Xbox 360 will not connect to the Media Center after that PC has been asleep
My Xbox 360 connects to my Media Center as an Extender initially. When it works, it works very well. However, after my PC has spent time in a suspended state, it is at 75% chance that my Xbox won't be able to connect to the Media Center. Sometimes it will work, but more often it won't.
Restart my PC will allow the Xbox to connect immediately, but this isn't an ideal solution. I wish I could have my PC of a suspended state wake and correctly connected to the Xbox media extender.
Hello
(1) did you make any changes before the show?
(2) is the specific question when the computer wakes from sleep?
This problem may occur when the power is suspended in the media extender. I would have you go through the articles that might be useful.
Method 1: Tips for solving problems with Windows Media Center Extender Setup
Method 2: Windows Media Center Extender: frequently asked questions
Reference:
Set up Windows Media Center on the Xbox 360 (Windows 7)
Let us know if that helps.
Tags: Windows
Similar Questions
-
XBox 360 will not connect to the secure WRT54GS network.
Have you tried the suggestions we found in the forums for the connection manually and we continue getting a connection error. We rebooted the modem and the router as well, and the XBox 360 do not always connect. Any ideas how to make so that it can connect to our secure network without messing up the network that we have already had to reset and set again only a couple of weeks and don't want to go there again.
It turns out that the problem was with the Xbox360 not its wireless sensor and refusing to install the correct programming for it. Had well cleared.
-
Receiver wireless XBOX 360 will not connect to the controller with Windows XP 32-bit
I bought the receiver the other day and tried it on my computer. I installed the stuff that came on the disc, no problem. I plugged the receiver and tried to turn on the controller and it simply not picking up the controllers. I tried on all 3 of the controllers that I own, but nothing helped. I looked the problem on google and all say to install the new drivers on the "unknown device", but that doesn't seem to be the issue. My computer doesn't pick up the 'Xbox 360 wireless receiver for Windows' device no problem. But when I try to sync the receiver with the controllers I get nothing. He also says that I have driver 2.1.0.1349 if that helps
Hello
You can download Xbox 360 Controller for Windows using the following link:
http://www.Microsoft.com/hardware/en-us/d/Xbox-360-controller-for-Windows
If the problem persists, I suggest you to contact Xbox support for help.
http://support.Xbox.com/en-us/contact-us
I hope that helps!
-
It's VERY odd and very annoying!
I set up my laptop next to my Xbox 360 with an Ethernet cable directly connecting the laptop to the XBOX, and the laptop is on our wireless network. The XBOX has access to the internet (shared through the laptop), and when I test the PC connection and the connection XBOX Live sound fine to all.
So I'll try to set up Windows Media Center, it works great! I "Add Extender", put the code to 8 digits. It passes through the installation, all works, no problems and WMC opens on the XBOX, I can go into my library, watch movies etc... works great!
However! As soon as I turn my XBOX off and back on, it will fail to connect to the WMC.
He says his 'find Windows Media Center PC' which seems to work fine, it goes to the ' Windows Media Center loading screen "contact...". ", and after about 10 seconds, I get an error"failed to connect the Xbox 360 could not connect to windows Media Center PC. Make sure that the PC is turned on and connected to the network.
I tried to configure the Extender repeatedly, whenever it works fine until I restart the XBOX... :/ - and its strange cause I still the internet connection (shared through the laptop) after turning on the XBOX, its really JUST Media Center which is screwing around.
She continues to keep trying to connect then repeatedly fails.
If I wanted to, I could re-configuration the WMC Extender EVERY TIME turn off the Xbox, which works the first time without fault, but that's all just stupid.
I can't really understand what is happening here... any help would be appreciated.
Hello
Refer the article that could help you solve this problem.
http://support.Microsoft.com/kb/932163 -
My laptop sees my Xbox 360, but the 360 will not connect to the top of the Tower
I have a crossover ethernet cable
I tried everything, but the 360 will not find the network,
It saying that he "cannot obtain an IP address form the router or modem.
Your router or modem can be automatically assigns an ip address, you can try a static IP address instead
DHCP Server IP address form
Help please
Hey tons-of-pleasure-101.
You can set a static IP address on the Xbox 360 by going to network settings and then manually enter an IP address.
(1) type cmd in the start search field.(2) type ipconfig/all in this window, and then press the Enter key. This will display a lot of information.
3) take down of the IP address, subnet mask, default gateway, and name servers. Be sure to note which is which.
(4) type exit in this window, and then press the Enter key to close.
(5) once more, open the start menu. This time, click on Control Panel.
