leave all the defaults preferences (Part1), preferences (Part2), backup servers, matching certificate, Certificate Enrollment and the mobility policy.

  I in the list of servers, click Add.  I enter in the hostname, host (the host name IP address) address and group.  There are no backup servers, I change the main IPSec protocol, save the profile and place it in C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile (Win7).  Open the AnyConnect Secure Mobility Client and the profile is loaded. Trying to link returns "VPN Agent is unable to establish a connection."  ASA, I don't even see a connection attempts to the outgoing IP address.  On the client, I can ping the ASA and connect with ordinary VPN Client.

  I can't find a place to enter a pre-shared in the profile editor.

  The AnyConnect client seems also not to read the .pcf files.  Am I missing something here?

  My package DART from the failing client is attached.  Any help would be greatly appreciated!

  Kind regards

  Rich Alto

  Rich,

  AC uses IKEv2 (for IPsec) which is not yet supported on SAA. Support is planned for 8.4 ASA which is still at least a few weeks.

  HTH

  Herbert

• Missing for DBAdapter cluster Weblogic Congfiguration outbound connection Pool entry

  Hello

  When I created an entry for outbound connection pool in DBAdapter weblogic console in a clustered (1-Admin server and servers managed by 2) environment and updated adapter DB, I have identified only input connection is updated in that plan a managed server and other server managed, it is not updated. For this reason, we are unable to access the data sources for some requests for the application.

  As a work-around if we plan. XML file to another server managed manually with update and DB adapter connection entry, we are able to find the entrance of connection for managed servers.

  Outside work around there at - it another solution to this problem so that I can add a connection adapter DB Console entry that will update the two plan files.

  Thank you and best regards,

  Vincent

  Can I propose to maintain the file plan of shared drive accessible from all nodes in the server, this will reduce the manual work.

  Concerning

  Albin I

  http://www.albinsblog.com/

• The adapter FTP - synchronous reading - native format

  We could think about what an FTP connection would be simple. I did a bunch of 'puts' without difficulty; I can't get a sync read to work AT ALL.

  What the hell is wrong with this mess anyway? This should be simple.

  Here's my WSDL... What's not here?

  < wsdl:definitions

  name = "getRawFile".

  " targetNamespace = ' http://xmlns.Oracle.com/pcbpel/adapter/FTP/caseList/caseList/getRawFile "" "

  ' xmlns:jca = ' http://xmlns.Oracle.com/pcbpel/WSDL/JCA/ "" "

  ' xmlns:wsdl = ' http://schemas.xmlsoap.org/wsdl/ "

  ' xmlns:tns = ' http://xmlns.Oracle.com/pcbpel/adapter/FTP/caseList/caseList/getRawFile "" "

  ' xmlns:imp1 = ' http://targetNamespace.com/getRawFile "

  ' xmlns:plt = ' http://schemas.xmlsoap.org/ws/2003/05/partner-link/ "

  >

  < plt:partnerLinkType name = "SynchRead_plt" >

  < plt:role name = "SynchRead_role" >

  < name plt:portType = "tns:SynchRead_ptt" / >

  < / plt:role >

  < / plt:partnerLinkType >

  WSDL: < types >

  " < schema targetNamespace = ' http://xmlns.Oracle.com/pcbpel/adapter/FTP/caseList/caseList/getRawFile "" "

                xmlns=" http://www.w3.org/2001/XMLSchema " >

  " < import namespace = ' http://targetNamespace.com/getRawFile "schemaLocation = xsd/F17QBA1_1.xsd""/ >

  < element name = "empty" > < complexType / > < / item >

  < / schema >

  < / wsdl: types >

  < name of the WSDL: message = "Empty_msg" >

  < name of wsdl: part = element 'Empty' = "tns:empty" / >

  < / wsdl: message >

  < name of the WSDL: message = "SynchRead_msg" >

  < name of wsdl: part = element "body" = "imp1:HUDCaseList" / >

  < / wsdl: message >

  < name of wsdl: portType = "SynchRead_ptt" >

  < name of wsdl: Operation = "SynchRead" >

  < message wsdl: Input = "tns:Empty_msg" / >

  < message wsdl: output = "tns:SynchRead_msg" / >

  < / wsdl: Operation >

  < / wsdl: portType >

  < / wsdl:definitions >

  Here's my jca

  < name of the adapter-config = adapter "getRawFile" = "FTP adapter" wsdlLocation = "getRawFile.wsdl" xmlns =" " http://platform.integration.Oracle/blocks/adapter/FW/metadata ">

  < connection-factory location = "ist/Ftp/FtpAdapterP011" / >

  < endpoint-interaction portType = operation "SynchRead_ptt" = "SynchRead" >

  < className = "oracle.tip.adapter.ftp.outbound.FTPReadInteractionSpec interaction-spec" >

  < property name = "DeleteFile" value = "true" / >

  < property name = "PhysicalDirectory" value = "/ opt/oracle/work/domains/dev_total_vr_domain/TOTAL" / >

  < property name = "FileName" value = "F17QBA1" / >

  < property name = "File Type" value = "ascii" / >

  < / interaction-spec >

  < / interaction of endpoint >

  < / adapter-config >

  The answer is: PhysicalDirectory designates the directory where you get the file, not where it is stored.

