WSF in failure 3%. Unable to detect adapters on blade

Similar Questions

• Unable to detect webcam

  Hello. I am currently using ASUS A43S with webcam in the generation. Since the update to 6.18 my webcam seems unable be detected by Skype. I run a dxdiag.exe and zipped in the attachment below. Hope that my problem can be resolved as soon as POSSIBLE. Thanks in advance!

  The diagnostic tool has crashed on the information system:

  DxDiag previously: crashed in the information system (step 4). Re-run DxDiag with the command line parameter 'dontskip' or choose to not to ignore when you are prompted to collect information could result in DxDiag getting this information

  It would be better to run the 32-bit DxDiag version not all the info is available in the 64-bit version.

  You probably installed Asus Virtual Camera application. Uninstall this application can solve your problem. If this isn't the case, then uninstall the currently installed version of Skype and install the 6.14.104 version by using the download links provided here:

  http://community.Skype.com/T5/Windows-desktop-client/ASUS-USB2-0-webcam-not-recognized-by-Skype-6-18...

  Be sure to turn off the automatic updates.

  Tools-> Options-> Advanced-> automatic updates-> turn off automatic updates

• Re: Satellite L450-173 - unable to detect wireless networks

  I have a similar problem with my satellite L450-173.

  I bought this laptop without OS and installed win 7.
  I found and downloaded the latest drivers toshiba WLAN support and download page and my Device Manager indicates that the device is turned on and that it works correctly.

  However, I am unable to detect the networks without wire in the box (alltough there are at least three in the district).
  I have a home network with the router. When I connect to my laptop with a LAN cable, it connects automatically without problem. But I can not connect via my wireless connection.

  Windows troubleshooting is of no use.
  I downloaded the chipset drivers updated too (following the suggestion by an online forum), but which did not help at all.
  My "doctor Conectivity" reported that my wlan adapter is 'on', but when I enter the 'Radar' option, it reports that this wireless network device is disabled. I tried to disable and then enable once again, but it did not help. I also used the option reset address IP - no use. My IP address is set to auto because my network is connected by the router.
  I tried pressing FN + F8 but I have not noticed any change.

  Indicator LED for a wireless connection at the front of the laptop is always red.
  I read many forums linking similar issues to win 7, but I have not found any solution.

  Any ideas?

  Hello

  Eventually the WiFi network is disabled and so you cannot connect to the Wlan router.
  If the FN + F8 does not change the status of WLan, then it would mean that Don t FN buttons work properly have you checked if the other FN keys work?

  You must reinstall the VAP (value added package) to obtain the keys FN working again
  If you want to use the Fn + F8 then you should see (flashcard) WLan icon on the screen

  Another idea;
  You can toggle the wifi in the Device Manager-> card Wlan-> properties-> Advanced tab.
  Check this box

  PS: If the BIOS is not updated, then you need to update it too!

• Stupid MS is unable to detect the operating system of W2KPSP4 but sees IE6SP1 user agent

  It is ridiculous that Microsoft (coding of Web Pages webmaster) is unable to detect that a user entering the page has a (drop dead) of Windows 2000 Professional SP4 operating system (OS)...

  and then always recommend (MS) install IE 8... When as far as I know... an IE8 installation cannot complete successfully on the OS W2KPSP4?

  Hello

  The Microsoft Answers community focuses on the context of use. Please reach out to the business community of COMPUTING in the TechNet forum below:

  http://social.technet.Microsoft.com/forums/en-us/categories

• Kodak esp5250 printer 3520 error code unable to detect the edges of paper

  error code Kodak esp5250 printer 3520 unable to detect the edge of the paper?

  Please see

  http://support.en.kodak.co.uk/app/answers/detail/a_id/25352/kw/3520/selected/true .

