Xantrex XDL 35 - 5 p

Similar Questions

• Clear explanation of the name of the channel on IVI Drivers

  Hello

  I'm using Labview 8.0 assessment to write a program which will include a 35 - 5 p Xantrex XDL DC Power Supply to automate a test. It has only one exit.

  I installed the drivers XDL and IVI Compliance Package. However, I'm still struggling with the name of 'channel' on the IVI Drivers.

  Can someone please clearly explain to me what is the name of the channel, why do I need and what I need to put my name to the channel to get my program to work?

  Thank you!

  Yes, I've read this discussion, but it does exactly what a channel name was, as I had an output "channel".

  I went back to my program just to give it a shot, I typed in the name of the channel in a digital 1 and it worked.

  I still don't know what it is, but at least it will communicate now.

• Xantrex HPD for LabVIEW 2009 pilot

  I saw there are other products OR with drivers for Xantrex HPD feeds.

  Someone at - it one that works for LabVIEW 2009 (or earlier)?

  Ok.  I have it.

  HyperTerminal has worked.

  He checked that port settings and command syntax is correct.

  ALL programs in LabVIEW examples do not have the function of VC to food.  When I hard coded the CR function after the order (also preprogrammed) it worked.  Xantrex (now Sorensen) manual do include SOME simple examples - you just know by experience (catch 22) how do.

  Also be noted that we need to send both a voltage and current definition commands because both are zero by default.  (If you send one, nothing SEEMS to happen because the other is 0).  That could also have been included in an example of beginning.

  THANKS for your help!

• Is conditional SQL processing of XDL available data models

  Hello
  
  Is it possible to have a CONDITIONAL STATEMENT in .xml (data model), based on a SQL statement that was going to be executed? Sense, based on a PARAMETER value, only the TWO queries should be run.
  
  Ex: Lets take a system used, or if the report is run
  SUMMARY = > summary query must be executed
  DETAIL = > detailed queries to run.
  
  < IF P_REPORT = SUMMARY >
  < DO >
  -THE QUERY SUMMARY
  < END IF >
  
  < IF P_REPORT = DETAIL >
  < DO >
  -DETAIL QUERY
  < END IF >
  
  Could if it you please let me know the feasibility of this in XML BI. Ask that you please point me to the documentation, if any.
  
  Thank you
  Vijaya

  OK, I withdraw,

  If it is required to be achieved. then that,

  1. you need to add a report parameter values valid as 'SUMMARY' and 'DETAIL '.
  2. you have 2 Add two separate petitions, no need to join them.
  3 just put separate way queries in the data model or concatenated sql same datasource.
  4 each of the query, to equate them with the setting something like
  5 ' SUMMARY' =: PARAM_REPORT_TYPE in the query summary
  6 ' DETAIL' =: PARAM_REPORT_TYPE in the query in detail
  7. in execution, that which, one of the query to execute and extract the data.
  8. Similarly, in the model, you can add the conditional creation of models.

• Battery monitoring software shows 0% of costs - Satellite 1900

  My Satellite 1900 ceased to charge the battery. It works very well on sector and says he is in charge, but when you check the Xantrex battery it says 0% fees. Up to this point, the battery appeared well with use of 1-2 hours to charge.

  Is this a problem with the computer or battery, monitoring software, or the battery would have an instant failure? The computer had not been moved since the office then had not been dropped or hit.

  I put t think there is a problem of battery or material. Looks like that the laptop works properly with the power of the battery.
  Try to access the Toshiba Power Saver and go to the last tab called battery power meter.

  Here, you can click the icon for individual battery for more information. Maybe the setting should be reset only.

• Error 1074135030 and hyper-Terminal failure while communicating with the power supply

  Hello

  I use the serial port to communicate with power XG XG 8-100 (series) by Xantrex (Sorensen).

  I could not find the driver in IDNE, but I found one on the site of the company that is http://www.programmablepower.com/products/XTR/XTR_Downloads.htm , when I run the example that I get the below error:

  Error 1074135030 has occurred to be initialized with Options.vi of DC850W

  Driver status: (Hex 0xBFFA000A) check that the name of the library (C:\DC850W\DC850W_32.dll) and (DC850W) prefix are correct.

  I don't know what the problem is with the name of the library that makes such a problem.

  FYI, I tried to communicate with the device using the hyper terminal, but there is no answer. When I check the MAX, it seems that everything is OK, that the State is: the device works properly!

  Do you have any suggestions for me?

  Any help or suggestions appreciated because I'm messed up with this and I don't know how to go further.

  ELA

  
  

• How can I test my RS 232 port with Hyper terminal?

  Hello

  I have a big problem with the XANXDC driver for xdc Xantrex power supply 30-200 for a few days, I can not connect my food with my program, I choose a VI gave with the driver (getStarted), but there is an error, I would test the RS 232 connection to make sure that all is ok, with a terminal hyper, but I do not know how , I have never done this before...

  Could someone help me please?

  Assuming that your PIN is correct, you will need to replace the cable.

