XP games... it'll work in win 7?

Similar Questions

• An old game that I play in Win XP (Spear Of Destiny) will not work in Win7

  I like to play old games that work in Windows XP, but do not work in Win Vista or Win7. I get the messge of error "this system does not support mode full screen. The games are all games Wolfenstein and Spear Of Destiny. Any help appreciated. That's all that keeps me from switch to Win7. I have two computers running Win7 and will not work in both, so it is not unique to a single computer.

  This system of all games Wolfenstein and Spear Of Destiny may be played on win7? If this isn't excellence of sysem, then launch the game mode of compatibility , and you're done.

• I have been using the functionality of Firefox in which I could have multiple sets of tabs open, but only see the game I was working with. I have updated and now the functionality is Gone

  I have been using the functionality of Firefox in which I could have multiple sets of tabs open, but only see the game I was working with. I have updated and now the feature disappeared. I had a small icon on the top right of my toolbar. I used it all the time to keep windows separated for financial, plans to travel items, news, etc.. Has it been removed from Firefox?

  Hello

  The feature of tab groups is always present. You can try with the button right of the + after the last tab and Customize. If the icon is hidden behind the other, or if it is available inside the mini window customize, you can put it back. If the problem persists, you can also try of reset toolbars and controls: and start to make changes and restart in Safe Mode screen.

• Satellite A210-1AP: supervisor password utility does not work for Win 7

  I have the utility supervisor password v2.00.05 for Win 7, but it is not working on Win 7 I can't change my password!

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=DL&OS=&category=&MOID=1871687& rpn = PSAFGU & modelFilter = A210-ST1616 & SelCategorie = 3 & selFamily = 1073768663

  I used this link.

  Model short is psaele
  Where I can find all the drivers and all the utility for Win 7.

  Your laptop is not model portable American and you must use drivers of European support page.
  For now, Toshiba has not begun support Win7, but I hope it will happen soon. The question is if your laptop model will be supported Win7.

  In any case, I think you can use touchpad driver designed for A300, but it takes that Toshiba offers all drivers.

• Diablo 1 does not at all, 12 years old game does not work on the new computer

  Hello, I have a Toshiba Satellite P200 with Windows Vista 32-bit, it has an ATI Mobility Radeon HD 2400 video card. I also have 10 installed Direct x which, according to the manufacturers of my video card is compatible. I ran a test game that was included with the CD and it said that everything is okay. But it is still coming up with this error. "Diablo could not correctly initialize your video card using directX" then it tells me to update my directx which I did. check and update my driver for my graphics card and make sure its compatiable which I did and it's. I've been to Blizzard games, and they said that can not help me and I have to go to the manufacturer of the video card. I went to them and they said because it was a laptop they cannot help me with this and told me to goto, the manufacturer of my laptop that I do at the moment, but if someone had this problem and have any ideas how I can get this race please tell me thanks.

  This game was designed for Windows 95. Of many old games do not work under NT (on XP and Vista) kernel unless you use the emulation such as DOSBox.

  You can try setting the game to run in Windows 98 compatibility mode (click with the right button on the games EXE file, select Properties-> Compatibility tab).

  Otherwise, you will need to install Win95/98 and possibly to use a video card more old since display drivers change so rapidly and drop the old features not more used.

• Firefox did not work in Win XP SP3

  Firefox did not work in Win XP SP3

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729;. AskTB5.6)

  Joko Hello.

  Can be a little more specific about what you did and how it did not work?

• Satellite L50-A-19N - need to update driver nVIDIA - some games do not work

  Hello

  I have the problem with drivers nVIDIA for my 740 M,
  The thing is that I can not update drivers because any drivers I have install my core 580 MHz GPU clock drops everything at stake. But when I return to the first drivers that I had on my base GPU clock portable (326.60) is 1058 MHz all-in game.

  The problem is that I can't run some games because I need to update the drivers.
  Just some games do not work on 326.60.

  I tried to contact customer support, but the page is not available. -.-'

  Hello

  First of all, please note that use of the 3rd third-party drivers is at your own risk.

  You must use the drivers supplied by Toshiba driver page because these drivers are changed and designed for mobile use.

  This driver supports the overheating protection, which means that in the cases that the temperature of the GPU would rise to higher level, the driver would clock down the GPU to maintain the temperature at the lower level.

  Of course, as I said above, you might try to test the drivers from nVidia page but it is at your own risk.

