XP PRO WITHOUT ACKNOWLEDGING MY 500 GB HARD DRIVE ONLY SEE 137 GB. I USE SP3.

Similar Questions

• I want to clone my original equipment existing 500 GB HARD drive to a new 1 TB HARD drive replacement. How?

  G ' Day,.

  I'm getting too big for my old 500 GB HARD drive, so I bought a new 1 TB HARD drive.

  Now I have all of the rescue disks that I made when I first got my laptop Compaq Presario CQ57-105TU . I could use them & fresh install all software & original OS, but then I have to start from scratch and re-install all the software I have installed, in addition to redo all adjustments & changes I made to the Windows 7 operating system since the first day - a year ago.

  Not really how I want to spend the next week or two around.

  I would like to clone the orig 500 GB HDD & all of its content to a new 1 TB of HARD drive.

  Sounds like where I want to go, but for 1 small question. I heard that if I just I'll have about 500 GB of space available new but I was also told that I will not be able to create new partitions of disk on the new HARD drive because of any existing partitions on the original HARD disk are created.

  1. is this true?

  2. in the case, where can I find a failsafe procedure to accomplish the clone, & then create 2 new partitions to cover the free space on the new drive.

  3. If so, is there a work around? If there is what is the procedure (plse give me cramps of brain with the jargon of techno... tnx)

  Some additional information that might be important.

  At the present time, my HARD drive has this configuration:

  

  Now that (Q) Local drive is diferent.  It shows 0 bytes available & 0 bytes used, & I don't have access to it.

  Computer of my wife... another laptop CQ62 model... also has the same drive,

  but hers is labeled as Microsoft Office 2010 Starter... as 0 bytes available & used - also no access, & as below, not showing is not in Dmgt.

  This drive does not appear in my Configuration of MANAGEMENT OF RECORDS : http://i.imgur.com/r4LPrDa.jpg

  Thanks for your time & consideration... Bobby

  Him early bird gets the worm, but the second mouse gets the cheese

  OK...'s done it!

  I used my CLONING HDD DOCKING STATION friends exactly like this, but he bought from a different seller 2 years ago.

  All I did was take my 500 GB drive original & placed in A slot (the front slot - Master) & I placed the new Toshiba 1 TB disk in slot B (the second slot behind Slot A... Middle - Slave). I turned the power on the box. I waited until readers spun & were ready, & I don't have a press the red button on the box...

  25% light started to blink & cloning began...

  About 40 minutes later 50% light began to Flash & the 25% brightness has remained stable.

  This means that 25%of the process has been done, & he went to 50%. .

  This sequence was continued until finally all the lights were on fixed (25% to 100%) which means that the clone was complete.

  I think it took about 2 hours and 15 minutes to clone completely.

  I closed the box power off. Then, I removed the two discs.

  I installed the new drive in the laptop carefully, & reinserted the battery, & I plugged power/charger/adapter sector of the laptop.

  Then, I ran into my fingers & press work / laptop computer shutdown.

  A few seconds my laptop has been as always to initialize.  I just had to check to make sure that I have installed the new drive... & Yes the one on the desk was the original, no doubt which means that my laptop startup disk was indeed the new drive I cloned just to.

  My laptop is started without fault!  without a hitch. Just as he always had.

  I used my computer management Administrative tool - disk management & made a simple volume for the 450 + GB of free space, affecting the next letter available player - in my car (F) case & I named it so.

  Everything worked perfectly, I can read & write on the new partition/volume. As I mentioned previously, I probably won't be able to start from scratch, but my drive (C), but it's fine for me.

  So, what have I learned?

  Well, first of all, my Compaq Presario CQ57-105TU can go to 1 TB of HARD drive without modification.

  Using the cloning method, I did no doubt saved full at least 1 weeks of resettlement work if I selected the new installation method using backup/rescue disks when the computer was first, I created started way back when.

  Outside the 2 + hours time, it took to clone the drive, 15 +/-minutes initially to remove & reinstall the drive, & the time it took to assign the new free space a drive letter (every 5-10 minutes) the procedure was clearly simple cut, I know could have been done differently, but not as simply as the method I chose.

  Pepe, thank you much for the time you spent researching my issues & responding to my message.

