X220T wireless after reinstall Win 7

Similar Questions

• Hard drive not showing do not full capacity after reinstalling win 7

  I just reinstalled windows 7 and have just noticed that my hard drive I do not show full capacity. After installation, it is show that C & D drives with Windows installed on D. When I tried to copy my music from my backup library he said that there was not enough memory. SRE enough checking properties of the drive see drive capacity C 97.6 GB and D as 12.1 GB drive. The hard drive is supposed to be a terrabyte and it was OK was before I reinstalled Win 7...

  Hi Mick,

  You can expand the C partition in "unallocated space" as follows.

  Once more, hold down the Windows key and press R.  In the run box, type compmgmt.msc , and then press ENTER.  Click disk management in the left pane and let readers load upward.

  In the lower graphic view of the partitions, right-click on the C partition and select "Extend Volume".

  In the next window, click Next.

  In the next window, use the "select the amount of space in MB" make sure it shows the same number as the number of 'Space available Maximum in MB' which is registered just above (adjust if necessary).

  Click Next, then click Finish.

  It may take a few minutes to complete.

  Kind regards

  DP - K

• How can I restore my icons on the desktop to backup files after reinstalling Win 7 Home?

  HD failure forced me to reinstall my Win 7 home page.  Fortunately, I was able to save before total chaos ensued.  (My set of files has been relatively low, so I did a copy/paste of my drive c: \.)  How can I restore my desktop icons in the backup files?

  Hi pb1313,

  Thanks for posting in the Microsoft Community. It seems that you try to restore the backup after reinstalling Windows 7.

  As you have copy and pasted the c drive visit this link if you want to manually transfer files ignore the title and see the steps mentioned in this link and check:

  How to restore a Windows 7 computer to a previous Windows installation by using the Windows.old folder

  http://support.Microsoft.com/kb/971760

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

• Impossible to printer via wireless after reinstalling Vista

  original title: I had to reinstal vista home Prem I have now can print wireless test pages but can't print other documents

  the same as the title

  Hello

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Bluetooth not working not not after reinstalling Win XP - Satellite A100-712

  Hello

  I have a problem with my Satellite A100-712. He took BT BT worked perfectly before reinstalling windows. I reinstalled windows using the original Toshiba Recovery CD. After you have reinstalled, BT is no longer working. Monitor of BT icon does not appear. When I swicht BT on (Fn + F8 or "manual switch on the lid of the laptop) it starts installing bluetooth. But the installation progress bar stops at some point and that's all. I tried waiting etc, but nothing helped.
  You can only cancel the instalation.

  I tried several versions of BT software, but even with the original - provided on the recovery CD, it doesn't. I am attaching the screenshot. As far as I know, the problem is quite common, but I have found no satisfactory solution...

  I hope you can help me with this!

  [http://www.quickphotohost.com/uploads/8f0614e068.jpg]

  Kind regards

  Jajoos

  p. s.

  the screenshot says: installation of the BT device. Please wait...

  Hello

  You are right. The A100-712 supports Bluetooth without a doubt.
  Then you should be able to install the BT stack correctly.

  As mentioned; BT can be activated properly using FN + F8 and installation starts as well, but he does not terminate
  Hmm I'm not quite sure what could cause this but maybe his problem of m system software.
  I think it is to recover the laptop once more
  Activate BT, then check if the progress bar would begin and could complete the installation.

• Satellite L450D - 11G - no internet connection after reinstalling Win 7

  I just installed win 7 pro 64-bit so I can increase the RAM up.
  Initially I had win 7 Home premium SP1.

  I have a Toshiba satellite L450D - 11G PSLY5E.
  I downloaded all the drivers from Toshiba on a memory stick from a source different and then installed on the Toshiba.

  Then, I opened all the drivers one by one and ran each driver individually.
  In Device manager there is a yellow exclamation next to the network controller.

  I have a home network setup that I can connect to the net using phones, tablets and other portable computers.
  The icon on the laptop says NO CONNECTION, NOT of CONNECTIONS AVAILABLE.

  Y at - it a special order to install the drivers. I have install in the order in which they were downloaded.

  Any ideas anyone. TA

  In Device manager there is a yellow exclamation next to the network controller.

  Probably the essential WLan/LAN drivers are not installed properly.
  Do you have problems with the internet connection using WLAN and LAN?

  I recommend you to check if the correct drivers have been installed.

  The wireless network card should be Realtek RTL8191SE 802.11bgn

  Built in LAN module is published also by Realtek...

  so in both cases you need a Realtek drivers

• USB does not work after reinstalling Win XP Pro on P10 - 504

  Hi all

  I have problems with my computer laptop satellite P10 504 series, I recently had to reinstall windows xp professional on my laptop, and since I had no usb recognision.

  all devices (disks to flash memory, wireless usb devices) all show the power on the power light, but windows does not detect the new hardware, I reinstalled now twice thinking it was a faulty installation but not luck...

  OS: XP Professional SP2

  I have no recovery / tools and utilities cd since they disappeared, downloaded all the drivers from the toshiba website, even tried using the latest chipset drivers intel on the NET, but none seems not to work...