• Acer Liquid E700, automatic Roaming problem, even when roaming on the parameters is not enabled

  Anyone else having an E700 liquid Acer having problems with one of the 3 slots sim making an unwanted automatic ROAMING? For example sometimes in my sim 1 or sim 2 on the home screen, right where the signals of sim card show, theres a 'R' which is displayed automatically for example above my sim network 1, even if in my SETTINGS - MANAGEMENT of SIM - ROAMING-DATA ROAMING (not verified)? The sign 'R' above the ' Networl bars (for the sim 1 or sim 2) sometimes disappear and reappear.»  Any reason, why this happens?

  In addition, in the SETTINGS - SIM MANAGEMENT - DATA-(doit elle être définie "OFF" ou devrais je choisir d'un de mes 2) CONNECTION

  SIM cards?

  Phones my firmware is updated btw. Any help is appreciated guys =)

  1. make the pitchers (e.g. NOVA, ACTION), battery drain more than standard system Launcher / by default?

  No, if the Launcher is well optimized, never used.

  2. use a batery save app? they actually work? I have battery Xantrex GSam, don't know if its really useful, his run in my background btw.

  Never used one.

  3. I have an LCD IPS display, black or dark wallpapers will minimize battery drainiage?

  Yes, but not so much, because I do not think that you will stay on the homepage of 20 to 30 minutes.

  4 Will play a movie 1080 p in a pile of emptying smartphone 720 p faster compare to play just a 720 p movie in a smartphone to display p 729?

  Yes, because you need more CPU/GPU downscaling the original resolution power

• Battery plugged in but no load and battery life which is at 0%, but the battery is 89-90% charged.

  I have a laptop gateway that I bought last year.  It runs Windows Vista Premium (64-bit), and recently it has been send me load/battery indication problems.  The battery becomes a burden, but the battery monitor does not indicate correctly.  I watched it one day and it loaded up to 89-90% and then the battery monitor indicated 0% and not charging.  When I restart the laptop the charge indicates correctly around 89-90% and will show correctly when it is plugged in.  Once he reached 89-90% charge once again it comes back to life 0% battery and plugged in and not charging.  I tried the battery re - learn and when it reaches the level of 89% it stops and shows a surge of battery, but if you restart the pc it will state the cost of 89% and act normal.   I tried the procedure that I saw on this site earlier with the functioning of the battery all the way down and let the pc "die" on its own, but that still does not work.  Is there a problem with the software in the package of windows vista power control?  I saw at least another person having the same problem but have seen no response or resolution for this.  It is not the connection motherboard problem because the thing is load and works normally except when, if you try to load up once he reached that magic level, it indicates a 0% charge and plugged in and not charging.  I have signed up for a profile on this site and have been typing this message with remaining 0% battery Xantrex battery life reading.

  Question resides in the BIOS. I MD26 series laptop Gateway and has been facing the same problem.

  Download the latest BIOS for you series laptop, update your BIOS and you are done. I found the BIOS of my laptop to this place

  http://support.gateway.com/support/drivers/GetFile.asp?ID=24427&DSCR=gateway%20MD24%20and%20MD26%20BIOS%20Version%209A10h%20For%20Windows%20Vista&UID=290186182

  Hope that solves your problem.

  PS: Please download the BIOS that is related to your computer laptop model/series only. I am not responsible for any damage to your motherboard

  -Patricia

  I am what I am...

• GL to AR sql, including details of the transaction

  Hello

  We have just allowing to r12 and I'll have to write a view that can get information from claims which have been validated in GL

  I am using the following query:

  SELECT DISTINCT GJH. JE_HEADER_ID,

  GEORGE. PERIOD_NAME,

  -CTL. LINE_TYPE,

  -CTL. CUSTOMER_TRX_ID,

  -xal.ae_header_id,

  XE. EVENT_ID,

  GJH.NAME HOSTHEADERNAME,

  GEORGE. DESCRIPTION JE_HEADER_DESCRIPTION,

  GEORGE. ACTUAL_FLAG,

  GJL. DESCRIPTION JE_LINE_DESCRIPTION,

  RCT. TRX_DATE,

  XAL. ACCOUNTED_CR ACC_CR,

  XAL. ACCOUNTED_DR ACC_DR,

  GJL. JE_LINE_NUM,

  GEORGE. JE_CATEGORY,

  GEORGE. JE_SOURCE,

  PARTY. PARTY_NAME GONE,

  RCT. TRX_NUMBER TRX_NUM,

  CTL. DESCRIPTION INV_LINE_DESC,

  RCT.COMMENTS INV_COMMENTS,

  'AR' TRX_TYPE,

  GJL. STATUS,

  ('.') VARIANCE,

  ('.') PO_NUM,

  GJL. CREATION_DATE CREATION_DATE_IN_GLL,

  GJL. CREATED_BY CREATED_BY_IN_GLL,

  GJL. LAST_UPDATE_DATE LAST_UPDATE_DATE_IN_GLL,

  GJL. LAST_UPDATED_BY LAST_UPDATED_BY_IN_GLL,

  SYSDATE DATE_CREATED_IN_REPORT_TAB,

  (' 00/00/0000 00:00:00 ') DATE_UPDATED_IN_REPORT_TAB

  OF GEORGE GL.GL_JE_HEADERS.