6) click view the status of network and tasks.
(7) select the settings of map on the left side of your screen.
(8) make a right click on your network adapter and choose Properties to open the properties of this internet connection window.
9) click Protocol Internet Version 4 (TCP/IPv4), and then the properties button.
Until you make changes, write down the settings you see on this page. If something is wrong you can always change the settings back to what they were! You should see a point in the obtain an IP address automatically box.
(10) choose an IP address and type in the IP address box. The ip address that you choose should be very similar to the ip address of the router. Only the last number of the ip address must be different.
(11) put the previously found in section mask subnet mask subnet. The default gateway should enter in the default gateway box. Enter the dns servers we prevoiusly found in the two zones on the DNS server. Completely out of this menu, click OK.
That's all you should be done.
Once done, you must assign a static ip address for your xbox as well.
When you're done, between the two, the only parameter that must be different is the actual IP address. The gateway and subnet mask must be the same on your XBOX and PC LAN connection.Refer to this:
Can not get an IP address from your router or modem
http://support.Xbox.com/support/en/us/NXE/xboxlive/troubleshooting/NetworkHelp_dynip.aspxThis should be it.
Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Xbox controller will not connect to the xbox wireless receiver?
I got my Receiver to finally work and now when I try to connect my controller that do not access, it just flashes continuous four lights repeatedly. How can I fix it?
Hello
Welcome to the Microsoft community.
Of your posts that I understand that you are facing issues connect the Xbox controller for Xbox wireless receiver.
Have you tried to use the controller on a different computer?
You can see the steps from the following link and check if it works:
Xbox 360 Wireless Controller disconnects or unable to connect
Reference:
http://support.Xbox.com/en-us/games/Xbox-controller-for-Windows-Info
You can also contact Xbox support team for assistance:
http://support.Xbox.com/en-us/contact-us?XR=footnav
It will be useful.
If you need assistance on questions regarding Windows, let us know and we will be happy to help you.
-
SK2061: The wireless keyboard will not connect when the PC is turned on.
My problem is, when I start the PC, (HPK-15 500, 319NA), wireless (SK2061) keyboard, does not connect. I have to shut down the PC so he can connect (no restart, you must stop it). Have had the PC for 5 months and it has been published. Not changed the battery makes no difference.
The internet statement States I shoud push the blue button until the USB receiver flashes. This PC does not have an external USB receiver, I guess it's built in! The mouse works OK.
Hello @JimCar82,
I read your post on how the wireless keyboard will not connect when the computer is turned on, and I'd be happy to help you in this case!
Re-connect your keyboard to your desktop computer wireless, I advise you to follow the steps described in this document on the keyboard and wireless mouse troubleshooting. The USB receiver should be found at the back of the tower.
Please re-post with the results of your troubleshooting, and I look forward to your response!
Concerning
-
Lexmark printer will not connect to the router
Original title: HELP
I switched to Fios and now have a new modem/router and I don't know how to get my Lexmark printer to recognize. How can I solve this problem?
Hello
Thanks for posting the question in the Microsoft Community!
The Lexmark printer will not connect to the router/modem.
Because the problem is with the Lexmark printer cannot connect to the router, I suggest contact you the Lexmark support team in order to get help with this question.
You can try to get help on the site:
If you need any help or if you encounter problems with Windows in the future, let us know and we would be happy to help you.
-
Why Vista will not connect to the internet wherever I'm connected with my XP machine?
Why my computer won't get online wherever I like Xp only
Why Vista will not connect to the internet wherever I am? I thought what to see that there is a link to a site to repair this, but when I found the site the link had disappeared. Thank youHello
1 are you facing issue while trying to connect to public Wi - Fi hotspots or private home network?
2 have you tried all of the suggestions of Fahimulla K?
I suggest you to go through the steps mentioned in the link and the Coachman.
Solve problems, find wireless networks
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks
See also:
Wireless network card: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions
-
Photoshop CC 2015 (Norwegian version) will not start. The following message: Adobe Photoshop CC has stopped working. A problem caused the program stopped fungeresom correctly. The program will be closed and you will be notified if a solution is available.
reset your preferences-
Acrobat: http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7feb.w .html
Adobe media encoder: https://forums.adobe.com/thread/1713540
Legacy: http://helpx.adobe.com/after-effects/using/preferences.html
Bridge: https://helpx.adobe.com/bridge/kb/troubleshoot-errors-freezes-bridge-windows.html
Dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
Flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
Illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html
InDesign: https://forums.adobe.com/thread/526990
Lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html
Muse (mac): https://forums.adobe.com/thread/1246022?tstart=0
Photoshop: https://forums.adobe.com/thread/375776
Photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
elements of first: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html
First pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html
If that fails, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall
-
I keep losing my connection to the Media Center on my D-Link DSM 750
I keep losing my connection to the Media Center on my D-Link DSM 750 when you try to view the video library. Music photos and everything else works fine?