• HP PhotoSmart C4450 All in One Printer is unable to detect the alignment (tried everything) page

  My question is very simple. I tried all the options I could think for my printer detect the alignment page and it is still unable to detect the page. Can someone who has had the same problem please send me a list of recommended procedures to solve the problem? I intend to go through one by one until it is resolved. The post that I found with this exact topic didn't have a sufficient response that other that the user placed a bunch of papers on the page alignment and the printer worked... Could really use some help, my patience is pretty much exhausted. I use a MAC Leopard operating system. Thank you.

  Hi drubio1989,

  What are the levels of ink in each cartridge?  I connected a troubleshooting document that addresses the lack of alignment.  Click here  You could take a look and perform one of the steps that you did not.  Let me know how it goes.

  Good luck!

• Had to replace the hard drive, windows xp restore, now unable to detect wireless networks.

  Had to have my hard drive on my Dell replaced, restored Windows XP netbook, now I am unable to detect wireless networks. Someone at - it the answer? Thank you.

  Hi DeAnnaW,
   
  Follow the steps in this link to fix the problem:
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  Note: The steps in the link are applied to the other service pack versions of Windows XP as well.

• Replaced the hard drive on my dell inspiron 1525 Vista restored. Now "unable to detect wireless networks.

  Replaced the hard drive on my dell inspiron 1525 Vista restored. Now "unable to detect wireless networks.

  MarkWilkins,

  The utility of desktop / laptop must be installed first (if applicable), then the drivers from the chipset. If they are NOT installed everything first, then the rest of the drivers will not install.

  How to download and install drivers in the correct order

  Rick

• IOMEGA external drive has fallen, unable to detect it and use it

  I have an IOMEGA external hard drive and I dropped it by mistake from a height of 1 meter now I am unable to detect it and use it, but I am able to see the power light. Can U help?

  It is likely that the decline has damaged the car.  Visit the Iomega website to see if they have any test software, you can run to confirm this.

  "Raizenpais" wrote in the new message: * e-mail address is removed from the privacy... *

  I have an IOMEGA external hard drive and I dropped it by mistake from a height of 1 meter now I am unable to detect it and use it, but I am able to see the power light. Can U help?

• Oracle Forms Win 7 64 - bit error INST-07407: unable to detect the platform of the machine or pieces of JVM

  
  I'll try to install Oracle Forms 11.1.2.0 on Win 7 64 bit and get INST-07407: unable to detect the platform of the machine or the pieces of the JVM.

  I followed the steps described in Oracle Forms 11.1.2.0 on Win 7 64 - bit bit JVM error but still unable to solve my problem.

  Here are the details of the version of the installed JDK.

  C:\Program Files\Java\jdk1.6.0_45 > java-version

  Java version "1.6.0_45".

  Java (TM) SE Runtime Environment (build 1.6.0_45 - b06)

  Java for 64-bit Server VM (build 20.45 - b01, mixed mode)

  C:\Program Files\Java\jdk1.6.0_45 > % java_home Echo%
  C:\Program Files\Java\jdk1.6.0_45

  C:\Program Files\Java\jdk1.6.0_45 > echo %path%
  C:\Windows\System32; C:\Windows; C:\Windows\System32\Wbem; C:\Windows; C:\Program Fi
  les\Java\jdk1.6.0_45\bin

  Installer: -.

  1 jdk-6u45-windows - x 64

  2 wls1036_generic.jar for 64-bit platform

  3 ofm_frmrpts_win_11.1.2.0.0_64_disk1_1of1

  Please advise. Thank you.

  I don't know if help.

  I have installed Oracle Forms 11 g on Windows Vista Home Edition (64-bit), had been an experience horrible (much testing), although eventually I got.

  If I'm not mistaken, I used this guide:

  Oracle WebLogic & Forms 11g Release 2 installation guide

• cRIO 9076 Unable to Detect physical channel

  Hi all

  I'm currently trying to acquire data using NOR cRIO 9076 controller integrated, but I am unable to create virtual channels using DAQmx. My situation is summarized below.

