XP home bsod cannot start without failure or last known configuration mode, do not have a startup disk or any what CD of xp

Similar Questions

• Windows XP does not start normally, without failure or last known good configuration mode

  I was installing Intel chipset drivers and installing, I had a blue error screen IRQL_LESS_THAN_OR_EQUAL, or whatever it was and had to restart. Now that the system hangs when booting normally in safe mode (after loading, or train load... system32\drivers\wmilib.sys), or by using the "last known good configuration". Any ideas? Thank you.

  Hello

  Yes, Windows can be a bit particular when it comes to system files that are essential, but glad to hear that you guessed it sorted.

  You may need to download the USB drivers on another machine and transfer them via USB stick, or something like that.

• I get this error message with my DVD player: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete."

  I get this error message with my DVD player: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete." I tried to reinstall the driver when the computer prompted me to do it, but there was an error with this as well. My computer will not all read the disks.

  Original title: Matshita DVD-R UJ 890

  Hi AJordanMiller,

  Try these methods.

  Method 1

  Run the fix - it from the link below.

  Hardware devices not detected or does not
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 2

  See the help article:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060

  Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  It will be useful.

• Error message: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete" and DVD disc is not recognized.

  Original title: My DVD drive is not recognized, it works physicaly works fine, but the pc does not even detect it exists.

  The error that says: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete."

  I did a backup and restored my system to the factory settings. After doing this still dvd was not recognized. I don't know what to do, my computer is new and Security told me that they will restore the pc and try to fix it, I can't risk my documents of the University are the same that has not worked for me before.
  Could someone help me?
  -The pilot is the last in line.
  -The works of reader dvd but the computer is not reading it, it does not even appear on the section 'computer '.
  -J' tried to use a "fix - it" on Microsoft online, but it doesn't work anymore.
  -My OS is Windows 7.
  -A restore factory settings did not work at all.
  Thank you.
  Claudio Nahmad
  Mexico City

  Hi, Claudio Nahmad,.

  This error can occur if the data in the registry for the device and its driver has been corrupted.

  Since you have already done a factory restore, leave, try to uninstall and reinstall the driver CD\DVD and check if it helps.
  Code 19: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged

  We can also refer to article and check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Important: The above links contains steps to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information, you can view the article:

  Back up the registry

  You can also try to install Windows updates, including optional updates driver and check if that helps.

  Install Windows updates in Windows 7

  Hope the helps of information.

• The KB2929437 patch is not installing on my PC. Without this fix IE 11 business mode is not activating.

  I am running Windows 7 and IE 11. The KB2929437 patch is not installing on my PC. When you try to install, I get the message that this patch is not applicable to your PC. Without this fix IE 11 business mode is not activating. Help, please

  Hello

  Please contact Microsoft Community.

  Please provide detailed information about your question.

  According to the description of the problem, it seems that you can not install the patch (KB2929437), this problem may occur if one or more of the following conditions are met:

  1. The Windows Update database is damaged.
  2. Antivirus software is configured to scan the folder % Windir%\SoftwareDistribution.
  3. Service (BITS) Background Intelligent Transfer Service does not receive a content link header.
  4. A required system file is incorrectly registered.

  If it helps, try the methods and check them off below.

  Method 1

  If I'm wrong, you tried not Troubleshooting Windows Update below to solve your problem and if this isn't the same link, then try to run the troubleshooter.

  Open the Windows Update troubleshooting tool

  http://Windows.Microsoft.com/en-in/Windows7/open-the-Windows-Update-Troubleshooter

  Method 2

  Step 1

  If the problem persists I suggest to reset the Windows Update components and for this, try to run the fixit described in the following article. If you already tried the fixit even before that I ask of you rerun the fixit.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us#LetMeFixItMyselfAlways

  Step 2

  Try to follow the steps in the Microsoft Article and check if it helps.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-7

  Method 3

  If after completing the two steps issue persists trying to follow the steps described in the following Microsoft article different methods.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Registry warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  You can use the following link to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756/

  Important:

  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Additional information:

  You can also refer to the following Microsoft article for more details on the update (KB2929437) .

  Description of the update of security for Internet Explorer 11 on Windows 7 and Windows Server 2008 R2: April 8, 2014

  http://support.Microsoft.com/kb/2929437/en-us

  I hope this helps. If the problem still persists, post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• "Windows cannot access the specified device or file. You can not have the appropriate permissions to access the item. "When you try to open a. EXE file.

  Windows cannot access the specified device or file. You can not have the appropriate permissions to access the item.

