XAMPP is replacing the real php as follows:

Similar Questions

• How to replace the real gaps between the waveform with Silence?

  Is there any Automation I can use for this? I tried the diagnosis, but it was not what I was looking for. Toppings of diagnoses, or real breaks removes or gaps, I like to keep the correct gaps, I want to just reduce to silence all at once, with a single command. Help, please!

  There is no way to do this completely automatically. However, there are two ways that might be time saving. Normally, it is easier to do it manually but which may seem tedious. If you assign a shortcut to the command of Silence key, then this is fast enough to get through the file manually mark each region one both and use your shortcut key to shut parts of the selection.

  Another way is to use the Noise Gate or Expander mode Dynamics Processor to automatically reduce the level of any audio below a certain level. Try the Noise Gate > 20dB preset but move the 20dB point to something that is below the level of any speech search.

  Although generally it is clear that sounds a little artificial if you cut all the gaps completely since the human ear is used to hear some background noise during gaps in the speech. Usually, the best way is to find a fairly quiet background piece and which allows to replace unwanted sounds in the interstices.

• XP Home OEM locked fixation after replacing the motherboard

  I am repairing a HP Pavilion with XP home SP3 locked to the motherboard fried as a favor to a friend.  My friend insists on XP and wants / needs to preserve installed programs & data on the disk (which is always good when tested elsewhere).  He has some company reprogramming s/w radio, which only works on XP.  We know that it will buy a commercial version.  I can't find what really works, said http://support.microsoft.com/kb/292607 that it can be upgraded to XP Pro (that he would) but which covers only SP1.  My proposed seller says House cannot be upgraded to Pro without a complete reinstallation and did not oem home home retail.  XP Mode under W7 pro is not an option, if the serial port-> time of radio is not quite right, expensive business radios becomes expensive bricks and it will not run the risk as it will be with XP on new MB/CPU.  There current image backups, but they are always blocked, of course.  The drive passes the test of the provider (in another machine, of course).

  Can XP Home SP3 OEM evolve into XP Pro SP3 without a reinstall (i.e. reformatting & install)?  Can XP Home SP3 OEM be 'upgraded' to XP Home SP3 detail without having to reinstall?  Is there a better way (with XP) to solve this problem?

  Thank you!

  Final result: after the installation of the new motherboard, the installation of XP Pro SP3 retail disc does not recognize the installed XP home SP3, said that he was not an operating system on the partition and did not offer an option to upgrade.  The software provider was right, and the article cited above wrong, at least for SP3-> SP3 on this particular configuration.

  Then, I started from the original hard disk and attempted an activation of the phone, which didn't.  The robovoice said of trying to update the license key, that I made using one on the COA, then try activation phone even once.

  It worked.  There are more drivers to dl and install, but the box still works with a new MB and dual core CPU without a reinstall or OS update.

  So despite all the stories about tattooed motherboards and cannot reactivate XP if they are replaced, the real recovery was relatively simple.

• Are you looking for my action of the default (.php) for .asp form (or other extensions)

  Hi all

  MY site is currently using asp pages, and we redraw with muse.  Unfortunately, I get an error when you replace the generated .php, with my own pages .asp page.

  I'm talking with the cat, and really couldn't help me because it is not a "supported workflow" as in "'we encourage our users to modify the html code generated," and sent me here "

  I would like to know if someone has tried to change their extensions and managed?

  I see Personalization Web Forms .aspx pages are used here, but the cat, it's because of "Business Catalyst not supporting php," while the third party sites use php, aspx hosting their own uses.

  I would be grateful person entered it, due to complications related to the use of PHP on my server that I really want to make my own pages of work if possible.  In the opposite case. ASP, does anyone have experience change default value in general?

  If additional information is needed I'll go there, I'm the man in the middle in it so I appreciate your time and patience.

  Thank you very much!
  

  Post edited by: Abhishek Maurya - removed extra line breaks

  Hi Konrad,.

  Yes, you can use URLs to custom action and replace the one that is generated through Muse. When you generate the HTML through Muse, it exports all files php, including the forms submitted to the. So, you can take a look on how the data have been handled and know how to do the same with your asp script customized.

  The name attribute is used to pass variables to the script running on the server. ID is used for the client side JS and CSS.

  Simply change the action url won't. You will first need to know how the Muse scripts process data and then try to do the same thing with your custom script.

  Note: If you change the generated html Muse, then when you post to Muse, next time, it will overwrite your changes. So, you will need to make these changes after each export.

  - Abhishek Maurya

• Firefox will replace wndows, etc, etc.? And the real operating system?

  I keep seeing Firefox OS for desktop of android and so forth, as well. Will it be a real operating system that could replace the windows and so on of the OS. I want to be clear with this problem.

