Xperia Z5 dual - issue with volume of calls
In every single call, the phone resets the call volume up. I put the volume to the lowest in each call but the phone resets it back to maximum volume in the next call automatically.
It's a nuisance terrible to reduce the volume of each time and my ear hurts bad now. If I reduce the volume every time, the first or the two sounds are always strong before the reduction in volume.
In my view, there is a 3rd party involved Soft. I don't know not facebook messenger restores the volume to the lowest after each call, so in your case, you have to start in safe mode and check.
Tags: Sony Phones
Similar Questions
-
Anyone know of any compatibility issues with Windows 8 and RV series routers?
I have a small network with a laptop computer, Windows 8, Windows XP desktop computer and a network MyBookLiveDuo storage device. I have sharing enabled between these devices. Everything worked well on a network switch. I replaced the switch with the RV110W VPN Firewall Router to add better security to my network before I have expand it. Since then, I have a laptop Windows 8 intermittent connectivity while the connectivity of the XP desktop computer shows no problem.
On the laptop Windows 8 I ran network troubleshooting, and he complained that two devices on the network are (NAT) network address translation and the symptoms he describes is what I see. Problem is that I don't have a network Analyzer to look at the network in more depth. I looked online for the RV110W documentation and if NAT is listed as one of the characteristics, there is no discussion in the documentation on how to manage this feature in the router.
I can connect to the Windows 8 laptop from Office XP and access shared content. I can connect to the Duo since Office XP without difficulty. However, except when they reappear periodically under the heading of my network in Explorer on the laptop Windows 8, I can't access the Office XP or the Duo of the laptop Windows 8. Curiously, however, I have a part of the Duo mapped as a network drive on the laptop Windows 8 and I can access it even when everything else has gone. Also, the interface of management for the Duo appears on the laptop Windows 8 and I can access the Duo to manage. Only, I can't access the shares on the Duo. Then all of a sudden they reappear under network in the file Explorer and I can then access. I think it must have to do with NAT, but I can't find anything out about it.
If it's something I can turn on the router long enough to see if the problem goes away I would like to try, but I can't find it in the documentation, and I can't find it when I look aroiund in the management interface.
The fact that I am not having the form of the XP desktop computer problem makes me think that a compatibility issue with Windows 8. Does anyone know if Windows 8 did anything with NAT? I try to get help from Microsoft Technical Support, but their level 1 tech told me to call Tech Support Pro when they open later this morning. Support cat Cisco won't open until Monday at 09:00.
Also, throughout this connection problem Internet from the laptop through the router is never interrupted. It's strictly connectivity with other devices on the internal network that comes and goes.
Hi Gregg,
NAT must not play unless your applications on the internet. The "port Internet" or "WAN port" is a NAT port that converts your public IP address from ISP to your LAN subnet addresses. NAT allows multiple computers on a network to use 1 public IP address.
If your devices are connected to the Ether "LAN ports" they are not affected by NAT unless they are Web applications. 4 'LAN ports"are 2 layer switch ports. This means that all local requests are forwarded by the switch ports.
This device did replace exactly? The XP computers, DUET and window 8, make these products using the static IP address or you allow the RV110 to assign an IP address automatically? What IP address you are using on the LAN of the RV110?
-Tom
Please mark replied messages useful -
Installation of Microsoft Windows need to run Microsoft 'Access', which is not available to OX. Until I try to install OX 10.0.2 does anyone know if it supports the dual boot with BootCamp or similar? Thank you!
Boot Camp creates a Windows partition on the internal disk and allows the computer to be switched between Mac OS X and Windows, but not to have two OS running at the same time. make products such as VirtualBox.
(144961)
-
Huawei P9 - I have many issues with getting my pictures from the phone to my Imac
Huawei P9 - I have many issues with getting my pictures from the phone to iphoto on my Mac.
Before the summer I bought a Huawei P9 phone, I can easily see the photos on the phone - I can't just them on my mac. When I connect via a USB cable, it refuses my permissions.
I try to use my Google account to view on the Mac and move the iPhoto - I can't work either! I can see them, I can't move them!
I'm pulling my hair out and I have enough to do with! Help, please...
Jim Hosking
You need the phone provider support - there is a problem with the way their phone works and how to use it and has nothing to do with the Photos or iPhoto - if pictures is consistent with standards of good Photos and iPhoto won't work with it
You may need special third party software for your phone load in Photos or iPhoto
LN
-
I've recently been updated automatically to FF 16.0.2. After noticing another boring change today, I would like this option is disabled because I find it cumbersome. When you open tabs, there is a sticker or a page on the view that is displayed. Kind of Google as the fact with a cached page to see what's on the page before clicking on it. I don't mind not with google but with FF, I do. Can someone shed light on how to disable this feature with FF?