  Well, I was on my computer, I tried to open an exe file and I got this message

  Windows cannot access the specified device or file. You can not have the appropriate permissions to access the item.

  I have windows xp, anyone have an idea what to do?

  Hi Reaper14,

  ·         The question is limited to this particular .exe file?

  ·         You can open other files very well?

  If you are unable to open a .exe file, refer to the following article.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  Click on the link below.

  Cannot open EXE files

• Windows xp home edition cannot start.

  Hello I have an emachines 270 and loading to the top it says sorry for the onconvience, but windows does not successfully start a hardware or software change might have caused this and it remains on this page and also among the reboot for pc cd is broken

  A lot of recovery options require you to enter the Bios and make sure that booting from a CD or floppy disk, is set to boot from the hard drive.  They are not started by loading Windows, they run outside any Windows environment.  If you cannot start your machine in this way can be unservicable and need repair or replacement.

  See if you can borrow an XP CD and load the Recovery Console.

  You can use them to load the Recovery Console?

  310994 - Obtaining Windows XP Setup boot floppies
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;310994&FR=1&PA=1&SD=HSCH

  You have a few options if you can load the XP Recovery on the computer Console.

  See if you can get your hands on a BartPE CD from this link.  You might be able to use BartPE (a stand-alone XP mini on a CD and run from the bootable CD) which includes scanners virus via plugins and also the program ChkDsk.

  http://www.nu2.nu/pebuilder/

  Check your RAM and hard drive.

  http://www.Memtest86.com/
  http://oca.Microsoft.com/en/windiag.asp

  The manufacturer of the hard drive will have free diagnostic software that is bootable, or can even run in Windows, which will carefully check the status of your hard drive.

  Avira presents a FREE data recovery rescue CD
  http://www.Avira.com/en/company_news/rescue_cd_.html

  Avira AntiVir Rescue System
  The Avira AntiVir Rescue System a linux application that allows access to computers that cannot be started more. Thus, it is possible to repair a damaged system, to save data or to scan the system for virus infections. Simply double-click the package of rescue system to burn it to a CD/DVD. You can then use that disc to start your computer. The Avira AntiVir Rescue System is updated several times a day, while the latest security updates are always available.

  Avira AntiVir Rescue System
  http://www.Avira.com/en/support/support_downloads.html

• InCD locker 'reader' could not be initialized. InCD cannot start. NBHGui InCD support is present but could not start. InCD cannot start.

  at the start of my computer: these two windows appear indicating "InCD cannot start.

  InCD is the former writing Nero software. It does not work. Uninstall from Add/Remove programs. If you've never used, leave it uninstalled as it is problematic anyway. MS - MVP - Elephant Boy computers - don't panic!

• Cannot start gives cs6 adobe dreamweaver (0X0c000007b) error.application will not start

  After a successful installation of the CS6 Dreanweaver. when I start it it gives the following error error.application (0X0c000007b) cannot start.

  solved

• & quot; cannot start... side-by-side configuration is incorrect"

  Vista Ultimate 32 bit running. When I try to start DW CS4 or Fireworks CS4 I get the following message appears:
  "The application failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details. »
  Check the event log entry says this:
  "Activation context generation failed for"E:\Adobe\Adobe Dreamweaver CS4\Dreamweaver.exe". Assembly Microsoft.VC80.MFC, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type ="wi n32', version = '8.0.50727.762' was not found." Use sxstrace.exe for detailed diagnosis. »
  
  I found a few KB articles, which proposed to install the VC ++ 2005 runtime, which I did, and the other the VC ++ 2008 runtime, I did also. No joy.
  
  Curiously, all applications not related to the Web in Design Premium I have tested work. I can run PS, AI, ID, bridge, Acrobat Pro, etc. But DW, Fireworks, and Flash Pro embark.
  
  I Googled it, nothing helps. When I try to run a search of forum on the topic I get a server error asking me to contact the site administrator. Right.
  
  Anyone have any ideas?
  
  see you soon,
  Scott

  OK, just for the record, this problem has been resolved. After trying several solutions without success, I deleted Visual Studio 2008 Standard completely. Still no joy from three applications not mentioned. So, I used the available uninstall from Vista and features dialogue and uninstalled programs only three Design Premium apps that have been barfing on the question of VC80. Then I reinstalled the VS2008 first all running times expected would be in place, then finally reinstalled three already uninstalled apps.

