WTM

Similar Questions

• FieldPoint not production form wavelength or data collection properly

  Hello

  I just got a few thermcouples hung in my box of Fieldpoint so that I can start my troubleshooting program. Right now with how I wired things I want that file .lvm to collect a point of data by one second. For this reason, I put a delay of a second on the ground. For some reason any when I linked the fieldpoint, no data shows up on the waveform. Temperature is very good reading in MAX. There is also a loop to stop if it reaches the maximum value specified in the loop. Not only that, but the data is produced when it exceeds this ceiling, but just a point at the point where it stops... say yes it works for 6.5 seconds and exceeds the max, this is the maximum temperature at this time. In my view, that it will collect all of a second according to the needs.

  Please see the code and help.

  Thank you very much

  Tanya

  resolved, my WTM was outside of the loop as well as recording when the loop is complete. I still have trouble getting the data every second and created another post that I felt that it was lost

• error message "Windows Explorer has encountered a problem and needs to close" on click with the right button in my computer

  I had this problem for awhile now.  After I receive and send the error report my computer is blocked and I have to finish by WTM. I tried to start in safe mode and it was ok there and when I restarted in normal mode it was ok for the rest of the day, but when I put the computer today the problem reappeared. Dr. Watson is also sometimes with an error message.

  I am running XP with MS and updates.

  Would appreciate some advice.

  Chris

  When the Windows Explorer (not Internet Explorer) is wrong (especially when right click), begin to suspect third-party add-ons explore extension.

  Those who would be the Explorer extensions that do not belong to Microsoft.  This means that extensions that you have added.  Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added without your knowledge when you install the new software.

  Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (like the scan of this file, open that file, play this song...).

  If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected.  If you can get there when you want it, make an adjustment and then there is no message the next time you don't do anything, you do, you have found and corrected.

  First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem.  You can have a lot of extensions not installed Microsoft don't even know you about.

  Download ShellExView here to see what Explorer extensions you have loaded:

  http://www.NirSoft.NET/utils/shexview.html

  ShellExView does not install anything on your computer, simply of runs and displays.

  After launching ShellExView, under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems which is a difficult color to see, so click on display, choose the columns and move the column Microsoft closer to the top, so you can see on your screen without having to scroll left and right.

  Click on the column header for Microsoft sort display (by clicking on the column of Microsoft) then all the non Microsoft extensions are on top and easy to see.

  Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

  You can also Google the name of a suspect add-on and see if there is any success on the mistakes of the DEP and what other people have done about it.
  You can Google something like:

  Explorer XP crashing (you must fill in the name of add your suspect on.)

  See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

  I'm not a defender of trial and error, but I can't think of another way to do...

  Right click and disable the non Microsoft extensions one at a time (or maybe in groups of 3-5 at a time), keep a list, so you can enable them again later if you wish. The result of the change is immediate and no reboot is necessary.  Test your failure condition.  If the Explorer starts to behave, you will know that an extension of this group of 3-5 is the culprit in order to start to enable them one by one until the Explorer fails again.

  If you recognize all the extensions that have been added or recently downloaded, start with these first.

  Don't forget - disabling the extension does not uninstall the extension - it is just disabled so you can always turn it on again.  In this way, you can switch back and forth, enabled to be sure, you have the right extension under control.

  Disable them one at a time until your right click on do not generate an error, then restart and test again to make sure the changes 'stick '.  You have disabled the last extension would be suspicious.

  You can also just disable all non-Microsoft extensions, restart and allow them one at a time until you find the one that generates the condition.

  If you have a large number of extensions, you can disable them is small groups, 3-5 at a time instead of 1 at a time until your system starts to behave.  When it does not, you will know that the problem is one of the extensions of this small group and you can enable members of the Group at a time until the problem returns, then the problem is with the last extension that you enabled.

  The hope is that you will find an extension that caused the error, and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.

  I have not your problem, but I can when you toggle extensions, the extension is immediately disabled, so disable an extension does not seem to require a restart, but if you think that you have found the problem, I reboot and repeat the test in any case to be sure the problem disappeared.