• Qosmio F20 - freezes in games and my work in 3D

  I have the drivers from the toshiba site.
  The card is Geforce go 6600.

  EDIT: Sorry about the site told me that I have swearing etc which I wasn't

  When I play games some aspects in the games do not work, and when I do my 3d work it freezes and short slow when I activate the texturing material.

  I don't know what to do. It never happened when my recoverydisc worked, but which is now scratched.

  > It never happened when my recovery disk worked...
  After the installation of the operating system with the recovery disk you absolutely clean OS preinstalled without some updates, additional software or another background application that can use a lot of resources s notebook.

  I don't know how long do you use pre-installed OS now and how many things are installed there.
  Perhaps, you must clear the OS preinstalled, remove all the unnecessary stuff and disable unnecessary background processes, Disk Defragmenter HARD and so on. Simply, you need to optimize OS preinstalled.

  Only driver probably will not help much. There are of course other factors responsible for the freezing of behavior.
  By the way: have you ever checked if the laptop is dirty and full of dust?

• Satellite A300D-205 - Fn buttons do not work with Win XP

  Hi all!

  I installed windows XP for my toshiba Satellite A300D-205,

  I found compatible drivers and all devices work properly except multimedia functions Fn and sensor-buttons next to the main keyboard!

  I tried to install Toshiba Value Package added, but it does not work in win XP...

  Do you have ideas of how make this stuff work? Y at - it Toshiba VAP for XP?

  All responses appreciated. Thank you.

  Kind regards...

  Post edited by: freackh

  Look, man

  The VAP (value added package) was designed for Win Vista and Win 7 ONLY!
  There is no PPV for Win XP!

  Satellite A300D-205 belongs to the PSAHCE but the Toshiba series European driver page does not provide the Win XP drivers for this series! There are only Vista or Win 7 drivers.

  To be honest, Win XP is oldie was a King in the past, but the King living death the King (Win 7)

  I doubt that you will get Win XP drivers created for this series and so I doubt that you will get to the buttons FN.
  But of course, you can try to install common Module, Hotkey Utility, utility Hotkey to published display to other devices perhaps series (A300, A200, etc.), you could get the tools running that would allow the FN keys

• Games does not work properly on Satego P100-10F

  I can't play WOW or Quake 4 on my laptop.
  Games don't work well. It is lagging and the noise makes noise.
  I have a few different drivers installed, but the problems are still there.
  Thx for the help.
  Base t 5500 gf 7900 gs 512 MB 5200 upm 2 GB ram 8 MB hdd

  Hello

  It is not easy to say small jets, the problem may be, but before you start the games stop all unnecessary processes. Also check if antivir application check the CPU and HARD drive to run under the pressure of force.

  This notebook should have good performance, and I'm really a bit confused. By the way: you have to test it with other games? Is the result always the same?

• LabVIEW 7.1 application does not work on Win 7 64 bit

  Hello

  I created an application with LabVIEW 7.1 and related Setup (including the support screws). After installation, the application works on Win XP 32-bit, Win 7 32 bit, but he can't find some analyze VI under Win 7 64 bit.

  Is a LabVIEW 7.1 all application running on Win 7 64 bit, or is it a different problem?

  The messages are that it does not find the screw following "Mean.vi", "ReadFFT.vi". Opens the window of the façade of the demand, but with a broken 'execute' button.

• "game has stopped working".

  I can't understand it. I've updated windows vista 32 bit. I've updated my card graphics and directx 9 drivers. I also tried to reinstall and I downloaded from different places and got the same thing. I also tried to disable DEP and run the game as administrator. I'm now ideas so any help would be great.

  So basically when I run the game that instantly breaks down and a window pops up that says "game has stopped working" "windows can check online for a solution...". "and you can click on check online or close the program. There is also an arrow down for more details, click that and it says this:
  Description:
  Stopped working

  Signature of the problem:
  Problem event name: APPCRASH
  Application Name: ProjectTorque.bin
  Application version: 1.0.0.0
  Application timestamp: 4a8984bc
  Fault Module name: KERNEL32.dll
  Fault Module Version: 6.0.6000.16820
  Timestamp of Module error: 49952034
  Exception code: e0434f4d
  Exception offset: 0001b09e
  OS version: 6.0.6000.2.0.0.768.3
  Locale ID: 1033
  

  Hi C0123,

  Let us perform the following 4 methods and check if one of these help us resolve the issue.

