Laptop HP 62 357 ca HDMI connection

I tried to use my HDMI on my HP 62 357 ca laptop connection. Could not get a picture on my TV LCD of Shap Aquis. Not compatible message receipt. Any suggestion on what to do.

Did you look in the manual of your TV and see what are the accepted resolutions?

See if this utlity detects a video driver later.  Intel Driver Update utility

Tags: HP Desktops

Similar Questions

  • No sound from the laptop to the TV with HDMI connection

    Reference Dell Laptop windows 7 connected to the Samsung 46 '' smart TV with an HDMI cable.  Video works great but no sound on TV.  Is there a setting somewhere that will cause the audio to work from the laptop to the TV via the HDMI cable?

    Right click on the sound icon in the system tray, select playback devices and output of the default value.

    You will need to install an audio HDMI driver for your graphics card if the HDMI output is not displayed...

  • HP laptop Toshiba LCD TV via HDMI connection

    Sometimes, I try to connect my laptop HP G70t for my Toshiba LCD TV. I see that if I close the laptop the TV picture also disappears. What should I do to have the TV be posting video, even when the laptop is closed. Note: I should still be able to use the pout wireless keyboard. Any help?

    When you close your laptop, in that it sets the hiberntation system, the screen turned off, no sound and wireless

    so I think wouldent it would keep putting on TV then, either go into the system setup and set the screen close to the normal running

    no implementation of Hibernate, or keep the laptop open

  • Atrix HDMI to laptop computer Vaio HDMI connection does not

    I adapted my Atrix on the multimedia dock, connected power and then connected to the mm HDMI cable anchor on my laptop Vaio HDMI, I have read and understood the firefox browser should be launched directly, but did not, I missed something?

    By the way, I have the kit multimedia motorola set.

    Advise me please.

    Thank you

    There are few things mingle here:

    1. the webtop is initiated when the Atrix is connected to the HD multimedia dock and the dock is connected to the TV via HD.

    2. the webtop includes the full version of Firefox running a customized version of Ubuntu

    3. connect multimedia dock via HDMI to laptop will not work because this HDMI connection on the laptop, the output not in. Also, why put phone firefox on laptop? Just open firefox on the laptop.

    4. connection from computer to phone via USB will launch all apps on the phone. Which allows to "Motorola Phone Portal" (when USB connected) will cause the computer's browser to open and gives you access to some data of the phone - Contacts, SMS, photos and let you handle these things via the computer.

    5 Motorola has another application - Motorola Media Link; You can download and use to manage music and movies.

    6. If you want to use the webtop application when it is connected to a TV, you can, but it takes the phone to have turned on WiFi or an approved carrier data plan - if you want to use internet applications.

  • I have problems connecting my laptop to the TV with 2 ft HDMI connection. Whenever I try to connect "Windows cannot detect tvwizard2ft.exe" appears.

    tvwizard2ft.exe

    I have problems connecting my laptop to the TV with 2 ft HDMI connection. Whenever I try to connect "Windows cannot detect tvwizard2ft.exe" appears.

    Download and install the latest graphics driver. Visit the website of intel to get that. Once downloaded unzip the file and search for tvwsetup.exe.Run this file.

    You may also download and install .NET Framework 3.0 (SP2)

  • laptop to tv via HDMI connection

    When I cnnect my laptop to my tv via hdmi cable nothing shows... are thereany settngs I need to change or ways about to choose to show on TV? my old office hp on the tv works but can't get my brand new laptop for work.

    Hello @teamkylissa,

    Welcome and thank you for using the HP's Support Forums.  So just to be clear.  When you connect your computer to your new HDMI cable laptop to TV, you get no video on the TV screen.   Well, this is something that I totally understand because it happened to me.  There are a few things to check the extent of setting to go and here is a link that you can check to see if it solves the problem.

    Connect your PC to your TV via HDMI (and more)

    If this is not enough and I hope that he does now.  If you can, please provide me with your information system as much as possible.  Offshore, we can start with your model number and product.  Use this link below to help you find this information.

    How can I find my model number or product number?

    So, I need the operating system that is running your laptop. Here is a link to help you find that information.

    Operating system Windows am I running?

    I hope to hear from you.  If the first link did not help with the other information that I asked for, we would be able to get to the bottom of the matter.

    Thank you and have a nice day.

  • HDMI connection, no signal from the laptop to the TV in Vista

    I was watch videos from my laptop to my tv via the hdmi connection.  I made no changes to any settings on my laptop, but now there is no signal output of my catch hdmi to computers.  That's happened?

