XPS vs XPS 8900 8910

Similar Questions

• XPS 8910 uses the same motherboard as XPS 8900 (NVME SSD)?

  Does anyone know if the new round of XPS (XPS 8910) uses the same motherboard as the XPS 8900?  I am particularly interested to know if Dell has solved the problem of m2 which has paralysed mainly the use of the connector m2 only 1-way PCIE x instead of 4 x.

  (There are several discussions on this issue, see for example or )

  en.Community.Dell.com/.../19989764

  Need a new motherboard.

  

• How to install the second hard drive in the Dell XPS 8900

  My new Dell XPS 8900 only has a single HH and I would install a second HH.  Probably 3.5 SATA internal a 2 T.  I need a repair of XPS 8900 so that I know how to install the second disk.  I just need a few simple instructions so that I know how attached a data cable SATA and do the go by car.  Direction will be appreciated.

  You will need the drive AND a data cable.  The manual is here:

  www.Dell.com/.../manuals

• AHCI disabled on desktop XPS 8900

  I installed a new Samsung 500 gb SSD 850 EVO in my new XPS 8900 to my boot drive. When I select AHCI in the BIOS to work with my SSD, I get a message INACCESSIBLE_BOOT_DEVICE. After some research, it seems that AHCI is disabled and only the RAID is available. In order to optimize my SSD, I need AHCI enabled. How do I do that?

  Here's a post on another forum-

  Activate the AHCI after installing Windows

  You can also do a search on Google for the words there are other methods involving the modification of the registry. You can also reinstall Windows and update the UEFI before you start the reinstallation.

• Compatibility M.2 SanDisk SSD X 400 with new XPS 8900 and cloning issues

  I just got a new 8900 XPS running and ordered a Sandisk X 400 1 TB SATA III M.2 drive for her.  I know, adding that a PCIE SSD with adapter would be much faster.  But I'm not a gamer and concentrate more on edge backup and storage.  And the new Sandisk card gets good reviews and should give a nice speed boost.  This will be my first attempt at cloning of a new boot disk and install an SSD.  I went through the forum and found some good information.  A few questions...

  One of the sons said that an SSD with the B and M keys (like this one) may not work.  Searching the Web I found no comments from anyone who has tried this particular SSD in a new XPS desktop.  No compatibility issues?

  Another thread has been posted problems with starting the XPS 8900, when you add a new disk, but the updated BIOS to 2.1.3 seemed to be the solution.  I confirmed that my machine already has this version of BIOS.  Once again, any concerns?

  My plan is to clone again SSD in the computer using Acronis or other software, then set as the boot drive in BIOS.  Is there a reason to delete the operating system of the C: drive, thereafter, or can just stay as a backup if problems occur with the SSD?

  I have already installed a few programs including MSOffice 2007 and Windows Essentials, so I can use the machine, but otherwise it is always very clean.  When I do the clone will be these OK execution since the SSD without much messing around?  And they will have to be uninstalled from the HARD drive?

  Thank you!

  X 8900-2508BLK
  I7-6700 / 3.4 GHz
  16 MB of RAM
  1 TB HARD DRIVE

  I'll answer some of my own questions.  The M400 Sandisk SSD drive arrived today and I found a screw M2x4 at Ace Hardware to install it with.  Installation was super simple.  I used a pair of pliers to hold the small screws in place and then a Jewelers screwdriver to fix it.

  He seemed to take more time for the first start that made me nervous, but all loaded without any problems.  I rebooted and that you press F2 to get into the BIOS and the new SSD was there!  And then let the computer loads Windows and checked Device Manager and it's still there!

  As expected the reader not yet appear in Windows because it was not formatted.  I used under Computer Management disk management to initialize the disk.  And now I have a new drive I: 935 GB free.

  So far so good.  Seems like the M400 Sandisk should work perfectly.

  Next step is to clone.  Always blazing new territory for me... when the drive is cloned it will remain I: or it will be C:?

• XPS 8900, enable Stereo Mix solved

  My new 8900 XPS does not seem to turn on the stereo mix. I can't save its course towards the speakers. There must be a way to do this. I noticed that the Device Manager shows "Realtek High Definition Audio" under "audio, video and game controllers". My last computer was this driver and it allowed the stereo mix. Any ideas as to how this feature can be enabled on the XPS 8900?

