XP does not recognize my graphics card

Similar Questions

• Portege R700 - Autocad 2011 does not recognize the graphics card

  Hello

  I have toshiba Portege R700 with 64-bit win 7 installed.
  I need the computer for use with autocad 2011.

  For some reason any auocad does not recognize the graphics card installed on the computer.
  I suspect it because very little memory is allocated for the graphics card.

  How can I change with the memory allocated for the graphics card, or perhaps, can someone show me where can I find a driver that supports autocad.

  Thank you very much!

  Hello

  What Portege R700-xxx you have exactly?
  As far as I know the graphics memory cannot be assigned manually.
  Everything is controlled by the graphics driver and you have no influence on this

  You can try updating the graphics card driver maybe it would help.
  The most recent driver found on the page of the European driver Toshiba
  If not, you should check the manufacturer of the graphics chip driver

  Good luck

• Windows 7 does not recognize the graphics cards

  I have been using the same PC for the last six years of the game without any problem, I upgraded to Windows 10 and things went to * a few days after talking to Microsoft Care I was told that with the latest version of Windows 10 updates and other updates my system is no longer compatible with Windows 10 and I did a clean install to Windows 7. now, Windows 7 does not recognize my graphics cards 2 x 'GeForce GTX 480"with SLI configuration.

  In "Device Manager", it shows two units operating as VGA standard with no details etc.

  It install drivers for the 'GeForce GTX 480"because it does not recognize their being there.

  Any ideas or help... Please also stay simple for a non PC Geek

  No problem if nothing else, you've found the system images is now with win-10 days worth being pushed m main $ :)

  It of free and worth to be using,

  http://www.Macrium.com/reflectfree.aspx

• Since the new update Illustrator does not recognize the graphics card to my SURFACE PRO 2 and the digitizer stylus does not work properly.

  Since the new update Illustrator does not recognize the graphics card to my SURFACE PRO 2 and the digitizer stylus does not work properly.

  Any ideas out there?
  I know the pro 2 surface is not the real model, but at least it should work fine.

  arwinq,

  You can see the system requirements, including the maps here.

  https://helpx.Adobe.com/Illustrator/system-requirements.html

  but I fear that you may be taken in this GPU issue described by butz in post #13 here:

  https://forums.Adobe.com/message/7773402#7773402

  You can try to switch between GPU and CPU by pressing Ctrl / Cmd + E, or you try disabling GPU performance by clicking on the icon of the rocket in the bar of the App, or on the top of the menu bar, deselect the box Performance GPU. You may also uncheck performance GPU in your preferences.

• 2015 CC Photoshop does not recognize the graphics card GeForce 850 M

  The NVIDIA Control Panel settings do not solve the problem. When I use global settings, Photoshop recognize only the Intel card:

  

  
  

  
  

  And when I put "High Perfomance... ", Photoshop does not recognize the graphics processor (the processor settings graphic is completely disable):

  
  

  
  

  Adobe Photoshop CC GPU (graphics processing unit) and card FAQ video

• Windows Vista does not recognize the graphics card and the broadband

  Original title: recognize the graphics card and the broadband connection

  Windows vista can't recognize the graphics card and the broadband connection in the Dell laptop

  Hi mfadhelmu,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  3. you receive messages or error codes?

  4. have you updated all device drivers?

  You can try to launch the Fixit and see if it helps:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• MacBook Pro does not recognize my SD card?

  My MacBook Pro does not recognize my SD card, even with an external card reader. However, this same SD card can be read through my iMac. Don't know what I'm doing wrong here, but I'm going abroad and would like to be able to download my pictures I'll.

  You didn't say what model / year is your MacBook Pro.

  I found this video, don't know if it applies to you. https://www.YouTube.com/watch?v=nbc0l-t3f1Q

  Kim

• Satellite A110-294 does not recognize the wireless card

  Hello

  the question is:
  Why my Satellite A110-294 does not recognize the wireless card?

  I re - install Xp PRO with all the drivers.

  I have try all the drivers Wireless: Wlan intel + proset intel atheros wlan + wlesscmgr

  I don't understand, can you help me?

  Thank you
  André

  Hello

  To my knowledge, the A110-294 uses the Atheros WLan card and therefore the Atheros Wlan dirver should be the right one.