  I'm so glad all your fears & roadblocks have been made not, & in the end, it was possible to accomplish the task against our initial concerns - count in a very loose way with the greatest ease.

  Here are some pictures of the Station of Clone (the box) exactly like the one I used:

  

  

  Congratulations to all,

  Bobby, alias DreamRyderX

• Qosmio G30 - RAID may not reflect new 500 GB HARD drive

  I have installed 2 new identical 500 GB hard in my Qosmio G30 with Windows XP.

  The system works well, but the disc cannot be mirrored. Report of the Raid Controller is 'Normal Operation status.

  This disk cannot be used for mirroring because it is outside the management of the RAID."

  Who can tell me whether it is a disc error or is the drive of 500 GB to big for the toshiba with Windows XP raid controller?

  > Can anyone tell me if it of a disc error, or is the drive of 500 GB to big for the toshiba with Windows XP raid controller?

  Hmm. I m not very good, but it could be possible that the 500 GB HARD drive is too big for the mirroring of the mode.

  But have you tried to change the mode in comforter Toshiba RAID you might find in Toshiba Assist-> Protect Fix & -> RAID Console

  Check if you can switch to the mirroring.

  By the way; RAID-1 is defined in the BIOS?
  Usually, when you use RAID-1 configuration, the RAID is set to mirroring. In this case, the operating system recognizes the reduced ability to both hard drives (in your case, it is not important since you are using the two 500 GB HDD).

  Check it!

• Desktop PC's processor HP 251 - a11, Windows 10, AMD quad core A6-6310 accelerated with 4 GB memory DDR3 system and 500 GB hard drive. I installed I tunes last version and cannot operate.  Error message says Hello not activated.  Tells me to

  Desktop PC's processor HP 251 - a11, Windows 10, AMD quad core A6-6310 accelerated with 4 GB memory DDR3 system and 500 GB hard drive. I installed I tunes last version and cannot operate.  Error message says Hello not activated.  Tells me to go to the Control Panel then administrative tools and allow to Hello.  I followed these instructions, but I can't activate Hello.  What did wrong and how I can activate the Hello?  My email is * any help is greatly appreciated

  < email published by host >

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Is it possible to change the 500 GB HARD drive with an SSD on my HP Pavilion MS228sc?

  I wonder if it is possible to change the 500 GB HARD drive with an SSD on my HP Pavilion MS228sc?

  If 'yes', I guess I have to go for a SATA SSD if there is. But I have to worry about other specs?

  If 'Yes'... what could be.

  I googled my question but no answers... so I ty Wizzards :-) Forum

  @Lord_Nikon

  In fact, this is not true. As long as he uses a large SSD enough it will be able to use the recovery media. I suggest using a SSD of 256 or 512 GB if budgeted for the upgrade...

  He doesn't have to make a Windows 7 installation USB drive and use the activation key license on the certificate of authenticity from the PC Windows to perform a cleanup to install.

  One of them should be on your PC. The Prodct key is what is needed for installation and activation online.

  

• How to install win xp pro (upgrade verdion) on a new hard drive

  I have a win 95, 98 and xp - pro upgrade disks and would like to know how to install the OS xp - pro, one a new 80 gig hard drive. I run two other computers with win xp - pro. years, I installed win 3.1 and updated for win 95 and win 98 and then then to xp - pro. Are there more recent methods today to install xp - pro on a new hard drive?

  . Are there more recent methods today to install xp - pro on a new hard drive?

  Hello

  There is no change in the installation of Windows XP mode.

  The only thing to do is to put the XP disk in the CD-ROM and follow the on-screen instructions.

  How to install or upgrade Windows XP

  http://support.Microsoft.com/kb/978307

  Kind regards

• How can I get Windows 7 to read RAW hard drives without having to format the hard drive due to important work on this subject?

  Original title: the file format of external hard drive is the RAW and not NTFS. How can I get Windows 7 to read RAW hard drives without having to format the hard drive due to important work on this subject?

  I put the hard drive on an XP and Vista machine and can read the hard drive, but not with Windows 7

  Hi Zling,

  It works on other OS? When did you finally read the disc and with what OS? If you can read the drive and make a backup of the data on this subject, I you suggest to backup the data on the drive and then put it in using the NTFS file system.