  Help, please

  any help is always appreciated

  Thanks in advance
  Rob

  Hello

  I think only 2 possibilities:
  1. the USB driver is missing on the download page. Then, you should contact Toshiba service.
  2. I found a Quick Fix Engineering Q822603 for USB drivers. Maybe by installing this will help.

  I'm sorry that I don't have a better idea.

  Good bye

• Libretto W100 Bios + some drivers do not work after reinstalling Win 7

  I bought the w100 and I love the thing to death.
  Had no problems with it until Saturday, to make a long story short, I reinstalled win7 on it, the wrench was found under the battery.

  Win7 installed ok, but I had a few problems with the software booklet *. Firstly the bios has been 'not supported', as was the PC health monitor.
  I finished installing anyway, and most importantly, it seems to work. A bit slower than before, I'm guessing because of the bios.

  It's the same material, nothing has been changed, even the same win7 (Home premium), so I wonder what I did wrong here.

  I tried to reinstall three times and no luck.

  Oh, and I just noticed that the "auto rotation" is not no longer works.

  If anyone has had similar problems, and you have a solution?

  * All booklet drivers have been downloaded here:
  http://at.computers.Toshiba-Europe.com/innovation/JSP/supportMyProduct.do?service=at (I used my series to find the correct drivers)

  Hello

  You have reinstalled Windows 7 on a normal Microsoft Windows disk?
  May I ask why you do not use the Toshiba recovery media?

  With respect to the rotation of the display, I started another thread that may be useful for you :)
  http://forums.computers.Toshiba-euro...ThreadId=57977

• Qosmio X 770 - 11 c - some things do not work after reinstalling Win 7

  I just had windows reinstalled to correct some problems with the connection to a MAC mini server.
  But some things do not work as before:

  The USB 3.0 port does not work.

  FN key does not work (if you press FN and Z I used to get a toolbar at the top and then be able to change the lighting of the keypad)

  Toshiba Eco isn't here

  ETC., essentially all the toshiba Add ons/programs delivered pre-installed.
  I need to intall all drivers and is at - it somewhere I can get them all in?

  Thank you very much

  All Toshiba drivers can be downloaded from the Toshiba UE driver page:
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp?

  You will find common Toshiba drivers and all the special tools and utility that must be installed to get all the extra features portable works correctly.

• After reinstalling Win 7 activation

  I recently updated my motherboard and processor, and everything seems to work fine, until Windows failed to start correctly. I restored the computer to the factory, which was provided to me by some HP software. It was about a month ago. Now I'm told by Microsoft/Windows that my copy of Win7 is not valid, but there is no mention of this when I had finished restoring windows default HP. Is that what I can do, not buy Win7?

  Thank you

  Matthew

  Hello

  Please call Microsoft and explain the situation, they will sort this out for you:

  http://Windows.Microsoft.com/en-AU/Windows7/activate-Windows-7-on-this-computer

  Kind regards.

• I reinstalled win xp on my laptop but impossible to reinstall my printer samsung clp-320 wireless. help please

  I reinstalled win xp on my laptop but impossible to reinstall my printer samsung clp-320 wireless. help please

  Hello

  Thanks for posting this question in the Microsoft Community.

  To provide a proper resolution, I would need more information on your side.

  1. What is the error you get when trying to install the printer?

  2. after the installation of Windows XP, you have installed all necessary drivers?

  3. have you updated to Service Pack 3 installed?

  Please provide us with more information to continue troubleshooting as a result.

  Alternatively, you can also post this question to the Samsung support community: http://www.samsung.com/uk/support/model/CLP-320/SEE

  You can check this article to see if this help.

  Solve printer problems: http://windows.microsoft.com/en-in/windows/printer-problems-in-windows-help#fix-printer-problems=windows-xp&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Thank you.

• HP Probook s 4440: lost after reformatting computer network adapter and reinstall Win 7Home Premium 64-bit

  My laptop, HP Probook s 4440, had software spyware and after several attempts to remove it through 2 different software anti virus, I reformatted the hard drive and reinstalled Win 7 Home Premium 64 bit from the Windows CD.

  Now, my laptop cannot see all available networks regardless of if I plug or try wireless.  The network and sharing Center shows nothing to activate when I go in the settings of the card.  Network discovery is turned on.

  In Device Manager, the hardware for the network controller ID are:

  PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C & REV_00
  PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C
  PCI\VEN_1814 & DEV_539A & CC_028000
  PCI\VEN_1814 & DEV_539A & CC_0280

  Can you help me please?

  Hello:

  You need this card wireless driver...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_119873_1

• Envy h8: after Windows 10 reset impossible to reinstall win tv software

  I upgraded to windows 10 8.1 all on time and everything seemed fine. Then last week I found that several functions do not work on the PC. As Start button, Windows Store, some of the apps etc etc. Is not too worried but thought I'd reset after having read about it on the Microsoft Web site. Followed the instructions and kept my files but when the PC has finiished I found that all who have been with the PC or software I had installed had disappeared.