    Try this:

    Restore point:

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    Do Safe Mode system restore, if it is impossible to do in Normal Mode.

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    http://www.windowsvistauserguide.com/system_restore.htm

    Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

    See you soon.

    Mick Murphy - Microsoft partner

  • No sound from the HDMI connection Toshiba Bluray player BDX2100

    Hello

    I'm a newbie so I don't know if I'm in the right room or not, I want to ask that I have a Toshiba Blu Ray player model number or to number BDX2100 I have set up my fine reader TV and blu ray.

    There is one thing when I play my TV to HDMI 1 or 2, the image appears but there is no noise at all when I go on the Blu Ray in the audio settings menu it says 2nd audio or something to do with the HDMI is turned off.
    Oh I'm 100% sure and my tv is Sharp Aquos LC-22LE320 is not the TV because when I put the SCART lead in or put it on AV it works fine.

    The only problem is the sound with HDMI connection. If anyone can help, it will be very happy because it has been me bloody crazy.

    -musicman1982

    Hi mate

    It is a Toshiba computer / laptop computer forum.
    You will meet people who want to talk about options for laptops and Toshiba laptops.
    I doubt anyone here would be able to help you with this drive blueray.

    But in your case, I would first check the settings of the TV you.
    Check whether the sound via the HDMI port is enabled.

    > in the settings audio, it says the 2nd audio or something to do with the HDMI is turned off.
    I don't know why 2nd audio is mentioned there but maybe you should check if you can switch this 1 audio (audio main stream) m

    I recommend also consulted this blueray Player user manual.

  • Satellite Pro L770 - how to activate the HDMI connection?

    I have a problem with my HDMI! I connected the HDMI cable to my laptop (L770) and my TV and TV recognized that an HDMI cable is connected. Now, I want to activate the HDMI connection on the laptop with +, but I only have the 4 following posibilities: LCD, LCD + CRT, CRT, LCD + CRT judgements.

    Who could tell me, how do I activate the HDMI? Sould I see a HDMI device in my Device.Manager?

    Thanks 4 your help.
    Tom

    Hello

    Hmm, in some cases the BIOS contains an HDMI output option.
    In your case, I recommend to check this.
    I have not very well if this available but it s m of a value in a control.

    But usually the Fn + F5 should work as described in the user manual... did you check that?

  • Qosmio G50-129 no sound with HDMI connection

    Hello.

    I have a Quosmio G50-129. Recently, I tried plugging it into my Sony Bravia LCD TV via the HDMI connection.
    I have video output but there is no sound on the TV.

    I tried to set the HDMI as audio device as default and the sound level meter in the sound properties panel appears to show activity, but nothing comes out.

    Can anyone help?

    Hello

    I m not Qosmio G50 owner, I only have the small F50, but it must be identical to yours I think. So first of all, I must say that I never had a problem with the HDMI connection. Everything has worked perfectly since I used the HDMI connection, the first time

    In any case, if you connect your laptop to an external monitor or TV using the HDMI connection, connect the cable first. After this power on the TV and select the HDMI input right channel. Then go on your laptop and if you press FN + F5, you can change between the different options.

    Normally the HDMI output is automatically set as the default audio device, not to follow these workarounds with good screenshots:
    http://APS2.toshiba-tro.de/KB0/TSB9401B00001R01.htm

  • TV does not recognize the HDMI connection

    I put Windows XP on my PC instead of Windows 7. I installed so I thought that all the correct drivers but my TV does not recognize a connection when you use an HDMI cable to watch movies via my laptop. I want to be able to drag the window on the tv screen to watch a movie and still use my phone for other things.

    Please help me.

    Hey Buddy,

    Here in the forum there are already a lot of discussion about the HDMI connection. I would recommend checkthing these discussions that might be useful:

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=236993𹷁
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=232961𸸁
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=234457𹏙
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=230999𸙗

  • Satellite program-112 P775: HDMI connection to the TV does not work

    Hello

    For some reason that the HDMI connection between my Toshiba Satellite P775 program-112 to LG TV no longer although he did for some time.

    I tried another laptop without problem.

    I posted the same question some time ago and told to press the Fn and F5 keys, but it did not work.

    Any suggestions please?

    You are right: the FN + F5 switches between the internal and external video output.

    What exactly happens when you press FN + F5? A map falsh menu appears on the screen when you use this key combination?

    On the page of the Toshiba UE driver you can find the Manager command HDMI. This driver is required for your HDMI controller.
    In the case where the output to HDMI does not work, try reinstalling the driver

  • Satellite A-L50-1DF - sound distortion using HDMI connection

    Hi all

    Recently, I bought a new laptop, a Toshiba Satellite L50-A-1DF.