If it is not with FF, so what is it with and actually called?
Here is a picture of what I am referring. This quick view of pop - up appears on each tab that you open.
Picture link
http://img441.imageshack.us/img441/6023/image1kdz.jpg
Thank youStart Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).
- Do not click on the reset button on the start safe mode window or make changes.
-
iPod Touch 5 Gen - iOS 9.3.1 lightning connector issues - with accessories
Has anyone seen a problem using iOS 9.3.1 on an iPod Touch 5th generation with lightning connector devices? Specifically, I use the iPod in a cradle of scanner which connects via the connector of the lightning, until iOS 9.3.1 the cradle was visible to the application, but once it has been updated the scanner loses communication to the iOS device and application. IPod charge and connect to iTunes, no problem, but refuses to see the cradle, I have another iPod on an older version of iOS, which connects to the cradle even without problem.
To try to find, I've updated the iOS to 9.3.2 beta fault from the site of the developer, this problem has now fixed the issue with the cradle. I can't that assume Apple broke the connection in iOS 9.3.1?
Sometimes an iOS update breaks compatibility with accessories. Since then, he has worked with next beta which seems to be the cause.
All yo can do is to continue using the beta until the version is rejected in the pubis.
Have reported the problem to Apple to ensure that the beta version is not yet revised to cause the same problem?
-
24 b017c: 24 - b017c dual boot with Win7 possible?
The b017c is capable of running WIN7 pro in anyway shape?
I really need to do a system dual boot with WIN7 If Yes. WIN10 is not be nice to some specific software Attorney that I need to have to work for a client. Win7 is the latest OS, this software is compatible with before an upgrade of expensive software can't be compatible with Win8 or higher (we're talking $1000-2000 range).
I tried to install WIN7 on this computer after the partitioning of the disk space, and put out several settings in the bios (I had error btw), but WIN7 keeps hanging in the first screen after loading the drivers (language selection screen). Something happens where ports USB closing killing all connections to the mouse and keyboard. I have tried many changes in the bios settings and a retry of the WIN7 Installer (from an installation disc) but no dice.
Is there a certain combination of settings that must be disabled in the bios to get the win7 Installer right or I'm screwed?
Thanks for any help
What an adventure!
As you discovered, you must completely format the drive as one or the other (GPT or MBR). You cannot format a GPT partition and the other in the MBR.
I wonder if you had back and disabled the legacy mode, if W7 would let you install on the GPT - or partition if the disabling legacy mode would also have permitted secure boot.
In any case, it's water under the bridge.
Drivers... Here are some that may work...
First install the driver from the Intel chipset and restart the PC. A 2nd on the left is the automatic installation file.
See if this graphics driver works... 3rd one down on the left is the automatic installation file.
Audio: Accept the agreement. Download and install the 2nd driver on the list.
Ethernet: Download, unzip and install the 2nd driver on the list.
Card reader: download, unzip and install the driver from the 1st on the list.
Wireless: 2nd pilot down on the left.
Bluetooth: 2nd one down on the left.
-
Satellite U940 PSU6VA - Dual boot with Ubuntu based distributions
_ * My specifications: * _
* Model: * Toshiba Ultrabook (Satellite PSU6VA - 00S 002 U940)
* Operating system: * Windows 8.1 x 64 (upgrade of Windows 8 x 64)I would like to set up my computer to dual boot with Windows 8.1 (x 64) and Zorin OS 9.1 (64-bit).
ZORIN OS is a derivative of Ubuntu which maintains a binary compatibility with Ubuntu i.e. Ubuntu and Zorin use the same drivers and can run the same applications. John Damascene is more or less just Ubuntu with a different desktop environment and some additional preinstalled applications.
So far, I know that I need to disable the QuickStart Windows 8.1. What I have to do something else (for example disable Secure Boot, CSM, etc.)?
In addition, my Ultrabook comes with 2 hard drives: 500 GB HARD drive and a 30 GB SSD. Windows uses the HARD disk for storage and for implementing SSD caching, through technology Intel Rapid Storage Technology. Is it possible to set up John of Damascus to do so (preferably without disabling caching on Windows)?
NOTE: I prefer to do things using graphical interfaces, rather than the CLI. I don't mind given CLI instructions; also just showed me the GUI equivalents if possible. I use the CLI if there is no alternative.