  Hi Briguy, no bones of firefox will not be a replacement for the Office of the operating systems like windows at the moment. However, since it is open source, people are free to hack on it and try to get firefox os running for all kinds of platforms - there are projects he works for devices like the pi raspberry for example: https://wiki.mozilla.org/Fxos_on_RaspberryPi

• HP Pavilion 14-b017cl: follow-up on creating and using the USB key recovery to win 8 after replacing the bad hard drive

  I have 2 hp pavillion sleekbook model 14-b017cl'. I replaced the hard drive in my son after that she doesn't have the "optimized hard drive dst test '. I used my sleekbook work to create a USB stick recovery. I followed the instructions to use the recovery to Win 8 usb drive. When I started the laptop of my son, with the USB stick inserted, I got this message.

  PXE - m0f: exit pxe rom

  no bootable device-insert bootdisk and press a key

  Flash player Flash when I put under tension. I rebooted, you press F2, conducted an audit on the new hard drive, happened.

  Later, I inserted the recovery key in my laptop (that I used to create it) and it would not initialize to top. I checked the content to the flash drive and they seemed "Chargers", so it seems to be what I expected. It seems that the recovery USB STICK will not work if my own laptop dies. What I have to buy the HP flash drive, or I'm doing something wrong.

  Hi @gretschman7,

  Thank you for your query.

  I understand you are trying to perform a recovery from a USB flash drive, but you get the error "pxe - m0f: exit pxe rom.

  "no bootable device-insert bootdisk and press any".  You check the recovery media on your laptop as it is the same model and it seems fine.

  Looks like you may need to change the boot sequence. Here is a link to HP - performing a recovery system (Windows 8) HP computers that will help you.   Here is a link to a YouTube video which can also help:.  Performing a recovery of HP system on a laptop HP with Windows 8.

  Please let me know the results.

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as you. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts please click the Thumbs Up below.

• PHP - replace the slash (/) with hyphen (-)

  I started to replace the spaces, special characters, etc. with dashes. However, I can't find the proper way to replace a slash with a dash. I looked everywhere on the internet, some people, which suggests using the .htaccess file but I do not think that that suits my purpose. My code so far:

  Example: You have 1 new message (07/12/2016)

  I want to be: you-ve-got-1-new-message-12-07-2016

  <? PHP

  $message_original is $row_message ['title'];.

  $message_lower = strtolower ($message_original);

  $message_alpha = preg_replace ("/ [^ a - z0 - 9_\s-] /", "", $message_lower);

  $message_dash = preg_replace ("/ [\s-] + /","", $message_alpha ");

  $message = preg_replace ("/ [\s_] /", "-", $message_dash);

  ? >

  $string = "you have 1 new message------$! (12-07 - 2016) « ;

  $filtered = strtolower (preg_replace ('/ [\W\s\/] + / ', '-', $string));

  echo $filtered;  you-ve-Got-1-New-message-12-07-2016

  You can do it with the above simplified code. The regular expression "/ [\W\s\/] + / ' is a model group that contains three metacharacters:

  • \W matches any character that is not alphanumeric or underscore line (this is the same as [^ A-Za-z0-9_]).
  • \s matches any white space character.
  • ------/ corresponds to a forward slash.

• Restrict the search and replacement of real pages

  I try to limit a "find and replace" to the real page, I work in my javascript.

  Is it possible and how can it be done?

  Thank you!

  Well, if you have a look at the DOM of InDesign (under the Help menu

  ESTK), you will see that a page has a property called executives from related, which is

  a collection of blocks of text on this page.

  So, to find all the blocks of text on a given page, you should be able to:

  myFinds = myPage.textFrames.everyItem () .findText ();

  Ariel

• What is the real difference between the following procedures?

  What is the real difference between the following procedures in the DBMS_STATS package:
  GATHER_SYSTEM_STATS
  GATHER_DICTIONARY_STATS

  GATHER_SYSTEM_STATS: System statistics to describe the characteristics of the system hardware, such as i/o and CPU performance and utilization of the query optimizer. When choosing an execution plan, the optimizer evaluates necessary IO and CPU resources for each request. Statistics system helps the query optimizer estimate the costs of IO and CPU, allowing the query optimizer to choose a best execution more accurately plan.
  GATHER_DICTIONARY_STATS: Collect statistics for all items in the dictionary.

• HP Pavilion 15-e073ca: 2nd HARD drive cart, replace the optical drive for HP Pavilion e073ca 15 Notebook PC &amp; Windows 10

  Hello!

  I intend to add an SSD in my two years 15-e073ca HP Pavilion Notebook PC. I found some sites that I can remove the optical drive and put a second drive using a caddy adapter in the optical drive Bay. I found that some people on the forum did it successfully, but nothing on my PC model. I want to know if he could work with my product.

  In other words, there is my plan:

  1 remove the real disk HDD hard bay and replace it with the new SSD.

