Windows 7 (64 bit) duplex printing on HP LaserJet 1320 using HP Universal printing PCL 5 of

Similar Questions

• How to operate a Casio CW-75 to Windows 7 64 bit cd printer

  Original title: casio cw-75

  Anyone can understand how to operate a Casio CW-75 to Windows 7 64 bit cd printer? I ran, but crashed hard drive and now that I'm all setting up, I can't make it work. Any help is appreciated!

  Hello

  Welcome to the community forums of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue. I see that you have problems with the printer, Casio CW-75.

  You download the drivers from the manufacturer's Web site?

  I suggest you download the drivers for Windows 7 64-bit of the article provided:

  Casio

  http://support.Casio.com/download.php?RGN=3&CID=005&PID=338

  If the problem persists, refer to article:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps. Please reply with the status so that we can help you.

• LaserJet 5 M and Windows 7 64 bit - duplex problem

  I have a Laserjet 5 M Postscript with a duplex printing unit in my home network.

  Windows 7 64-bit, the duplex printing option is not displayed.

  1. I reinstalled the driver - cool from MS
  2. I manually changed the ' properties/device settings' to indicate the duplex unit is "installed".   I have administrator privileges.
  3. I rebooted the machine.

  However, under preferences - or for actual printing, under available - possibility of double-sided printing is not displayed.

  Any help will be appreciated.

  My two machines from Vista (32 & 64 bit), with no problems, print double-sided on it.

  Alright George. I have discussed this with my colleuges and we agree that this thread would be better suited in the business forum. Since it is a printer and we focus only on consumption patterns. We would do a disgrace to not send you over there.

  Here is a link to Board commercial laserjet.

  Business - LaserJet HP Support Forum

  Im going to have a moderator hover over this thread to the business section for the best chance to get a solution.

  Take care!
  Sean

• Install HP fails under Windows 7 64 - bit for Printer series CP1020

  Hello!

  I tried to solve this for days, and I've seen a lot of suspense/unresponded to messages about the same topic so I hope that someone sees this!

  Product & number: Color LaserJet CP1025nw CE914A

   

  Operating system: Windows 7 64 bit

   

  Error message: HP LaserJet Installer has stopped working

   

  Changes made to the system before the error occurred: We have updated our info from the router, so I ran the installation disc to reconnect the printer wireless. He uninstall programs initially added to the sleeve of the printer.

  Details:

  -Very well, so 3 days ago we updated our router SSID and password for security reasons. Apparently, there is no easy way to update the details of the network for the CP1025nw so I had to run the installation disc. It prompted me to uninstall the software, reboot, and reinstall. I scoured the guests and then choose 'connect via a wireless network. After searching for the network, I then choose 'installation of Wireless USB '. I have to connect the USB cable when prompted, and as soon as the installation of the drivers I get the Windows error message posted above.  I've attached a screenshot of what appears as well.

  

  Frustrating is that the printer still works after the installation, but only via the USB connection. I need to get wireless working again, but without the software installation work, I can't seem to get there (unless someone knows a hack/work around).

  Event Viewer provides the following details about the error in the application:

  The failing application name: hpbcsiInstaller.exe, version: 1.5.6.4020, time stamp: 0x4bbf9f17
  Name of the failed module: hppccompio. DLL, version: 1.3.0.24, time stamp: 0x4c9685d0
  Exception code: 0xc0000417
  Offset: 0x000073bf
  ID of the process failed: 0 x 970
  Start time of application vulnerabilities: 0x01cdbc45b6632fa1
  The failing application path: D:\Installer\hpbcsiInstaller.exe
  Path of the failing module: C:\Windows\system32\hppccompio. DLL
  Report ID: cb4d353b-2839-11e2-be7e-002564531498

  I tried a wide range of solutions and none of them does not seem to work. Everything from the firmware update, delete all instances of files HP, including .inf files, installation with startup programs and services as the basis because they can get, etc.

  Help, please!

  See you soon,.

  Kirk

  Okay, well that was a beast of a problem to say the least. I am so relieved to be done with this nonsense.

  How it all started - a little recap:

  We changed the password on our wireless network we have updated for security reasons.  I could not find all that helped me update the details of the network (password or the SSID) directly on my printer and said all that I had to uninstall and reinstall everything (and re - run the wifi via USB connection). This is not the case - there is a much simpler solution that I have will cover also the end of this post. Anyway, as mentioned above, during the phase of the installation of device drivers, the installation program plant with the Windows message "HP Installer Setup has stopped working".