  GJL GL.GL_JE_LINES,

  GL.GL_CODE_COMBINATIONS GCC,

  GL.GL_PERIODS OF BPL,

  GL.GL_IMPORT_REFERENCES IMP,

  XLA. XAL XLA_AE_LINES,

  XLA. XAH'RITH XLA_AE_HEADERS,

  XLA. XLA_EVENTS XE,

  XLA. XLA_TRANSACTION_ENTITIES TEXT,

  RA_CUSTOMER_TRX_ALL RCT,

  HZ_PARTIES LEFT,.

  AR. HZ_CUST_ACCOUNTS CA,

  GL_CODE_COMBINATIONS_KFV CC

  AR. RA_CUSTOMER_TRX_LINES_ALL CTL,

  AR. RA_CUST_TRX_LINE_GL_DIST_ALL CLTD

  WHERE 1 = 1

  AND GEORGE. JE_HEADER_ID = GJL. JE_HEADER_ID

  - AND GJL. STATUS | '' = 'P'

  AND GCC. CODE_COMBINATION_ID = CLTD. CODE_COMBINATION_ID

  AND GEORGE. PERIOD_NAME = BPL. PERIOD_NAME

  AND GEORGE. PERIOD_NAME = "M04-14'.

  AND THE RCT. CUSTOMER_TRX_ID = CLTD. CUSTOMER_TRX_ID

  AND CLTD. CUSTOMER_TRX_LINE_ID = CTL. CUSTOMER_TRX_LINE_ID

  - AND GLP. ADJUSTMENT_PERIOD_FLAG <>'Y '.

  AND GEORGE. JE_SOURCE = "claims".

  AND GJL. JE_HEADER_ID = JE_HEADER_ID IMP.

  AND GJL. JE_LINE_NUM = JE_LINE_NUM IMP.

  AND IMP.GL_SL_LINK_ID = XAL.GL_SL_LINK_ID

  AND IMP.GL_SL_LINK_TABLE = XAL.GL_SL_LINK_TABLE

  AND XAL. APPLICATION_ID = XAH'RITH. APPLICATION_ID

  AND XAL. AE_HEADER_ID = XAH'RITH. AE_HEADER_ID

  AND XAH'RITH. APPLICATION_ID = XE. APPLICATION_ID

  AND XAH'RITH. EVENT_ID = XE. EVENT_ID

  AND XE. APPLICATION_ID = XTE. APPLICATION_ID

  AND TEXT. APPLICATION_ID = 222

  AND XE. ENTITY_ID = XTE. ENTITY_ID

  AND TEXT. ENTITY_CODE = "OPERATIONS".

  AND TEXT. SOURCE_ID_INT_1 = RCT. CUSTOMER_TRX_ID

  AND THE RCT. BILL_TO_CUSTOMER_ID = CA. CUST_ACCOUNT_ID

  AND ALL. PARTY_ID = PART. PARTY_ID

  AND rcT.CUSTOMER_TRX_ID = ctl. CUSTOMER_TRX_Id

  AND CTL. LINE_TYPE = 'LINE '.

  AND XAL. CODE_COMBINATION_ID = CC. CODE_COMBINATION_ID

  AND THE RCT. TRX_NUMBER = '1000178867'

  If I put the CTL. DESCRIPTION of INV_LINE_DESC in the code he brings 8 rows when there are only 4 in the AR. RA_CUSTOMER_TRX_LINES_ALL for the trx named at the bottom of the code.

  the line inv desc is empty for 2 rows, but has a value for two. If I remove the line desc in him select the query returns the correct amount of lines.

  can anyone offer any help?

  Add xla.xla_distribution_links xdl in the from clause and add them as a result of the conditions

  AND xal.ae_header_id = xdl.ae_header_id

  AND xal.ae_line_num = xdl.ae_line_num

  AND xdl.source_distribution_id_num_1 = ctld.cust_trx_line_gl_dist_id

  It works for me and I hope for you as well

  Concerning

  Ma'ariv

• How to change the font size for the header component of group header text

  Hello
  
  I need to change the size of the default font of the text in the header of the component of the < af:panelHeader >. I tried to use a custom skin, but I'm not able to get the correct selection for it. I tried under css:
  
  . Af CustomHelpHeader | panelHeader {}
  do-family: Tahoma, Verdana, Helvetica, without serif.
  do-size: 8px;
  make-weight: bold;
  }
  
  and page jsff I use it like:
  
  < af:panelHeader text = "use this tab to add and offers customization".
  helpTopicId = "OHW_BUNDLE_GI_CS" id = "phContent".
  styleClass = "CustomHelpHeader" >
  
  This has no effect on the header text and the size of the displayed font is always default 14px.
  
  Can someone help me with the proper way to apply the counting?

  Hello..
  It's the PanelHeader h1 tag, we can apply your style by substituting the PanelHeader style as follows. It works for me xdl is the style of substitution class.

  
  
  and page jsff I use it like:
  
  helpTopicId = "OHW_BUNDLE_GI_CS" id = "phContent".
  styleClass = "xdl" / >