Post edited by: Justinian
Hello
See my responses / comments among your questions (I took part of your message and inserted here):
So far, I know that I need to disable the QuickStart Windows 8.1. What I have to do something else (for example disable Secure Boot, CSM, etc.)?
Answer: If you want to dual-boot, do NOT select WSC as preventing Windows to start.
You shouldn't have to disable startup secure either, but I can't promise that. I think that Ubuntu 14 has support for secure boot.In addition, my Ultrabook comes with 2 hard drives: 500 GB HARD drive and a 30 GB SSD. Windows uses the HARD disk for storage and for implementing SSD caching, through technology Intel Rapid Storage Technology. Is it possible to set up John of Damascus to do so (preferably without disabling caching on Windows)?
Answer: No, I don't think that there is a way to use the SSD in Zorin without making it unusable for Windows.
Suggestion - let it be.Tom BR
-
Satellite C850 - 19(d) - I want to do a dual boot with Linux and Win 8
Last week I had a Satellite C85O - PSCBWE-03200WGR 19(d)
Yesterday, I try to make a dual boot with Ubuntu.
I do not have a start to boot from USB, or iso CD (same choices as for the Toshiba application), and I did one on the bios:
-Disable secure boot
-Change UEFI CSM support
-SaveOn reboot, I get not Toshiba logo, but a black screen with:
«This product is covered by one or more of the following patents:...» (list of patents...)
Realtek...
PXE - E61: Media test faliure check cable
PXE - MOF: Exit PXE ROM
"No boot device - insert boot and press a key.I can't open the Bios again at F2.
Which I recover the system?
Hello
The unit has been pre-installed with Win 8 64 bit right?
Change BIOS setting of UEFI to CSM and disabling secure boot prevent Notepad to start 8 to win!
That's why the device cannot find the boot device and passes to the last option: LAN.
But given that the laptop can not find bootable system via LAN, the error PXE - E61: Media test faliure check cable appears.If you want to use a dual boot, you will need to boot into Win 8
Win 8 you must create a partition for installing Linux. This can be down in Win 8 disk management. It must reduce a last partition and have to create new free space available.Now to start installing Linux you need support... you can burn the iso on DVD or a USB bootable Linux. There are a lot of details on the internet how to create these media.
Once you have created the bootable USB key, restart your PC with USB connected.
Press F12 for the boot menu. Now you should see the key USB (if it is bootable!) choose USB and you should be able to install Linux (Ubuntu is great!)Here's a nice page that would provide the statement all step by step!
http://www.intowindows.com/dual-boot-Windows-8-and-Ubuntu/ -
Satellite L305-S5939 - Dual boot with Linux
I recently bought the notebook title mentioned for my studies in computer programming that will require me to dual boot with Linux.
I decided to use Ubuntu and their instructions for upward the dual boot parameters are simple.However, I heard from people having problems with the settings of the BIOS on other brands when said is finished.
Before I embark on this journey, I want to just make sure that everything is set to avoid problems.Unfortunately, I have not found much information about Dual boot with Linux and Toshiba L305s.
Other than the basic principles of what I need to do before installing?I think that a dual boot on the Satellite L305 should not be a problem because you can do it on every laptop or PC.
If you want Ubuntu you should take a look on Wubi
http://wubi-Installer.org/
It of pretty easy to use and in my opinion the best way to install Ubuntu on a system dual boot. -
How to create a dual boot with Vista installed on my Satellite U400?
Hello
I just bought a U400 - 17 H with vista installed on the HARD drive. I would like to create a dual boot with XP Pro.
I have only a drive HARD aleady with 2 partitions (1 for vista) + 1 for data.
I want to cut the partition vista in two 2 pieces to install XP Pro.
At the end I'll have 3 partitions 1 vista (65 MB), 1 xp (65 MB) and 1 data (125 MB).Is it easily to create a new partition ok (I guess only on vista)
but is there a program dedicated to install another OS and create a dual boot.Please help me because I like many things the other way around. I'm sure it's possible, but what are the right process to have at the end of two BONES and the choice at the start of the laptop
Thank you
GerardHello!
Create a new partition for Windows XP and install it. There is no problem.
After that, you need to restore the Windows Vista boot loader. You can do this with EasyBCD. Install and start the program.
Go to the tab "Add/Remove entries". You will see that there is only one option available in the bootloader of Vista at the moment. In the "Add an entry" section, replace the drive in the menu drop-down of C:\ E:\. Change Type "Windows NT / 2 k/XP / 2 k 3" and the name of "Microsoft Windows XP". Then click on 'Add an entry' and 'save '.