  Thank you

  I have not installed 10, but that's what I have on the Optiplex 9020 = 7

  * Right-click on the taskbar, the icon of Sound speakers headphones
  * Click on recording devices
  * Right click on the white area
  * Check all the
  * Look for wave Out Mix/Stereo Mix / what you mean
  * Right click on one you see and select enable
  * With your still selected, click the set as default at the bottom

• Brand new XPS 8900 Win 10 won't turn on, flashes yellow 2 times power made a break of 7 times pauses then resumes.

  Brand new XPS 8900 Win 10 won't turn on, flashes yellow 2 times power made a break of 7 times pauses then resumes.

  I've not seen a chart explaining flashing power on the 8900 XPS button codes. And there is nothing in the Manual.

  You need to contact Dell tech support immediately. You have 21 days from the date of billing (no delivery date) to pick them up. And then you can order another.

  Otherwise, technical support should work with you to solve the problem under warranty on this system.

  If you are comfortable working inside the case, it is possible that something got its place potted during shipping. Then you can try reseating the RAM and PCI-e cards modules and cables between motherboard and drives and connection etc. Don't forget to read the instructions on the inside of your PC use in the manual before opening the case.

• Updates for the SSD of 32 GB LITEON m2 on a special edition of Dell XPS-8900.

  Has anyone successfully upgraded Cache SSD m2 on their system XPS-8900?

  I have a Dell XPS-8900 that I bought a few months ago, and you want to update the cache of hard drive SSD m2.  The system has 2 to 7200 RPM hard drive + Cache SSD of 32 GB m2, 16 GB of memory (which I'm upgrading to 32 GB) and the processor i7 - 6700 k.

  I tried to replace it with either the Samsung 850 EVO m2 250 GB SSD or the Samsung 950 PRO NVMe 256 GB SSD.  I read in another post on the forum that the limit for XPS-8900 in the m2 slot was 256 GB.  Anyone know if this is correct?

  If anyone has any ideas on how I can change my system to tighten a bit more performance out of my system, I'd greatly appreciate your ideas.  It seems a little slow at startup and loading applications than I expected.

  It is not necessary to install a larger disk for use as a cache - it won't do much (if any) for performance.  There is a valid argument by replacing the disk cache with an SSD of larger m2 and then by installing the operating system on this drive (that is, running in native mode of SSD).  That WILL stimulate the acceptable performance.

  I doubt that there is a limit on the capacity of the drive - but there is no doubt about the physical size of the map itself.  Note that this system is NOT wired with an interface of PCIe 4 ways - then install a player is not worth the extra cost, because it will be limited by the design of the motherboard.

• Update hard disc on the special edition of Dell XPS-8900

  Hello, I have a Dell XPS-8900 that I bought a few months ago, and you want to upgrade the hard drive.  There to 2, 7200 RPM hard drive + Cache SSD of 32 GB m2.  I noticed by looking at the disk management, it has 2 free sheet music; a 39 MB OEM Partition and 11.73 GB recovery Partition.  Both show that they are 100% free.  I created the recovery USB disk and it deleted the recovery Partition files.

  Should I still have the Partition recovery or the OEM Partition?  When I switch to a new hard drive, is it possible to simply copy the partition of the OS?

  Also, I thought that he would have an EFI System Partition.  Is that what I need or installation?

  UEFI allows secure and start for 2 t boot partitions format: those are the two major differences, as well as the withdrawal of the restriction to have four primary partitions per disk.  Those who are not important here.

  I don't think that there is a capacity limit on the m2 in height slot, but there is most likely a limitation of the physical size of the map itself which may restrict your ability.

  You will get the best performance from the system running the operating system for one SSD drive for some.  You can easily find 2.5 "SATA SSD affordable up to 1 t in size now.  Drives 2.5 "tend to be less expensive than m2 format disks, although NVMe readers (whose prices are in the stratosphere), they are largely very reasonable in price for the exception.

  I would not necessarily fear disks 3.5 "Toshiba - these are in large part the designs of Hitachi/HGST (Toshiba entered the market of disk 3,5 '' when WD resumed HGST - the Chinese Government opposed the consolidation to two manufacturers of records based in the United States and forced to WD to spin off plants making the disks 3.5" to Toshiba).  The HGST designs have a good reputation for reliability - much better than those of Seagate, for sure.

  You are probably better off with a straight on the clone of the drive.  You can use the Windows Disk Administrator to change the partitions later.  I had the good luck of late with Macrium Reflect (free), but Acronis image works well - and Samsung provides a free version of it if you choose one of their SSDS.