  2. remove the optical drive and replace it with the adapter caddy containing my old HDD.

  3. do a clean install of Windows 10 on the SSD, using a recovery USB stick made with my system Windows 10 real (which has been updated from Windows 8.1).

  I plan to purchase the following parts:

  1 - a HDD / SSD cart adapter for HP Pavilion 15 (model OBHD9-SATA-SATA-BU9), of NewmodeUS (http://www.newmodeus.com/shop/index.php?main_page=product_info&cPath=2_5&products_id=583)

  2 - a SSD 128 GB (article SDSSDHP - 128G), SanDisk (http://www.sandisk.com/products/ssd/sata/ultra-plus/?capacity=128gb)

  I have a few questions before I buy parts:

  1 - the two drives (my old HDD and the new SSD) are recognized by the motherboard / BIOS and the operating system (Windows, 10)? Is there a limit to a unique HARD/SSD disk drive on the computer?

  2 - the height of the SSD is 7mm, and it seems that my old HDD is 9.5 mm in height (model WDC WD10JPVT-60A1YT0). It would cause no problem (I need to add spacers)?

  3 - these parts work together and with my computer (size, compatibility)? You can expect any problems with this upgrade?

  4 - clean install Windows 10 quote, because I intend to install it on a different drive than the one I used to create the key USB recovery flash? I have never done a clean install of Windows before.

  Thanks in advance for your answers.

  Haghe

  Your plan is perfect. The SSD to will of 7 mm that always come back fine it just will be lower in the caddy. The holes and SATA connections are in the same place as a hard drive of 9.5 mm. You can use a spacer (many SSD include one in the box) but not really necessary.

  Installing SSD for Windows 10 the way you expect is not really "own", that he will again introduce files and programs, in my opinion and certainly drivers. Whatever it is, it works perfectly and activates the old installation has been enabled.

  The hard disk in the optical adapter will not be bootable and will transfer the data a bit slower than a drive in the main compartment, but will still be usable for most cases. If you need fast input/output like Photoshop or video editing move the job file to the first SSD. Alternatively, you may wish to consider documents and photos and other migration on the HARD drive to keep the 128 GB SSD to fill. You can right-click on these files and select 'place' and move them. After the back if you need some help with that.

  Enjoy.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Replacing the hard drive HP G62-450SA model / recovery. Windows 7

  Hello

  Last week my laptop started running very slowly, and after a few tests, it seems that the hard drive is on its way.

  I phoned to HP supports, however is out of warranty I wasn't able to get a real support, but advised him to watch the online support pages to back up my files, create a file recovery on a usb device and then it would be as simple as taking on the old hard drive, put in the new, and following the instructions to recover my system and files.

  So after these tips, I've created:

  -A recovery image USB on a Virgin USB key, using the Recovery Manager

  -A backup on an external hard drive using the backup and restore

  -An image of the system by using the backup and restore.

  Then I replaced the hard drive.

  When I turned on the laptop all I get is a black screen that says "no boot device - insert the diskette and press any key".

  I have not all discs. I thought that was the point of creating the recovery image on the USB key? I insert the USB key, and it is not recognized.

  If at this point, I'm stuck. I'm not all boards because HP say they have to charge me.

  Please can anyone here tell me what to do next? What I need to buy recovery discs or is there a way I can install the new hard drive by using the above files?

  Thanks in advance

  Hello

  You are welcome

  Another option, you can try would be to restore the system image you created - you can do the following.

  If you do not, use another PC to create a rescue CD Windows 7.  Download the ISO relevant among the links below.

  Windows 7 32 bit

  Windows 7 64 bit

  You must use an app like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn options) to burn the ISO to a CD - a guide on the use of ImgBurn to write an ISO on a disc is here.

  When creating, type following the ESC key as soon as you start the launch of the laptop Boot Menu, and then insert the rescue CD.  Select boot options (usually f9 ), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

  Connect the drive that contains the system image you have created and then follow method 3 below to reload the image on the new HARD drive.

  http://www.shivaranjan.com/2009/05/21/Windows-7-How-to-restore-Windows-7-partition-or-hard-disk-part...

  Kind regards

  DP - K

• I need to replace the HD on a p7-1206 with a SSD

  I need to replace the hard drive 2 TB system in a p7-1206 Pavilion with a 120 GB SSD. What is the best procedure to transfer the Win 7 OS to much smaller SSD? I created the set of recovery disks. After the start of recovery disks to install the OS on the SSD an error message said that capacity SSD was below the disk original and interrupted the installation process. Do I need a procedure which will reproduce all 4 partitions on the SSD drive in running or some partitions can be ignored?

  Thanks for your help.

  MusicCity wrote:

  ...  Do I need a procedure which will reproduce all 4 partitions on the SSD drive in running or some partitions can be ignored?