  How I fixed it:

  1. print a configuration page by pressing the button "resume" for a few seconds and let go. I have taken note of the following in the upper right:

  Status: Not connected
  Network in use: no
  IP address: 0.0.0.0

  I myself am continued to ask me if I could connect the printer directly via the port ethernet so I...

  2 connect a cat5 from my laptop to the printer.

  3 printed a second Setup page. Now, I got the following information:

  Status: connected

  Network in use: Wired

  IP address: 169.254.71.50

  4. I opened my web browser and tried to 169.254.71.50, but the page wouldn't connect. I recently built a computer game and has found a way to bridge the internet from a laptop wireless to a wired device (http://www.youtube.com/watch?v=96Z1_6rX5qU) so I was wondering if this could work with the printer.

  5 filled my network connections and wireless according to the video above.

  6a open my web browser and once more tried to navigate to 169.254.71.50 and it WORKED! (Not sure if this IP address is unqiue for my printer, but printing a configuration report is the best place to find it.

  7. I clicked on the Networking tab and then select Wireless Configuration.

  8. from there, I was able to activate my wireless connection, my password wireless update and choose I wanted to connect to the wireless network! This is how you can update your wifi information without having to do a complete reinstall!

  9. I now unplugged the ethernet cable (as suggested next to turn on/off radio buttons. My printer wireless power and is light stayed on. I have now connected once again!

  10. I don't think it was a crucial step, but I also implemented printing mobile ePrint

  11. I printed another page of configuration and can now see the following:

  Status: connected

  Periphery in use: wireless

  IP address: 192.168.1.115

  12. I can now navigate to the printer in my browser using this IP address and was able to find and print on my printer wireless through my phone, but still couldn't print from my wireless laptop.

  13. I inserted the original installation CD, held my breath and clicked on install. Hold your breath here is optional.

  14. He asked how I wanted to connect, and as before, I choose wireless. This time, instead of asking me to connect the USB, it FINDS my printer on the network. I chose this, clicked on continue and all installed successfully!

  Everything is now back to normal! I can use my wireless printer once more. Please let me know if anyone has additional information on the steps above need, or if something does not work for you because there is no other solution out there. Believe me, I spent HOURS AND HOURS to research. I hope this helps some of you!

  See you soon,.

  Kirk

• Windows 7-64 bit cannot print on HP Laserjet 1012

  I am running Window 7-64, and I can't find a 64 bit driver to activate the HP Laserjet 1012.  Can someone help this situation? Thanks, Sweet_land04

  I am running Window 7-64, and I can't find a 64 bit driver to activate the HP Laserjet 1012.  Can someone help this situation? Thanks, Sweet_land04

  You can't find a driver because HP does not support this printer under Windows 7 (32-bit or 64-bit).

  Read this web page, follow the links, etc.

• Windows 7 64 - bit Macro printing question

  I have problems printing using a macro in an application called iNews (made by AVID) on Windows 7 64 - bit installed on new Dell OptiPlex 9020 s.

  I've simplified the macro to just {Ctrl + P} {enter} and mouse freezes, keyboard does not (only Ctrl + Alt + Delete), without ANY error messages in the event log.  If I press Ctrl + Alt + Del then Esc, I can get out of the macro and the print job actually ends.  I noticed that the print job is in the queue in the queue, but won't be released only when I press Ctrl + Alt + Delete.

  When I completed the steps manually, the computer is not locked and printing works very well. It's only when I use a macro to print.

  Here are the troubleshooting steps I took:

  AVID contacted and they attempted to help, but it's an OS problem.

  The macro works great on Windows 7 32 bit.

  RAN windows updates

  Updated drivers from Dell

  For PCL6 and PS drivers printing and I tried the drivers updated (but the problem occurs on more than one printer, even Microsoft XPS Document Writer).

  Performed a clean boot (same question at a session of boot)

  Similar macro created in Excel works fine.

  Started the spooler, deleted files in c:\windows\system32\spooler\printers and stopped the spooler

  Any suggestions will be greatly appreciated.

  Thank you

  Karen

  Hello Karen,

  Please keep us updated on the status of the issue.

  As you mentioned are printers on a print server, the question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet Forums.
   
  TechNet Forum
  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Thank you

• WINDOWS 7 64-BIT HP2727NF PRINTER

  problems with my printer hpm2727nf laser. It prints well and copy very well, but I have to turn off and on so he could analyze. What should I do? running windows 7 pro 64-bit. any advice would be great, who currently use pcl6 (I think)

  You are welcome. I'm happy to help you.  When was the last time you restarted the PC?  I have seen this "Scanner not ready" error when you use other programs to scan in addition to the software of the printer, and some have been without success (may be out of reach if it happens in another program - but I'll still try).