  I've always had the installation disks for the software I have installed, but couldn't know how resinstall the software preinstalled, when I bought the PC. Most of it I don't mind, but I would really like to reinstall Win Tv7.

  I remember vaguely seeing awhile back on the resettlement of the recovery partition software but can't seem to do it now and the HP website has only an update for Win TV for windows 8.

  Anyone got any ideas please?

  Gordonmac8

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post about the problems with Win TV and wanted to help - but we need more information.

  We need the details of your PC product number.  There should be a sticker with this information on the case.

  There is more than one model of your laptop, and we need the specific model number to search for information on this subject.

  I personally found the updates of Win10 to be a mixed bag - a work very well, plus have problems, some fail miserably!

  The only way to reinstall the HP software that is preinstalled on the PC is to use something known as HP recovery media.  It is a set of DVD and a CD or a USB key, which will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP. In some cases, you will be able to order a USB instead of discs.  You must order at HP; they cannot be downloaded.

  If you are interested in this approach, then let me know - and I'll see if the recovery media is available by using the product number of details of your PC.

  As for versions of the software, unless the PC is delivered with Win10 preinstalled HP, even if there is a version Win10 of the HP software, he has no way to download and install it.  So, you would have the same problem.

  We can proceed once you provide the information.
  
  Thank you

• Need to reinstall win 8.1 after a disk crash

  After an accident, I need tot reinstall win 8.1. There is no disc supplied with my XPS 8500.

  If I want to download the software preinstalled on Dell support website, it seems that there is nothing happening.

  On my Dell there is also a kind of key OEM product so I can not use any other disk install...

  What can I do? Thanks for a response.

  You must use the generic key if the system came with Windows 8.0 and install with Windows 8.1 due to the poor design of Microsoft. For a system that came with Windows 8.1 your BIOS SLP key is automatically entered with 8.1 Windows media.

  The brackets must be bootable.

• DM4-2165dx: good day. I want to reinstall win 7, the slower after 5 years.

  I would like to reinstall win 7 64 bit on my pavilion laptop, without losing my license key.

  [Personal information deleted] is the serial number of my laptop.

  I bought the laptop in us, 14/01/2012, Charleston and I still have the original receipt on me. I live in Hungary.

  I want to get the right to reinstall the way for my win 7 Home premium oa.

  I contacted directly to microsoft technical support and they sent me this House Home premium English sp1 x 64 iso and me says to contact HP, because I have to make sure that Hp supports the reinstall, I need to know, how many times can I reinstall my OS, because it may be limited by HP.

  I also have a plan to replace my hard drive soon, to avoid the old hdd to cause problems of its natural damping.

  More information: I couldn't save the laptop, I bought a year before the years chooseable available on the page of the commercial register,

  so

  I could not contact with chat support,

  That is why I take the issue here.

  I could not redeem the media Support HP - order software support and pilot here, that address different purchase and delivery can be a problem, I think.

  That I bought the laptop in the United States, but live in Hungary, I do not want to have problems with product registration home address, address of purchase and etc...

  It would be great to download the iso right from a link, if I was able to reinstall the operating system, without waiting for the drive.

  Or if the iso of windows provided by windows 7 is good, and I will not lose my windows license, it is also a good option.

  Or anything else that can do the reinstall on the right track.

  Hello

  Thanks for posting in the HP Support forum. Welcome aboard!

  I just checked and it works - you can purchase media recovery using the following URL from here > > http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-dm4-Entertainment-Notebook-PC-series/5145680/model/5171100

  Price is 25 USD - 3 DVDs but the questions is that the system provides only U.S. addresses shipping. Since you're outside the States, this could be a problem.

  I also checked that it is available on a 3rd party site that might be able to ship outside of the U.S.. > > http://www.computersurgeons.com/p-22105-windows-7-64b-recovery-kit-669481-001-for-hp-pavilion-entertainment-notebook-pc-model-number-dm4-2165dx.aspx

  If you have HP recovery media, I suggest you contact HP support, explain the situation and see if they can ship the recovery media in the Hungary. You can check with the support of the Hungary > > http://www8.hp.com/hu/hu/contact-hp/phone-assist.html

  Another option that will probably work now on the existing HARD drive:

  Each HP computer that has Windows preinstalled comes with recovery partitions that can be used to reinstall Windows to factory default condition. It's called HP recovery process. If the partitions are still there and intact, they will do the trick for you and you will be able to recover now. Here's how to perform a recovery > > http://support.hp.com/us-en/document/c01867418

  > > http://support.hp.com/us-en/document/c01867418#AbT3

  Essentially - restart the computer and as soon as it starts booting keep hitting the Esc key (such as tap-tap-tap) to access the HP boot menu. Choose F11 - recovery and follow the on-screen instructions.  Backup your data before restoring.

  In case you decide to replace the HARD drive with an SSDor a new one, then you can the previous image player and to transfer the image to the new free software like Clonezilla > > www.clonezilla.org

  Please, let me know how it goes.