Then go to the "Manage Bootloader" tab make sure "Reinstall the Vista Bootloader" is selected, then click on "write the MBR.Now you can restart the laptop and you should have a full system dual boot to work.
Good bye
-
Can I do a dual boot with Windows 7?
After taking all the precautions I can think to install Windows 7 on my wifes laptop. Drive recovery system, backups (2 DVDs) and an image I did more than 6 DVD.
I thought why not only reduce the Vista Partition, install Windows 7 in the created partition and run Windows 7 to see if it will work on the laptop (gives me time to straighten out things so that my wife can always use). Then remove the Vista Partition. If the laptop was mine would just reformat the dang thing and deal with what it goes down from there.
Then there is the Question of what to do about the EISA (recovery Partition)?
Hello!
Of course, you can install Windows 7 and do a system to dual-boot with Windows Vista... Why not? ;)
As you have already said if Windows 7 works well on your laptop (I put t know which model you have exactly) you can remove Vista and use the old partition to store data or to include a new in the Windows 7 partition.
The hidden partition do you mean isn't the Toshiba recovery partition! It is a feature of Windows.
You can remove this partition you don t he most needs.In addition, with the Toshiba Recovery disk, you are on the safe side. If you don't want Windows 7 you can go to Vista (factory settings). :)
Good bye
-
Dual boot with Vista-XP on two discs
I just bought A200-S01-PC and I want to dual boot with Windows XP Home edition, Vista is pre installed and I want to install Windows XP Home edition on my second drive, so I can use it for College next year.
I tried to boot from the CD but I get an error saying that it cannot find any installed readers.
Please I need help?
Hello
I don't think you can install OS second on the second HARD drive and I don't really know if this second HDD can be used as a boot device. I really don't know, but you can check it yourself. My A200 has a HARD disk only.
But what you can do for yourself is to install Windows XP Home edition on the second partition of the first HARD drive. There is no problem and I did the same thing on my laptop.
But back to drive HARD invisible. This has nothing to do with the dual-boot. Plese check this thread. You will find nice discussion how to install WXP when the HARD drive is not visible.
Bye and good luck!
-
Satellite Pro L40 - how to make a dual boot with two recovery disks
A small question;
How to dual boot with two recovery disks ive got with my laptop (Satellite Pro L40)discs 1 & 2 are windows vista buisness
discs 3 & 4 are windows xp profesional
Disc 5 is updated the biosThe guy where I bougt garage computer (a metal regular store named expert) says that it is posible with discs tose.
I have
I already have a partition, but when I boot from disks, is not has the option to select a partitionThanks already
> Satellite Pro L40 - how to make a dual boot with two recovery disks?
Short answer: you can't do that. Maybe if you have two hard disks (I tried didn't) but as much as I know your SP L40 has only one.
Ask this smart guy, how to do this. Maybe it's a useful tip. -
Pavilion g6: Atheros connection issues with Arris Modem
Hi, I had the same problem with my laptop and Atheros network card, windows 7, it can not connect to the network with Arris modem but it works with other modems. I downdoaded the driver from the link you provided here, and it worked, my laptop connected to the network without problems, but after a month it stopped connecting to the network, I downloaded the driver again, but it did not work.
Hello and thanks for posting back. Here is a link to a solution to problems of common connection to the problems of Atheros WLAN Driver and connection.
Please let me know how things are going. Thanks again for posting and have a great day.
Maybe you are looking for
-
The migration profile of Firefox to Firefox Developer edition?
Coz it doesn't look like that much the same structure, or?Thank you
-
What do I do about this error? -Server does not support the RFC 5746, see CVE-2009-3555
I get this message to both cox.pop and a verizon.pop of serversWhen it occurs, TB connects and he's there, without having to download the messages. I can send them however.It is an intermittent problem. It is not always the case. Thank you in advance
-
Satellite C665 - unsigned drivers Win 7?
Have a c665 (Win 7 64-bit) that does not recognize the WLAN drivers or graphics, saying the signatures cannot be verified. They WILL work if I select "Disable driver signature enforcement" in the F8 (start) menu.they do not work if I disable permanen
-
Satellite L300 - can't watch TV using the connection cable cable with Win 7
Hello I have a problem.I can't watch movies in my Satellite L300 to my cable TV.
-
I have a user within our organization with a strange problem. When you use word, outlook or any application on the Web, often his typewritten letter T triggers tab. As it is to type the tab get triggered when it hits the letter 'T' on the keyboard. T