  Go to your Device Manager (search for 'Services' when you click the Start button and select the Services with the gear next to her icon) and check your Services.  Make sure that 'Windows Image Acquisition' (WIA) is started and automatic.  It's not bad to stop and start over, but to restart the service is not a common practice (referring to your options at the top when you see this window).

  Then make sure that the other two dependencies are running: Detection hardware Kernel and remote procedure call is started and automatic.  Restart the PC and the printer, and then try again.

  If this does not work, try another USB cord.  I would like to know how the suggestion above works for you, and if it isn't, I have a few questions about your USB cord.

  I hope this helps!

• PSC 2175 windows 7 64 bit - stopped printing

  I have a HP PSC 2175 all-in-one printer/scanner/copier. I use a book ultra HP spectrum 13 w / Win7 Pro, SP1. Windows says that the driver does not work, printing to port USB001 (virtual printer port) the printer used to work fine, then it stopped. I suspect a windows update broke the driver somewhere, but because the driver is now provided with the operating system I can not uninstall and reinstall. All I can do is remove the printer and then add again, that did not work.

  The symptoms that are a few lines when printing from Word or PDF can print huge print through from top or bottom of the page, and a bunch of blank pages spit. Using HP print and Scan it says doctor through the correction of errors, but the test page spits out 2 blank pages. Windows test print spits out 3 pages, 2 white and the other with a single line in huge letters in the upper part. Printing a test print notebook product also 2 blank pages.

  Now even devices and printers in Control Panel does not respond. I submit this, I guess I'll restart. If anyone has any suggestions I would be grateful.

  Thank you

  Hi Rainbow-

  I ran the HP print and scan doctor a bunch of times in the past, in fact. All he could tell me was to reinstall the printer, who, of course, I can't really because the pilot is now in the operating system. After several attempts to remove the printer and reinstall USB cable, nothing seems to have worked.

  Until last night! I had scanned a bunch of pages last night - I had not scanned nothing since the printing problem began. Now, the printer works fine. It must have been a few old cruft somewhere in the communication link that performs a work of analysis seems to have cleared.

  I can't say that the scanning was difficult, but I can't say that it wasn't to be.

  Problem solved, thank you for all your help and attention - you kept I'm working on the problem, until it fixes itself!

  see you soon,

  Joe

• EasyCAP DC60 and windows 7 64 bit, code 10 no matter what I use, drivers

  I tried all the drivers I could find for easycap and I get "this device cannot start. (Code 10) » ! I tried to uninstall usb drivers and reinstall only them just to exclude and still no luck. I have seen people working this on 7 64 bit so I know it works for him. anyone else having this problem, or have ideas on how to solve this problem?

  PACK of 32-bit DRIVER FOR XP, VISTA AND WINDOWS 7 (for the Philips SAA7113 chipset STK1160) FROM HERE

  NEW PACKAGE of DRIVER for XP 64 bit, VISTA AND WINDOWS 7 (STK1160 ATV BDA for chipset Philips SAA7113) FROMHERE
  -NOTE! This 64-bit driver does not support the s-video

  NEW 32 & 64 bit DRIVER PACKAGE FOR XP, VISTA AND WIN7 (STK1160 Grabber for chipset Syntek 8113, which is changed to a Philips original by Syntek Semiconductor SAA7113 chipset) FROM HERE

  http://easycapexpertti.mybisi.com/product/EasyCAP-DC60-V21C-USB-20-video-capture-XP-Vista

  Use this adapter on another win7 64 bit computer to test

• Auto duplex printing is not available on Windows 8

  Automatic duplex printing works fine on my other windows systems.  The printer Web page shows that automatic duplex printing is supported / installed.  I can do when I print from my system windows XP very well, but my new system of windows 8 is not.  "I installed the latest windows printer driver 7 and options ' 2 sides print ' do not give automatic as an option.

  Is there a driver solution or something that needs to be done to get automatic duplexing on windows 8?

  Duplex printing one of the main reasons I bought this AIO, so which are important to me.

  Help.

  Thank you.

  The duplexer must be enabled in the driver, see the Vista/Windows 7 Duplex Printing solutions to the problems here.  Windows 8 would be similar to Windows 7 in the procedure.