  Method 1.
  I recommend you to run the Memory Diagnostic tool and check memory problems.
  See the following article for more information:
  Diagnosing memory problems on your computer
  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer

  Method 2.
  If you think that any activity of virus that I highly recommend to run the Virus Scan.
  I recommend you to run online Virus Scan to remove any infections, as appropriate.
  Follow the link below to start the free online scan:
  http://OneCare.live.com/site/en-us/default.htm
  The following thread discusses the removal of viruses and malware online:
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Method 3.
  I would also recommend you to uninstall and reinstall the game and check.

  Method 4.
  We can also try to play the game in the State of clean boot and check if it works very well.
  Here are the steps to do:
  Clean clean boot:
  1. click on start, type msconfig in the search box and press ENTER.
  The user account control permission.
  If you are prompted for an administrator password or confirmation, type
  password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load starting points.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.
  9. When you have finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig.exe in the start search box and press ENTER.
  10. If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
  11. When you are prompted to restart the computer, click on restart.

  We hope to hear from you soon.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• unsupported game: why the most of the games does not work on windows 7?

  Why do most games doesn't work on windows 7?

  If yes how can I do?

  Hello forevermaster,

  Thank you for visiting the Microsoft answers community.

  Visit http://windows.microsoft.com/en-us/windows7/help/compatibility and see if the steps under the title program does not properly? helps solve your problem.

  Hope this helps

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Deskjet 3420 does not work with Win 8?

  Hi all!

  I am facing a lot of problems with my printer (Desket 3420) that doesn't seem to work with Win 8. I installed it first with the 'old' drivers supplied with the original CD, and then, when I discovered the problems of compatibility, I tried the Deskjet 3600 drivers provided by Windows Update.

  The printer seems to be properly installed and "ready" (if I can see in Control Panel), but every time I launch he grabs a sheet and seems to start printing but awkwardly, with characters bad and extremely slow, even if I set the option "starts printing immediately" or, Alternatively, "start printing when the coil is complete! Also when I try to delete a document in the print queue, it seems not respond!

  Can someone help me find a solution? There is the chance to use this printer with Win 8 or I have to buy a recent news?

  Thank you for the support.

  Hello

  As you can see below, I'm afraid your pritner is not compatible with Windows 8:

  http://support.HP.com/us-en/document/c03457812

  Shlomi

• Oberon Media games does not work

  I have 2 games Oberon Media, that run is no longer. Despite having been advised to do various things by Oberon, I always get the message "launch exe - unidentified publisher wants to access your computer". When I allow it and click the 'Play now' games I get the message "..." game has stopped working - Windows will close the program and notify you if a solution is available. I tried to restore files from quarantine / blocked everything that mentions the name game, but again without success. I uninstalled and reinstalled at least 3 times and still the same. I have Windows Vista Home Premium, Service Pack 2, 2.40 Ghz RAM, 159 GB free on the hard drive. I have Comodo (free version) Antivirus, firewall and Registry Cleaner installed (Windows Firewall disabled), Windows Defender runs as well, and I have Malwarebytes' Anti Malware that I run on a regular basis. Thanks in advance!

  freddytheteddy7

  Have you tried to run the application as an administrator?  Try, right click on the launcher and choosing "Run as Administrator" and see if that helps.  Also, if this does not work, you can click with the right button on the Launcher, click Properties, click the Compatibility tab and tell him to try to run the game in Windows XP SP2 mode.  See if it works for you.

• loaded Microsoft combat flight simulator ww11 europe series. Unable to get game start with the joy stick. game with keybord works. gamepad is new logitech 3d pro extrem

  loaded Microsoft combat flight simulator ww11 europe series.  Unable to get game start with the joy stick.  game with keybord works.  gamepad is new logitech 3d pro extrem

  Hi Li-ngme,
   
  (1) have you installed drivers for the joystick correctly?
   
  It seems that the gamepad drivers is not updated for windows 7. Let us know if the gamepad work on other games under Windows 7.

  Try to access the link below and install the drivers for gamepad for windows 7 and even install as an administrator.
  http://www.Logitech.com/index.cfm/441/291&Hub=1&CL=GB, in? WT.z_sp = Image

  If this does not work, try to contact Logitech and check if they have updates on this for windows 7.
   
  ThaThanks and greetings:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.