• URL of BPEL exposed with Http Binding

  Hello
  
  Binding http adapter allows bpel to be called from url using the GET method. But where to find this http url?
  
  I have a bpel connected to the http binding that has generated wsdl below after the deployment-
  
  < name of binding wsdl: Binding = "Process1HttpGET" type = "imp1:Process1" >
  < xmlns:http = "http://schemas.xmlsoap.org/wsdl/http/" = "GET" verb http:binding / >
  < name of wsdl: Operation = "recognize" >
  < http:operation xmlns:http = "http://schemas.xmlsoap.org/wsdl/http/" location = "" / >
  WSDL: input >
  < http:urlEncoded xmlns:http = "http://schemas.xmlsoap.org/wsdl/http/" / >
  < / wsdl: Input >
  < / wsdl: Operation >
  < / wsdl: Binding >
  
  < wsdl:service name = "Service1" >
  < name of wsdl: port = "acknowledge_pt" binding = "tns:Process1HttpGET" >
  < http:address xmlns:http = "http://schemas.xmlsoap.org/wsdl/http/" location = "* http://xxxxxx:7001 / soa-infra/services/default/MessageHandler/Service1 *" / >
  < / wsdl: port >
  < / wsdl:service >
  
  Tried with URLs http://xxxxxx:7001 / soa-infra/services/default/MessageHandler/Service but which does not invoke the service.
  
  I'm sure someone has already tried that... If so please help.
  
  Kind regards
  Viv
  
  Published by: user564736 on January 9, 2013 23:37

  That's how it worked for me. Take the url of the wsdl of deployed service endpoint. Delete the name of the last operation.

  http://server.dev.com:7001 / soa-infra/services/default/AcknowledgementHandler/AcknowledgeService/send

  Add the wsdl message part name and the operationName as below

  http://server.dev.com:7001 / soa-infra/services/default/AcknowledgementHandler/AcknowledgeService? entry = 33323835303038373936353739323436 & * operationName = sending *.

  In my case, wsdl, message type has been defined as -

  
  
  

  Hope it will work for you also.

  Kind regards
  Ashish
  [http://talksoa.blogspot.com]

• Can I use calls for remote access SOAP works on a SOAP server?

  Hello

  I used JavaScript and SOAP with "Acrobat ordinary' (e.g. Acroforms) to connect to a SOAP server, followed by Acrobat automatically set-up of functions I can call some JavaScript which, with the permission of SOAP, are relayed to the SOAP server for execution.  For example, a SOAP server that implements a function of temperature.  After doing the Net.SOAP.connect, my JavaScript magically accesses the Temperature() function, which is then executed remotely on the SOAP server with the SOAP protocol.

  My question is: with Livecycle Designer XFA forms and it is, I don't have the same ability to connect programmatically to a SOAP server and have configured automatically JavaScript functions I can call on the server?  What I've read, there are LC submit and Execute operations that interact (for example exchange data) with a SOAP server specified, but it is not clear that LC offers the possibility to end up with a set of functions that I can call from my JavaScript which are then performed on the SOAP server.

  
  In simpler terms: LiveCycle Designer has the ability to connect to a SOAP server and automatically configured the JavaScript functions I can call (which then get relayed to the SOAP server for execution, followed by the return of my program XFA data)?

  Thank you.

  
  Dave

  I used the same scenario in most of my forms... passing XML as file WSDL input and response using SOAP... Here is an example that might come to our rescue.

  function saveToDocumentum (wfname) {}

  SOAP.wireDump = false;

  var cWSURL = 'http://servername..» "com:" + "/services/" + wfname + "? wsdl"; //use this inspires wisely WSDLURL

  try {}
  var service = SOAP.connect (cWSURL);
  } catch (e)
  {
  App.Alert ("" + e);
  Returns a null value.
  }
  If (typeof service! = "object")
  {
  App.Alert ("could not connect on backwards to" + cWSURL);
  Returns a null value.
  }
  if(service.synchronousInvoke == undefined)
  {
  App.Alert ("could not obtain signature of operation synchronousInvoke");
  Returns a null value.
  }

  var sendXML = null;

  sendXML = xfa.data.saveXML ();
  startAt var = sendXML.indexOf (')<>
  endAt var = sendXML.indexOf (')
  sendXML = '"+ sendXML.substring (startAt, endAt + 13).
  sendXML = replaceAllSpecialChars (sendXML,"&","&");)
  xfa.host.messageBox(""+sendXML);

  var result = service.synchronousInvoke ({inxml: sendXML}); InXml is an input to the end WSDL variable

  Return resultthistime;

  App.Alert(""+result);
  var varma1 = result ['outxml'] //outxml is the name of the variable to the end WSDL and it is in XML format
  App.Alert(""+varma1);

  xfa.host.messageBox ("this request is stored in Documentum with success.", "Status", 3, 0);
  Return "success"; submitResult;

  }

  Good luck