• Problems in porting windows vista 32 bit on a 64-bit Windows 7 machine device driver

  Hello

  I'm porting windows vista 32-bit on windows 7 64 bit machine printer driver. I have compiled DLLs. When I add printer and load INF file, I get the message that this driver is not compatible x 64 driver. Please tell me what adjustments should I do in the INF file.

  Thank you.

  Go to the printer manufacturer's website and download the right driver (free) for your operating system. You should also disable automatic windows update - Start, made driver installation computer right click go to the settings/settings/device installation properties / Advanced - value - not let me choose/never install updated win - save changes, remove previous attempts also to devices and printers, have the printer on but do not connect the usb cable until you are prompted - install driver downloaded.

  If there is no 64-bit Windows 7 drivers don't try the 64 bit Vista driver, if it does not work then you will need a new printer.

• Download the officejet 6210 for windows 7 64 bit

  I can't not software for the 6210 printer one to install on windows 7 64 bit.  I want to continue to use the HP Director to scan etc.  Someone has an idea?

  Welcome to the HP Forum!

  le_kevin232 wrote:

  I can't not software for the 6210 printer one to install on windows 7 64 bit.  I want to continue to use the HP Director to scan etc.  Someone has an idea?

  There is no comprehensive software features for Windows 7 for your printer available on the HP support web portal. You can try to use the 64-bit of Windows Vista software incompatibiity mode. It may or may not work.

  Windows 7 is not an operating system that is supported by your printer. You may be able to install the base driver with the use of the HP printer install wizard for Windows 7. The base driver will allow printing features, but the scan and copy will not work.

  Kind regards
  ERICO

• Windows XP 32-bit on dv4-1117nr installation

  I am trying to install Windows XP 32-bit on dv4-1117nr, who initially installed Windows Vista 64-bit.

  However, whenever I start using the XP installation CD, it shows the Blue error screen and asks me to restart.

  Is there something wrong in the process?

  Thanks in advance.

  These instructions are from the user "answertome".

  The video is in Italian, but just pay attention to the screen, I was able to follow the instructions and make it work.

  Like the previous user said, you will need to format your hard drive, all first as well.

  first of all, you must have a regular o XP Professional licence. Vista Home is not inlcude the right to downgrade to XP.

  When you have your XP CD, if you try to install youi will have a screen of wheat with the code error: ERROR STOP 0xX0000007B. This because the Microsoft XP CD is missing from the AHCI driver for the SATA drive controller.

  You must add the AHCI driver on the XP cd using nlite software.

  the steps you need to do are:

  (1) download and install Nlite from site nliteos.com web

  (2) downlaod driver AHCI from HP ftp://ftp.hp.com/pub/softpaq/sp39501-40000/sp39786.exe

  (3) If you don't know how to use nlite, just look at the little clip that you can find here http://www.filecloud.com/files/category.php?user_category_id=283210

  You can see 2 clips:

  (1) add SATA driver by controller ICH9 (intel Montevina) .avi-> This shows how to add only the driver AHCI (a few words in Italian)

  2) integrareSP3_e_SATA_AHCI_finale_con_audio_e_logo2.avi--> This shows how to add the SP3 and the driver AHCI (audio in Italian, but you can understand it enough to see the video)

  When you have your new CD with SATA/AHCI driver, you will be able to install XP on your laptop

  Ciao

  Answertome

• Laptop HP 15-r033TX: did not find the driver wifi for my laptop to windows 7 64 bit

  Hello

  I need help. I did find the driver wifi for my laptop for windows 7 64 bit. Can you send me a useful link.

  Thank you

  Hello:

  Here is the link to the wireless card driver you need...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-131223-1 & CC = US & DLC = in & LC = on & JumpID = reg_r1002_usen_c-001_title_r0005

  You will also need the bluetooth driver...

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_130390_1

• Satellite U500 - ALPS touchpad driver for WIndows 7 64 bit

  I have a U500 - 00 X 012 (Australian model) which I've upgraded to Windows 7 64 bit. Toshiba Australia site says to use the Vista 64 bit ALPS touchpad driver. I could not any Vista driver to work with my U500.

  The driver is available from the Toshiba Europe website http://support1.toshiba-tro.de/tedd-files2/0/tpdrv-20091112112139.zip

  The driver is v7.105.303.117

  Hope that someone who saves the many hours I've wasted trying to get the touchpad to work.

  Hello

  Normally most Vista drivers work under Windows. You get an error during installation and what happens exactly?

  Another question: why you n t try the driver from the European page? Normally, it should also work on your laptop.
  Check it!