  You can find the latest driver for Atheros WLan here:
  http://APS2.toshiba-tro.de/WLAN/

  Just a question;
  You see the local network card in Device Manager? I mean, you should see an Ethernet controller or an unknown device in the network adapters
  The driver is missing, then the device must be marked with a yellow exclamation point

• Satellite L655 sometimes does not recognize the wireless card

  I have a L655. Most of the time it works perfectly fine. Sometimes when I turn on my computer, it does not recognize my wireless card. He considers that it is not at all.

  The icon in the status bar says that there is no cable ethernet plugged in and nothing on the wireless.
  Usually this icon is not present, and one for the wireless is (whether it is connected or not and if there are connections available or not). In the device manager there is nothing for the wireless card.

  Under network card it has only ethernet. Its as if it does not exist.
  Basically the way to solve this problem is by restarting simply my computer until he figures it.
  Sometimes, it can take 5 or more times.

  Any help please?

  Hello

  What satellite L655-xxx you have exactly?
  As far as I know there are different models with different wireless network cards.

  Your BIOS is up to date? Please check this box.

  So now to a few proposals of solution:
  First of all that I recommend to check if the update of the Wlan driver would improve the Wlan functionality.
  In addition, you must deactivate the energy saving feature for Wlan in Device Manager and Windows 7 power options as well.

• 5 c does not recognize the sim card

  I got a plan on the development of media and 5 c. Phone is unlocked and now does not recognize the sim card. What should do?

  What is the error message you get?

• T440p - Ericsson N5321gw does not recognize the SIM card

  Hey, my new T440p with integrated WWAN Ericsson N5321gw does not recognize the SIM card. I am running Win7 64 Bit and in the Device Manager, I see the Ericsson unit without any error. Once I launche logins, I have the error message if there is no SIM card inserted and I have to insert the SIM card and try again. The SIM card is inserted as indicated next to the slot (although I tried in other ways, too). I tried two different SIM cards just to be sure, two SIM cards work in my phone. Any idea? Thank you very much!

  
  

• Hello! I restored my iPhone 5 because IOS 9.2 does not work well, and now the IPhone does not recognize the SIM CARD ☹️ please someone help me! What can I do?

  Hello!! Recently, I have restored my iPhone 5 because IOS 9.2 does not work well. But now my iPhone does not recognize the SIM CARD.

  I Don' t know what to do, help me please

  You get an error message?

  What did he say?

• My HP Pavilion dv5 Windows 7 Home Premium does NOT recognize my sd card

  I need help! My computer does not recognize my sd card, or my sd card to my micro sd card adapter. I'm starting to think is housing, given that the sd card is recognized on my cell phone.

  Hello

  Check their documentation online with the HP Support and drivers, diagnostics and ask to their
  Forums about known problems. If it's the USB adapter, it can be removed/disabled in BIOS

  and/or Device Manager and a used external is not that expensive.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ====================================================

  References to Vista also apply to Windows 7.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are the same
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick three 1
  are there choices to see if any.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• An SD card is inserted, but my laptop Packard Bell does not recognize the memory card.

  Original title: peripheral equipment

  An SD card is inserted, but the PC (my laptop is a Packard bell) has no reaction. It does not recognize the memory card.

  Thanks for your help.
  Christine.

  Hi Stefano,

  Thanks for posting your question in the Microsoft Community.

  This problem can be caused if the SD card is damaged or the card reader may not work properly.

  1. What is the brand and model of the SD memory card?

  2. What is the number of the model of the Packard Bell laptop?

  3. you receive an error code or the message after inserting the SD card into your laptop?

  4. have you made any recent hardware or exchange of software on your computer before the show?

  5. have you tried to insert different SD card in your laptop?

  6. have you checked the SD card in another computer?

  7. you try to connect the SD card to a built-in card reader or externally by USB port card reader?

  8. is the specific question to a SD card or any type of cards?

  9. are you able to detect the SD card in the Device Manager?

   

  Open the Device Manager:

  http://Windows.Microsoft.com/en-in/Windows7/open-Device-Manager

  If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  Open the hardware and devices Troubleshooter:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

   

  For reference:

   

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• BlackBerry smartphone Blackberry Bold 9900 does not recognize my sim card

  Hi, so I used all charges to my battery, loaded up and subsequently turned back on - all of a sudden the device does not recognize my sim card.

  The message that appears indicates that I inserted a new sim card - but I did not - and asks to connect you using my Blackberry ID username and password. I've done this, but my password was not recognized so I reset it online - it is said that the password was changed successfully, however, it still is not recognized when I go into my device.

  Someone please help? Thank you in advance!

  No, they are on the memory of the device. You should be able to connect the device to your PC and use BlackBerry Desktop Software to make a backup.