Hi Ghostrider457,
Are a. When you facing this problem?
B. you get errors?
C. recent changes made on the computer?
Method 1
Try temporarily disabling the firewall/antivirus software and check if the problem persists.
Turn on the firewall / antivirus after you check the status.Method 2: new user account
1. open user accounts by clicking the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.
2. click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
3. click on create a new account.
4. type the name you want to assign to the user account, click an account type, and then click on create an account.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
Try and tell us the result.
Bindu S - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think -
My iphone will not suddenly be updated to icloud photos? It has been working well recently and I tried restore, reboot, turn iclould off photos and return, etc... can anyone help? well worked yesterday and now not... most of the time the number of photos don't match same new how I am download to icloud...
Have you tried the signature to iCloud and then reconnect?
Try a reset.
-
Windows Media Center could not update Playready after that kb3004394 has been installed.
Windows Media Center could not update Playready after that kb3004394 has been installed. I then uninstalled kb3004394 and tried everything I can find on the web for difficulty playready including this procedure
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/PlayReady-update-was-incomplete/8119d0a8-6106-489D-B5CB-4979a6a9ad0e
and this procedure
http://www.hydrous.net/weblog/2012/08/20/resetting-PlayReady
Nothing worked and I'm pulling my hair out. I use WMC with an HDHomeRun and a map of Time Warner cable. This facility worked well for more than a year before installing this update. The machine is a Dell XPS 8300 running windows 7 SP1. I'm unable to watch all channels protected by DRM and I lost all my legally registered content. It is a disaster and cost me 30 hours and counting. Anyone have any ideas?
I don't know your problem, but 3004394 has caused a lot of problems for a lot of people - https://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/windows-update-kb3004394-issues/ace25277-7f65-4486-bc44-c1b106907a18.
Microsoft have apparently released an update of replacement/deletion for it - https://support.microsoft.com/kb/3024777?wa=wsignin1.0
But to a few other posts on this forum, it seems to fix everything for everybody. If all goes well it can help you.
If not, allows to see what MS themselves have to say.
-
I downloaded and tried to install CS6 on my computer after that machine has been upgraded to Windows 10. I get a message that says "serial number is not for the product." The drop-down list does not contain CS6 Design and Web Premium. What should I do to get loaded and enabled on my computer?
That fall down, and the serial number you provide must identify the previous version that you upgraded because CS6 is an upgraded version in your case.
Error "this serial number is not for a product calling it" | CS6, CS5.5, CS5
http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-qualifying-product.html
-
I read that Chrome fell npapi support - in the article, he says that firefox has been in December. Is this true? I can't find a source.
Google announcement is here: Blog chrome: say goodbye to our old friend NPAPI
I'm not aware of any time line of em "NPAPI" plugins in Firefox for desktop systems. However, the "click-to-play" function, which has been amended in several press releases, could get some additional revisions...
Maybe you are looking for
-
Windows do not appear at the start of FCX,
If I click on FCX to open any program windows appear. There is a small black dot next to the icon of the FCX to show the program is open, but there is nothing there. I also tried to just open a single library and nothing comes in fact. (curiously, Ch
-
Tile preferably empty in 33 Firefox for Mac
I am running 10.9.5 - 33.0 FirefoxIf I select preferences I get a new window, but it is blanl. Help, please Thank you Tommy
-
Satellite M70-129: user password controls access to the system at boot
Hello 1. from Toshiba Assist (password utility) I put the supervisor with string (text boards) owner password and then I put the user with chain owner password. But during startup BIOS only prompt you for the user password and his Rosary of owner. Us
-
Tecra A9: Windows does not start after you turn off multiprocessor in BIOS
I use a Toshiba Tecra A9 with a Core 2 duo. I need to change the bios setting to run a special program, "multiprocessor: disable. Now, I've changed back to the bios setting "multiprocessor: activate ' and win xp stop start after login. With "multipro
-
I use ACS 5.3.0.40.8 with GANYMEDE + maintenance device AAA and RADIUS maintenance the Cisco Wireless to access user AD environment. How can I implement 802. 1 x with the current implementation of RADIUS with users without distracting current thread