  If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.

  If you find the offending extension that's the problem, please let us know what it is that I can add to my list.

• Photoshop CC 2014 will not start, but I see Photoshop.exe running in the Task Manager!

  I've just updated Photoshop CC 2014 today - October 6, 2014, and it does not start. I don't give warnings or errors. Windows 7 Pro. If I check the Windows Task Manager, I see Photoshop.exe running, but it never open on my desk.

  Just for anyone who believes he knows the sequence of events:

  1. I've updated Photoshop CC 2014 and many other updates CC today
  2. I rebooted my machine (Windows 7 Pro)
  3. Icon clicked on start Photoshop
  4. Photoshop is not started, but Photoshop.exe appears in Windows Task Manager (RTM) tab process (about 8 MB of memory used)
  5. If I click on Photoshop icon to start several times, many EXEs appear in WTM
  6. Tried right click on Photoshop.exe (s) and ending the process, and then run Photoshop (same result) again
  7. Rebooted my machine a second time
  8. 2014 CC Photoshop works now

  I'll add an update here, if things change.

  Thanks for the help everyone!

• Create a worker in the flash IDE?

  I'm trying to generate a swf of Flash CC worker.

  When I try to compile using AIR 13 for android:

  var wtm:MessageChannel = Worker.current.getSharedProperty ("wtm");

  WTM. Send ('test');

  Runtime::ContentPlayer/loadInitialContent()

  Runtime::ContentPlayer/playRawContent()

  Runtime::ContentPlayer/playContent()

  Runtime::AppRunner/run()

  to ADLAppEntry / run)

  overall / runtime::ADLEntry()

  Is it possible to publish a SWF of worker of the IDE?

  This guy here (make sure that the name is correct):

  

  In your way of Flash CC\Players\Debug crush FlashPlayerDebugger.exe. This is what is used when you press CTRL + SHIFT + ENTER.

  Plugins and ActiveX controls are special Flash Player plugins for browsers that crash the base for you plugin allow to debug a web project (SWF embedded in HTML). It's totally different.

  Edit:

  Updated my own just for posterity. Avion13 and FP13... And it displays correct:

  FP:

  

  AIR TRANSPORT:

  

• CS5-> CS6 upgrade hangs, block the windows Task Manager, does nothing else

  Got the CS6 Design Standard update, hoping to upgrade from CS5 Design Premium. Could it be the problem? I don't have all the added bonus and this stuff is ridiculously expensive.

  In any case, I put the disc, nothing happens. I run the set - up.exe, the disc spins, then nothing continues to happen. I watched it for up to 5 minutes and nothing.

  Set - up.exe isn't in Applications, but it's in the process in windows Task Manager. However, there is no real activity at all. When I try to end the process, WTM crashes. I have to every hard reboot or eject the disc in order to recover.

  What gives? I can post PDApp.log if need be, but I don't know how much help it will be.

  W7 Pro 64-bit

  So it turns out that it was the reader. I installed an internal DVD SATA drive and it ran the update without fault. Just in case someone else stumbles across this post with a similar problem, make sure that you do not install the update of an external USB DVD drive, specifically a Samsung SE-S084. It won't work.

  Thanks for the help guys!

  J

• calculation of totals: if, else statements

  OK, I have a form with 7 fields called receipt1 by the receipt7. I'm also a total field called reimbursementTotal.

  I need a script to add all the fields of reception to the top and if the total is less than or equal to $150, enhance the reimbursementTotal of the total field, otherwise give the reimbursementTotal a value of $150.

  I'm not very versed in Adobe Scripting, some help would be appreciated.

  Thank you

  WTM

  Try following the calculation script customized for the text reimbursementTotal field:

  Custom calculation script

  (function () {}

  To calculate the total

  var total = 0;

  for (var i = 1, I< 8,="" i++)="">

  Total += + getField("receipt"_+_i).value;

  }

  Set this field value based on the total

  Event.Value = (total > 150)? 150: total;

  })();