  Thanks for your help.

  Hello

  No, it also won't work. I hope that the following tutorial helps:

  http://www.overclockers.com/forums/showthread.php?t=670079

  Kind regards.

• Want 4500 All in 1: replace the cartridge when its brand new

  Replace the black cartridge that came with it initially with a 61 new Staples Black.  Now the display shows "the following ink cartridge needs to be replaced" and there the symbol for black. I've sat down and reinstall the cartridges, cleaned the contacts on the new cartridge (which was probably stupid) but I followed the HP instructions in the manual, cleaned the internal contacts of copper, it turned on and off as described, plugged into a surge protector and not in one, and I still got the same message.  It's not real comforting on the first change of ink.  Now what?

  Welcome to the HP community @45001,

  I saw your post on the ink cartridge error message your craving 4500 poster and wanted to say with my suggestion. I saw that you tried all the troubleshooting steps and because the error has not been erased, I now suggest you contact HP to see on a replacement printer to solve the problem.

  I hope this helps, click on the thumb to below testify of my answer, and then click "Accept as Solution" if I helped you to find a solution to this problem.

  Details of HP:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number are displayed.

• Update of Vista 32 bit does not work after replacing the hard drive

  A month ago the hard drive of my computer (ACER Aspire 6920) had to be replaced. The disk image hard precedent (which includes the c: with Windows Vista Home Premium 32 bit, SP 2 build 6002) has been mirrored to the new hard drive. Everything seemed to work fine until I noticed that I don't have more updates from Microsoft. I tried a manual update and got the message that the update service was not working and I have to restart the computer. However, the Task Manager showed that the update service has been executed. Of course, I rebooted the computer, but nothing has changed.

  I found a whole bunch of recommendations for this issue in this forum, but nothing seems to work:

  • The Microsoft FixIT tool indicates a problem with the update of components, and then said that the problem had been solved successfully. However, the problem is still there and rerun the FixIt tool Gets the same message on a problem (yet) found and fixed.
  • I also stopped the update service, delete all content in Windows/C:\Windows\SoftwareDistribution and restarted the service. without success.
  • I've temporarily disabled my security suite (Eset Smart Security 6) and tried the update. I also have fittings the folder C:\Windows\SoftwareDistribution to the scope of the antivirus, without success. On the old hard drive, I used a different security suite so I thought that maybe the ESET (that I installed everything recently) could be the cause of the problem, but that doesn't seem to be the case.
  • I also followed the instructions provided by Microsoft at http://support.microsoft.com/kb/971058, but again, no change at all. However, it should be noted that registering some DLLs that Microsoft listed does not work (message that the DLL is not found or some server entry point (my translation, I'm using the German UI and don't know English good term; sorry) could not be found.)

  Http://support.microsoft.com/kb/947821 , I found another tool that supposedly can solve some problems of updating; I downloaded the version for Vista 32-bit, but it cannot install it on my computer (error code = 0xc8000247 during installation).

  So I'm really lost now what else to do. I would appreciate any suggestions. Please note that I am not technically very warned :)

  ARG, apologies.

  Was not aware that they had dropped support for Vista... (I myself have 'graduated' Vista earlier)

  The fact that you have not already installed TSRI is exactly your problem.

  Recent hard drives using 'Sectors 4 K', also known as 'Advanced Format Technology'.

  If the installed hard disk driver currently is not compatible with this specification,

  It will result in oddities like the status of the service Windows Update is not recognized correctly.

  Installation TSRI will fix this in most cases.

  Alternatively, if you are using Vista SP1 or later version (or 7 SP1), you can use the real driver.

  Since you are already updated to SP2, we will see if it is a viable solution.

  Go to: start-> Control Panel-> programs-> programs and features

  In the list of installed programs, locate and remove if found.

  -Intel Matrix Storage Manager

  -Intel Turbo Memory

  This should force your computer to go back to the real driver provided by Vista.

• Dell XPS L502x 5 beeps - the real time clock failure

  Hello.

  I had a problem with my grade, first the hard drive was broken and I swapped the hard drive. Now in the new road, it was not possible to restart it. So I did a reset of the BIOS. Now, he is unable to restart and I get 5 beeps - that due to manual means 'Real Time Clock Failure'.

  What is it?? And how to solve?

  Thanks in advance

  Hi Nightyboy,

  5 beep code indicates CMOS battery failure. Try to release the static power and check whether the system works. Follow the steps below.

  Turn off the system; Remove the battery, power adapter and power cable. Press and hold the power button for 30 seconds to drain any power static excesses. In case the problem persists, you may need to replace the CMOS battery, you can refer to the operating manual using the link below to replace the CMOS battery.

  http://Dell.to/1bB9On6

  In this link if please punch in the system service tag or express service code and click on submit. This will help you access the manual page.