    From the beginning, I experienced problems with the HDMI connection.
    When I connect my laptop to another monitor via HDMI more often than not, the sound is tinny and slightly distorted.

    When I unplug the cable and put it in a few times, most of the time solved the problem.
    I used different HDMI cables and different monitors with the same effect.

    Other laptops work fine with these cables and monitors.
    I reinstalled the drivers to display without a bit of luck and will eventually be sent my laptop in for repair.

    Unfortunately, the problem was not found when they looked at it and I'll it back without a repair.

    I have no idea what could be the problem, because it is not found by the repair team.
    The customer service is unfortunately reluctant to me more help.

    Can anyone think an explanation to this problem?

    Thank you very much in advance for your comments!

    Kind regards
    Natasja

    > I have no idea what could be the problem, because it is not found by the repair team.

    This means that the technician did not notice the sound distortion.
    I think that it s very difficult to solve a problem that is not reproducible.

    In my opinion, you should check exactly when this question appears and must try to reproduce the HDMI sound problem.
    You should concentrate on the audio source and the software that runs when you connect the laptop to the external monitor TV.

    Also I recommend that you perform the tests after the system has been recovered to factory settings.

  • My laptop does not recognize the HDMI cable

    I don't know if I posted this properly, but I would really like for you to tell me a little more about HP pavilion 1 TB of hard drives.

    I bought a HP Pavilion processor with ADM 1 to less than a year ago. There was whisky spilled on it a couple of months before the summer, but I managed to get back to work and it was very good and stil in good shape.

    A few weeks ago, I dropped the laptop from the desktop and it fell on a carpet. Isn't difficult, but not smoothly either. And it is always on when I got it up and working.

    When I stopped it the laptop refused to start. I did a quick diagnosis to check the hard disk and it says already something with red letters.

    I took the laptop PCs store and human a glance told me, the hard drive is dead and I need a new one fitted. "Everything is in good condition", he assumed, and I agree with him to change the hard drive.

    I told him specifically to replace the hard drive with another 1 TB, but he subsequently advised me with good confidence that I was better with a 320 and buy an external hard drive. The laptop will work very well in terms of speed. He mounted in a 320 HARD drive and gave me back my laptop with Windows 7 ultimate.

    Now, the laptop does not connect to HDMI and AMD catalyst is recognized not no matter how many times I install it. And honestly I don't know if the man really had something out of my laptop. The HARD disk he gave in return tells me his Samsung S/N: S34LJ9BG601601648

    ST2000LM003 A REV.

    PN:HN - M201RAD/M 2000 GB + 5v 0.85 A

    Please tell me that it is a HP Pavilion HDD and how can I get the laptop to recognize the HDMI connection on the flat screen TV?

    PS: I checked the amount of space to the new HARD drive that had been installed in and it said 297 GB not 320 GB. Am I missing something? Why can I not see all of the HARD disk if it is 320?

    Sorry for the long discription, I stop here.

    Nope.

    Try this:

    Click on the link below to see how to find your model number...

    Computers how can laptops HP - I find my model number, the serial number or product number?

    Scroll to option 3 to see what to look for an explanation.

    Let me know.

  • Satellite L650 - HDMI connection for external monitor

    I've linked the laptop to my Sony LCD TV via HDMI, no problem. I have a (Acer, 24-inch) LCD monitor that has a HDMI port also. I used it to play ps3 and xbox360 via HDMI connection, no problem. I have two lines HDMI 1.3. The two lines are working without any problems.

    However, when I connect my laptop to my LCD Acer just external LCD monitor can t work properly. I can barely see what is display on the monitor, very snowy. It's hard to describe. I took a photo but don't know where to download it here.

    I tried both HDMI lines, but both failed. I tried to change a few settings in the laptop, but nothing makes any difference. I'm looking for the driver for video card on the Web from Toshiba website and found that my current license is updated.

    I'm not a tech geek, but I think that I don't know something on the computer. Am I missing something here?

    Guys (and girls), please throw in an idea (tooth tell me to check if the connection is good, I don't already).
    Thank you

    Hey,.

    If you connect your laptop to external monitor and press the FN + F5 key combination what happens exactly? Pressing the FN + F5 key combination shows different options and you should test with external monitor only (not the clone image). If you work on external monitor doesn't do this work?

    In addition, you must connect the devices before starting their.

    Also, take a look in the BIOS and try to load the default settings. Make sure that that the HDMI cable is connected before starting Windows and check the status again.

    By the way: what operating system are you using exactly?

Maybe you are looking for