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I have Windows 7 with 500 GB hard drive, I have 280 GB free hard disk, but when you try Shrink partition I could get space Shrink as 36 GB only.

  I have Windows 7 with 500 GB hard drive, I have 280 GB free hard disk, but when you try Shrink partition I could get space Shrink as 36 GB only. I've defragged and tried as well... Any suggestion to get more space for the partition.

  I've hit in this partition for a long time.

  I have Windows 7 with 500 GB hard drive, I have 280 GB free hard disk, but when you try Shrink partition I could get space Shrink as 36 GB only. I've defragged and tried as well... Any suggestion to get more space for the partition.

  I've hit in this partition for a long time.

  This is due to files not movable, scattered in open spaces.  Windows Disk Manager has a few limitations... You can use a thrid party as EaseUS Partition Master Free Edition 9.2.2 freeware utility

  Its very easy to use and you can be dragged and resized your drive...

• Why can I not print a PDF without saving it to my hard drive?

  Since I loaded Acrobat Reader DC, I can't print a PDF without first recording on my hard drive.  When I select the print option, it allows you only to save me.

  Ah. I have it. You don't mention that you opened the file in Chrome. Keep in mind, Chrome does not yet use Adobe Reader. It has its own pdf viewer.

• I have Abobe CS2 I bought and legally own. I have an old MacBook Pro who had to have the hard drive replaced. I reinstalled the CS2 software and I can't activated with an authorization code. I need the code to use my order

  I have Abobe CS2 I bought and legally own. I have an old MacBook Pro who had to have the hard drive replaced. I reinstalled the CS2 software and I can't activated with an authorization code. I need the code to use my software. I can't afford a monthly payment with Adobe Cloud. How can I get my software activated so I can use it? Thank you.

  Please follow the steps described in this document - error: "Activation Server unavailable". CS2, Acrobat 7, pass a hearing 3

  Thank you

  Bev

• I have the model of macbook air 2016 with i5 Professor and 8 GB ram... since it's the fastest ssd, but I have not seen all speeds up to now, I want to say is bcz I need to have usb 3.0 USB key or hard drive to see the speed of the ssd to usb 2.0 will work

  I have the model of macbook air 2016 with i5 Professor and 8 GB ram... since it's the fastest ssd, but I have not seen all speeds up to now, I want to say is bcz I need to have usb 3.0 USB key or hard drive to see the speed of the ssd to usb 2.0 will work

  What do you mean, your message is not clear.

• my laptop is dying, I can move my hard drive to another computer and still use vista coa?

  my laptop is dying, I can move my hard drive to another computer and still use vista coa?

  Hello

  It depends on the type of license you have, as to whether you can transfer it or not.

  Pre-installed Licenses OEM (HP, Acer, etc.) and the Microsoft System Builder OEM licenses are tied to the first machine that they are installed on and channels of license when this machine dies.

  OEM licenses are not transferable.

  If you have purchased your own license for sale retail of Windows and installed yourself, yes you can transfer it to another computer.

  Retail licenses are transferable.

  Just be sure that you have only installed on one machine at a time.

  A single license means one Installation.

  And if it is retail and transfer you, in all likelihood will have to reinstall the operating system, as this disc hard the 'old' aura card mother drivers installed, which will cause starting problems.

  See you soon.

• Error hard drive only on reboot

  I get a hard drive only error message when you restart Windows 7.  I have run the test drive twice, and he passed both times.  Is there a way to fix this problem?  If I shur the system down and turn, the problem is usually not, even if it happened a few times.

  Hello

  In the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.

  sfc/scannow                (Note that there is a space between sfc and /)

  Let the entire process, then the output type and press ENTER.

  Then, click on the Start Menu, click computer, left click Local disk C once to highlight, right-click Local disk C and select Properties.  Click the Tools tab and then click on the button "check the drive for errors.  In the next window make sure that both boxes are checked, then click Start.  Part of this process will require a reboot to check the disk.

  Kind regards

  DP - K

• y at - it another program which marks bad sectors on the hard drive, so I can continue to use my hard drive?

  Windows 7 does not support fdisk more is what im saying.  y at - it another program which marks bad sectors on the hard drive, so I can continue to use my hard drive?

  OT:

  Fdisk

  Hello

  Running checkdisk (chkdsk) will mark bad sectors. Utility of these manufacturers
  It will be even better.