• XPS 8900 Audio Ports

  I just bought an XPS 8900.  I get audio, but it is not right (front L is much stronger than the rear front R and the back of the subwoofer and a. Center - no sound).  I am trying to hang an Altec Lansing ADA 995 Surround Sound 5.1 with the following sheets: Green - L & R front; Yellow - Center & subwoofer; Black - Rear L & R.  XPS 8900 has 6 ports with icons above them.  Care has the following ports listed in this order and not necessarily with regard to ports (g/d, up/down): subwoofer, line, exit line, mic, surround back outside, one side surround sound.  Port colors and icons are (left to right, top to bottom): gray (2 horizontal speakers face to face with a horizontal line through the two), black (2 vertical speakers opposite each other with a horizontal line between them), orange (2 vertical speakers opposite each other by a vertical line through the two), rose - mic (this one was easy!) , green (2 horizontal speakers opposite each other with a horizontal line through the right speaker), blue (2 horizontal speakers opposite each other with a horizontal line through the left speaker).  Care DO NOT tell you what port is or their color!  I don't know what the icons mean.  LAG in Technical Support was not that geeky.  What do the icons and where I connect what?  Any help is appreciated.

  These are the ports on the back of the XPS 8900. See this.
  Gray = average on surround
  Black = surround back on
  Orange = Subwoofer and Center on
  Pink = Microphone
  Green = output stereo, speakers, headphones
  Blue = stereo line

• XPS 8900 there connector SATA 3 SSD?

  From October 2016, Costco sells a XPS 8900, i7, 16 GB, GeForce GTX745 PC.  Is the motherboard in this PC has a connector SATA 3 that I can use for one SSD SATA I already have?

  Yes.The 8900 has five SATA ports on the motherboard and the power cables in support of three hard drives and two optical drives.

  downloads.Dell.com/.../XPS-8900-desktop_reference guide_en - us.pdf

  Page 12

  List of spec hard drives to 6GBs and optical drives to 3GBs so maybe two SATA ports are SATA II.

• Looking to update the graphics card in my Dell XPS 8900 EVGA GeForce GTX 960.

  I have a Dell XPS 8900 Special Edition that I bought a few months ago. I want to upgrade the OEM GeForce 745 of GTX that it came with an EVGA GTX 960.

  I have the Dell XPS 8900 (processor i7 - 6700 k), 32 GB of memory, 2 TB HDD + SSD of 32 GB m2, monitor cache Dell UP2516D and Windows 10 Pro. I'll add a second monitor Dell UP2516D soon and later add an SSD and move the OS and applications on.

  My needs are not at stake. I mainly business applications (MS-Office, including access and project), finance and investment, and a lot of photo and video editing.  Photo editing software uses the GPU if I update.

  EVGA has suggested either of the following, based on what would be good:

  http://www.EVGA.com/products/product.aspx?PN=04G-P4-1961-KR

  http://www.EVGA.com/products/product.aspx?PN=04G-P4-3963-KR

  These cards are almost identical except;

  #1 is long of 6.8 ", has 1 BIOS, 1 fan and use 128 watts for $160

  #2 is 10.1 "long, has 2 BIOS, 2 fans and consume 160 watts for $170

  I thought I would replace the graphics card myself, but once I opened the folder, I was wondering if the two cards will even fit.  I saw that other people have swapped their graphics card, so it must be possible.

  When I look in my case, the existing graphics card is a single location.  These two cards are double slot.  In addition, it seems that there are a few transistors just next to the existing card.  When you install a card double slot, the new map is just overlap the transistors under?

  Finally, in view of these two cards and the XPS 8900 case, is it possible to put the card in?  Is it worth the extra $ 10 earn an extra BIOS and fan, to the detriment of one more card of time and 12 watts?

  Any help or thoughts are greatly appreciated, thank you.

  Dual cards fit without any problem. Many have improved their 8900 XPS and 8700 with cards that need two slots of width.

  I prefer the models dual fan as they run cooler. They have a bigger heat sink and with relatively low heat from GTX 960, some are silent at idle because the fans do not work.

  For example, MSI GTX 970 son fan only above a certain temp that only happens every game. Maybe the EVGA card did the same thing. It is nice to have a quiet system at idle.

  Regarding the adjustment, the MSI GTX 970 games 4 G card Dimensions are (mm) 140 x 277 x 35. Length and height are tight but it fits without cutting.

  In addition, as noted speedstep you run SATA cables under the card. I replaced the SATA cables with longer cables, so they route toward the front of the box, then under the graphics card and upward.