  Material:

  NEITHER cRIO 9076 integrated controller RT

  NI 9205 analog input module

  E/s digital NI 9403 module

  Software:

  LabVIEW 2011

  Compact-Rio 4.0

  MAX 5.0

  NOR-DAQmx 9.3

  All channels of the C-series module and chassis are visible in NOR Distributed System Manager and Labview Project Explorer.

  

  But when you use MAX to create a new task DAQmx, I can't detect the physical channels. The two NOR-DAQmx in Labview and right-click to headquarters of the MAX data to create NI DAQmx task / Global Virtual Channel give the message "No. supported Devices Found."

  

  In addition, material also doesn't seem to appear under "devices devices and Network Interfaces.  When comes to "find NI DAQmx your network equipment", he stated that "no devices were found. The controller was named "VIGREN. Detect manually by using the host name and intellectual property also failed to detect.

  

  My question is:

  1. How does the PC detects the chassis and modules, but when it come to NI DAQmx, it does not detect the physical channels? What is a software/hardware or network junk?

  2 not compatible with NI DAQmx RT 9076 cRIO controller? And that's why Scan Interface or Interface FPGA used instead? In light of the seamless functionality, I prefer to continue OR DAQmx to configure my acquisition of data.

  Thank you.

  Hi Vigren,

  I think you misunderstand some of the concept here.

  cRio is a real-time system and is not a DAQ board that you can not use DAQmx with it.

  You can refer to this link for discussion for more information

  http://forums.NI.com/T5/Multifunction-DAQ/cRIO-9073-compatibility-with-NI-DAQmx/m-p/1194163#M58721

  You can use the scan or FPGA to purchase.

  TuiTui

• Linksys wireless-g usb network adapter unable to detect the router using windows XP desktop PC

  I've changed in broadband Orange yesterday and since then my adapter is unable to find the network (it was working fine with TalkTalk until I changed).

  He managed to find a couple of other networks that are nearby but nothing else.

  I have a laptop (windows 7) who finds the router Orange immediately. I tested the adapter with the laptop and it finds the router Orange plus about 10 other nearby networks.

  I rang Orange who crossed their tests and not found any problems. I uninstalled and reinstalled the adapter on the windows XP desktop, but I get the same result.

  Can anyone help?

  Thank you

  Thanks for the reply.

  I got it finally work last night after a day of cleaning up!

  Even if the network does not have to be detected in the available wireless networks "choose" I tried the "New Connection Wizard" and entered all the details that came with the router. The adapter found the Orange router but nothing else in the region.

  For now, it works but there is a problem somewhere, because I don't see any networks, I can see on my laptop.

  See you soon.

• Printer intermittently is unable to detect the ink cartridges

  Sometimes my printer works very well; other times are not print and displays the message "print cartridge missing or not detected".  I have checked connections, turned and, closed and restarted, removed and replaced the cartridges, replaced the USB cable, replaced driver assisted automatic, deleted and reinstalled the printer.  Sometimes, the problem seems to be resolved, but always comes back.  This happened several weeks during which failure and attempts at troubleshooting happened probably 30 times.  I have a recent diagnosis page, but do not know how to interpret it.

  The printer is a HP Photosmart C4280, I've used for several years without problem.  I only use text printing and copy functionality.  Have never used scanner or printed photos.

  Of course, I could use help with that.  Thanks in advance.

  Hello

  · Do you remember any changes made on the computer before the show?

  Review of the HP link and check if you have tried all the steps that they suggested to solve the problem below: HP Photosmart series all-in-one printers (C4200 and C4300)-"Incompatible cartridge" or "print cartridge is missing, improperly installed, or not intended for your device" Message is displayed on the computer: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=3221640&prodTypeId=18972&prodSeriesId=3221640&objectID=c01530839

  If you have already tried all the steps, but still the problem persists then I suggest you contact HP support for assistance. Link, you can check: http://welcome.hp.com/country/us/en/wwcontact_us.html

• My system is unable to detect the hard drive.