  Check the hard disk for errors, health, bad sectors in Windows 7 / 8 / 10
  http://www.thewindowsclub.com/check-your-hard-disk-for-errors-in-Windows

  Bad sectors explained: why hard drives get bad sectors and what you can do about it
  http://www.howtogeek.com/173463/bad-sectors-explained-why-hard-drives-get-bad-sectors-and-what-you-can-do-about-it/

  The manufacturer Diagnostic utilities.

  (The old 302602 links isn't now valid for Diagnostics links).

  Manufacturer diagnostic utilities - run one to your hard drive
  http://www.techsupportforum.com/hardware-support/hard-drive-support/462298-no-IDE-device-found.html

  Corrected list dated 06/09/2010

  Fujitsu hard drives: utility of diagnosis here
  http://www.Fujitsu.com/EMEA/products/HDD/

  Hitachi hard drives: utility of diagnosis here
  http://www.HitachiGST.com/support/downloads/

  IBM hard drives: use Hitachi utility *.

  Toshiba hard drives: use Hitachi or Maxtor utilities

  Maxtor hard drives: Diagnostic Utilities here (now SeaGate)
  http://www.Seagate.com/www/en-us/support/

  Quantum hard drives: use the Maxtor utilities

  Seagate hard drives: here Diagnostic utilities
  http://www.Seagate.com/www/en-us/support/downloads

  Conner hard drives: use the Seagate utilities

  Hard drives Samsung: utility of diagnosis here
  http://www.Samsung.com/global/business/HDD/

  Hard drives Western Digital: utility of diagnosis here
  http://support.wdc.com/product/download.asp?lang=en
  Trial versions of one of these 'might' help.

  SpeedFan
  http://www.almico.com/sfdownload.php

  HD Tune
  http://www.hdtune.com/

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Computer HP laptop slim 500 GB HARD drive: used for HP laptop HARD drive upgraded to Win 10 Pro with key now stuck after HP Drive Encryption Login

  I bought a portable hard drive used HP for the upgrade of my Lenovo G550 with ugraded CPU with Intel's CORE DUO T9300 2.50 ghz

  (HP hard drive: computer laptop slim drive HARD 500 GB SERIAL ATA DISK DRIVE S/N W627S9NL P/N 756731-001 MFG Seagate Technologies DOM 8 / 2015)

  I was happy to see that the hatd drive had already installed because Windows 7 I had bought already separate legitimate Windows 10 Pro license key for the upgrade. I was able to go online and download the upgrade of Windows 10 and used my purchased license key to activate my updated.

  While doing the installation, there are some HP software that was still on the hard drive. I thought it would be good to have some additional security protocols, so I also installed the WinMagic Securedoc Bootloader v1.2.12 and saved the drive encryption HP with the security issues and password for secondary access.

  10 Windows has been activated and everything was beautiful. But when I restarted the laptop, I put my password for windows and then it goes to this screen of disc HP encryption rises. I put the password and it is accepted - and then the screen turns white... not offshore... jblank TEU with a cursor flashing that doesbn can't react to inputs.

  I tried leaving it for a day or so and still nothing.  There is nothing I can change in the configuration of the BIOS that works so far.

  I also tried Reimage download on USB and re-creation of the sequence of boot, but not good. Even tried a boot drive, but nothing there either. I'll try again.

  I don't know where to go or how to get beyond the screen of HP encryption.  I am pretty good at following directions, I don't know coding, but may do what you suggest to help me fix this problem.

  Can you help me?

  Sorry... I missed the part that you have a license Win10.  I thought you were trying to activate 10 using the OEM HP license and causing problems.

  I do not use HP encryption applications - as having recently completed a career in the InfoSec, I personally focus together on the encryption of the PC to be laughable-, but my guess is that you are basically out of luck.

  If it was my drive, I WIPE the drive of all its content and then again install Win10.  A good product to do i.e. DBan: http://tiptopsecurity.com/how-to-securely-wipe-your-hard-drive-with-dban-erase-your-data-for-good/

  Once your disc is clean, then simply install Win10 on it.

  That said, with a bit of luck, one of the HP EXPERTS will probably come along and tell you how to get around their encryption.

  Good luck