  This thread has many cards different people have added. (the link is on page 26) and about the halfway point is my son with the MSI GTX 970 system, which (I think) is slightly larger that the EVGA 960 you listed.  It also shows the case mod to add a front fan.

  en.Community.Dell.com/.../19611037

• XPS 8900, use of Nvidia GTX 745

  Hello

  I bought a Dell XPS 8900 with a GTX 745. Should arrive this week.

  Will this DDR3 4 GB Dell OEM Nvidia GeForce GTX 745 c:

  NVIDIA GeForce GTX DVI out--> in--> #1 U2412M DVI DVI to DVI cable = 1920 x 1200

  NVIDIA GeForce GTX out HDMI--> HDMI / DVI--> #2 U2412M in DVI = 1920 x 1200

  Above config works with my old PC (see below).

  Can I add a #3 Monitor VGA input and 3 monitors at the same time?

  ---------------------------------------------------------------------------------------------------------------------

  Old (and always reliable!) XPS 8100 with AMD 5450 can support this with my 2 x U2412M monitors:

  Reference Dell AMD 5450 out DVI--> in--> #1 U2412M DVI DVI to DVI cable = 1920 x 1200

  Reference Dell AMD 5450 out HDMI--> HDMI / DVI--> #2 U2412M in DVI = 1920 x 1200

  Confirmed to work with my new 8900 XPS:

  NVIDIA GeForce GTX 745 out DVI--> in--> #1 U2412M DVI DVI to DVI cable = 1920 x 1200

  NVIDIA GeForce GTX 745 output HDMI--> HDMI Cable DVI--> #2 U2412M in DVI = 1920 x 1200

  NVIDIA GeForce GTX 745 output VGA--> in--> #3 U2211H VGA VGA cable VGA = 1920 x 1080

  Note:

  I did a fresh install of Windows 10 Pro on an SSD that I added and to use.

  Assist support gives me an error "Primary Surface Test cannot operate" with more than one monitor. single monitor flickers during this test.

  It passes all THE tests brilliantly using one monitor with a DVI connection.

  I did more testing on different monitors.

  I guess it's a problem with Support Assist; I can provide more details on request.

  Happy with the purchase!

  :)

• XPS 8900 m2 socket

  I did a lot of reading on this and other forums. I fear, I find myself with more questions that answers, I would install SSD in my slot m2. I understand that it is only a 1 lane slot. I understand that I can install a NVMe in a PCIe interface card and get some whiz-bang performance. At this point, I don't want to spend the $ extra NVMe Samsung 950 pro, but I would use the m2 slot. So how can I put it?

  I see a lot of reports of the SSD Samsung 850 EVO successfully used, but many of these reports do not specify what form factor is used. Then there's the guy who says that you can't use chopsticks B split into the socket split of M. Le SSD Samsung 850 EVO m2 has a slot M and B. Many say that they have done successfully. So here I am scratching my head still wondering what to buy that will work in my decision-making m2. I intend to use the SSD as boot drive and have data backed up on a spinner. I'll do my very specific questions:

  Someone has successfully installed internal SSD from Samsung 850 EVO - 500 GB - M.2 SATA III (MZ-N5E500BW) in their decision-making XPS 8900 m2?

  What other types of boards m2 were installed and successfully used others?

  I guess I'll answer my own question. Successfully, I installed the Samsung 850 EVO - 500 GB - M.2 SATA III internal SSD (MZ-N5E500BW) in my taking of XPS 8900 m2 and currently employs as my boot drive.

• New XPS 8900 with 1 TB of Seagate Barracuda 7200.14 errors

  Bought, new system XPS 8900.  After less than a week, already affected by HARD disk errors.  Checked with Seagate, downloaded the tool so that the updates of the firmware.  None is available.

  Yes, the system is under warranty and support, but the point here, because I hear repetitive as of late problems with faulty Seagate hard drives, I'm not the only one?

  Seagate (1 to) # ST1000DM003-1ER162

  Personally, I always use the WD Black drives.  But that's what gave me.

  Any thoughts or additive?

  -Update-

  After installing an mSATA SSD and try to configure Intel RST to use as cache SSD, I found that the installed version of RST was causing system problems and establishment of acceleration would not occur.

  After a brief visit to the Intel Download Center, I found an update for Rapid Storage v14.8.0.1042.  I installed it without problems, and since all the software and hardware problems have disappeared. Then, I was able to complete the configuration of acceleration for the SSD cache drive.

  In addition, HARD disk errors have also stopped.  I would recommend this updated version.