  Original title: HDD not detectable

  Well, I l turned off my computer laptop and then heard some bad news, then I hit on the left side of it, angry and then he had a problem so I checked the BIOS and discovered that the disc HARD was undetectable and so now my laptop no longer starts. Here is a picture of what is shown on the screen

  Hi Robert,.

  Please contact Microsoft Community.

  I'm sorry to know that you are unable to boot your system as the hard drive is undetectable. I suggest you contact the manufacturer of your Dell system for additional help on this problem. As they should perhaps update your BIOS or make some changes in the settings.

  Reference: http://www.Dell.com/support/contents/us/en/19/category/contact-information/technical-support?c=us&l=en&s=DHS&CS=19

  Hope this information helps. Please do not hesitate to contact us if you are having trouble using your Windows.

  Thank you.

• Debian 5.0 kvm image for vmware «unable to detect disks or volumes...» »

  Hi all

  I'm trying to convert a KVM node running Debian 5.0 to a vmdk image.

  When I do this, Linux (4.0.1) or Windows (4.3), I get the following error:

  Cannot detect disks or volumes on the source machine. Please ensure that the source is a Linux Distribution supported

  I have attached the logs complete, but here is the output of a few orders and relevant newspapers.  I hope someone can help me.

  Thanks for any help that you could provide!

  # df h

  Size of filesystem used Avail use % mounted on
  / dev/vda1 4.7 G 2.9 G 1.6 G 66%.
  tmpfs/lib/init/rw 0% of 250 M 250M 0
  udev 10M 608K 9.5 M 6% / dev
  tmpfs 250M 250M 0 0% / dev/shm
  # mount
  vda1/dev/on / type ext3 (rw, errors = remount-ro)
  tmpfs on/lib/init/rw type tmpfs (rw, nosuid, mode = 0755)
  proc on/proc type proc (rw, noexec, nosuid, nodev)
  Sysfs on/sys type sysfs (rw, noexec, nosuid, nodev)
  procbususb on/proc/bus/usb type usbfs (rw)
  udev on/dev type tmpfs (rw, mode = 0755)
  tmpfs on/dev/SHM type tmpfs (rw, nosuid, nodev)
  type devpts on/dev/pts devpts (rw, noexec, nosuid, gid = 5, mode = 620)
  # ls-l/dev/vd *.
  BRW - rw - 1 root disk 254, 0 on 12-03 - 2011 00:22 / dev/vda
  BRW - rw - 1 root disk 254, 1 2011-03-12 00:23 / dev/vda1
  BRW - rw - 1 root disk 254, 2 12-03 - 2011 00:22 / dev/vda2
  BRW - rw - 1 root disk 254, 5 12-03 - 2011 00:22 / dev/vda5
  BRW - rw - 1 root disk 254, 16 on 13-03 - 2011 12:13 / dev/vdb
  BRW - rw - 1 root disk 254: 17 on 13-03 - 2011 12:14 / dev/vdb1

  # fdisk-l

  Disk/dev/vda: 5368 MB, 5368709120 bytes

  255 heads, 63 sectors/track, 652 cylinders

  Units = cylinders of 16065 * 512 = 8225280 bytes

  Disk identifier: 0x00072c02

  Device boot start end blocks Id system

  / dev/vda1 * 1 617 4956021 83 Linux

  / dev/vda2 618 652 281137 + 5 extended

  / dev/vda5 618 652 281106 82 Linux swap / Solaris

  Disk/dev/vdb: 1073 MB, 1073741824 bytes

  16 heads, 63 sectors/track, cylinders of 2080

  Units = cylinders of 1008 * 512 = 516096 bytes

  Disk identifier: 0xb30fe87f

  Device boot start end blocks Id system

  / dev/vdb1 2080 1 1048288 + 82 Linux swap / Solaris

  # cat/etc/fstab

  # / etc/fstab: static file system information.

  #

  # < file system > < mount point > < type > < options > < body > < pass >

  proc/proc proc defaults 0 0

  / dev/vda1 / ext3 errors = remount-ro 0 1

  / dev/vda5 none swap sw 0 0

  / dev/hdc/media/cdrom0 udf, iso9660 user, noauto 0 0

  The corresponding section:

  [#4] [2011-04-15 21:47:14.977 F079AB70 error 'App'] Caught by converter Agent SysinfoQuery log file; result: [2011-04-15 21:47:26, 446 INFO storage]: probe for disks using parted

  [#4] [2011-04-15 21:47:26, 446 INFO storage]: Parted device returned with path: / dev/vda, type: 0

  [#4] [2011-04-15 21:47:26, 446 INFO storage]: device not supported by path to jump: / dev/vda, type: 0

  [#4] [2011-04-15 21:47:26, 446 INFO storage]: Parted device returned with path: / dev/vdb, type: 0

  [#4] [2011-04-15 21:47:26, 446 INFO storage]: device not supported by path to jump: / dev/vdb, type: 0

  [#4] [2011-04-15 21:47:26, 446 ERROR storage]:!

  [#4] [2011-04-15 21:47:26, 446 ERROR storage]:! Could not recognize any disks!

  [#4] [2011-04-15 21:47:26, 446 ERROR storage]:!

  [#4] [2011-04-15 21:47:26, 446 WARN storage]: unable to execute lvm commands, none of the groups of LVM volumes or logical volumes will be detected

  [#4] [2011-04-15 21:47:26, 446 INFO storage]: Got to climb the table entry: fsname: / dev/vda1, dir: /, type: ext3

  [#4] [2011-04-15 21:47:26, 446 INFO storage]: device with 254 major and minor search 1

  [#4] [2011-04-15 21:47:26, 446 INFO storage]: Got to climb the table entry: fsname: tmpfs, dir: / lib/init/rw, type: tmpfs

  [#4] [2011-04-15 21:47:26, 446 INFO storage]: Got to climb the table entry: fsname: proc, dir: / proc, type: proc

  [#4] [2011-04-15 21:47:26, 446 INFO storage]: Got to climb the table entry: fsname: sysfs, dir: / sys, type: sysfs

  [#4] [2011-04-15 21:47:26, 446 INFO storage]: Got to climb the table entry: fsname: procbususb, dir: / proc/bus/usb, type: usbfs

  [#4] [2011-04-15 21:47:26, 446 INFO storage]: Got to climb the table entry: fsname: udev, dir: / dev, type: tmpfs

  [#4] [2011-04-15 21:47:26, 446 INFO storage]: Got to climb the table entry: fsname: tmpfs, dir: / dev/shm, type: tmpfs

  [#4] [2011-04-15 21:47:26, 446 INFO storage]: Got to climb the table entry: fsname: devpts, dir: / dev/pts, type: devpts

  [#4] [2011-04-15 21:47:26, 446 INFO storage]: statistics for swap device/dev/vda5

  [#4] [2011-04-15 21:47:26, 446 INFO storage]: Swap device/dev/vda5 has the device of block (major, minor) number: (254,5)

  [#4] [2011-04-15 21:47:26, 446 INFO storage]: statistics for swap device/dev/vdb1

  [#4] [2011-04-15 21:47:26, 446 INFO storage]: Swap device/dev/vdb1 has the device of block (major, minor) number: (254,17)

  [#4] [2011-04-15 21:47:26, 446 ERROR storage]:!

  [#4] [2011-04-15 21:47:26, 446 ERROR storage]:! Could not recognize all volumes!

  [#4] [2011-04-15 21:47:26, 446 ERROR storage]:!

  [#4] [2011-04-15 21:47:26, 446 ERROR storage]: could not find a startup directory (searched "/ boot"); the final system may not be bootable

  I doubt that Converter knows what are virtuio block devices.
  I guess I would install a new virtual machine from scratch and just move the data