  The hope was that this would persuade the Installer do a reissue of links was required for different Visual C++ libraries that have been involved in the issue. Apparently, it was all that was necessary, because all three of these formerly recalcitrant requests are now functional.

  see you soon,
  Scott

• Cannot start application error: getlogicalprocessor procedure entry point information is not found? ... could not be located in the library links file kernel32.dll Dynamics

  Original title: I had the problem that revger.exe and kernal32.dll

  When I run any application on my system, I get an error kernel32 below is an example:

  The procedure entry point processor information get logicasl is not found in KERNEL32.dll dynamic link library.

  Hi Rajeshlenka,

  You did changes to the computer before the show?

  Try to start the computer in safe mode. If the issue is not persists check safe mode if the problem persists in the boot.

  Step 1: Safe Mode

  See the following site:

  A description of the options to start in Windows XP Mode

  http://support.microsoft.com/kb/315222.

  Step 2: Clean boot

  See the following site:

  How to configure Windows XP to start in a "clean boot" State

  http://support.microsoft.com/kb/310353.

  Note: To set the computer back to start normally, use the procedure How to configure Windows to use a Normal startup state in the same page.

   

• Cannot start Windows Mail because "file MSOE. DLL could not be loaded. " System files corrupted...

  I have problems starting Windows Mail because «file MSOE.» DLL could not be loaded. " I ran the SFC function, and after checking my file system, he said there was some corrupted files, and some of them could not be fixed.

  Any suggestions on what I might try next?

  Thanks in advance for your help.

  Hello

  Make sure that Windows Mail is not running - check the Task Manager - right click on taskbar - task manager

  Download WMUtil - SAVE - DECOMPRESS go to where you put - it - right click RUN AS ADMIN

  http://www.oehelp.com/WMUtil/

  Check #3 and WinMail commentary by the author of WMUtil
  http://www.oehelp.com/OETips.aspx#3

  More expert here:

  Discussions in microsoft.public.windows.vista.mail
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Windows.Vista.mail&cat=en_us_fdf138d6-427A-48D6-84dc-a91a6c9fbb45&lang=en&CR=us

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows XP restarts all the time; does not start mode safe mode and last known Configuration does not work either

  Hello! Recently, I installed Wubiand appreciates well. However, a few days ago, when I tried to boot XP on my netbook (EEE PC 1005hab), it restarts just constantly return to the selection screen of the BONES. I tried Safe Mode and last good Configuration known with anything will do. What should I do now? Ubuntu has not stopped working suddenly, so I can't access my data.

  I don't have to have a Windows XP CD, there is something weird Asus recovery instead. In addition, it is a netbook so I don't have an optical drive to run the recovery CD. I'm doing a Livecd of Linux USB so I can back up my data... but I can do but reinstall at this point?

  Thank you.

  The afflicted system has a working CD/DVD drive (even an external).

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must call Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu, it has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start pressing the F8 key with more urgency (earlier and more frequently) until you see disable automatic restarts on system failure, and then select it.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Cannot open the Windows Gallery with error message: "you may not have enough space on your hard drive or critical files may be lack of Windows.

  Original title: Windows Photo Gallery problems

  I have a problem trying to open Windows Photo Gallery, when I click on the program tab I get an error message saying: Photo Gallery cannot start. You can have enough space on your hard drive or critical files may be lack of Windows.

  • NO Mahesh B G , is not windows live photo gallery, windows photo gallery & is the message I get "could not open the Windows Gallery with error message: 'You may not have enough space on your hard drive or critical files may be lack of Windows'." Thank you Dave 07/11/2012

  Hi David,

  1. have you made changes on the computer before this problem?
  2. are you referring to the Windows Live Photo Gallery?

  Please follow the methods and mark the question below:

  Method 1:

  Fixed problems with Windows Live Photo Gallery that does not:
  http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/

  Method 2:

  You need perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot State, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 7 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  I hope this helps.

• Cannot start without see BSOD... not even in safe mode

  My question regarding lvl4-disp display driver gel and screen BSOD answered by someone on this forum.
  Followed the instructions to uninstall the graphics card and reinstall the drivers... it worked for awhile but froze again and BSOD with even. error message
  I did a scan before the accident and all systems and transmitted material.

  I tried to repeat the above, but this time the BSOD come immediately.  I tried several times and cannot get past the BSOD.

  When my problem appeared all first, I called a local computer store and they told me what they would do was to reinstall Windows XP.

  I have original XP discs delivered with Dell computer and driver disk.  It would be the best solution to this persistent problem?
  If Yes, what is the best way to go about this?

  Thanks for your help.

  Toni

  Hey Toni,.

  If you want to reinstall Windows XP and then discover the inforamtion on this Web page: http://www.pcworld.com/article/129977/how_to_reinstall_windows_xp.html